当前位置: 网站地图

所有标准资料

ASME P-5-2006 工业生产用蒸汽发生器的简要数据报告
ASME A112.19.16-2006 水磨石卫生设备
ASME A-1-2006 压力容器生产商的数据报告
ASME A-2-2006 一家生产商为另一家生产商制造的部分压力容器
ASME N-9-2006 厂制外壳部件
ASME B18.2.6-2006 用于结构的紧固件
ASME A112.14.6-2006 脂肪、油和油脂(FOG)的沉积系统
ASME HLW-7-2006 热水器和贮水罐的生产商部分数据报告
ASME B31.5-2006 制冷管道和传热组件
ASME B30.20-2006 下吊钩提升装置
ASME B18.10-2006 道轨用螺栓和螺母
ASME B31.4-2006 液烃和其他液体用管道输送系统
ASME B16.36-2006 孔板法兰
ASME CSD-1-2006 自动点火锅炉的控制和安全装置
ASME U-1A-2007 压力容器生产商的数据报告(仅可作为单室且完全由厂制的容器的替代报告)
ASME U-1-2007 压力容器生产商的数据报告
ASME A17.7-2007 基于性能的升降机和自动扶梯的安全规范.第1版
ASME MFC-16-2007 用电磁流量计测量封闭管路中的液体流量
ASME MFC-3Ma Addenda-2007 用孔口、管接头和文丘里管测量管道中的液体流量.勘误表
ASME BPVC Section 9-2007 ASME锅炉和压力容器规范.第9节:焊接和钎焊的合格要求
ASME BPVC Section 2 Part D Metric-2007 ASME锅炉和压力容器规范.第2节:材料.第D部分:特性(米制)
SAE CPGM1 J1349 Certified Power Engine Data for GM LY6 as used in 2007 Heavy Duty Full Size SUV's Level 1
SAE J1626 Braking, Stability, and Control Performance Test Procedures for Air- and Hydraulic-Brake-Equipped Trucks, Truc
SAE J518/2 Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 35 MPa to 40 MPa (Code
SAE J2561 Bluetooth Wireless Protocol for Automotive Applications
SAE CPGM2 J1349 Certified Power Engine Data for GM L92 as used in 2007 Fullsize SUV's (Yukon Denali, Yukon XL Denali) Le
SAE CPGM2 J1349 Certified Power Engine Data for GM L76 as used in 2007 Full Size Trucks (Silverado, Sierra) Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM L76 as used in 2007 Fullsize SUV's (Suburban, Yukon XL, Avalanche)
SAE CPGM2 J1349 Certified Power Engine Data for GM LY2 as used in 2007 Fullsize Trucks (Sierra, Silverado)
SAE CPGM1 J1349 Certified Power Engine Data for GM L76 as used in 2007 Fullsize SUV's (Suburban, Yukon XL, Avalanche) Le
SAE CPGM1 J1349 Certified Power Engine Date for GM L76 as used in 2007 Full Size Trucks (Silverado, Sierra)
SAE CPGM1 J1349 Certified Power Engine Data for GM LY2 as used in 2007 Fullsize Trucks (Sierra, Silverado)
SAE CPGM1 J1349 Certified Power Engine Data for GM L92 as used in 2007 Fullsize SUV's (Yukon Denali, Yukon XL Denali) Le
SAE J1812 Function Performance Status Classification for EMC Immunity Testing
SAE CPGM2 J1349 Certified Power Engine Data for GM LS3 as used in 2008 Corvette with Base Exhaust System - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LS3 as used in 2008 Corvette with Optional Valved Muffler Exhaust Sys
SAE CPGM1 J1349 Certified Power Engine Data for GM LS3 as used in 2008 Corvette with Optional Valved Muffler Exhaust Sys
SAE CPGM1 J1349 Certified Power Engine Data for GM LS3 as used in 2008 Corvette with Base Exhaust System - Level 1
SAE CPGM2 J1349 Certified Power Engine Data for GM L92 as used in 2007 Cadilac Escalade ESV, Cadilac Escalade EXT, Full
SAE CPGM2 J1349 Certified Power Engine Data for GM LY6 Heavy Duty Fullsize Trucks less than 10,000 lbs - Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM L92 as used in 2007 Cadilac Escalade ESV, Cadilac Escalade EXT, Full
SAE CPGM1 J1349 Certified Power Engine Data for GM LY6 as used in 2007 Heavy Duty Fullsize Truck less than 10,000 lbs -
SAE CPGM2 J1349 Certified Power Engine Data for GM LZ9 as used in 2008 Pontiac G6 Convertible - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LZ9 as used in 2008 Pontiac G6 Convertible - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LY6 as used in 2007 Heavy Duty Fullsize Trucks greater than 10,000 lb
SAE CPGM1 J1349 Certified Power Engine Data for GM LZ9 as used in 2008 Pontiac G6 Convertible - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LY6 as used in 2007 Heavy Duty Fullsize Trucks greater than 10,000 lb
SAE J2487 SAE No. 2 Friction Test Machine 3600 r/min Stepped Power Test
SAE CPGM2 J1349 Certified Power Engine Data for GM L61 as used in 2008 HHR - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM L61 as used in 2008 Cobalt - Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM L61 as used in 2008 HHR - Level 1
SAE CPGM1 J1349 Certified Power Engne Data for GM L61 as used in 2008 Cobalt - Level 1
SAE J2799 70 MPa Compressed Hydrogen Surface Vehicle Fuelling Connection Device and Optional Vehicle to Station Communic
SAE J2253 Test Procedures for Automotive Structural Composite Materials
SAE J2081 Test Procedure for Determining the Resistance of Safety-Glazing Materials, of Which One Surface is Plastic, to
SAE J1979 E/E Diagnostic Test Modes
SAE J2361 Lubricating Oil, Internal Combustion Engine, Preservation Break-In
SAE J2359 Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service
SAE J431 Automotive Gray Iron Castings
SAE J98 Personnel Protection for General Purpose Industrial Machines
SAE J1518 Three Point Hitch (Type A) Backhoe Personnel Protection
SAE CPGM2 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Manual Transmission Chevrolet HHR-Small Tr
SAE CPGM2 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Chevrolet Cobalt-Small Car Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Automatic Transmission Chevrolet HHR-Small
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT High Feature V6 as used in 2008 Cadillac STS Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LY7 High Feature V6 as used in 2008 Saturn Vue Level 2
SAE CPMG1 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Manual Transmission Chevrolet HHR-Small Tr
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT High Feature V6 as used in 2008 Cadillac CTS Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Manual Transmission Chevrolet HHR-Small Tr
SAE CPGM1 J1349 Certified Power Engine Data for GM LNF L850 as used in 2008.5 Automatic Transmission Chevrolet HHR-Small
SAE CPGM1 J1349 Certified Power Engine Data for GM LNF as used in 2008.5 Chevrolet Cobalt-Small Car Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LNF L850 2008.5 Chevrolet Cobalt-Small Car (Level 1)
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT High Feature V6 as used in 2008 Cadillac STS Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT High Feature V6 as used in 2008 Cadillac CTS Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LY7 High Feature V6 as used in 2008 Saturn Vue Level 1
SAE J2642 Recommended Practice for Developing Specifications for Automotive Thermoplastic Materials
SAE J2812 Road Load Tire Model Validation Procedure
SAE J1290 Automotive Hydraulic Brake System--Metric Tube Connections
SAE J2814 J2814-FireWire for Vehicle Applications
SAE J2813 J2813-Flexray For Vehicle Applications
SAE J1342 Test Method for Determining Power Consumption of Engine Cooling Fan Drive Systems
SAE J2790 Test Method for Evaluating the Electrical Resistance of Coolant System Hose Covers
SAE J2800 Laboratory Corrosion/Fatigue Testing of Vehicle Suspension Coil Springs
SAE J1204 Wheels--Recreational and Utility Trailer Test Procedure
SAE CPGM2 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Pontiac Solstice and Saturn Sky Level
SAE CPGM2 J1349 Certified Power Engine Data for GM LAT Ecotec as used in 2008 Saturn Vue Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet HHR Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet Cobalt Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet Cobalt Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LAT Ecotec as used in 2008 Saturn Vue Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Pontiac Solstice and Saturn Sky Level
SAE CPGM1 J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet HHR Level 1
SAE J1939/75 Application Layer - Generator Sets and Industrial
SAE J1113/11 Immunity to Conducted Transients on Power Leads
SAE J575 Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less than 2032 mm in Overall
SAE J2405 Low-Permeation Fuel Fill and Vent Tube
SAE J2047 Tire Performance Terminology
SAE J1297 Alternative Automotive Fuels
SAE J2727 HFC-134a Mobile Air Conditioning System Emission Chart
SAE J586 Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
SAE J1705 Low Water Tolerant Brake Fluids (NONCURRENT Jul 2007)
SAE J2560 Forward Lighting Halogen Bulb Performance Requirements for Motor Vehicles
SAE J2628 Characterization, Conducted Immunity
SAE J2356 A Graphical Model for Interactive Distributed Control
SAE CPGM2 J1349 Certified Power Engine Data for GM LLV as used in 2008 Chevrolet Colorado, GMC Canyon Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LL8 as used in 2008 Chevrolet Trailblazer, GMC Envoy, Saab 9-7x Level
SAE CPGM2 J1349 Certified Power Engine Data for GM LLR as used in 2008 Hummer H3 Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LLR as used in 2008 Chevrolet Colorado, GMC Canyon Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LLR as used in 2008 Chevrolet Colorado, GMC Canyon Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LL8 as used in 2008 Chevrolet Trailblazer, GMC Envoy, Saab 9-7x Level
SAE CPGM1 J1349 Certified Power Engine Data for GM LLR as used in 2008 Hummer H3 Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLV as used in 2008 Chevrolet Colorado, GMC Canyon Level 1
SAE J1747 Recommended Methods for Conducting Corrosion Tests in Hydrocarbon Fuels or Their Surrogates and Their Mixtures
SAE J211/1 Instrumentation for Impact Test - Part 1 - Electronic Instrumentation
SAE J1169 Measurement of Light Vehicle Exhaust Sound Level Under Stationary Conditions (Cancelled Jul 2007)
SAE J759 Lighting Identification Code
SAE J2745 Categorization and Properties of Advanced High Strength Automotive Sheet Steels
SAE J599 Lighting Inspection Code
SAE CPDC2 J1349 Certified Power Engine Data for DaimlerChrysler 2.4L / Dual VVT / I4 as used in 2008 Dodge Caliber SRT 4
SAE CPDC1 J1349 Certified Power Engine Data for DaimlerChrysler 2.4L / Dual VVT / I4 as used in 2008 Dodge Caliber SRT 4
SAE J190 Power Steering Pressure Hose--Wire Braid (NONCURRENT Aug 2007)
SAE J1260 Standard Oil Filter Test Oil
SAE J2635 Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim
SAE J1637 Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar
SAE J1644 Metallic Tube Connections for Fluid Power and General Use--Test Methods for Threaded Hydraulic Fluid Power Con
SAE J2808 Road/Lane Departure Warning Systems: Information for the Human Interface
SAE J2633 Wheel and Wheel Trim Weathering Testing for Paint Coatings
SAE J1916 Engine Water Pump Remanufacture Procedures and Acceptance Criteria (NONCURRENT Aug 2007)
SAE J1890 Performance Assurance of Remanufactured, Hydraulically-Operated Rack and Pinion Steering Gears (NONCURRENT Aug
SAE CPGM2 J1349 Certified Power Engine Data for GM LE5 as used in 2008 Pontiac G6 Level 2
SAE J2723 Engine Power Test Code - Engine Power and Torque Certification
SAE J2238 Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used In Inflatable Restraint Systems
SAE J840 Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining Assemblies
SAE J2706 Hybrid III Six-Year-Old Child Dummy User's Manual
SAE J2282 Distributed Lighting Systems (DLS)
SAE J2501 Round, Screened and Unscreened, 60 V and 600 V Multi-Core Sheathed Cables
SAE J533 Flares for Tubing
SAE J2820 J2820-Modeling and Simulation Methods for Automotive Electrical/Electronic Components and Systems
SAE J814 Engine Coolants
SAE J314 Felts--Wool and Part Wool
SAE J631 Radiator Nomenclature
SAE J1019 Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assembl
SAE J1647 Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity
SAE J2354 Message Sets for Advanced Traveler Information System (Atis)
SAE CPGM2 J1349 Certified Power Engine Data as used in GM LE5 Chevrolet Malibu / Saturn Aura Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LE5 as used in 2008 Chevrolet Malibu / 2008 Saturn Aura Level 1
SAE CPDC2 J1349 Certified Power Engine Data for DaimlerChrysler as used in 2008 Dodge Viper SRT 10 Level 2
SAE CPDC1 J1349 Certified Power Engine Data for DaimlerChrysler as used in 2008 Dodge Viper SRT 10 Level 1
SAE J2184 Vehicle Lift Points for Service Garage Lifting
SAE J882 Test Method for Measuring Thickness of Automotive Textiles and Plastics
SAE J1748 Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surro
SAE J1754/1 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced--Part 1: Procurement Document
SAE J1754/2 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information
SAE J1754/3 Hose Assemblies, Hydraulic, J517 100R Series--Part 3: Procurement and Ordering Information
SAE J527 Brazed Double Wall Low-Carbon Steel Tubing
SAE J2821 Standard Text File Format for Exchange of Stress-Strain Data from Tensile, Compression, or Fatigue Tests
SAE J1406 Application of Hydraulic Brake Hose to Motor Vehicles--Wheel End and Axle
SAE USCAR2-5 Performance Specification for Automotive Electrical Connector Systems
SAE USCAR27 Specification for Testing Gas Discharge Light Source Subsystem
SAE USCAR35 Test Procedures for Evaluating Bolt-Load Retention of Magnesium Alloy
SAE J1939 Recommended Practice for a Serial Control and Communications Vehicle Network
SAE J517 Hydraulic Hose
SAE J2824 J2824-Goldilocks Serial Communication Protocol Design
SAE J2056/3 Selection of Transmission Media
SAE J2810 HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems
SAE J2809 Honda Diagnostic Serial Data Link Protocol--ABS/VSA System
SAE J915 Automatic Transmissions--Manual Control Sequence
SAE J2604 Recommended Test Procedure for Powered Gas Brake Control Systems
SAE J2603 Recommended Practice for Powered Gas Brake Control Systems
SAE J2208 Park Standard for Automatic Transmissions
SAE J1236 Cast Iron Sealing Rings (Metric)
SAE J1879 Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications
SAE J1733 Sign Convention for Vehicle Crash Testing
SAE J912 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
SAE J369 Flammability of Polymeric Interior Materials--Horizontal Test Method
SAE J1717 Interior Automotive Plastic Part Testing (NONCURRENT Nov 2007)
SAE J2617 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
SAE J300 Engine Oil Viscosity Classification
SAE J2264 Chassis Dynamometer Simulation of Road Load Using Coastdown Techniques
SAE J247 Instrumentation for Measuring Acoustic Impulses Within Vehicles
SAE J704 Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs - Truck and Bus
SAE J1447 Fire-Resistant Fluid Usage in Hydraulic Systems of Off-Road Work Machines
SAE J1333 Hydraulic Cylinder Rod Corrosion Test
SAE J10 Automotive and Off-Highway Air Brake Reservoir Performance and Identification Requirements - Truck and Bus
SAE J1305 Two-Block Warning and Limit Systems in Lifting Crane Service
SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
SAE J525 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J1330 Photometry Laboratory Accuracy Guidelines
SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
SAE J2012 Diagnostic Trouble Code Definitions
SAE J846 Coding Systems for Identification of Fluid Conductors and Connectors
SAE J2784 FMVSS 135 Inertia Dynamometer Test Procedure
SAE J435 Automotive Steel Castings
SAE J1887 Automotive Compacted Graphite Iron Castings
SAE J1942/1 Qualified Hoses for Marine Applications
SAE J377 Vehicular Traffic Sound Signaling Devices (Horns)
SAE J2244/4 Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing--Pa
SAE J2244/3 Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Seal
SAE J2244/1 Connections for Fluid Power and General Use--Ports and Stud Ends With ISO 261 Threads and O-Ring Sealing Par
SAE J2244/2 Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Par
SAE J2579 Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles
SAE J2363 Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines (Cancelled Jan 2008)
SAE J2362 Lubricating Oil, Automotive Engine, API Service SM for Military Administrative Service (Cancelled Jan 2008)
SAE J1885 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-A
SAE J1960 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc App
SAE J2076 High-Temperature Power Steering Return Hose--Low Pressure
SAE J2050 High-Temperature Power Steering Pressure Hose
SAE J941 Motor Vehicle Drivers' Eye Locations
SAE J2818 Keyword Protocol 1281
SAE J2834 Ride Index Structure and Development Methodology
SAE J670 Vehicle Dynamics Terminology
SAE J1292 Automobile and Motor Coach Wiring
SAE J1939/71 Vehicle Application Layer (Through February 2007)
SAE J1873 Moisture Transmission Test Procedure--Hydraulic Brake Hose Assemblies
SAE J2819 TP2.0 Vehicle Diagnostic Protocol
SAE J585 Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J1715 Hybrid Electric Vehicle (HEV) & Electric Vehicle (EV) Terminology
SAE J1766 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J2467 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
SAE J2435 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading
SAE J2016 Chemical Stress Resistance of Polymers (Cancelled Feb 2008, Superseded by ISO 11403-3)
SAE J1828 Uniform Reference and Dimensional Guidelines for Collision Repair
SAE J2625 Automotive Vehicle Brake Squeal Test Recommend Practice
SAE J1244 Oil Cooler Nomenclature and Glossary
SAE J1082 Fuel Economy Measurement Road Test Procedure
SAE J360 Truck and Bus Grade Parking Performance Test Procedure
SAE CPGM2 J1349 Certified Power Engine Data for GM LE8 as used in 2009 Chevrolet HHR Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LAP as used in 2009 Chevrolet Cobalt Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LE8 as used in 2009 Chevrolet HHR E85 Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LE8 as used in 2009 Chevrolet HHR E85 Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LE8 as used in 2009 Chevrolet HHR Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LAP as used in 2009 Chevrolet Cobalt Level 1
SAE J1729 Parking Brake Drawbar Pull Test Procedure--Truck and Bus
SAE J1061 Surface Discontinuities on General Application Bolts, Screws, and Studs
SAE J2716 SENT - Single Edge Nibble Transmission for Automotive Applications
SAE J694 Disc Wheel/Hub or Drum Interface Dimensions--Truck and Bus
SAE J1349 Engine Power Test Code - Spark Ignition and Compression Ignition - Net Power Rating
SAE CPGM2 J1349 Certified Power Engine Data for GM LE9 as used in 2009 Chevrolet HHR Operating on E85 Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LE9 as used in 2009 Chevrolet HHR
SAE CPGM1 J1349 Certified Power Engine Data for GM LE9 as used in 2009 Chevrolet HHR Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LE9 as used in 2009 Chevrolet HHR Operating on E85 Level 1
SAE J826 Devices for Use in Defining and Measuring Vehicle Seating Accommodation
SAE J2600 Compressed Hydrogen Surface Vehicle Refueling Connection Devices
SAE CPGM2 J1349 Certified Power Engine Data for GM LS4 as used in 2008 Chevrolet Impala / Chevrolet Monte Carlo / Pontia
SAE CPGM2 J1349 Certified Power Engine Data for LS4 as used in 2008 Buick LaCrosse - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for LH6 as used in 2008 Saab 9-7X / GMC Envoy / Chevrolet Trailblazer - Leve
SAE CPGM2 J1349 Certified Power Engine Data for GM LFA as used in 2008 Chevrolet Tahoe / 2008 GMC Yukon AHSII 2-Mode Hyb
SAE CPGM2 J1349 Certified Power Engine Data for GM LH8 as used in 2008 Hummer H3 - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM L92 as used in 2008 Hummer H2 - Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM L92 as used in 2008 Hummer H2 - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LH8 as used in 2008 Hummer H3 - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LH6 as used in 2008 Saab 9-7X / GMC Envoy / Chevrolet Trailblazer - L
SAE CPGM1 J1349 Certified Power Engine Data for GM LFA as used in 2008 Chevrolet Tahoe / 2008 GMC Yukon AHSII 2-Mode Hyb
SAE CPGM1 J1349 Certified Power Engine Data for GM LS4 as used in 2008 Chevrolet Impala / Chevrolet Monte Carlo / Pontia
SAE CPGM1 J1349 Certified Power Engine Data for GM LS4 as used in 2008 Buick LaCrosse - Level 1
SAE J2838 FULL ADAPTIVE FORWARD LIGHTING SYSTEM
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2010 Fusion - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 Explorer / Sport Trac - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 F150 - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford Expedition / Lincoln Navigator - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 F150 5.4L - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 F150 FFV - Level 2
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 Explorer / Sport Trac - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 Ford Expedition / Lincoln Navigator - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 F150 - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 F150 5.4 L - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 F150 FFV - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2010 Fusion - Level 1
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2010 Fusion - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 Escape - Level 2
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 Escape - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2010 Fusion - Level 1
SAE J961 Marine Control Cable Connection--Engine Throttle Lever
SAE J960 Marine Control Cable Connection--Engine Clutch Lever
SAE J321 Tire Guards for Operator Protection--Earthmoving Haulage Machines (Cancelled Apr 2008, Superseded by ISO 3457)
SAE J2719 Information Report on the Development of a Hydrogen Quality Guideline for Fuel Cell Vehicles
SAE J1849 Emergency Vehicle Sirens
SAE J1062 Snowmobile Passenger Handgrips
SAE J1084 Operator Protective Structure Performance Criteria for Certain Forestry Equipment (Cancelled Apr 2008, Superse
SAE J2840 High Voltage Shielded Primary Cable
SAE J2807 Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight Rating
SAE CPGM2 J1349 Certified Power Engine Data for GM as used in 2009 Chevrolet Corvette ZR1 - Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM as used in 2009 Chevrolet Corvette ZR1 - Level 1
SAE J2513 Earthmoving Machinery-Coupling of Attachments to Skid Steer Loaders (Cancelled May 2008, Superseded by ISO 244
SAE J1531 Seam Damage Test Procedure
SAE J1681 Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing
SAE J1460/1 Human Mechanical Impact Response Characteristics--Dynamic Response of the Human Abdomen
SAE J2450/1 SAE J2450 Supplemental Training Document
SAE J1570 Rubber Dust Boots for the Hydraulic Disc Brake Piston
SAE J1603 Rubber Seals for Hydraulic Disc Brake Cylinders
SAE J861 Method of Testing Resistance to Crocking of Organic Trim Materials
SAE J200 Classification System for Rubber Materials
SAE J534 Lubrication Fittings
SAE J2530 Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures
SAE J1298 Connections for Fluid Power and General Use--Hydraulic Couplings--Diagnostic Port Sizes and Locations
SAE J883 Test Method for Determining Dimensional Stability of Automotive Textile Materials
SAE J748 Hydraulic Directional Control Valves, 3000 psi Maximum
SAE J1737 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies
SAE J1167 Motorcycle Stop Lamp Switch
SAE J1287 Measurement of Exhaust Sound Pressure Levels of Stationary Motorcycles
SAE J2599 Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements
SAE ARD5568 Alternate Means of Compliance
SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Materials By Speciation
SAE J2073 Automotive Starter Remanufacturing Procedures (NONCURRENT Jun 2008)
SAE J1654 High Voltage Primary Cable
SAE J1980 Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Frontal Airbags
SAE J1460/2 Human Mechanical Impact Response Characteristics--Response of the Human Neck to Inertial Loading by the Head
SAE J2732 Motor Vehicle Seat Dimensions
SAE CPGM2 J1349 Certified Power Engine Data for GM LSA as used in 2009 Cadillac CTSv Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LSA as used in 2009 Cadillac CTSv Level 1
SAE J2288 Life Cycle Testing of Electric Vehicle Battery Modules
SAE J2226 Internal Combustion Engines--Piston Rings--Steel Rectangular Rings (Cancelled Jun 2008)
SAE J1997 Internal Combustion Engines--Piston Rings--Rectangular Rings (Cancelled Jun 2008)
SAE J1996 Internal Combustion Engines--Piston Rings--Quality Requirements (Cancelled Jun 2008)
SAE J1999 Internal Combustion Engines--Piston Rings--Scraper Rings (Cancelled Jun 2008)
SAE J1998 Internal Combustion Engines--Piston Rings--Rectangular Rings With Narrow Ring Width (Cancelled Jun 2008)
SAE J2003 Internal Combustion Engines--Piston Rings Coil Spring Loaded Oil Control Rings (Cancelled Jun 2008)
SAE J2004 Internal Combustion Engines--Piston Rings--Expander/Segment Oil Control Rings (Cancelled Jun 2008)
SAE J2000 Internal Combustion Engines--Piston Rings--Keystone Rings (Cancelled Jun 2008)
SAE J2002 Internal Combustion Engines--Piston Rings--Oil Control Rings (Cancelled Jun 2008)
SAE J2001 Internal Combustion Engines--Piston Rings--Half Keystone Rings (Cancelled Jun 2008)
SAE J1797 Recommended Practice for Packaging of Electric Vehicle Battery Modules
SAE J1588 Internal Combustion Engines--Piston Rings--Vocabulary (Cancelled Jun 2008)
SAE J1589 Internal Combustion Engines--Piston Rings--Inspection Measuring Principles (Cancelled Jun 2008)
SAE J1591 Internal Combustion Engines--Piston Rings--General Specifications (Cancelled Jun 2008)
SAE J1590 Internal Combustion Engines--Piston Rings--Material Specifications (Cancelled Jun 2008)
SAE J2343 Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles
SAE USCAR5-3 AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL
SAE J2293/1 Energy Transfer System for Electric Vehicles--Part 1: Functional Requirements and System Architectures
SAE J2293/2 Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture
SAE J1798 Recommended Practice for Performance Rating of Electric Vehicle Battery Modules
SAE J1497 Design Guide for Formed-in-Place Gaskets (Cancelled Jul 2008)
SAE J588 Turn Signal Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width
SAE J2860 User's Manual for the Hybrid III Large Male Test Dummy (EA-26)
SAE J2861 CRABI Twelve- and Eighteen-Month-Old Infant Dummies User's Manual (EA-27)
SAE J2862 User's Manual for the Small Adult Female Hybrid III Test Dummy (EA-25)
SAE J2858 Hybrid III Ten-Year-Old Child Dummy User's Manual (EA-34)
SAE J2859 Hybrid III Large Male Drawing Package (EA-32)
SAE J2854 User's Guide for the Six Month Old Infant Dummy - CRABI (EA-28)
SAE J2855 Instrumented Arm User's Manual (EA-36)
SAE J1012 Operator Enclosure Pressurization System Test Procedure
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 Lincoln MKS Premium Fuel - Level 2
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 Lincoln MKS - Level 2
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 Lincoln MKS Premium Fuel - Level 1
SAE CPFD1 J1349 Certified Power Engine Data for Ford as used in 2009 Lincoln MKS - Level 1
SAE J90 Standard Classification System for Nonmetallic Automotive Gasket Materials (Cancelled Jul 2008)
SAE J616 Engine Foot Mounting (Front and Rear) (Cancelled Jul 2008)
SAE J615 Engine Mountings (Cancelled Jul 2008)
SAE J2830 Process for Comprehension Testing of In-Vehicle Icons
SAE J2866 SafeCAN: Using CAN in Real-time Deterministic and Safety-critical Applications
SAE J384 Motor Vehicle Seat Belt Anchorages-Test Procedure
SAE J383 Motor Vehicle Seat Belt Anchorages--Design Recommendations
SAE J385 Motor Vehicle Seat Belt Anchorages-Performance Requirements
SAE J1512 Manual Slack Adjuster Performance Requirements
SAE CPFD2 J1349 Certified Power Engine Data for Ford as used in 2009 Ford Flex - Level 2
SAE CPFD1 J1349 Certified Power Engine Date for Ford as used in 2009 Ford Flex - Level 1
SAE J2229 Accelerated Exposure of Automotive Interior Trim Materials Using an Outdoor Under Glass Variable Angle Control
SAE J1493 Guarding of Starter System Energization
SAE J1587 Electronic Data Interchange Between Microcomputer Systems in Heavy-Duty Vehicle Applications
SAE J2289 Electric-Drive Battery Pack System: Functional Guidelines
SAE J2867 Laboratory Testing of Vehicle Electric Cooling Fan Assemblies for Airflow Performance
SAE J2534/1 Recommended Practice for Pass-Thru Vehicle Programming
SAE J587 License Plate Illumination Devices (Rear Registration Plate Illumination Devices)
SAE J2382 Video Based Light Measurement Techniques
SAE J2534/3 Conformance Test Cases
SAE J1308 Fan Guard for Off-Road Machines
SAE J2120 Personal Watercraft--Electrical Systems
SAE J1994 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Heat Transfer and Pressure Drop Performance
SAE J2034 Personal Watercraft Ventilation Systems
SAE J2046 Personal Watercraft Fuel Systems
SAE J1973 Personal Watercraft--Flotation
SAE J1634 Electric Vehicle Energy Consumption and Range Test Procedure (Cancelled Oct 2002)
SAE J2039 Side Turn Signal Lamps for Large Vehicles
SAE J1939/82 Compliance--Truck and Bus
SAE J2744 Requirements for Built-In Service Port for On Board Diagnostics
SAE J2870 Standard Practice on Labeling of non-tempered vehicle windows
SAE J1597 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J272 Vehicle Identification Number Systems
SAE J1939/15 Reduced Physical Layer, 250K bits/sec, UN-Shielded Twisted Pair (UTP)
SAE J971 Brake Power Rating Test Code--Commercial Vehicle Inertia Dynamometer (Cancelled Aug 2008)
SAE J2871 Standard Practice on Markings of Modified Glazings
SAE J1269 Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires
SAE J2475 Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus
SAE J2817 Definition and Measurement of Torque Biasing Differentials
SAE USCAR37 HIGH VOLTAGE CONNECTOR PERFORMANCE SUPPLEMENT TO SAE/USCAR-2
SAE J2763 Test Procedure for Determining Refrigerant Emissions from Mobile Air Conditioning Systems
SAE J1703 Motor Vehicle Brake Fluid
SAE J4004 Positioning the H-Point Design Tool - Seating Reference Point and Seat Track Length
SAE J2320 Discharge Signal Lighting System
SAE J2577 Heavy Duty Lamp Electrical Connector Standard
SAE J2495 Thermal Containment Efficiency of Sleeve Materials
SAE J2302 Thermal Effectiveness of Sleeve Insulation
SAE J2643 Standard Reference Elastomers (Sre) for Characterizing the Effect of Liquids on Vulcanized Rubbers
SAE J151 Pressure Relief for Cooling System
SAE J1704 Borate Ester Based Brake Fluids
SAE J1703 Motor Vehicle Brake Fluid
SAE J1704 Borate Ester Based Brake Fluids
SAE J2791 HFC-134a Refrigerant Electronic Leak Detectors, Minimum Performance Criteria
SAE USCAR25-1 Electrical Connector Assembly Ergonomic Design Criteria
SAE J2042 Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1527 Marine Fuel Hoses
SAE J2805 Measurement of Noise Emitted by Accelerating Road Vehicles
SAE J2190 Enhanced E/E Diagnostic Test Modes (Cancelled Oct 2008)
SAE J1853 Hand Winches--Boat Trailer Type
SAE J2640 General Automotive Embedded Software Design Requirements
SAE J1715 Hybrid Electric Vehicle (HEV) & Electric Vehicle (EV) Terminology
SAE CPFD2 J1349 Certified Power Engine Data for Ford 5.4L as used in 2010 Shelby GT500 Mustant
SAE CPFD1 J1349 Certified Power Engine Data for Ford 5.4L as used in 2010 Shelby GT500 Mustang - Level 1
SAE J551/5 Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles,
SAE J2880 Recommended Green Racing Protocols
SAE J2765 Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test
SAE J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms--Equivalent to ISO/TR
SAE USCAR21-2 Performance Specification for Cable-to-Terminal Electrical Crimps
SAE J1708 Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications
SAE J4003 H-Point Machine (HPM-II)--Procedure for H-Point Determination--Benchmarking Vehicle Seats
SAE J2883 Laboratory Measurement of Random Incidence Sound Absorption Tests Using a Small Reverberation Room
SAE J656 Automotive Brake Definitions and Nomenclature
SAE J941 Motor Vehicle Drivers' Eye Locations
SAE J2130/1 Identification of Self-Propelled Sweepers and Cleaning Equipment Part 1--Machines with a Gross Vehicle Mass
SAE J2130/2 Identification of Self-Propelled Sweepers and Cleaning Equipment Part 2--Machines with a Gross Vehicle Mass
SAE J1805 Sound Power Level Measurements of Work Machines--Static and In-Place Dynamic Methods
SAE J2703 Cranes--Access and Egress
SAE J2572 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuell
SAE J1492 Measurement of Light Vehicle Stationary Exhaust System Sound Level Engine Speed Sweep Method
SAE J1545 Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
SAE J400 Test for Chip Resistance of Surface Coatings
SAE J1767 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials
SAE J1573 OEM Plastic Parts Repair
SAE J849 Connection and Accessory Locations for Towing Multiple Trailers--Truck and Bus
SAE J1555 Recommended Practice for Optimizing Automobile Damageability and Repairability
SAE J1476 Parking Brake Structural Integrity Test Procedure Vehicles Over 4500 kg (10 000 lb) GVWR - Truck and Bus
SAE J2527 Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradi
SAE J2412 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
SAE J2591 Adaptive Forward Lighting System
SAE J1424 Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR
SAE J702 Brake and Electrical Connection Locations--Truck-Tractor and Truck-Trailer
SAE J1246 Measuring the Radius of Curvature of Convex Mirrors
SAE J826 Devices for Use in Defining and Measuring Vehicle Seating Accommodation
SAE J1962 Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001
SAE J635 Fan Hub Bolt Circles and Pilot Holes
SAE J211/2 Instrumentation for Impact Test--Part 2: Photographic Instrumentation
SAE J595 Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
SAE J2337/3 Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs With Iso 261 Threads and O-Ri
SAE J2337/2 Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs With Iso 261 Threads and O-
SAE J2792 Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals
SAE J442 Test Strip, Holder, and Gage for Shot Peening
SAE J641 Hydrodynamic Drives Terminology
SAE J517 Hydraulic Hose
SAE J1819 Securing Child Restraint Systems in Motor Vehicles
SAE J1718 Measurement of Hydrogen Gas Emission from Battery-Powered Passenger Cars and Light Trucks During Battery Charg
SAE J1453/2 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions
SAE J2749 High Strain Rate Tensile Testing of Polymers
SAE J2241 Automotive Starter Drive Remanufacturing Procedures (NONCURRENT Nov 2008)
SAE J2242 Automotive Starter Solenoid Remanufacturing Procedures (NONCURRENT Nov 2008)
SAE J2240 Starter Armature Remanufacturing Procedures (NONCURRENT Nov 2008)
SAE J1351 Hot Odor Test for Insulation Materials
SAE J1392 Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet
SAE J2457 Air Quality for Air Braked Vehicles (Cancelled Dec 2008)
SAE J1670 Type "F" Clamps for Plumbing Applications
SAE J1939/84 OBD Communications Compliance Test Cases for Heavy Duty Components and Vehicles
SAE J1939/03 On Board Diagnostics Implementation Guide
SAE J339 Seat Belt Hardware Webbing Abrasion Test Procedure
SAE J114 Seat Belt Hardware Webbing Abrasion Performance Requirements
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac CTS Sedan - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2011 Cadillac CTS Coupe - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2010 Chevrolet Camero - Level 2
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac STS
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac CTS Wagon - Level 2
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT as used in 2010 Chevrolet Camero - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac STS - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac CTS Wagon - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac CTS Sedan - Level 1
SAE CPGM1 J1349 Certified Power Engine Data for GM LLT as used in 2011 Cadillac CTS Coupe - Level 1
SAE J2263 Road Load Measurement Using Onboard Anemometry and Coastdown Techniques
SAE J760 Dimensional Specifications for General Service Sealed Lighting Units*HS-34/08* (Cancelled Dec 2008)
SAE J2183 60 V and 600 V Single-Core Cables
SAE J1678 Low Voltage Ultra Thin Wall Primary Cable
SAE J2847/3 Communication between Plug-in Vehicles and the Utility Grid for Reverse Power Flow
SAE J2836/3 Use Cases for Communication between Plug-in Vehicles and the Utility Grid for Reverse Power Flow
SAE J1802 Brake Block Effectiveness Rating
SAE CPGM2 J1349 Certified Power Engine Data for GM LLT as used in 2010 Cadillac CTS Wagon - Level 2
SAE J1942/1 Qualified Hoses for Marine Applications
SAE J30 Fuel and Oil Hoses
SAE J212 Brake System Dynamometer Test Procedures--Passenger Car (Cancelled Dec 2008)
SAE J411 Carbon and Alloy Steels *HS-30/2000*
SAE J2579 Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles
SAE J1461 Manual Slack Adjuster Test Procedure
SAE J2579 Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles
SAE J300 Engine Oil Viscosity Classification
SAE J1263 Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques
SAE J2578 Recommended Practice for General Fuel Cell Vehicle Safety
SAE J1453 Fitting--O-Ring Face Seal (Cancelled Jan 2009, Superseded by J1453/1, J1453/2, J1453/3)
SAE J1673 High Voltage Automotive Wiring Assembly Design
SAE J919 Sound Measurement--Off-Road Work Machines--Operator--Singular Type
SAE J1562 Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet
SAE J1494 Battery Booster Cables
SAE J1318 Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles (Cancelled Jan 2009
SAE J1739 Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analys
SAE J1397 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J2578 Recommended Practice for General Fuel Cell Vehicle Safety
SAE J1442 High-Strength, Hot-Rolled Steel Bars
SAE J2889 Vehicle Sound Measurement at Low Speeds
SAE J1939/71 Vehicle Application Layer (Through February 2008)
SAE J2725 Road Vehicles--Friction Materials--Elastic Properties Measurements
SAE J2271 Ship Systems and Equipment--Part Standard for Studs--Continuous and Double End (Inch Series)
SAE J404 Chemical Compositions of SAE Alloy Steels
SAE J381 Windshield Defrosting Systems Test Procedure and Performance Requirements--Trucks, Buses, and Multipurpose Vehi
SAE J2799 70 MPa Compressed Hydrogen Surface Vehicle Fuelling Connection Device and Optional Vehicle to Station Communic
SAE J299 Stopping Distance Test Procedure
DIN EN 1114-3-2010 橡胶和塑料机械.挤压机和挤压线.第3部分:拉制的安全性要求.德文版本EN 1114-3-2001+A1-2008
DIN EN 939-2010 人类用水处理用化学试剂.盐酸.德文版本EN 939-2009
DIN EN 1417-2010 橡胶机械和塑料机械.双辊轧机.安全性要求.德文版本EN 1417-1996+A1-2008
DIN EN 1276-2010 化学消毒剂和防腐剂.用于食品、工业,家庭和有规章制度领域的化学消毒剂和防腐剂杀菌活性评估用定量悬浮试验.试验方法和要求(相位2,步骤1).德文版本EN 1276-2009
DIN EN 13418-2010 橡胶和塑料机械.薄膜或薄板用卷切机.安全性要求.德文版本EN 13418-2004+A1-2008
DIN EN 15826-2010 釉瓷和搪瓷.术语.德文版本EN 15826-2009
DIN EN 14232-2010 高级工艺陶瓷.术语,定义和缩略语.三种语言版本EN 14232-2009
DIN 52295-2010 玻璃检验. 容器的摆锤撞击试验. 属性检验和品种检验
DIN SPEC 1107-2010 液体比重测定法.用雪质等级设备测量融雪形成的水当量.德文版本CEN/TR 15996-2010
DIN SPEC 4002-13-2010 产品数据交换的属性及其范围.第13部分:ISO/TS 29002-5的识别器任务
DIN EN 302435-1-2010 电磁兼容性和射频频谱管理(ERM).短程装置(SRD).用超宽带(UWB)技术的SRD设备的技术特性.工作频带为2.2GHz~8GHz的组装材料的分析和设备分类.第1部分:技术特性和试验方法
DIN EN 300698-1-2010 电磁兼容性和射频频谱管理(ERM).国内水道用运行在VHF波段的海上移动业务用无线电话发射机和接收机.第1部分:技术特征和测量方法(采用英文版本EN 300698-1 V1.4.1(2009-12)
DIN EN 300698-2-2010 电磁兼容性和射频频谱管理(ERM).国内水道用运行在VHF波段的海上移动业务用无线电话发射机和接收机.第2部分:按照R&TTE指令3.2条协调的欧洲标准(采用标准 EN 300698-2 V1.2.
DIN EN 300373-3-2010 电磁兼容性和无线电射频管理(ERM).中频和高频波段应用海上移动发射器和接收器.第3部分:按照R&TTE指令3.3条协调的欧洲标.E类数字选择性呼叫(DSC)用集成设备或相关设备(采用标准EN 30
DIN EN 62379-2-2010 网络化数字音频和视频产品的通用控制接口.第2部分:音频(IEC 62379-2-2008).德文版本EN 62379-2-2009
DIN EN 302435-2-2010 电磁兼容性和射频频谱管理(ERM).短程装置(SRD).用超宽带(UWB)技术的SRD设备的技术特性.工作频带为2.2GHz~8.5GHz的组装材料的分析和设备分类.第2部分:涵盖R&TTE指令3.
DIN EN 61754-15-2010 光纤互连设备和无源元件.光纤连接器接口.第15部分:LSH型连接器系列(IEC 61754-15-2009).德文版本EN 61754-15-2009
DIN EN 61000-4-34-2010 电磁兼容性(EMC).第4-34部分:试验和测量技术.输入电流超过每相16 A设备的电压降、短时中断及电压变化抗扰度试验(IEC 61000-4-34-2005+A1-2009 + Cor. -
DIN EN 62480-2010 多媒体家用网络.网络适配器用网络接口(IEC 62480-2008).德文版本EN 62480-2009
DIN EN 62386-204-2010 数字可寻址照明接口.第204部分:控制装置用特殊要求.低电压卤钨灯(装置类型 3)
DIN EN 50131-1 Bb.1-2010 报警系统.术语和定义.德文版本CLC/TR 50531-2009
DIN EN 208-2010 个人护目镜.激光器和激光系统调节器工作用护目镜(激光调节器护目镜).德文版本EN 208-2009
DIN EN 207-2010 个人护目镜.防激光辐射滤光镜和护目镜(激光护目镜).德文版本EN 207-2009
DIN EN 1076-2010 工作场所暴露.用泵吸附取样器对气体和蒸汽测定用程序.要求和试验方法
DIN EN ISO 10993-9-2010 医疗器械的生物学评价 第9部分:潜在降解产物的识别与量化框架
DIN EN ISO 8362-1-2010 注射容器及附件.第1部分:玻璃管注射瓶(ISO 8362-1-2009).德文和英文版本EN ISO 8362-1-2009
DIN EN ISO 21969-2010 与医疗气体系统一起使用的高压柔性连接(ISO 21969-2009).德文版本EN ISO 21969-2009
DIN EN ISO 10993-1-2010 医疗器械的生物学评价.第1部分:在风险管理系统内的评价与试验
DIN EN 1315-2010 圆木的尺寸分类.德文版本EN 1315-2010
DIN EN 1656-2010 化学消毒剂和防腐剂.评估兽医学领域用化学杀菌剂和防腐剂的杀菌活性的定量悬浮液试验.试验方法和要求(第2阶段/第1步); 德文版本 EN 1656-2009
DIN ISO 5707-2010 挤奶机械设备.结构和性能(ISO 5707-2007)
DIN ISO 6690-2010 挤奶机械设备.机械试验(ISO 6690-2007)
DIN EN 62386-202-2010 数字可寻址照明接口.第202部分:控制装置的特殊要求.自控制应急照明(装置类型1)(IEC 62386-202-2009).德文版本EN 62386-202-2009
DIN EN 61020-1-2010 电气和电子设备用电动机械开关.第1部分:通用规范(IEC 61020-1-2009).德文版本EN 61020-1-2009
DIN 15765-2010 娱乐技术.移动产品和娱乐技术用多芯电缆系统
DIN EN 62040-3/A11-2010 不间断电源系统(UPS).第3部分:规定性能的方法和试验要求.德文版本EN 62040-3-2001/A11-2009
DIN EN 62386-201-2010 数字可寻址照明接口.第201部分:控制装置的特殊要求.荧光灯(装置型号0)(IEC 62386-201-2009).德文版本EN 62386-201-2009
DIN EN 61076-2-101-2010 电子设备连接器.产品要求.第2-101部分:带螺钉锁紧的M12连接器的详细规范(IEC 61076-2-101-2008).德文版本EN 61076-2-101-2008
DIN EN 62386-203-2010 数字可寻址照明接口.第203部分:控制装置的特殊要求.放电灯(荧光灯除外)(装置类型2)(IEC 62386-203:2009).德文版本EN 62386-203-2009
DIN EN 61869-1-2010 仪表变压器.第1部分:一般要求(IEC 61869-1-2007,修改).德文版本EN 61869-1-2009
DIN EN 62386-102-2010 数字可寻址照明接口.第102部分:一般要求.控制装置(IEC 62386-102-2009).德文版本EN 62386-102-2009
DIN EN 62386-101-2010 数字可寻址照明接口.第101部分:一般要求.系统(IEC 62386-101-2009).德文版本EN 62386-101-2009
DIN EN 62501-2010 高电压直流(HVDC)电力传输用电压源换流器(VSC)电子管.电气测试
DIN CLC/TS 61836-2010 太阳光伏能源系统.术语、定义和符号(IEC/TS 61836-2007).德文版本CLC/TS 61836-2009
DIN EN 267-2010 液体燃料用自动强制通风燃烧器.德文版本EN 267-2009
DIN EN 15719-2010 卫生用具.冲击改良型共挤ABS/丙烯酸薄板材制成的浴缸.要求和试验方法.德文版本EN 15719-2009
DIN EN 15715-2010 绝热产品.防火试验用安装和固定说明书.工厂制品.德文版本EN 15715-2009
DIN EN 14636-1-2010 无压排水和污水用塑料管道系统.聚酯树脂混凝土(PRC).第1部分:管道和带有柔性接头的配件.德文版本EN 14636-1-2009
DIN EN 15254-5-2010 耐火试验结果的扩展应用.非承重墙.第5部分:金属夹芯板结构.德文版本EN 15254-5-2009
DIN 1211-3-2010 交错人孔阶梯用铁爬梯.第3部分:螺栓连接的铁爬梯
DIN EN 14307-2010 建筑设备和工业设施用隔热制品.工厂制挤压泡沫聚苯乙烯(XPS)产品.规范
DIN EN 14304-2010 建筑设备和工业设施用隔热制品.工厂制造的柔性泡沫材料(FEF)产品.规范
DIN-Fachbericht CEN/TR 15739-2010 预制混凝土制品.混凝土抹面.鉴定.德文版本CEN/TR 15739-2008
DIN EN ISO 1452-3-2010 供水、地下及地上压力排水和污水用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第3部分:配件(ISO 1452-3-2009).德文版本EN ISO 1452-3-2009
DIN EN ISO 1452-1-2010 供水、地下及地上压力排水和污水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:总则(ISO 1452-1-2009).德文版本EN ISO 1452-1-2009
DIN EN 13195-2010 铝和铝合金.船舶用锻造和铸造产品规范(海运和近海造船).德文版本EN 13195-2009
DIN 75078-1-2010 残疾人运送用汽车.第1部分:术语、定义、要求和试验
DIN EN 14033-3-2010 铁路设施.轨道.轨道结构和维护机械.第3部分:一般安全要求.德文版本EN 14033-3-2009
DIN EN 2865-2010 航空航天系列.MoS2润滑的耐热钢、带有埋头直孔两凸耳状柄的浮动自锁锚螺母.分类:1100 MPa(室温下)/315°C.德文和英文版本EN 2865-2009
DIN EN 2869-2010 航空航天系列.钝化、耐热钢标准十字形扁钢的、开槽/蝶形的六角螺母.分类:1100 MPa(室温下)/650°C.德文和英文版本EN 2869-2009
DIN EN 4534-2-2010 航空航天系列.高负载带有自润滑衬垫的铝合金平纹衬套.第2部分:尺寸和负载.英制系列.德文和英文版本EN 4534-2-2009
DIN EN 2240-004-2010 航空航天系列.白炽灯.第004部分:灯,编码47.产品标准.德文和英文版本EN 2240-004-2010
DIN EN 2240-003-2010 航空航天系列.白炽灯.第003部分:灯,编码44.产品标准.德文和英文版本EN 2240-003-2010
DIN EN 3229-2010 航空航天系列.镀铬左螺纹钢制标准对边的、可降低高度的平纹六角螺母.分类:900 MPa(室温下)/235°C.德文和英文版本EN 3229-2009
DIN EN 2240-009-2010 航空航天系列.白炽灯.第009部分:灯,编码83.产品标准.德文和英文版本EN 2240-009-2009
DIN EN 4162-2010 航空航天系列.1100 MPa(室温下)/235°C镀镉合金钢中等长度螺纹粗糙公差标准柄的、偏置式十字槽100°埋头标准头螺钉.德文和英文版本EN 4162-2009
DIN EN 9131-2010 航空航天系列.质量管理体系.不符合项文件材料.德文和英文版本EN 9131-2009
DIN 65517-2010 航空航天.温度在315℃以下的标称抗拉强度为1100 MPa的钛合金短螺纹带内双六角和MJ螺纹的精密公差圆头螺钉
DIN 65209-2010 航空航天系统.沉头垫圈.德文和英文文本
DIN EN 1515-4-2010 法兰及其连接件.螺栓连接.第4部分:压力设备指令97/23/EC的支配设备用螺栓连接的选择.德文版本EN 1515-4-2009
DIN EN 415-5-2010 包装机械的安全性.第5部分:打包机.德文版本EN 415-5-2006+A1-2009
DIN EN 13029-2010 包装.薄金属包装.插入式塑料封闭套的孔径.德文版本EN 13029-2009
DIN EN 14879-6-2010 防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬里.第6部分:带有瓦片和砌砖工的组合衬里.德文版本EN 14879-6-2009
DIN 38402-15-2010 水、废水和淤泥的检验用德国标准方法.一般信息(A组).第15部分:流水取样(A15)
DIN 6733-2010 纸张.信封纸.要求和试验
DIN EN 848-2-2010 木工机械的安全性.带旋转工具的单面模压机械.第2部分:单心轴手动进料/一体进料镂铣机
DIN EN 1870-7-2010 木材加工机械的安全性.圆形锯床.第7部分:带综合进料台和手工装卸料的单刃锯木机; 德文版本 EN 1870-7-2002+A1-2009
DIN EN 1870-5-2010 木工机床的安全性.圆盘锯床.第5部分:圆锯架/向上切割横剖锯机
DIN EN ISO 2062-2010 纺织品.包装纱.用定速伸张测试器测定单端断裂力和断裂拉伸(ISO 2062-2009).德文版本EN ISO 2062-2009
DIN EN 13523-1-2010 卷材镀层金属.试验方法.第1部分:膜厚度.德文版本EN 13523-1-2009
DIN EN 12622-2010 机床安全性.液压折弯机.德文版本EN 12622-2009
DIN EN ISO 14343-2010 焊接消耗品.不锈钢和耐热钢氧炔焊用焊丝电极、条式电极、焊丝和焊条.分类(ISO 14343-2009).德文版本EN ISO 14343-2009
DIN EN ISO 12706-2010 无损检验.渗透试验.术语(ISO 12706-2009).三种语言版本EN ISO 12706-2009
DIN EN 14918-2010 固体生物燃料.发热量的测定.德文版本EN 14918-2009
DIN EN 14774-2-2010 固体生物燃料.水分含量的测定.烘干法.第2部分:总水分.简化方法.德文版本EN 14774-2-2009
DIN EN 1744-1-2010 岩石颗粒化学性能试验方法.第1部分:化学分析.德文版本EN 1744-1-2009
DIN EN 12697-5-2010 沥青混合物.热混合沥青试验方法.第5部分:最大密度测定.德文版本EN 12697-5-2009
DIN EN ISO 12162-2010 压力设施管材和管件用热塑性塑料.分类、命名和设计系数(ISO 12162-2009).德文版本EN ISO 12162-2009
DIN EN ISO 8799-2010 表面活性剂.聚乙氧基醇硫酸盐和烷基酚硫酸盐.非硫酸盐物质含量的测定(ISO 8799-2009).德文版本EN ISO 8799-2009
DIN EN ISO 1403-2010 一般用途的输水用织物增强橡胶软管.规范(ISO 1403-2005).德文版本EN ISO 1403-2008
DIN EN ISO 6224-2010 一般用途的输水用织物增强的热塑性软管.规范(ISO 6224-2005).德文版本EN 6224-2008
DIN EN ISO 3861-2010 喷砂清理用橡胶软管.规范(ISO 3861-2005).德文版本 EN ISO 3861-2008
DIN EN ISO 1402-2010 橡胶和塑料软管和软管组合件.液压试验方法(ISO 1402-2009)德文版本 EN ISO 1402-2009
DIN EN ISO 8031-2010 橡胶和塑料软管和软管组件.电阻率和电导率的测定(ISO 8031-2009).德文版本EN ISO 8031-2009
DIN EN ISO 2398-2010 织物增强的压缩空气用橡胶软管.规范(ISO 2398-2006).德文版本EN ISO 2398-2008
DIN EN ISO 8986-2-2010 塑料.聚丁烯-1(PB-1)模塑和挤塑材料.第2部分:试样备制和性能测定(ISO 8986-2-2009).德文版本EN ISO 8986-2-2009
DIN EN ISO 8986-1-2010 塑料.聚丁烯-1(PB-1)模塑和挤塑材料.第1部分:命名体系和基本规范(ISO 8986-1-2009).德文版本EN ISO 8986-1-2009
DIN EN ISO 4023-2010 蒸汽用橡胶软管.试验方法(ISO 4023-2009).德文版本EN ISO 4023-2009
DIN EN 13042-1-2010 空心玻璃制品的制造、处理和加工用机器和设备.安全要求.第1部分:滴料机.德文版本EN 13042-1-2007+A1-2009
DIN EN 61280-2-3-2010 纤维光学通信子系统基本试验程序.第2-3部分:数字系统.抖动和漂移的测量(IEC 61280-2-3-2009); 德文版本 EN 61280-2-3-2009
DIN EN 50065-1-2010 频率范围3kHz到148.5kHz的低压电气装置上的信号传送.第1部分:一般要求、频带和电磁干扰.德文版本 EN 50065-1-2001+A1-2010
DIN EN 61202-1-2010 光纤连接器和无源元件.光纤隔离器.第1部分:总要求(IEC 61202-1-2009).德文版本EN 61202-1-2009
DIN EN 15801-2010 文化遗产保护.试验方法.毛细作用吸水率的测定.德文版本EN 15801-2009
DIN 58290-2010 医疗器械.贝格曼式牵开器
DIN 58247-2010 医疗器械.鲁式牵开器
DIN 13456-2010 医疗器械.贝克斯式胆管扩张器
DIN 13460-2010 医疗器械.希耐瑞式持针器
DIN 58856-2010 医疗器械.代雅丹式胆结石探针
DIN 58845-2010 医疗器械.霍曼式骨格支杆
DIN 58294-2010 医疗器械.代马尔式眼睑牵开器
DIN 58249-2010 医疗器械.韦特莱纳式牵开器
DIN 13466-2010 医疗器械.韦斯特式鼻清理钳
DIN 13464-2010 医疗器械.舍波尔式牵开器
DIN 13457-2010 医疗器械.迪特耳式尿道扩张探条和扩张器
DIN 13145-2010 医疗器械.塑料锤
DIN 58849-2-2010 医疗器械.可换刀片的手术刀刀柄.刀柄
DIN 58794-2010 医疗器械.耳镊
DIN 58783-2010 医疗器械.布克式耳刮匙
DIN 58259-2010 医疗器械.马森式持针器
DIN 13461-2010 医疗器械.镶硬质合金的德巴基氏型持针器
DIN 58315-2010 医疗器械.库兴型牵开器
DIN 58288-2010 医疗器械.兰根贝克式牵开器
DIN 58287-2010 医疗器械.克尔特式伤口牵开器
DIN 13199-2010 医疗器械.韦-布二氏和瓦-威二氏筛骨修骨钳
DIN 58862-2010 医疗器械.骨刮匙
DIN 58846-2010 医疗器械.刮骨刀
DIN 58788-2010 医疗器械.哈特曼-阿累式窥鼻镜
DIN 58785-2010 医疗器械.哈特曼型窥视镜
DIN 58257-2010 医疗器械.克赖尔型持针器
DIN 58312-2010 医疗器械.肋骨收缩器
DIN 58295-2010 医疗器械.福尔克曼式伤口牵开器
DIN 58278-2010 医疗器械.睫毛镊子
DIN 58276-2010 医疗器械.艾德生型镊子
DIN 13469-2010 医疗器械.艾德生型解剖钳
DIN 13465-2010 医疗器械.艾德生型止血钳
DIN 13189-2010 医疗器械.费蓝-史密斯-克里封氏椎板切开术钻孔器
DIN 13103-2010 医疗器械.解剖割刀
DIN 6812-2010 电压可达300kV的医用X射线设备.结构辐射保护的建设规则
DIN 58867-2010 医疗器械.Breunings式隔膜手术刀
DIN 58860-2010 医疗器械.莱克塞尔式凿子
DIN 58256-2010 医疗器械.托恩尼斯式持针器
DIN 58251-2010 医疗器械.贝格曼式解剖刀
DIN 58239-2-2010 医疗器械.组织钳子.第2部分:弯曲(式)
DIN 13146-2010 医疗器械.哈耶克式锤
DIN 13119-2010 医疗器械.肠剪
DIN 58861-2010 医疗器械.兰博特式平面凿子
DIN 58317-2010 医疗器械.汉克式起子
DIN 58263-2010 医疗器械.海斯特型张口器
DIN 58250-2010 医疗器械.手术解剖刀
DIN 58236-1-2010 医疗器械.马蒂厄型持针器.第1部分:不镶硬质合金
DIN 58230-2010 医疗器械.截肢刀
DIN 58854-2010 医疗器械.桃金娘叶状探子
DIN 58847-2010 医疗器械.韦尔布吕热式骨夹持钳
DIN CLC/TS 61949-2010 超声学.原位表征.有限振幅超声波束原位曝光评估
DIN EN 15761-2010 预成形生长介质.长度、宽度、高度、体积和体密度的测定.德文版本EN 15761-2009
DIN V VDE V 0108-100-2010 紧急疏散照明系统
DIN EN 60064-2010 家用及类似一般照明用钨丝灯.性能要求(IEC 60064-1993版+修改的A2-2002版+修改的A3-2005版+修改的A4-2007版+修改的A5-2009版).德文版本 EN 60064-1995
DIN EN 60384-1-2010 电子设备用固定电容器.第1部分:总规范(IEC 60384-1-2008+ 技术勘误 2008).德文版本 EN 60384-1-2009
DIN EN 60601-2-41-2010 医疗电气设备.第2-41部分:外科照明设备和诊断照明设备的基本安全和基本性能的特定要求
DIN EN 60603-7-1-2010 电子设备用连接器.第7-1部分:8路无屏蔽固定连接器的详细规范(IEC 60603-7-1-2009).德文版本 EN 60603-7-1-2009
DIN EN 61770-2010 与总水管连接的电气器具.避免软管组件的反虹吸和失效(IEC 61770-2008).德文版本 EN 61770-2009
DIN EN 60311-2010 家用和类似用途的电熨斗.性能测量方法(IEC 60311-2002+A1-2005+A2-2009).德文版本EN 60311-2003+A1-2006+A2-2009
DIN EN 60255-151-2010 测量继电器和保护装置.第151部分:过/欠电流保护用功能要求(IEC 60255-151-2009).德文版本EN 60255-151-2009
DIN 28008-2010 管式热交换器制造的公差
DIN EN 15191-2010 预制混凝土.玻璃纤维钢筋混凝土特性的分类.德文版本EN 15191-2009
DIN EN 15269-7-2010 门、百叶窗和可开窗组合,包括建筑五金元件的耐火性和/或烟雾控制试验结果的扩展应用.第7部分:钢制推拉门的耐火性.德文版本EN 15269-7-2009
DIN EN 15857-2010 无损检测.声发射.纤维增强聚合物的试验.特殊方法学和一般评估标准.德文版本EN 15857-2010
DIN EN 15182-4-2010 消防设备用手持式分支管.第4部分:PN40型高压分支管.德文版本EN 15182-4-2007+A1-2009
DIN EN 474-7-2010 土方机械.安全性.第7部分:铲土机的要求.德文版本EN 474-7-2006+A1-2009
DIN EN 1847-2010 防水软板.屋顶防水用塑料和橡胶薄板.液态化学品包括水的暴露方法
DIN EN 474-9-2010 土方机械.安全性.第9部分:铺管机的要求.德文版本EN 474-9-2006+A1-2009
DIN EN 474-10-2010 土方机械.安全性.第10部分:挖沟机的要求
DIN 18650-1-2010 电动人行门.第1部分:产品要求和试验方法
DIN 18551-2010 喷射混凝土.DIN EN 14487系列全国性规则和喷射混凝土设计规则
DIN 1212-3-2010 错列人孔梯用直立式阶梯脚扣.第3部分:螺栓连接的阶梯脚扣
DIN EN 15689-2010 铁路设施.轨道.开关和交叉口.铸件奥氏体锰钢支撑的交叉口组件
DIN EN ISO 7590-2010 钢丝输送带.总厚度和涂层厚度的测量方法
DIN 18182-2-2010 石膏板上使用的附件.第2部分:板墙螺钉、U形钉和钉子
DIN EN 15841-2010 环境空气质量.排入大气中的砷、镉、镍的测定标准方法.德文版本EN 15841-2009
DIN EN 15845-2010 纸和纸板.水提出物细胞毒性的测定.德文版本 EN 15845-2010
DIN EN 15649-1-2010 水上和水中用漂浮娱乐项目.第1部分:分类、材料、一般要求和试验方法.德文版本EN 15649-1-2009
DIN EN 15649-2-2010 水上和水中用漂浮娱乐项目.第2部分:消费者信息.德文版本EN 15649-2-2009
DIN EN 1058-2010 木基板材.特征5-百分位数值和特征均值的测定
DIN EN 15649-6-2010 水上和水中用浮动娱乐项目.第6部分:D级装置用附加特殊安全要求和试验方法
DIN 6735-2010 纸、纸板和纸浆.术语和定义概况;德语、英语和法语正文
DIN EN 15856-2010 无损检测.声发射.周围充满液体的金属内壁腐蚀检测用AE试验方法的一般原理.德文版本EN 15856-2010
DIN EN 15103-2010 固体生物燃料.体积密度的测定.德文版本EN 15103-2009
DIN 51423-1-2010 矿物油的检验.第1部分:用精密折射计测量折射率
DIN 51350-3-2010 润滑剂检验.用四球检测仪检验.第3部分:液体润滑剂耐磨损特性的测定
DIN 51350-2-2010 润滑剂检测.用四球检测仪检验.第2部分:液体润滑剂焊接承载力的测定
DIN 51515-1-2010 汽轮机用润滑剂和调速液.最低要求.第1部分:一般应用的涡轮机油TD
DIN 51515-2-2010 汽轮机用润滑剂和调速液.最低要求.第2部分:高温服务用汽轮机油甘油三酯(TG)
DIN EN 15837-2010 乙醇为汽油的一种调和组分.磷、铜和硫含量的测定.用电感耦合等离子体法(ICP OES)的直接法.德文版本EN 15837-2009
DIN EN 15799-2010 游泳池水处理用化学品.粉状活性炭.德文版本EN 15799-2010
DIN EN 61000-4-14-2010 电磁兼容性(EMC).第4-14部分:试验和测量技术.单项输入电流不超过16A的设备的电压波动抗扰度试验(IEC 61000-4-14-1999+A1-2001+A2-2009).EN 6100
DIN EN 60793-2-20-2010 光纤.第2-20部分:产品规范.A2类多模光纤分规范
DIN EN 60268-5-2010 音响系统设备.第5部分:扬声器(IEC 60268-5-2003+A1-2007).德文版本EN 60268-5-2003+A1-2009
DIN EN 61000-4-13-2010 电磁兼容性.第4-13部分:试验和测量技术.包括交流电功率端主信令谐波和中间谐波的低频抗扰试验的试验和测量技术(IEC 61000-4-13-2002+A1-2009).德文版本EN 61000
DIN EN 60749-20-2010 半导体器件.机械和气候试验方法.第20部分:塑料封装的表面安装器件抗湿气和焊接热的综合影响(IEC 60749-20-2008).德文版本EN 60749-20-2009
DIN EN 55012-2010 车辆、船舶和内燃机驱动装置.无线电干扰特性.接收器保护用测量极限和方法(IEC/CISPR 12-2007 + A1-2009).德文版本EN 55012-2007 + A1-2009
DIN 32706-2010 资料和文件.用罗马字体书写的亚美尼亚语字母
DIN 32707-2010 信息和文档.用罗马字体书写的格鲁吉亚语字母
DIN CLC/TS 50131-2-7-1-2010 报警系统.侵入和拦截系统.第2-7-1部分:入侵检测器.玻璃破碎探测器(声学).德文版本CLC/TS 50131-2-7-1-2009
DIN CLC/TS 50131-2-7-2-2010 报警系统.侵入和拦截系统.第2-7-2部分:入侵检测器.玻璃破碎探测器(无源).德文版本CLC/TS 50131-2-7-2-2009
DIN CLC/TS 50131-2-7-3-2010 报警系统.侵入和拦截系统.第2-7-3部分:入侵检测器.玻璃破碎探测器(有源).德文版本CLC/TS 50131-2-7-3-2009
DIN CLC/TS 50398-2010 报警系统.组合和集成报警系统.一般要求.德文版本CLC/TS 50398-2009
DIN EN 15838-2010 客户联系中心.服务提供要求.德文版本EN 15838-2009
DIN EN 60601-2-21-2010 医疗电气设备.第2-21部分:婴儿辐射保温箱基本安全及基本性能的详细要求(IEC 60601-2-21-2009).德文版本EN 60601-2-21-2009
DIN EN 60601-2-2-2010 医疗电气设备.第2-2部分:高频手术器械和高频手术器械配件的基本安全及基本性能的详细要求(IEC 60601-2-2-2009).德文版本EN 60601-2-2-2009
DIN EN 4618-2010 航空航天系列.飞机内部空气质量标准,条件及测定方法.德文及英文版本EN 4618-2009
DIN EN 13544-2-2010 呼吸治疗设备.第2部分:管和连接件.德文版本EN 13544-2-2002+A1-2009
DIN EN 60601-2-19-2010 医疗电气设备.第2-19部分:婴儿保育箱的基本安全及基本性能用详细要求(IEC 60601-2-19-2009).德文版本EN 60601-2-19-2009
DIN 58948-7-2010 消毒.低温消毒器.第7部分:环氧乙烷消毒器及其电源的安装和操作要求
DIN SPEC 1130-2010 土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第3部分:上流过滤试验(ISO/TS 21268-3-2007).德文版本CEN ISO/TS 21268-3-2009
DIN SPEC 1129-2010 土质.土壤和土壤材料的连续化学和毒物学测试的浸出过程.第2部分:液固比为101/kg干物质的批量试验(ISO/TS 21268-2-2007).德文版本CEN ISO/TS 21268-2-2009
DIN SPEC 1128-2010 土质.连续化学和毒物学测试的土壤和土壤材料的浸出过程.第1部分:液固比为21/kg的干物质的批量试验 (ISO/TS 21268-1-2007).德文版本 CEN ISO/TS 21268-1-2009
DIN EN 15750-2010 肥料.用两种不同的方法对含氮磷钾的肥料,如氮,氨和尿素氨,总氮含量的测定.德文版本EN 15750-2009
DIN EN 12921-4-2010 利用液体或蒸汽的工业产品的表面清洁和预处理机器.第4部分:使用卤化溶剂的机械安全性.德文版本EN 12921-4-2005+A1-2008
DIN EN 60947-5-1-2010 低压开关设备和控制设备.第5-1部分:控制电路设备和开关元件.(IEC 60947-5-1-2003 + A1-2009).德文版本EN 60947-5-1-2004 + Cor.2005 + A
DIN VDE 0100-729-2010 低压电气装置.第7-729部分:特殊装置或场所的要求.操作和维护过道(IEC 60364-7-729-2007, 修改采用).德文实施HD 60364-7-729-2009
DIN VDE 0100-708-2010 低压设施.第7-708部分:特殊设施或场所的要求.旅游车停车场、野营停车场和类似场所 (IEC 60364-7-708-2007,修改采用).德文版本 HD 60364-7-708-2009
DIN VDE 0100-709-2010 低压电气设施.第7-709部分:特殊设施或场所的要求.小艇码头和类似场所(IEC 60364-7-709-2007,修改采用);German implementation HD 60364-7-7
DIN VDE 0620-1-2010 家用和类似用途插头和插座连接.第1部分:一般要求
DIN EN 60335-2-68-2010 家用及类似用途电器.安全性.第2-68部分:商用喷雾干燥设备详细要求(修改的IEC 60335-2-68-2002+A1-2005+A2-2007)德文版本EN 60335-2-68-2009
DIN EN 60335-2-69-2010 家用及类似用途电器.安全性.第2-69部分:商业用带有电动刷的湿式及干式真空吸尘器的详细要求.(修改的IEC 60335-2-69-2002+A1-2004+A2-2007).德文版本EN 60
DIN EN 60335-2-72-2010 家用及类似电器.安全性.第2-72部分:商业用地板自动处理机械详细要求(修改的IEC 60335-2-72-2002+A1-2005)德文版本EN 60335-2-72-2009
DIN EN 60745-1-2010 手持式电动工具.安全.第1部分:一般要求(IEC 60745-1-2006,修改).德文版本EN 60745-1-2009
DIN 5050-1-2010 日光浴室及家用日光灯.第1部分:测量与标记
DIN EN 60745-2-21-2010 手持式电动工具.安全性.第2-21部分:排水沟清理机的特殊要求(IEC 60745-2-21-2002,修改).德文版本EN 60745-2-21-2009
DIN EN 60947-2-2010 低压开关和控制设备.第2部分:断路器(IEC 60947-2-2006 + A1-2009).德文版本EN 60947-2-2006+A1-2009
DIN EN 60255-26-2010 测量继电器和保护装置.第26部分:电磁兼容性要求(IEC 60255-26-2008).德文版本EN 60255-26-2009
DIN EN 61660-1 Berichtigung 1-2010 短路电流.发电厂和变电站中直流辅助设备的短路电流.第1部分:短路电流的计算(IEC 61660-1-1997).德文版本EN 61660-1-1997,勘误表DIN EN
DIN EN 61968-9-2010 电气设施应用集成.配送管理用系统接口.第9部分:仪表读数和控制用接口(IEC 61968-9-2009).英文版本EN 61968-9-2009
DIN EN 50524-2010 太阳能转换器用数据表和商标.德文版本EN 50524-2009
DIN VDE 0493-110-2010 辐射防护仪器.第110部分:安装人员表面污染监测集会的定期测试
DIN 18650-2-2010 电动人行门.第2部分:电动人行门的安全性
DIN SPEC 1030-2010 冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第7部分:合格评定指南(ISO/TS 15877-7-2009).德文版本CEN ISO/TS 15877-7-2009
DIN SPEC 1101-2010 住宅固体燃料燃烧设备.排放试验方法.德文版本CEN/TS 15883-2009
DIN EN ISO 7096-2010 土方机械.驾驶员座椅振动的实验室评定(ISO 7096-2000).德文版本EN ISO 7096-2008+AC-2009
DIN SPEC 1139-2010 根据燃烧产物(类型)排放的方法来对气体用具分类的欧洲方案.德文版本CEN/TR 1749-2009
DIN EN 480-13-2010 混凝土、砂浆和水泥浆添加剂.试验方法.第13部分:检验砂浆附加剂的基准砂浆.德文版本EN 480-13-2009
DIN EN 480-10-2010 混凝土、砂浆和水泥浆添加剂.试验方法.第10部分:水溶性氯化物含量的测定.德文版本EN 480-10-2009
DIN EN 81-21-2010 电梯的建筑安装工程用安全规程.载人及载货电梯.第21部分:现有建筑物中新建客梯及客货两用电梯.德文版本EN 81-21-2009
DIN 14662-2010 消防.火灾探测和火灾报警系统用消防队指示板
DIN V 18599 Bb.1-2010 建筑节能效率.供暖,供冷,通风设备,生活热水及照明设备用网络,终端和一次能源需求量计算.增补件1:需求与消费间的平衡
DIN EN 934-3-2010 混凝土、砂浆和水泥浆添加剂.第3部分:砌筑砂浆添加剂.定义、要求、一致性、标记和标签.德文版本EN 934-3-2009
DIN 20361-2010 凿岩.钻夹套.连接尺寸、材料和设计
DIN 20367-2010 凿岩机.旋转钻井设备用旋转螺丝连接件.设计尺寸
DIN 81401-2010 连接铰链及铰链.螺钉安装的船舶舱门
DIN 86044-1-2010 船舶排气管道.法兰盘.第1部分:重型设计
DIN 81220-2010 船舶及海上技术.消防,救生装置及逃生方法用信号以及指示牌
DIN 86025-3-2010 船舶用管夹.带托架的固定夹件.第3部分:插件
DIN 86025-1-2010 船舶用管夹.带托架的固定夹件.第1部分:不带插件A型和带插件B型
DIN VDE 0100-721-2010 低压电气装置.第7-721部分:特殊装置或位置的要求.居住挂车和电动居住挂车的电气装置(IEC 60364-7-721-2007, 修改采用).德文版本 HD 60364-7-721-2009
DIN EN 15436-4-2010 公路服务区的维修设备.第4部分:经由用户的机器配送承兑.德文版本EN 15436-4-2009
DIN EN 15085-3-2010 铁路设施.铁路车辆和组件的焊接.第3部分:设计要求.德文版本DIN EN 15085-3-2007
DIN EN 4024-2010 航空航天系列.钛合金管连接件8°30'.带止推金属丝螺母的焊接端45°弯头.德文和英文版本 EN 4024-2001
DIN EN 3733-001-2010 航空航天系列.连续工作温度为150℃自锁紧环连接的单路圆形光学连接器.第001部分:技术规范.德文与英文版本EN 3733-001-2009
DIN EN 4626-202-2010 航空航天系列.2.5mm直径套圈、方框空腔谐振器、机架和面板多触点矩形光学连接器.工作温度为-65℃~125℃(依赖电缆).冲水触点.第202部分:900 m缓冲纤维插座用光触点组件.产品标准.德
DIN EN 6049-003-2010 航空航天系列.电缆装置.间位芳香族聚酰胺纤维保护套管.第003部分:编制管状形可膨胀的产品标准.德文及英文版本EN 6049-003-2009
DIN EN 2812-2010 航空航天系列.电缆剥离工具.德文及英文版本EN 2812-2009
DIN EN 4644-003-2010 航空航天系列.在175 °C温度下连续操作的、带有矩形衬垫矩形模块化光电连接器.第003部分:矩形衬垫.产品标准.德文及英文版本EN 4644-003-2009
DIN EN 3475-417-2010 航空航天系列.航空器用电缆.试验方法.第417部分:安全带内电缆的耐火性
DIN 65270-2010 航空航天.等级为1100MPa/120℃、带MJ螺纹的、六角形、开槽/齿形耐腐蚀钢制自锁螺母
DIN EN 2862-2010 航空航天系列.MoS2润滑镀镉的合金钢、具有扩孔固定的90°内角自锁锚点螺母.分类1100 MPa(室温下)/235°C.德文和英文版本EN 2862-2009
DIN EN 2240-006-2010 航空航天系列.白炽灯.第006部分:灯,编码73E.产品标准.德文和英文版本EN 2240-006-2009
DIN EN 2240-002-2010 航空航天系列.白炽灯.第002部分:主要特征.德文和英文版本EN 2240-002-2009
DIN EN 2866-2010 航空航天系列.MoS2润滑镀镉的钢制带有扩孔的单柄非固定的自锁锚点螺母.分类:1100MPa(室温下)/235°C.德文和英文版本EN 2866-2009
DIN EN 4614-2010 航空航天系列.宽体系列自润滑衬垫耐腐蚀刚关节轴承.尺寸和负载.英制系列.德文和英文版本EN 4614-2009
DIN EN 4178-2010 航空航天系列.MoS2润滑的阳极氧化处理的、钛合金中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.1100 MPa(室温下)/315°C.德文和英文版本EN 4178-2009
DIN EN 4078-2010 航空航天系列.MoS2润滑的耐热钢锁定和自锁的薄壁螺纹衬垫.分类:1100MPa(室温下)/315°C.德文和英文版本EN 4078-2009
DIN EN 2867-2010 航空航天系列.MoS2润滑的耐热钢、带有埋头直孔的一个柄非固定式自锁锚点螺母.分类:1100 MPa(室温)/315°C.德文和英文版本EN 2867-2009
DIN EN 3987-2010 航空航天系列.金属材料试验方法.恒幅度可控力高循环疲劳试验.德文及英文版本EN 3987-2009
DIN EN 4636-2010 航空航天系列.有色铝涂层TI-P64001型钛合金短螺纹100°沉头偏置六角形凹槽螺钉.等级:1100MPa(室温)/315℃
DIN EN 2240-010-2010 航空航天系列.白炽灯.第010部分:灯、编码84.产品标准
DIN EN 4613-2010 航空航天系列.窄系列自润滑衬板耐腐蚀钢球面滑动轴承.尺寸和载荷.英寸系列
DIN EN 4535-2-2010 航空航天系列.高负荷自润滑衬板铝合金法兰连接的衬套.第2部分:尺寸和载荷.英寸系列
DIN EN 13157-2010 起重机.安全性.手动起重机.德文版本EN 13157-2004+A1-2009
DIN ISO 13012-1-2010 滚动轴承.套筒型线性滚珠轴承附件.第1部分:系列1和3用边界尺寸及公差(ISO 13012-1-2009)
DIN ISO 13012-2-2010 滚动轴承.套筒型线性滚珠轴承用附件.第2部分:系列5用边界尺寸及公差(ISO 13012-2-2009)
DIN EN 1349-2010 工业过程控制阀.德文版本EN 1349-2009
DIN EN 12881-1-2010 输送带.着火模拟可燃性试验.第1部分:丙烷燃烧试验.德文版本EN 12881-1-2005+A1-2008
DIN EN 15714-4-2010 工业阀门.制动器.第4部分:工业阀门用液压件转动制动器.基本要求.德文版本EN 15714-4-2009
DIN 3970-2010 圆柱齿轮检查用标准齿轮.齿轮毛坯和齿轮传动
DIN 631-2010 滚动轴承.机架和剖面铁轨组成再循环线性移动滚珠或滚柱轴承动态载荷额定值的实验检查用试验条件
DIN SPEC 1060-2010 知识产权管理中的服务质量
DIN EN ISO 9100-4-2010 玻璃容器.真空凸缘瓶口.第4部分:中型38(ISO 9100-4-2005+Cor.1-2009).德文版本 EN ISO 9100-4-2005+AC-2009
DIN EN 50177-2010 易燃涂层粉末用固定式静电喷涂设备.安全要求.德文版本EN 50177-2009
DIN 55543-1-2010 包装试验.包装膜试验方法.第1部分:膜厚度的测定
DIN 55634-2010 涂料、清漆和涂层.薄壁钢制建筑部件的支持腐蚀保护
DIN SPEC 1138-2010 食品.根据杜马原则通过燃烧对总氮含量的测定和粗蛋白含量的计算.第2部分:谷物、豆类和碾磨谷物产品(CEN ISO/TS 16634-2-2009).德文版本CEN ISO/TS 16634-2009
DIN SPEC 1133-2010 办公器具.办公室的工作椅.第四部分:符合 EN 1335-1-2000的说明(尺寸).德文版本CEN/TR 1335-4-2009
DIN EN 1335-2-2010 办公家具.办公椅.第2部分:安全要求.德文版本EN 1335-2-2009
DIN 81402-2010 连接铰链及铰链.用螺丝安装接合的家具门
DIN 81407-2010 衣帽钩,窗帘钩及毛巾钩
DIN EN ISO 13366-1 Berichtigung 1-2010 牛奶.体细胞菌落计数.第1部分:显微法(比照法)(ISO 13366-1-2008).德文版本EN ISO 13366-1-2008,勘误表DIN EN ISO
DIN EN 860-2010 木材加工机械的安全性.单面龙门刨床.德文版本EN 860-2007+A1-2009
DIN EN 15166-2010 食品加工机械.畜体屠宰场的自动背部剥离机器.安全及卫生要求.德文版本 EN 15166-2008
DIN 6935 Bb.1-2010 扁平钢轧材的冷弯.增补件1:弯曲之前计算扁材长度的补偿值V系数
DIN 4000-81-2010 产品特性表设计.第81部分:非转位切边刀片用钻和锪锥孔工具
DIN 6935-2010 扁平钢轧材的冷弯
DIN 17860-2010 钛和钛合金钢带、薄板材和带材.交付技术条件
DIN 9830-2010 冲压件的毛刺高度
DIN 6930-2-2010 冲制钢件.第2部分:通用公差
DIN 6932-2010 冲压件的设计规则
DIN 1900-2010 金属材料用铜焊程序的规范和资格.钢的电弧钎焊用程序试验
DIN VDE 0118-1-2010 矿井电气设备的安装.第1部分:一般要求
DIN VDE 0118-2-2010 矿井电气设备安装.第2部分:补充规定
DIN EN 14774-3-2010 固体生物燃料.水分含量的测定.烘干法.第3部分:全面分析样品中的水分.德文版本EN 14774-3-2009
DIN EN ISO 15136-1-2010 石油和天然气工业用下降孔设备.人工升降机用推进腔体泵系统. 第1部分:泵(ISO 15136-1-2009).英文版本EN ISO 15136-1-2009
DIN ISO 3448-2010 工业液体润滑剂.ISO粘度分级(ISO 3448-1992)
DIN 51471-2010 液体石油产品.燃料油预期损失(EL)的储存稳定性的测定
DIN 51399-2-2010 润滑剂试验.添加剂中元素的含量、磨损和其他污染物的测定.第2部分:波长色散X射线荧光光谱法(XRF)
DIN 51773-2010 液体燃料检验.用BASF电机测定柴油燃点质量(十六烷值)
DIN EN ISO 8330-2010 橡胶和塑料软管及软管组件.词汇(ISO 8330-2007).德文版本EN ISO 8330-2008
DIN 50451-5-2010 半导体工艺用材料测试.液体中痕量元素测定.第5部分:在每千克微克和每千克豪微克范围之内的痕量元素测定用样品和样品制备装置的材料选择及其适用性试验指南
DIN 1460-2-2010 罗马字体书写西里尔字母.第2部分:用罗马字体书写非斯拉夫语言的西里尔字母
DIN EN 50131-4-2010 报警系统.侵入和拦截系统.第4部分:报警装置.德文版本EN 50131-4-2009
DIN EN 50131-3-2010 报警系统.侵入和拦截系统.第3部分:控制和显示设备.德文版本EN 50131-3-2009
DIN 58987-2010 止血学.血管性血友病因子抗原用参考方法.德文和英文文本
DIN 58988-2010 止血学.血管性血友病因子用参考方法.德文和英文文本
DIN 6868-151-2010 X光诊断部门中照片的质量保证.第151部分:与R V一致的牙科放射设备的验收测试.安装、维修和修改后的图像质量的检查用规则
DIN EN ISO 16061-2010 与非活性外科植入物联合使用的仪表装置.一般要求(ISO 16061-2008, 修正版本2009-03-15).德文版本EN ISO 16061-2009
DIN 49073 Berichtigung 1-2010 16A、250V以下装修辅助仪器用凹入式安装和插座引出线符合DIN 49445、DIN 49447 和DIN EN 60309-2 (VDE 0623-20)32 A 690 V以
DIN EN 60669-1 Berichtigung 1-2010 家用及类似电气安装用开关.第1部分:通用要求(IEC 60669-1-1998+A1-1999+A2-2006).德文版本EN 60669-1-1999 + A1-200
DIN EN 61111-2010 带电作业.电绝缘垫(IEC 61111-2009).德文版本EN 61111-2009
DIN 56930-3-2010 娱乐科技.照明控制系统.第3部分:照明控制系统的以太网用术语和要求
DIN EN 60745-2-4-2010 手持式电动工具.安全性.第2-4部分:盘式除外的砂轮机和抛光机的特殊要求(IEC 60745-2-4-2002+A1-2008).德文版本EN 60745-2-4-2003+A11-2007+A1
DIN EN 50428-2010 家用及类似电气安装用开关.并列标准.家用和建筑电子系统(HBES)用开关和相关附件.德文版本EN 50428-2005+A1-2007+A2-2009
DIN EN 61029-1-2010 便携式电动工具的安全性.第1部分:一般要求(修改的IEC 61029-1-1990).德文版本EN 61029-1-2009
DIN EN 61008-1-2010 家用及类似用途的综合过电流保护的剩余电流断路器.第1部分:总则(修改的IEC 61008-1-1996+A1-2002).德文版本EN 61008-1-2004+A11:2007+A12:2009
DIN EN 61009-1-2010 家用及类似用途的综合过电流保护的剩余电流断路器.第1部分:总则(修改的IEC 61009-1-1996+勘误表:2003+A1:2002).德文版本EN 61009-1-2004+勘误表:2006+A
DIN EN 15597-1-2010 冬天维修设备.涂胶机(铺砂机).第1部分:涂胶机的一般要求和定义.德文版本N 15597-1-2009
DIN 65058-2010 航空航天.标称抗拉强度900MPa和1100 MPa、温度425℃以下耐蚀钢制螺栓和螺钉.技术规范.德文和英文版本
DIN EN 280-2010 移动升降工作平台.设计计算.稳定性标准.构造.安全性.检查和试验.德文版本EN 280-2001+A2-2009
DIN EN ISO 22721-2010 传送带.地下开采用橡胶涂层或塑胶覆层织物结构的传送带规范(ISO 22721-2007).德文版本EN ISO 22721-2007
DIN 45631/A1-2010 声谱中响度级和响度的计算.兹维克方法.修改件1:时变声音的响度计算.带有光盘
DIN EN 861-2010 木材加工机械的安全性.平压两用木工刨床.德文版本EN 861-2007+A1-2009
DIN 60006-2010 喷水器固化用带材
DIN 21181-2-2010 凿井.碎石吊桶.第2部分:带有两条悬挂链的碎石吊桶
DIN 21181-1-2010 凿井.碎石吊桶.第1部分:带有悬挂吊架的碎石吊桶
DIN SPEC 1121-2010 纳米技术.纳米对象用术语和定义.纳米颗粒、纳米纤维和纳米板
DIN EN 13035-3-2010 平板玻璃的制造、处理和加工用机械和设备.安全性要求.第3部分:切割机械.德文版本EN 13035-3-2003+A1-2009
DIN EN 62453-303-2-2010 现场设备工具(FDT)接口规范.第303-2部分:集成通讯规程.IEC 61784 CP 3/4,CP 3/5和CP 3/6(IEC 62453-303-2-2009).英文版本EN 6245
DIN EN 62453-2-2010 现场设备工具(FDT)接口规范.第2部分:概念和详细说明(IEC 62453-2-2009).英文版本EN 62453-2-2009
DIN EN 62453-306-2010 现场设备工具(FDT)接口规范.第306部分:通讯行规综合.IEC 61784 CPF 6 (IEC 62453-306-2009).英文版本EN 62453-306-2009
DIN EN 62453-301-2010 现场设备工具(FDT)接口规范.第301部分:通讯行规综合.IEC 61784 CPF 1 (IEC 62453-301-2009).英文版本EN 62453-301-2009
DIN EN 60728-1-2-2010 电视信号、声音信号和交互式设备用电缆网络.第1-2部分:运行系统出口的信号传送性能要求(IEC 60728-1-2-2009).德文版本EN 60728-1-2-2009
DIN EN 301839-1-2010 电磁兼容性和无线频谱管理(ERM).短距离装置(SRD).工作频率范围为402MHz~405MHz的超低功率有源医疗植入物(ULP-AMI)和超低功率有源医疗植入物外围设备(ULP-AMI-P).第
DIN EN 61966-5-2010 多媒体系统和设备.颜色测定和管理.第5部分:使用等离子显示屏的设备(IEC 61966-5-2008).德文版本EN 61966-5-2009
DIN EN 301839-2-2010 电磁兼容性和无线频谱管理(ERM).短距离装置(SRD).工作频率范围为402MHz~405MHz的超低功率有源医疗植入物(ULP-AMI)和超低功率有源医疗植入物外围设备(ULP-AMI-P).第
DIN EN 62516-1-2010 多媒体广播(T-DMB)接收器.第1部分:基本要求(IEC 62516-1-2009).德文版本EN 62516-1-2009
DIN EN 60794-3-10-2010 光缆.第3-10部分:户外电缆.管道光缆和直埋通信光缆的系列规范(IEC 60794-3-10-2009).德文版本EN 60794-3-10-2009+勘误表2009
DIN EN 60793-2-30-2010 光纤.第2-30部分:产品规范.A3类多模光纤分规范(IEC 60793-2-30-2007).德文版本EN 60793-2-30-2009
DIN EN 62137-1-5-2010 表面贴装技术.表面贴装焊接接点用环境及疲劳试验方法.第1-5部分:机械剪切疲劳试验(IEC 62137-1-5-2009).德文版本EN 62137-1-5-2009
DIN EN 62295-2010 多媒体系统.异质网络连通性的公用通讯协议
DIN EN 60286-3-1-2010 自动装卸部件的封装.第3-1部分:用连续胶带对表面安装部件进行封装.类型V.压力输送带(IEC 60286-3-1-2009).德文版本EN 60286-3-1-2009
DIN 13109-2010 医疗器械.无合金刀片的结扎线剪
DIN 13134-2010 医疗器械.西姆斯直行子宫剪.无合金刀片
DIN 58289-2010 医疗器械.Mikulicz式弯片形腹部和肝脏牵开器
DIN 13995-2010 牙科学.计算机辅助设计/计算机辅助制造(CAD/CAM)系统用工艺链术语
DIN 58266-1-2010 医疗器械.Crile-Wood式针托.第1部分:无合金刀片
DIN 58863-2010 医疗器械.福克曼式刮骨器
DIN 58795-2010 医疗器械.开口器.滑杆及压舌板的尺寸
DIN 58266-2-2010 医疗器械.克利尔-乌德式针托.第2部分:带有合金刀片
DIN 58866-2010 医疗器械.巴氏鼻中隔刀
DIN 58864-2010 医疗器械.西蒙,施罗德及哈雷式刮骨器
DIN 58796-2010 医疗器械.带手柄的喉镜
DIN 58267-2010 医疗器械.马修式带有内卡爪的持针器
DIN 58236-2-2010 医疗器械.马修式持针器.第2部分:带有镶硬合金齿
DIN 58291-2010 医疗器械.西蒙和马丁式牵开器
DIN 13188-2010 医疗器械.亨宁式石膏摊开器
DIN 13148-2010 医疗器械.带互换塑料盘的锤
DIN 13104-2010 医疗器械.软骨刀
DIN 58859-2010 医疗器械.Tonnis式双端解剖器
DIN 58851-2010 医疗器械.格雷菲式白内障刀
DIN 58292-2010 医疗器械.气管钩
DIN 58264-2010 医疗器械.菲诺切托式肋骨牵开器
DIN 58240-2010 医疗器械.以色列式牵开器
DIN 58238-2-2010 医疗器械.解剖钳.第2部分:弯式
DIN 13467-2010 医疗器械.马吉尔式麻醉导管导引钳
DIN 13198-2010 医疗器械.高桥式筛状咬骨钳
DIN EN 60393-1-2010 电子设备用电位器.第1部分:通用规范(IEC 60393-1-2008).德文版本EN 60393-1-2009
DIN EN 62026-3-2010 低压开关设备和控制设备.控制器设备接口(CDIs).第3部分:设备网(IEC 62026-3-2008).德文版本EN 62026-3-2009
DIN EN 60426 Berichtigung 1-2010 电绝缘材料.绝缘材料引起的电解腐蚀的测定.试验方法(IEC 60426-2007).德文版本EN 60426-2007, DIN EN 60426 (VDE 0303-6)-
DIN EN 61914-2010 电气设备用电缆夹具(IEC 61914-2009).德文版本EN 61914-2009
DIN EN 60264-1-2010 绕组线的封装.第1部分:漆包圆绕组线(IEC 60264-1-1968+A1-2009).德文版本EN 60264-1-1994+A1-2009
DIN EN 60034-15-2010 旋转电机.第15部分:成型定子线圈旋转交流电机的脉冲电压耐压水平(IEC 60034-15-2009).德文版本EN 60034-15-2009
DIN EN 61076-3-114-2010 电子设备用连接器.产品要求.第3-114部分:矩形插头座.与IEC 60603-7系列接口结合的、与IEC 61076-3-10614变量相关联的工业环境用8路屏蔽和非屏蔽卡口式连接器保护罩的
DIN EN 140101-806 Berichtigung 1-2010 详细规范:低功率薄膜固定电阻器.高级陶瓷上保护涂覆或模塑、轴向或预制导线的金属薄膜电阻器.德文版本EN 140101-806-2008,勘误表DIN EN 1401
DIN EN 61076-3-117-2010 电子设备用连接器.产品要求.第3-117部分:矩形插头座.与IEC 60603-7系列接口结合的、与IEC 61076-3-10614变量相关的工业环境用8路屏蔽和非屏蔽推挽式轴接连接器保护罩
DIN EN 61466-1 Berichtigung 1-2010 额定电压超过1KV的架空线用复合绝缘子串元件.第1部分:标准强度等级和终端配件(IEC 61466-1:1997).德文版本EN 61466-1-1997.标准DIN E
DIN EN 62271-109-2010 高压开关设备和控制设备.第109部分:交流电串联电容器旁路开关(IEC 62271-109-2008).德文版本EN 62271-109-2009
DIN EN 60966-3-2010 射频同轴电缆组件.第3部分:半柔性同轴电缆组件分规范(IEC 60966-3-2008).德文版本EN 60966-3-2009
DIN EN 61400-3-2010 风力涡轮机.第3部分:离岸风力涡轮机的设计要求(IEC 61400-3-2009).德文版本EN 61400-3-2009
DIN 4109 Bb.1/A2-2010 建筑物隔音.增补件1:结构实例和计算方法.修改件A2
DIN EN 378-4 Berichtigung 1-2010 制冷系统和热泵.安全和环境要求.第4部分:操作,维修,检修和回收.德文版本EN 378-4-2008,勘误表DIN EN 378-4-2008
DIN EN 378-3 Berichtigung 1-2010 制冷系统和热泵.安全和环境要求.第3部分:安装位置和个人防护.德文版本EN 378-3-2008,勘误表DIN EN 378-3-2008
DIN EN 60945 Berichtigung 1-2010 海上航行无线电通讯设备及系统.一般要求.试验方法及要求的试验结果(IEC 60945-2002).德文版本EN 60945-2002.勘误表DIN EN 60945-2003
DIN EN 3464-2010 航空航天系列.6mm
DIN EN 3456-2010 航空航天系列.a≤6mm热轧的煅烧的钛合金TI-P64001(Ti-6Al-4V)薄板和带材.德文和英文版本3456-2009
DIN 6650-9-2010 饮料分配设备.第9部分:水冷却器
DIN 15708-1-2010 电子静止图像.数字RGB图像数据的质量检验.第1部分:印刷装置的输出
DIN EN ISO 17677-1-2010 电阻焊接.词汇.第1部分:点焊、凸焊及缝焊(ISO 17677-1-2009).三种语言版本EN ISO 17677-1-2009
DIN 51639-4-2010 润滑剂试验.试验方法.第4部分:用红外光谱法测定柴油发动机油中植物油分数
DIN 51423-2-2010 矿物油试验.第2部分:使用阿勃(Abbe)折射计对相对折射率的测量
DIN 51358-2010 润滑油试验.内燃机用防腐油的防腐性能试验.海水浸泡试验
DIN EN 62424-2010 过程控制工程的表示法.P&ID工具和PCE-CAE工具之间P&I图表及数据交换的请求(IEC 62424-2008).德文版本EN 62424-2009
DIN 58850-2010 医疗器械.眼科解剖刀
DIN 58297-2010 医疗器械.杜瓦杨式骨膜剥离器
DIN 58265-2010 医疗器械.菲诺切托式持针器
DIN 58262-2010 医疗器械.詹宁斯式张口器
DIN 13135-2010 医疗器械.基尔希纳式腹壁牵开器
DIN 13137-2010 医疗器械.弗里契式腹壁牵开器
DIN 13105-2010 医疗器械.尸体解剖刀
DIN 13453-2010 医疗器械.扁桃体剪
DIN 58286-2010 医疗器械.科歇式牵开器
DIN 58248-2010 医疗器械.詹森式牵开器
DIN 13147-2010 医疗器械.伯格曼式锤
DIN 5683-2-2010 圆钢扁接链.浮标锚链.第2部分:等级4配件
DIN 21916-2-2010 矿区平面图.操作安全性.第2部分:地面防火
DIN 51350-1-2010 润滑剂检测.四球式硬度试验仪检测法.第1部分:一般工作原理
DIN EN 300175-7-2011 数字增强型无绳通信(DECT).通用接口(CI).第7部分:安全特征(英文版本EN 300175-7 V2.3.1 (2010-06) 作为德国标准)
DIN EN 300392-12-8-2011 地面主干线广播.语音加数据.第12部分:补充服务阶段3.第12-8子部分:区域选择(AS)(英文版本EN 300392-12-8 V1.2.1 (2010-07)的核准本作为德国标准)
DIN CLC/TR 62541-1-2011 OPC统一架构.第1部分:总论和概念(IEC/TR 62541-1-2010).德文版本CLC/TR 62541-1-2010
DIN CEN ISO/TS 13141-2011 电子收费系统.自主系统用本地化增强通信(ISO/TS 13141-2010).英文版本CEN ISO/TS 13141-2010
DIN CEN ISO/TS 12813-2011 电子收费.自治系统的遵循规定巡查通信(ISO/TS 12813-2009).英文版本CEN ISO/TS 12813-2009
DIN CEN ISO/TS 17574-2011 电子收费.安全保护配置文件指南(ISO/TS 17574-2009).英文版本CEN ISO/TS 17574-2009
DIN ISO/IEC 15504-3-2011 信息技术.过程评定.第3部分:执行评估指南(ISO/IEC 15504-3-2004)
DIN ISO/IEC 15504-2-2011 信息技术.过程评定.第2部分:执行评估(ISO/IEC 15504-2-2003 + Cor. 1-2004)
DIN ISO/IEC 15504-5-2011 信息技术.过程评定.第5部分:一个示范过程评价模型(ISO/IEC 15504-5-2006)
DIN ISO/IEC 15504-1-2011 信息技术.过程评定.第1部分:概念和词汇(ISO/IEC 15504-1-2004)
DIN ISO/IEC 27000-2011 信息技术.安全技术.信息安全管理系统.总论和词汇(ISO/IEC 27000-2009)
DIN EN ISO 11073-20601-2011 保健信息学.个人保健设备通信.第20601部分:应用配置文件.最佳交换协议(ISO/IEEE 11073-20601-2010).英文版本EN ISO 11073-20601-2011
DIN EN 62458-2011 音响系统设备.声电变换器.大信号参数的测定(IEC 62458-2010).德文版本EN 62458-2011
DIN EN 60749-23-2011 半导体器件.机械和气候试验方法.第23部分:高温寿命周期(IEC 60749-23-2004 + A1-2011).德文版本EN 60749-23-2004 + A1-2011
DIN EN 302372-1-2011 电磁兼容性和无线电频谱情况(ERM).短距离装置(SRD).侦查和移动设备.在频带为5.8 GHz,10 GHz,25 GHz,61 GHz和77 GHz范围内运行的探测雷达液舱液位(TLPR).第
DIN Merkblatt 3-2011 内部网络用本企业内DIN标准副本.用于存档(订货和供货,鉴定,课程和研讨会资料)
DIN SPEC 77224-2011 通过良好的服务意识达到顾客感动
DIN EN ISO/IEC 17021-2011 合格评定.对管理系统的审计和鉴定机构的要求(ISO/IEC 17021-2011).德文和英文版本EN ISO/IEC 17021-2011
DIN EN 15733-2011 房地产经纪人服务.房地产经纪人服务的提供要求.德文版本EN 15733-2009
DIN Merkblatt 1-2011 用于广告业的DIN标准副本发行(例如目录,供货列表,传单等).文献用途(如书籍,技术杂志及类似出版物)
DIN Merkblatt 4-2011 用于教学的DIN标准副本
DIN Merkblatt 2-2011 DIN标准的翻译
DIN CEN/TS 15844-1-2011 邮政服务.信件邮寄项目的ID标签.第1部分:ID标签结构,消息和二进制.英文版本CEN/TS 15844-1-2010
DIN CEN/TS 15844-5-2011 邮政服务.信件邮寄项目的ID标签.第5部分:小型信件的4-状态编码规范.英文版本CEN/TS 15844-5-2010
DIN CEN/TS 15844-3-2011 邮政服务.信件邮寄项目的ID标签.第3部分:BNB-62编码规范.英文版本CEN/TS 15844-3-2010
DIN CEN/TS 15844-4-2011 邮政服务.信件邮寄项目的ID标签.第4部分:平板书写纸的状态编码规范.英文版本CEN/TS 15844-4-2010
DIN CEN/TS 15121-2-2011 邮政服务.混合邮件.第2部分:电子邮政担保服务(SePS)接口规范.ECPM服务.英文版本CEN/TS 15121-2-2011
DIN CEN/TS 15121-1-2011 邮政服务.混合邮件.第1部分:电子邮政担保服务(SePS)接口规范.概念,计划和操作.英文版本CEN/TS 15121-1-2011
DIN CEN/TS 15844-2-2011 邮政服务.信件邮寄项目的ID标签.第2部分:BNB-78编码规范.英文版本CEN/TS 15844-2-2010
DIN EN ISO 5364-2011 麻醉和呼吸设备.口咽导气管(ISO 5364-2008).德文版本EN ISO 5364-2011
DIN EN ISO 20349-2011 个人防护装备.抗高温危险和熔融金属溅出物如铸造厂和焊接现场场所的鞋类保护.试验方法和要求(ISO 20349-2010).德文版本EN ISO 20349-2010
DIN EN ISO 11609-2011 牙科学.洁齿剂.要求,试验方法和标志(ISO 11609-2010).德文版本EN ISO 11609-2010
DIN EN ISO 1942-2011 牙科学.词汇表(ISO 1942-2009, 修正版本2010-03-01).德文版本EN ISO 1942-2010
DIN ISO/TS 29843-1-2011 土质.土壤微生物多样性测定.第1部分:磷脂脂肪酸(PLFA)分析和磷脂乙醚油脂(PLEL)分析方法(ISO/TS 29843-1-2010)
DIN EN ISO 4254-10-2011 农业机械.安全性.第10部分:旋转式摊草机和搂草机(ISO 4254-10-2009).德文版本EN ISO 4254-10-2009 + AC-2010
DIN CEN ISO/TS 22117-2011 食品和动物饲料微生物学.实验室间相互比对的熟练水平试验用具体要求和指南(ISO/TS 22117-2010).德文版本CEN ISO/TS 22117-2010
DIN CLC/TS 60034-18-33-2011 旋转电机.第18-33部分:绝缘系统的功能评价.模绕组用试验规程.耐同步热应力和电应力的多因素评价(IEC/TS 60034-18-33-2010).德文版本CLC/TS 60034-
DIN V VDE V 0126-1-1/A1-2011 发电机和公共低压输电网间的自动断开装置
DIN EN ISO 11664-2-2011 比色法.第2部分:CIE 标准光源(ISO 11664-2-2007).德文版本EN ISO 11664-2-2011
DIN EN ISO 11664-5-2011 比色法.第5部分:CIE 1976 L*u*v*颜色空间和u',v'均匀色度比例图(ISO 11664-5-2009).德文版本EN ISO 11664-5-2011
DIN EN ISO 11664-1-2011 比色法.第1部分:CIE标准比色观测器(ISO 11664-1-2007).德文版本EN ISO 11664-1-2011
DIN CLC/TS 60034-24-2011 旋转电机.第24部分:在线探测和诊断旋转电机和轴承电流的有源部件的潜在缺陷.应用指南(IEC/TS 60034-24-2009).德文版本CLC/TS 60034-24-2011
DIN CLC/TS 60034-18-42-2011 旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验(IEC/TS 60034-18-42-2008).德文版本CLC/TS 6003
DIN EN 61666-2011 工业系统,设施,设备和工业产品.系统中端子的识别(IEC 61666-2010).德文版本EN 61666-2010 + Cor.-2010
DIN EN 60384-26-1-2011 电子设备用固定式电容器.第26-1部分:空白详细规范.带有导电性聚合物固体电解质的固定式铝电解电容器.评定等级EZ(IEC 60384-26-1-2010).德文版本EN 60384-26-1-
DIN EN 60335-2-76-2011 家用和类似用途电器.安全性.第2-76部分:电栅栏充电器的详细要求(IEC 60335-2-76-2002,修订版本+ A1-2006).德文版本EN 60335-2-76-2005 + A1-
DIN IEC/PAS 62569-1-2011 产品信息通用规范.第1部分:原理和方法(IEC/PAS 62569-1-2009)
DIN VDE 0100-560-2011 低压电气装置.第5-56部分:电气设备的选择和安装.安全性服务(IEC 60364-5-56-2009, 修订版本).德文版本实施 HD 60364-5-56-2010
DIN VDE 0100-510-2011 低压电力设备.第5-51部分:电气设备的选择和安装.通用规则(IEC 60364-5-51-2005, 修改件).德文版本实施 HD 60364-5-51-2009
DIN IEC/TS 62282-1-2011 燃料电池技术.第1部分:术语(IEC/TS 62282-1-2010)
DIN EN 60603-7-3-2011 电子设备连接器.第7-3部分:最高频率100 MHz的数据传输用8通道活动式和固定式屏蔽连接器的详细规格(IEC 60603-7-3-2010).德文版本EN 60603-7-3-2010
DIN EN 15442-2011 固体回收燃料.取样方法.德文版本EN 15442-2011
DIN EN 15402-2011 固体回收燃料.易挥发物含量的测定.德文版本EN 15402-2011
DIN EN 15358-2011 固体回收燃料.质量管理体系.固体回收燃料生产到应用的详细要求.德文版本EN 15358-2011
DIN EN 1992-1-1-2011 欧洲法规2.混凝土结构设计.第1-1部分:一般规则和建筑规则.德文版本EN 1992-1-1-2004 + AC-2010
DIN 3535-6-2011 供气用密封垫.第6部分:气阀,煤气设备和煤气主管道用基于合成纤维,石墨或聚四氟乙烯(PTFE)的密封垫材料
DIN EN 13565-2 Berichtigung 1-2011 固定式消防系统.泡沫系统.第2部分:设计,建造和维修.德文版本EN 13565-2-2009+AC-2009,DIN EN 13565-2-2009-09标准的勘误表.德
DIN EN 1996-1-2-2011 欧洲法规6:圬工结构的设计.第1-2部分:一般规则.防火结构设计.德文版本EN 1996-1-2-2005 + AC-2010
DIN EN ISO 11298-3-2011 地下供水网络的修缮用塑料管道系统.第3部分:紧配合管道衬里(ISO 11298-3-2010).德文版本EN ISO 11298-3-2011
DIN EN ISO 11296-1-2011 地下无压排水道及污水网的翻修用塑料管道系统.第1部分:综述(ISO 11296-1-2009).德文版本EN ISO 11296-1-2011
DIN EN ISO 11298-1-2011 地下供水网络的修缮用塑料管道系统.第1部分:总则(ISO 11298-1-2010).德文版本EN ISO 11298-1-2011
DIN EN ISO 11296-3-2011 地下无压排水道及污水网的翻修用塑料管道系统.第3部分:无缝管道的衬里(ISO 11296-3-2009+Cor.1-2011).德文版本EN ISO 11296-3-2011
DIN EN ISO 11296-4-2011 地下无压排水道及污水网的翻修用塑料管道系统.第4部分:固化在管道中的衬里(ISO 11296-4-2009,修正版本2010-06-01).德文版本EN ISO 11296-4-2011
DIN EN ISO 21003-2-2011 建筑物内部用冷热水装置的多层管道系统.第2部分:管道(ISO 21003-2-2008 + Amd 1-2011).德文版本EN ISO 21003-2-2008 + A1-2011
DIN EN ISO 29601-2011 涂料和清漆.防护漆体系的防腐蚀.干膜内多孔性的评价(ISO 29601-2011).德文版本EN ISO 29601-2011
DIN EN 15269-10-2011 门,百叶窗和可开窗组合,包括建筑五金元件的耐火性和/或烟雾控制试验结果的扩展应用.第10部分:轧钢滚动式链子装配.德文版本EN 15269-10-2011
DIN EN 413-1-2011 砌筑水泥.第1部分:组成,规范和合格标准.德文版本EN 413-1-2011
DIN EN 13353-2011 实木板材(SWP).要求.德文版本EN 13353-2008+A1-2011
DIN EN 654-2011 弹性地板覆盖物.半柔性聚氯乙烯瓷砖.规格.德文版本EN 654-2011
总计406626个记录,共407页。 第一页 上一页 下一页 最末页