当前位置: 网站地图

所有标准资料

ASTM D 1351-2008 电线和电缆用热塑性聚乙烯绝缘材料的标准规范
ASTM E 1725-2008 电气系统部件用耐火阻隔系统的着火试验用标准试验方法
ASTM E 2542-2008 人员净化室用便携式热水器的标准规范
ASTM C 967-2008 铀矿浓缩物的标准规范
ASTM C 1411-2008 同位素分析前铀和钚的离子交换分离用标准实施规程
ASTM A 615/A 615M-2008 混凝土增强用变形和普通钢坯棒的标准规范
ASTM D 4543-2008 岩石芯样制备及尺寸和形状公差测定的标准实施规程
ASTM D 3740-2008 工程设计及建筑中使用的土壤和岩石的试验和/或检查中所用试剂最低要求的标准实施规程
ASTM D 4107-2008 饮用水中氚含量的标准试验方法
ASTM E 119-2008 建筑结构和材料防火试验用标准试验方法
ASTM D 4799-2008 沥青材料加速风化试验条件和过程的标准实施规程(荧光UV、洒水和冷凝法)
ASTM D 5731-2008 岩石点负荷强度指数的测定以便用于岩石强度分类的标准试验方法
ASTM D 4914-2008 用试验井中砂子替代法在现场测定土壤和岩石密度的标准试验方法
ASTM D 1084-2008 粘合剂黏度的标准试验方法
ASTM A 805-2008 冷轧碳素钢扁平钢丝的标准规范
ASTM C 1116/C 1116M-2008 纤维加固混凝土的标准规范
ASTM C 457-2008 硬化混凝土中孔隙系统参数的显微测定用试验方法
ASTM D 5684-2008 与堆垛地板覆盖物相关的标准术语
ASTM C 922-2008 烧结氧化钆及二氧化铀丸用标准规范
ASTM C 494/C 494M-2008 混凝土用化学混合物的标准规范
ASTM C 1417-2008 直接设计的钢筋混凝土污水管、雨水管和涵管的制造用标准规范
ASTM C 1526-2008 蛇纹石规格石料的标准规范
ASTM C 1021-2008 建筑密封材料的从事于试验用实验室的标准实施规程
ASTM D 6521-2008 用加压老化容器(PAV)进行沥青粘结剂加速老化的标准实施规程
ASTM C 616-2008 石英基规格石料用标准规范
ASTM F 1908-2008 住宅室外游泳池、热水浴缸和水疗设施用栅栏的标准指南
ASTM C 595-2008 混合水硬性水泥用标准规范
ASTM E 2207-2008 带有薄壁管状样品的应力控制轴向扭曲疲劳试验用标准实施规程
ASTM F 1665-2008 与链接栅栏一起使用的聚氯乙烯(PVC)和其他相似有机聚合物涂覆的带刺钢丝网用标准规范
ASTM C 503-2008 大理石规格石料的标准规范
ASTM D 4957-2008 用真空毛细管粘度计测定沥青乳剂残余物和非牛顿沥青的外观粘度用标准试验方法
ASTM C 913-2008 水和污水结构用预制混凝土的标准规范
ASTM D 3289-2008 用镍坩埚法测定半固态及固态沥青材料的密度用标准试验方法
ASTM E 2484-2008 超高层建筑物外部疏散控制的缓降器用标准规范
ASTM F 1664-2008 与链接栅栏一起使用的聚氯乙烯(PVC)和其他相似有机聚合物涂覆的拉伸钢丝用标准规范
ASTM D 3105-2008 弹性和塑性屋顶和防水材料的试验方法用标准索引
ASTM C 1417M-2008 直接设计的钢筋混凝土污水管、雨水管和涵管的制造用标准规范(米制)
ASTM D 4798-2008 沥青材料的加速老化试验条件和程序的标准实施规程(氙弧法)
ASTM A 490a-2008 最小抗拉强度为150ksi的热处理合金钢结构螺栓用标准规范
ASTM D 4219-2008 测定化学灌浆土壤无限耐压缩强度指数的标准试验方法
ASTM D 5202-2008 测定化学灌浆土壤三轴压缩蠕变强度的标准试验方法
ASTM E 1317-2008 船舶表面涂层易燃性的标准试验方法
ASTM D 5453a-2008 用紫外线荧光法测定轻质烃、火花点燃发动机燃料和柴油机燃料和润滑油中硫总量的标准试验方法
ASTM D 3306-2008 汽车及轻型设备用乙二醇基发动机冷却剂的标准规范
ASTM D 70-2008 半固体沥青材料的密度用标准试验方法(比重瓶法)
ASTM D 5106-2008 沥青筑路混合物用炼钢炉渣集料用标准规范
ASTM D 3241-2008 航空涡轮机燃料热氧化稳定性的标准试验方法(JFTOT程序)
ASTM D 1655-2008 航空涡轮机燃料的标准规范
ASTM D 7421-2008 使用高频线性振荡(SRV)试验机测定润滑脂极端压力特性的标准试验方法
ASTM E 1354-2008 利用氧消耗热量仪测量材料和产品的热和可见烟雾释放速率的标准试验方法
ASTM D 6786-2008 用自动光学粒子计数器测定矿质绝缘油中粒子数的标准试验方法
ASTM E 2214-2008 说明和鉴定颜色测定仪性能的标准实施规程
ASTM E 809-2008 测量反光镜光度特性的标准实施规程
ASTM F 1405-2008 测定直接热成像产品的动态热敏感性的标准试验方法.Atlantek方法
ASTM D 6973-2008 高压定容叶轮泵中石油液压液耐磨特性指示的标准试验方法
ASTM E 1921-2008 测定碳素体钢在转变范围内基准温度T的标准试验方法
ASTM A 915/A 915M-2008 化学要求类似于标准锻造等级的碳素钢、合金钢铸件的标准规范
ASTM E 2283-2008 钢和其它微观结构部件中非金属夹杂物极限值分析的标准实施规程
ASTM E 6-2008 与机械试验方法相关的标准术语
ASTM E 1289-2008 声传输损耗的基准试样的标准规范
ASTM F 1951-2008 测定运动场设备下部和周围地面系统易维护性的标准规范
ASTM D 1555M-2008 工业芳香烃和环己胺计量体积和重量计算的标准试验方法
ASTM C 1168-2008 分析用钚材料的制备和溶解的标准实施规程
ASTM F 2688-2008 以体系为基础、以顾客为中心的制造商质量计划的标准指南
ASTM E 648-2008 利用辐射热能源的地板涂覆系统的临界辐射通量用标准试验方法
ASTM D 7440-2008 空气质量测量中表征的不确定性用标准实施规程
ASTM E 2552-2008 新型能量化合物的环境和人类健康影响评估用标准指南
ASTM D 7439-2008 用感应耦合等离子体质谱法测定空气颗粒物元素的标准试验方法
ASTM D 6232-2008 废物和污染介质数据收集活动用取样设备选择的标准指南
ASTM D 2777-2008 D19水委员会应用试验方法的精确性及偏差测定的标准实施规范
ASTM F 2122-2008 树架(Treestand)安全设备的标准实施规程
ASTM F 1446-2008 用于评估防护头盔性能特点的设备和程序的标准试验方法
ASTM F 952-2008 电动食品搅拌机的标准规范
ASTM F 1568-2008 食品电子加工机标准规范
ASTM E 1353a-2008 装软垫的家具部件耐香烟点燃性用标准试验方法
ASTM F 2343-2008 牲畜、肉类和家禽评估装置用标准试验方法
ASTM F 1126-2008 食品电切刀用标准规范
ASTM E 1352a-2008 模型化装软垫的组合家具耐香烟点燃性的标准试验方法
ASTM D 6073-2008 用热固测试计测定热固印刷油墨相对凝固性的标准试验方法
ASTM F 963-2008 玩具安全的消费者安全标准规范
ASTM F 2236-2008 软质婴儿运载工具的消费者安全标准规范
ASTM E 1353-2008 装软垫家具的部件的耐香烟点燃性的标准试验方法
ASTM F 2088-2008 婴幼儿秋千的标准消费者安全规范
ASTM E 135a-2008 与金属、矿石及其相关材料用分析化学相关的标准术语
ASTM G 195-2008 用双头研磨器旋转平台进行磨损试验的标准指南
ASTM D 6966-2008 金属的连续测定用扫取样法对固定尘埃样品收集的标准实施规范
ASTM B 806-2008 通用铜合金永久模铸件的标准规范
ASTM B 763-2008 阀门用铜合金砂型铸造的标准规范
ASTM B 587-2008 焊接的黄铜管用标准规范
ASTM B 30-2008 铜合金铸锭标准规范
ASTM A 928/A 928Ma-2008 填充金属附加物电熔焊接铁素体/奥氏体(二联)不锈钢管的标准规范
ASTM A 1055-2008 锌和环氧树脂双涂层钢筋棒用标准规范
ASTM B 775-2008 镍和镍合金焊接管一般要求用标准规范
ASTM A 957/A 957M-2008 一般工业用共同要求的熔模铸造钢和合金的标准规范
ASTM A 269-2008 通用无缝和焊接奥氏体不锈钢管用标准规范
ASTM B 176-2008 铜合金压模铸件用标准规范
ASTM A 6/A 6M-2008 轧制结构钢棒材、厚板材、型材和板桩用一般要求的标准规范
ASTM B 793-2008 薄钢板精整压模和塑料注模用锌铸造合金锭的标准规范
ASTM A 790/A 790M-2008 无缝和焊接铁素体/奥氏体不锈钢管的标准规范
ASTM A 182/A 182M-2008 高温设备用锻制或轧制合金和不锈钢管法兰、锻制配件、和阀门及零件的标准规范
ASTM E 1277-2008 用感应耦合等离子体(ICP)发射光谱法对锌-5%铝-混合稀土合金的化学分析用标准试验方法
ASTM D 1662-2008 切削润滑油中活性硫的标准试验方法
ASTM A 917-2008 要求标识每面镀层重量的电解镀锌钢薄板的标准规范(一般要求)
ASTM A 480/A 480M-2008 扁平轧制不锈钢和耐热钢厚板材、薄板材和带材一般要求的标准规范
ASTM B 730-2008 焊接镍(UNS N02200/UNS N02201)和镍铜合金(UNS N04400)管用标准规范
ASTM B 351/B 351M-2008 核设备用热轧和冷加工锆和锆合金棒材、杆材和线材的标准规范
ASTM A 789/A 789M-2008 通用无缝和焊接铁素体/奥氏体不锈钢管的标准规范
ASTM B 505/B 505M-2008 铜合金连续浇铸件的标准规范
ASTM B 36/B 36M-2008 黄铜厚板材、薄板材、带材和轧制棒材的标准规范
ASTM A 249/A 249M-2008 焊接奥氏体钢锅炉、过热器、换热器和冷凝器管用标准规范
ASTM E 1852-2008 石墨炉原子吸收光谱测定法测定碳和低合金钢中锑低含量的标准试验方法
ASTM B 167-2008 镍铬铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和 N06045)和镍铬钴钼合金(UNS N06617)无缝管的标准规范
ASTM A 814/A 814M-2008 冷加工焊接奥氏体不锈钢管用标准规范
ASTM A 312/A 312M-2008 无缝、焊接和强冷加工奥氏体不锈钢管用标准规范
ASTM A 723/A 723M-2008 高强度压力元件用合金钢锻件的标准规范
ASTM E 536-2008 锌和锌合金的化学分析用标准试验方法
ASTM B 166-2008 镍铬铁合金(UNS N06600、N06601、N06603、N06690、N06693、 N06025、N06045和N06696)和镍铬钴钼合金(UNS N06617)杆材、棒材和线材
ASTM E 135-2008 关于金属、矿石及相关物质分析化学的标准术语
ASTM A 966/A 966M-2008 用交流电检验钢锻件磁粉粒的标准实施规程
ASTM A 833-2008 用比较硬度测试仪测定金属材料的压痕硬性的标准实施规程
ASTM A 990-2008 防腐保压零件特殊控制用铁镍铬及镍合金铸件的标准规范
ASTM A 636-2008 氧化镍烧结块的标准规范
ASTM B 168-2008 镍铬铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025、N06045和N06696)及镍铬钴钼合金(UNS N06617)板材、片材和带材
ASTM B 632/B 632M-2008 铝合金轧制支撑板的标准规范
ASTM B 362-1991 热电仪表双金属螺旋管的机械扭矩率用标准试验方法
ASTM D 7443-2008 地下采矿范围用最少地理空间数据的标准实施规程
ASTM D 121-2008 煤和焦炭的标准术语
ASTM E 253-2008 与材料和产品感官评估相关的标准术语
ASTM E 2524-2008 纳米颗粒溶血特性分析用标准试验方法
ASTM E 384a-2008 材料微压痕硬度的标准试验方法
ASTM D 4007-2008 离心法(实验室方法)测定原油中水和沉积物的标准试验方法
ASTM D 7321-2008 试验室过滤法测定生物柴油B100混合原料生物柴油酯和生物柴油混合物用标准试验方法
ASTM D 4294-2008 用能量扩散X-射线荧光光度法测定石油和石油产品中硫含量的标准试验方法
ASTM D 7442-2008 使用感应耦合等离子体原子发射光谱法进行元素分析的流化床催化裂化催化剂和沸石样品的制备用标准实施规程
ASTM D 396-2008 燃料油的标准规范
ASTM D 2622-2008 用波长色散X射线荧光光谱法测定石油产品硫含量的标准试验方法
ASTM D 4175b-2008 石油、石油产品和润滑剂相关标准术语
ASTM D 4213-2008 用磨蚀失重法对涂料耐磨性的标准试验方法
ASTM D 7215-2008 来自馏分燃料模拟蒸馏分析的计算闪点的标准试验方法
ASTM D 6349-2008 感应耦合等离子体-原子发散光谱法测定煤和焦炭燃烧产生的煤、焦炭和固体残留物中主要和次要元素的标准试验方法
ASTM D 5016-2008 使用带红外线吸收的高温试管炉燃烧法测定煤、焦炭燃烧灰分中硫总含量的标准试验方法
ASTM E 2409-2008 一甘醇、二甘醇、三甘醇和四甘醇中甘醇杂质的标准试验方法(气相色谱法)
ASTM E 1616-2008 用气体色谱法分析乙酸酐的标准试验方法
ASTM F 2602-2008 用带多角度光散射检测的尺寸排除色谱法(SEC-MALS)测定壳聚糖和壳聚糖盐的摩尔质量用标准试验方法
ASTM D 6342-2008 聚氨酯原料的标准实施规程:利用近红外(NIR)光谱法测定多元醇中的羟基值
ASTM F 2023-2008 交联聚乙烯(PEX)管道和系统耐含氯热水氧化性的评估用标准试验方法
ASTM D 5279-2008 塑料用标准试验方法:动力机械性能:在扭转中
ASTM D 638-2008 塑料拉伸性能的标准试验方法
ASTM D 4101-2008 聚丙烯注塑和挤压材料的标准规范
ASTM D 4473-2008 塑料的标准试验方法:动力机械性能:固化特性
ASTM D 6267-2008 升温条件下烃类树脂的表观粘度的标准试验方法
ASTM D 3206-2008 地板擦亮剂的抗污物用标准试验方法
ASTM D 1566a-2008 橡胶相关标准术语
ASTM D 7426-2008 聚合物或弹性化合物T测定用DSC程序指定的标准试验方法
ASTM D 4968-2008 塑料的试验方法和规范的年度复审用标准指南
ASTM D 3035-2008 基于受控外径的聚乙烯(PE)塑料管(DR-PR)标准规范
ASTM D 1044-2008 透明塑料表面耐磨蚀性的标准试验方法
ASTM F 2623-2008 升温的PE-RT材料标准尺寸比(SDR)为9管道的聚乙烯用标准规范
ASTM D 6779-2008 聚酰胺(PA)模塑和挤压材料的标准分类系统
ASTM E 1754-2008 用红外线分光光度测定法测定液态氯中低水面的标准试验方法
ASTM D 4993-2008 反向渗透用二氧化硅(SiO)缩放比例的计算和调整用标准实施规程
ASTM C 903-2008 用冷喷射法的耐火可浇铸材料样品的制备用标准实施规程
ASTM F 1233-2008 安全玻璃材料和系统的标准试验方法
ASTM D 3053-2008 与炭黑相关的标准术语
ASTM C 1282-2008 用离心光电沉淀法测定高级陶瓷粒径分布的标准试验方法
ASTM D 4195-2008 反向渗透和纳米筛选用水分析的标准指南
ASTM D 1245-2008 用化学显微镜法检验水形成沉积物的标准实施规程
ASTM D 3766-2008 催化剂和催化作用相关标准术语
ASTM D 4785-2008 水中碘放射性同位素的低级别分析用标准试验方法
ASTM D 4739-2008 电势盐酸滴定法测定碱值的标准试验方法
ASTM E 2161-2008 与热分析中性能鉴定相关的标准术语
ASTM E 1064-2008 用卡尔费歇尔库仑滴定法测定有机液体中水含量的标准试验方法
ASTM D 5462-2008 水中低水平溶解氧在线测量用标准试验方法
ASTM D 7284-2008 使用气体扩散分离和电流计探测流量注入分析法测定水中总氰化物含量的标准试验方法
ASTM F 2605-2008 用带多角度光散射检测的尺寸排除色谱法(SEC-MALS)测定藻酸盐钠的摩尔质量用标准试验方法
ASTM E 299-2008 有机溶剂中过氧化物痕量的标准试验方法
ASTM E 176-2008 防火标准的标准术语
ASTM D 5631-2008 卤代烷1301一溴三氟甲烷(CFBR)灭火器的搬运、运输和贮藏用标准实施规程
ASTM E 1352-2008 模型化装软垫的组合家俱耐香烟点燃性的标准试验方法
ASTM F 1296-2008 化工防护服评价用标准指南
ASTM F 2061-2008 化学防护服的标准实施规程:磨损、护理和维修说明书
ASTM F 1939-2008 带连续加热的耐火服装材料的抗辐射热用标准试验方法
ASTM F 1356-2008 控制病原体和其他微生物的新鲜和冷冻瘦肉与家禽的照射用标准实施规程
ASTM F 1061-2008 滑雪板装配试验装置用标准规范
ASTM A 928/A 928M-2008 附加填料金属的电熔焊铁素体/奥氏体(双重)不锈钢管的标准规范
ASTM A 426/A 426M-2008 高温设备用离心铸造铁素体合金钢管的标准规范
ASTM A 623-2008 锡轧制产品用标准规范.一般要求
ASTM E 2375-2008 锻造产品超声检验的标准实施规程
ASTM F 1083-2008 栅栏结构用热浸镀锌焊接钢管的标准规范
ASTM A 623M-2008 锡轧制产品用标准规范.一般要求(米制)
ASTM E 1321-2008 材料引燃和火焰曼延性能的标准试验方法
ASTM E 384-2008 材料的微压痕硬度的测试用标准试验方法
ASTM D 3628-2008 乳化沥青的选择和使用的标准实施规程
ASTM D 6933-2008 乳化沥青中特大粒子的标准试验方法(筛分法)
ASTM D 7430-2008 煤机械取样的标准实施规程
ASTM D 5373-2008 煤的实验室样品中碳、氢和氮的仪器测定用标准试验方法
ASTM F 714-2008 以外径为基准的聚乙烯(PE)塑料管(SDR-PR)用标准规范
ASTM F 2160-2008 基于外径(OD)受控的实心壁高密度聚乙烯(HDPE)导管用标准规范
ASTM D 2663-2008 炭黑的标准试验方法.橡胶中的分散
ASTM D 1510-2008 炭黑的标准试验方法.吸碘值
ASTM D 4789-2008 (4,4-二酚基丙烷)双酚A溶液颜色的标准试验方法
ASTM D 4493-2008 (4,4-二酚基丙烷)双酚A凝固点的标准试验方法
ASTM F 2649-2008 波纹状高密度聚乙烯集油槽的标准规格
ASTM D 6976-2008 橡胶避孕用具的标准规范.阴道膜
ASTM D 2414-2008 炭黑的标准试验方法.油吸收值(OAN)
ASTM C 1684-2008 室温下高级陶瓷抗弯强度的标准试验方法. 圆杆强度
ASTM C 1465-2008 升温下用恒定应力速度挠曲试验测定高级陶瓷的慢裂增长系数的标准试验方法
ASTM C 1649-2008 用仪器进行涂层和无涂层平面玻璃颜色透射色测量的标准实施规程
ASTM D 5632-2008 Halon 1301、三氟甲溴(CFBr)的标准规范
ASTM C 1259-2008 用振动脉冲激励法的高级陶瓷用动态杨氏模量、剪切模量和泊松比的标准试验方法
ASTM C 1683-2008 采用魏布尔统计法测定先进陶瓷抗拉强度缩放比例的标准实施规程
ASTM D 3760-2008 用气相色谱法分析异丙苯的标准试验方法
ASTM E 1821-2008 用气相色谱法测定生物物质中碳水化合物的标准试验方法
ASTM E 1756-2008 生物量中总固体含量的测定用标准试验方法
ASTM E 1690-2008 生物量中乙醇萃取物的测定用标准试验方法
ASTM D 3213-2008 海底原始松软积土的搬运、储藏和制备的标准实施规程
ASTM E 2566-2008 城市搜救设施用机器人远距操作用船上视频系统的视觉灵敏度和视域的测定用标准试验方法
ASTM F 1713-2008 外科植入物用锻制钛-13铌-13锆合金的标准规范(UNS R58130)
ASTM F 1581-2008 外科植入物用无机骨料成分的标准规范
ASTM F 139-2008 外科植入物用锻制18铬-14镍-2.5钼不锈钢薄板材和带材用标准规范(UNS S31673)
ASTM D 4564-2008 用套筒法测定现场土壤密度和单位重量的标准试验方法
ASTM D 4286-2008 核动力发电机装置用涂覆承包人资格鉴定的标准实施规程
ASTM E 543-2008 实施无损检验的机构用标准规范
ASTM D 6513-2008 标准耐火试验用木框架墙超强荷载的计算用标准实施规程
ASTM D 3916-2008 挤拉制玻璃纤维增强塑料棒的抗拉特性用标准试验方法
ASTM F 2049-2008 公共、商用和多家庭住宅户外游戏场所用栅栏/物障的标准指南
ASTM F 1334-2008 真空吸尘器A-加重声音功率级的测定用标准试验方法
ASTM E 1050-2008 使用A管、双扩音器和数字频率分析系统传声材料的阻抗和吸收的标准试验方法
ASTM D 3201-2008 防火木材和木制品吸湿特性的标准试验方法
ASTM D 2343-2008 增强塑料用玻璃纤维单纱、纱线和粗纱的抗拉特性用标准试验方法
ASTM D 6925-2008 用优质铺面旋转式压实机制备和测定热混沥青(HMA)样品相对密度的标准试验方法
ASTM D 6648-2008 使用弯曲束状流变仪(BBR)的沥青粘结剂柔性蠕变硬度的测定用标准试验方法
ASTM D 7428-2008 用微型Deval仪研磨法测定细集料抗降解性的标准试验方法
ASTM F 2696-2008 飞机电线系统的检验用标准实施规程
ASTM E 2428-2008 扭矩试验机检验扭矩示值用扭矩测量仪的校准用标准实施规程
ASTM E 1709-2008 在0.2度观测角用便携式反射计测量反向反射信号的标准试验方法
ASTM E 2191-2008 利用声辐射检查充气的丝绕复合压力容器的标准实施规程
ASTM D 6398-2008 增强标签上药物名称的识别用标准实施规程
ASTM D 3475-2008 防止儿童开启的包装用标准分类
ASTM E 2605-2008 财产接收的标准实施规程
ASTM D 5080-2008 压实百分数的快速测定用标准试验方法
ASTM D 4503-2008 用偏硼酸锂熔化法溶解固体废弃物的标准实施规程
ASTM F 1231-2008 在淡水及其它内陆环境、河流和小溪中使用浮油分散剂的生态考虑用标准指南
ASTM F 1210-2008 在淡水和其它内陆环境、湖泊及大型水体中使用浮油分散剂的生态考虑用标准指南
ASTM F 1209-2008 在淡水和其它内陆环境、池塘及沼泽中使用浮油分散剂的生态考虑用标准指南
ASTM E 943-2008 与生物效应和环境灾害相关的标准术语
ASTM D 7305-2008 印刷品的反射密度用标准试验方法
ASTM D 5010-2008 印刷油墨及相关材料试验的标准指南
ASTM F 1449-2008 耐燃烧、耐热、耐电弧性防护服装的工业洗烫用标准指南
ASTM D 7341-2008 用实际比例试验法建立结构胶合层压木料弯曲特性的特性值用标准实施规程
ASTM D 7334-2008 用前进接触角测量法测定涂层、衬底和颜料的表面润湿度用标准实施规程
ASTM D 610-2008 涂漆钢表面上锈蚀等级评估用标准实施规程
ASTM E 18-2008 金属材料的洛氏硬度用标准试验方法
ASTM E 1316-2008 无损检测用标准术语
ASTM D 5367-2008 用水或水/磨料喷洗时为防止钢生薄锈用抑制剂处理的表面镀层的评估用标准实施规程
ASTM D 3359-2008 通过胶带试验测量粘合性的标准试验方法
ASTM D 3917-2008 热固性玻璃增强塑料挤拉制型材的尺寸公差用标准规范
ASTM D 7401-2008 用拉离和跌落试验的岩石锚钉性能实验室测定用标准试验方法
ASTM F 2078-2008 与氢脆化试验相关的标准术语
ASTM D 6736-2008 乳胶涂料的抗摩擦用标准试验方法
ASTM E 2539-2008 干涉颜料多角度颜色测量用标准实施规程
ASTM D 7377-2008 路标漆耐水洗刷性评估的标准实施规程
ASTM D 1535-2008 用孟塞尔颜色系统规定颜色的标准实施规程
ASTM D 3607-2008 用汽提法从用过的发动机油中移除挥发性杂质的标准试验方法
ASTM D 4239-2008 高温管式炉燃烧法测定煤和焦炭分析样品中硫含量的标准试验方法
ASTM D 1600-2008 与塑料相关的缩略语用标准术语
ASTM D 4637-2008 单层屋顶膜中使用的乙丙三元橡胶(EPDM)薄板的标准规范
ASTM D 3575-2008 烯烃聚合物制软质多孔材料的标准试验方法
ASTM D 1693-2008 乙烯塑料的环境应力断裂的标准试验方法
ASTM D 4385-2008 热固性增强塑料挤拉制产品中可见缺陷分类的标准实施规程
ASTM D 4000-2008 指定塑料材料的标准分类系统
ASTM D 883-2008 与塑料相关的标准术语
ASTM D 4635-2008 通用和包装用低密度聚乙烯制聚乙烯薄膜的标准规范
ASTM D 5309-2008 环己胺999的标准规范
ASTM D 2000-2008 汽车用橡胶制品的标准分类系统
ASTM D 34-2008 白颜料的化学分析用标准指南
ASTM D 2457-2008 塑料薄膜和固态塑料镜面光泽度的标准试验方法
ASTM E 8/E 8M-2008 金属材料的抗拉试验用标准试验方法
ASTM C 1198-2008 用声谐振测定高级陶瓷的动态扬氏模量、剪切模量和泊松比的标准试验方法
ASTM D 7375-2008 用库仑卡尔费歇尔滴定法测定芳烃及其混合物中水的微量用标准试验方法
ASTM D 2360-2008 用气相色谱法测定单环芳烃中微量杂质的标准试验方法
ASTM F 410-2008 光学测量法对弹性地板覆盖物的磨损层厚度用标准试验方法
ASTM E 2608-2008 设备控制矩阵(ECM)用标准实施规程
ASTM D 1566-2008 橡胶相关的标准术语
ASTM E2641-2009 安全三维成像技术最佳安全应用的标准实施规程
ASTM F1843-2009 抛光光泽测量用透明塑料薄膜的样品制备的标准指南
ASTM E1453-2009 包含模拟或数字X射线检验数据介质的存储标准规范
ASTM E1018-2009 ASTM已经获得评价的截面数据文件的标准指南E 706(ⅡB)
ASTM B885-2009 印刷线路板触点上存在杂质的标准试验方法
ASTM E2674-2009 评估移动数据存储设备(MDSD)损失造成影响的标准实施规程
ASTM E1830-2009 测定光电压模数的机械一体性的标准试验方法
ASTM E2150-2009 寿命周期环境工作元件的标准分类.环境损耗元件结构
ASTM E2691-2009 生产率测度标准规范
ASTM E2131-2009 财产丢失、损害或破坏评估的标准实施规程
ASTM E2715-2009 动产库存量的标准实施规程
ASTM E2279-2009 建立所有权管理的导向原则的标准实施规程
ASTM E2329-2009 扣押毒品鉴定的标准实施规程
ASTM E2589-2009a 有关粉末特性非筛选法的术语
ASTM E253-2009a 材料和产品感官评定的相关标准术语
ASTM E2439-2009 法医心理生理欺骗检测(测谎)中使用的仪器、传感器和操作软件的标准指南
ASTM E2678-2009 计算机取证的教育和培训的标准指导办法
ASTM E284-2009a 外观的标准术语
ASTM E2549-2009 检获毒品分析方法的验证的标准实施规程
ASTM E6-2009b 有关力学试验方法的标准术语
ASTM F1749-2009 合格设备和合格设施安全标志和标签的标准规范
ASTM E2676-2009 有形资产流动指数(MI)的标准实施规程
ASTM E2287-2009 单击薄膜色带和打印文本上断裂字模和纸纤维印记检验的标准指南
ASTM E444-2009 法院文献审查员的工作范围用标准指南
ASTM E2011-2009 评价全部用手工消除病毒活性的人工洗涤方法和手擦配方的标准试验方法
ASTM E1986-2009 健康信息的信息访问特权的标准指南
ASTM F1886/F1886M-2009 目视检查测定医药包装密封件完整性的标准试验方法
ASTM F2757-2009 耐燃烧、耐热、耐电弧性防护服装的水洗和维护标准指南
ASTM F2580-2009 最接近固定股骨髋假体标准接头的评估用标准试验方法
ASTM E2476-2009 影响到PAT过程的设计、制定及实施的制药业风险评定与风险控制的指南
ASTM F2669-2009 操作员施用农药时防护服磨损的标准性能规范
ASTM G72/G72M-2009 高压富氧环境中液体和固体的自燃温度用标准试验方法
ASTM F2182-2009 磁共振成像时测量射频感应加热接近被动性植入物的标准试验方法
ASTM E2021-2009 尘埃层热表面燃烧温度的标准试验方法
ASTM E2195-2009 与咨询文件检验相关的标准术语
ASTM F2068-2009 股骨假体标准规范&8212;金属植入物
ASTM F2224-2009 医用高纯水合硫酸钙或二水硫酸钙规范
ASTM F641-2009 可植入的环氧树脂电子胶囊密封材料标准规范
ASTM F602-2009 可植入的热固性环氧塑料标准
ASTM E2030-2009a 荧光(磷光)安全标志推荐用标准指南
ASTM E2326-2009 查封药品分析员的教育和培训的标准实施规程
ASTM F1925-2009 外科植入物用半结晶(交酯)聚合物和共聚物树脂的标准规范
ASTM F1854-2009 医用植入物上多孔覆层的立体测量评价的标准试验方法
ASTM F2212-2009 作为组织工程医疗产品(TEMPs)用外科植入物和底层原材料的I型胶原特性的标准指南
ASTM E2693-2009 在湿金属切削环境中防止皮炎的标准规程
ASTM F1357-2009 全腕关节植入物的标准规范
ASTM F2732-2009 确定寒冷天气防护服温度额定值的标准实施规程
ASTM F2665-2009 全踝关节置换假体的标准规范
ASTM F2721-2009 节段性骨缺损临界粒度的活体潜伏期评定的标准指南
ASTM F1052-2009 气密的全密封化工防护套服加压的标准试验方法
ASTM E2682-2009 医疗转移科和职业用灾祸恢复方案开发的标准指南
ASTM F2759-2009 对超高分子量聚乙烯评估(UHMWPE)用于脊柱骨科和设备的标准指南
ASTM F2676-2009 防止电弧危害的电弧保护毯防护性能确定的标准试验方法
ASTM E2625-2009 控制在建筑及拆卸活动中因职业性接触吸入结晶硅的标准方法
ASTM F2130-2009 测量防护服材料对液体杀虫剂的排斥性、抑制能力和渗透性的标准试验方法
ASTM E2229-2009 欺骗性(复写器)数据精神心理学检测说明的标准实施规范
ASTM F2257-2009 外科植入物用锻造无缝或焊接和拉拔18铬-14镍-2.5钼不锈钢小直径管的标准规范(UNS S31673)
ASTM F2181-2009 外科植入物用锻造的无缝不锈钢管的标准规范
ASTM F90-2009 外科植入物用锻造钴-20铬-15钨-10镍合金的标准规范(UNS R30605)
ASTM E2388-2009 法医文献审查人的最低培训要求的标准指南
ASTM D1557-2009 用修正作用力56000 ft-Ibf/ft(2700 KN-m/m3)测量土壤实验室压实特性的标准试验方法
ASTM D143-2009 洁净木材小样品试验的标准试验方法
ASTM F2343-2009 家畜、肉和家禽评价设备的标准试验方法
ASTM D198-2009 结构尺寸木料静力试验法
ASTM G200-2009 土壤氧化还原电位(ORP)测量的标准试验方法
ASTM D6815-2009 木制和木基产品的荷载和蠕变效应的持续时间的评价的标准规范
ASTM E2639-2009a 废弃容器抗稻瘟病的标准试验方法
ASTM D6418-2009 用一次性芯取样器取样和储存土壤分析挥发性有机化合物的标准实施规程
ASTM E2686-2009 应用农药乳油(EC)模拟土壤影响测定挥发性有机化合物(VOC)溶剂吸收/利用的标准试验方法
ASTM D7263-2009 实验室测定土壤样品的密度(单位重量)的标准试验方法
ASTM F1736-2009 用辐照法控制真正鱼类和水生无脊椎动物食品病原体及有害微生物的标准指南
ASTM F2342/F2342M-2009 成分或质量要素测量设备或系统设计和建造的标准规范
ASTM E2110-2009e1 外部绝缘和精整系统(EIFS)的标准术语
ASTM E585/E585M-2009 压实的矿物绝缘、金属铠装、基底金属热电偶电缆的标准规范
ASTM D7131-2009 接合蓄电池隔板中离子交换能力测定的标准试验方法
ASTM D7129-2009 接合蓄电池隔板中氨的测定的标准试验方法
ASTM D7550-2009 采用离子色相光谱法测定氢电池和其他电池中灌注气体的的氨,碱和碱土金属含量的标准试验办法
ASTM D350-2009 电绝缘用经处理软套管的标准试验方法
ASTM D229-2009b 电绝缘用硬质薄板及板材的标准试验方法
ASTM D876-2009 电绝缘用非硬质聚氯乙烯管的标准试验方法
ASTM F2749-2009 测定薄膜开关或组件压痕效应的标准试验方法
ASTM F1604-2009 冰淇淋、软饮料、牛奶冰淇淋、饮料冷柜标准规范
ASTM F478-2009 绝缘线路软管及覆盖物的使用保养的标准规范
ASTM F450-2009 真空吸尘器软管的耐热性及可靠性的标准试验方法
ASTM F2592-2009 测量薄膜开关的力位移的标准试验方法
ASTM F1683-2009 薄膜开关、薄膜开关引线组件或薄膜开关元件折皱或弯曲的标准实施规程
ASTM F1663-2009 测定薄膜开关电阻的标准试验方法
ASTM F1661-2009 测定薄膜开关接触弹力的标准试验方法
ASTM F2750-2009 测定薄膜开关或薄膜开关组合弯曲影响的标准试验方法
ASTM F1842-2009 测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法
ASTM E1975-2009 S-280/G 电气设备外罩的标准规范
ASTM F2756-2009 测定真空吸尘器能量消耗的标准试验方法
ASTM F1812-2009 测定薄膜开关ESD屏蔽有效性的标准试验方法
ASTM F608-2009 家用/商用真空吸尘器去除地毯内藏污物的效果评定的标准试验方法
ASTM F25/F25M-2009 电子及类似用途用的清洁室及其它防尘区域空气中粒状杂质的筛分和计算的标准试验方法
ASTM F2715-2009 用于不带电设备的临时保护等电位联结毡的标准规范
ASTM E948-2009 模拟太阳光下使用参比池的光电池电性能的标准试验方法
ASTM B965-2009 可焊性用于电力电子应用的高性能锡涂层退火铜线的标准规范
ASTM F1796-2009 第1部分:超过600伏交流电压用电容式探测器的标准规范
ASTM E2649-2009 气相色谱分析测定在密封绝缘玻璃元件中氩浓度的标准试验方法
ASTM B857-2009 镀覆钢支持的成型钢丝压缩同心铺设铝绞线标准规范
ASTM C1549-2009 使用便携式太阳反射计测定接近室内温度太阳反射比的标准试验方法
ASTM E1171-2009 模拟温度和湿度的环境中光伏组件的的标准试验方法
ASTM E2527-2009 在自然光下集中陆地光电模块和系统的电气性能评级的标准试验方法
ASTM C1493-2009 用微分衰减系统钝化-活化中子计数法对废物中的核物质进行无损化验的标准试验方法
ASTM C1517-2009 用直流电弧发射光谱分析法测定铀金属或化合物中金属杂质的标准试验方法
ASTM C1233-2009 核材料中当量硼含量测定的标准实施规范
ASTM C750-2009 核纯级碳化硼粉末的标准规范
SAE J1837 Electroplate Requirements for Decorative Chromium Deposits on Zinc Base Materials Used for Exterior Ornamentat
SAE J1823 Specification Definitions-Articulated Rubber-Tired Forwarder
SAE J1817 Long-Stroke Air-Brake Actuator Marking
SAE J1577 Replaceable Motorcycle Headlamp Bulbs
SAE J151 Pressure Relief for Cooling System
SAE J1213/1 Glossary of Vehicle Networks for Multiplexing and Data Communications
SAE J1149 Metallic Air Brake System Tubing and Pipe
SAE J1444 Procedure for Evaluating Transient Response of Small Engine Driven Generator Sets
SAE J576 Plastic Materials for Use in Optical Parts Such as Lenses and Reflectors of Motor Vehicle Lighting Devices
SAE J38 Lift Arm Support Device for Loaders
SAE J2087 Daytime Running Light
SAE J2186 E/E Data Link Security
SAE J1570 Rubber Dust Boots for the Hydraulic Disc Brake Piston
SAE J306 Automotive Gear Lubricant Viscosity Classification
SAE J460 Bearing and Bushing Alloys-Chemical Composition of SAE Bearing and Bushing Alloys
SAE J946 Application Guide to Radial Lip Seals
SAE J459 Bearing and Bushing Alloys
SAE J2217 Photometric Guidelines for Instrument Panel Displays That Accommodate Older Drivers
SAE J1493 Guarding of Starter System Energization
SAE J393 Nomenclature-Wheels, Hubs, and Rims for Commercial Vehicles
SAE J1228 Small Craft--Marine Propulsion Engine and Systems--Power Measurements and Declarations
SAE J1707 Service Maintenance of SAE J1703 Brake Fluids in Motor Vehicle Brake Systems
SAE J2026 Recommended Practice for the Selection of Engineering Workstations
SAE J1775 Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft
SAE J1273 Recommended Practices for Hydraulic Hose Assemblies
SAE J68 Tests for Snowmobile Switching Devices and Components
SAE J1970 Shoreline Sound Level Measurement Procedure for Recreational Motorboats
SAE J1113/12 Electrical Interference by Conduction and Coupling---Coupling Clamp and Chattering Relay
SAE J1982 Nomenclature--Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles
SAE J585 Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J34 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
SAE J2244/1 Connections for Fluid Power and General Use-Ports and Stud Ends With Iso 261 Threads and O-Ring Sealing Part
SAE J2244/2 Connections for Fluid Power and General Use-Ports and Stud Ends With Iso 261 Threads and O-Ring Sealing Part
SAE J222 Parking Lamps (Front Position Lamps)
SAE J2215 Surface Match Verification Method for Pressure Sensitive Adhesively Attached Components
SAE J2099 Standard of Purity for Recycled Hfc-134a (R-134a) for Use in Mobile Air-Conditioning Systems
SAE J2108 Door Courtesy Switch
SAE J2005 Stationary Sound Level Measurement Procedure for Recreational Motorboats
SAE J1240 Flywheel Spin Test Procedure
SAE J1151 Methane Measurement Using Gas Chromatography
SAE J110 Seals--Testing of Radial Lip (Cancelled Oct 2002)
SAE J44 Service Brake System Performance Requirements-Snowmobiles
SAE J33 Snowmobile Definitions and Nomenclature-General
SAE J944 Steering Control System-Passenger Car-Laboratory Test Procedure (Cancelled Jan 1992)
SAE J1214 Tire to Body Clearance Check for Recreational Vehicles
SAE J536 Hose Clamps (Cancelled Jan 1992)
SAE J1441 Subjective Rating Scale for Vehicle Handling
SAE J1134 SAE Nodal Mount
SAE J392 Motorcycle and Motor Driven Cycle Electrical System-Maintenance of Design Voltage
SAE J743 Lift Capacity Calculation and Test Procedure-Pipelayer and Sideboom
SAE J1885 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-A
SAE J313 Diesel Fuels
SAE J1990 Recovery and Recycle Equipment for Mobile Automotive Air-Conditioning Systems
SAE J1855 Deployment of Electrically Activated Automotive Air Bags for Automobile Reclamation
SAE J1492 Measurement of Light Vehicle Stationary Exhaust System Sound Level Engine Speed Sweep Method
SAE J1470 Measurement of Noise Emitted By Accelerating Highway Vehicles
SAE J1169 Measurement of Light Vehicle Exhaust Sound Level Under Stationary Conditions (Cancelled Jul 2007)
SAE J845 Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
SAE J1605 Brake Master Cylinder Reservoir Diaphragm Gasket
SAE J1495 Test Procedure for Battery Flame Retardant Venting Systems
SAE J1369 Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions
SAE J579 Sealed Beam Headlamp Units for Motor Vehicles (Cancelled Mar 1992)
SAE J2177 Chassis Dynamometer Test Procedure-Heavy-Duty Road Vehicles
SAE J2038 Engine Weight, Dimensions, Center of Gravity, and Moment of Inertia
SAE J167 Overhead Protection for Agricultural Tractors-Test Procedures and Performance Requirements
SAE J617 Engine Flywheel Housing and Mating Transmission Housing Flanges
SAE J1397 Estimated Mechanical Properties and Machinability of Steel Bars
SAE J636 V-Belts and Pulleys
SAE J1784 Specifications and Standards for Marine Hydraulic Systems and Components
SAE J732 Specification Definitions-Loaders
SAE J941 Motor Vehicle Drivers' Eye Locations
SAE J592 Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width
SAE J575 Test Methods and Equipment for Lighting Devices and Components for Use on Vehicles Less Than 2032 Mm in Overall
SAE TSB002 Preparation of SAE Technical Reports
SAE TSB003 Rules for SAE Use of Si (Metric) Units
SAE TSB004 Technical Committee Guidelines
SAE J548/2 Spark Plug Installation Sockets
SAE J3000 Thermoplastic Elastomer Classification System
SAE J2246 Antilock Brake System Review
SAE J2236 Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers
SAE J2209 Cfc-12 (R-12) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems
SAE J2162 Spark Plug Heat Rating Classifications
SAE J2082 Cooling Flow Measurement Techniques
SAE J2051 Qualifications for Four-Way Subbase Mounted Air Valves for Automotive Manufacturing Applications
SAE J2041 Reflex Reflectors for Use on Vehicles 2032 Mm Or More in Overall Width
SAE J1094 Constant Volume Sampler System for Exhaust Emissions Measurement
SAE J2196 Service Hose for Automotive Air Conditioning
SAE J2197 Hfc-134a (R-134a) Service Hose Fittings for Automotive Air-Conditioning Service Equipment
SAE J964 Recommended Practice for Measuring Haze and Reflectance of Mirrors
SAE J515 Specification for O-ring Materials Used with Hydraulic Connectors
SAE J1610 Test Method for Evaluating the Sealing Capability of Hose connections with a PVT Test Facility
SAE J1280 Determination of Sulfur Compounds in Automotive Exhaust
SAE J2096 Categorization of Low Carbon Automotive Sheet Steel
SAE J1782 Ship Systems and Equipment-Hydraulic Systems-Noise Control
SAE J244 Measurement of Intake Air Or Exhaust Gas Flow of Diesel Engines
SAE J2100 Accelerated Environmental Testing for Bonded Automotive Assemblies
SAE J2059 All-Wheel-Drive Drivetrain Schematic Symbol Standards
SAE J2004 Internal Combustion Engines?Piston Rings Expander/Segment Oil Control Rings
SAE J2045 Performance Requirements for Fuel System Tubing Assemblies
SAE J808 Manual on Shot Peening (Cancelled Oct 1992, Superseded by HS-84)
SAE J830 Fuel Injection Equipment Nomenclature
SAE J1779 Ship Systems and Equipment-Hydraulic System Design Criteria for Marine Vehicles
SAE J2000 Internal Combustion Engines--Piston Rings--Keystone Rings
SAE J859 Numbering System for Designating Grades of Cast Ferrous materials *HS-30/2000*
SAE J1123 Leaf Springs for Motor Vehicle Suspension--Made to Metric Units
SAE J510 Leaf Springs for Motor Vehicle Suspension-Made to Customary U.S. Units
SAE J276 Steering Frame Lock for Articulated Loaders and Tractors
SAE J1250 In-Service Brake Performance Test Procedure--Vehicles Over 4500 Kg (10 000 Lb)
SAE J98 Personnel Protection for General Purpose Industrial Machines
SAE J410 High Strength, Low Alloy Steel (Cancelled Dec 1992, Superseded by J1442, J1392)
SAE J938 Drop Test for Evaluating Laminated Safety Glass for Use in Automotive Windshields (Cancelled Dec 1992)
SAE J1271 Technical Committee Guideposts (Cancelled Jan 1992, Superseded by TSB 004)
SAE J834 Passenger Car Rear Vision (Cancelled June 1994)
SAE J281 Cast Iron Sealing Rings (Cancelled Dec 1992, Superseded by J1236)
SAE J227 Electric Vehicle Test Procedure (Cancelled Dec 1992)
SAE J1924 Oem/VendorS Interface Specification for Vehicle Electronic Programming Station
SAE J1460 R Mar 85
SAE J1338 Open Field Whole-Vehicle Radiated Susceptibility 10 Khz--18 Ghz, Electric Field (Cancelled Jul 1995)
SAE J1130 Determination of Emissions From Gas Turbine Powered Light Duty Surface Vehicles (Cancelled Mar 1995)
SAE J1038 Recommendations for ChildrenS Snowmobile
SAE J312 Automotive Gasolines
SAE J1527 Marine Fuel Hoses
SAE J294 Service Brake Structural Integrity Test Procedure-Vehicles Over 4500 Kg (10 000 Lb) Gvwr
SAE J2084 Aerodynamic Testing of Road Vehicles--Testing Methods and Procedures
SAE J2034 Personal Water Craft Ventilation Systems
SAE J2046 Personal Watercraft Fuel Systems
SAE J2009 Discharge Forward Lighting System and Subsystems
SAE J1965 Road Vehicles--Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles--Fixing Nuts--Test Methods
SAE J1637 Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar
SAE J600 Headlamp Aim Testing Machines
SAE J380 Specific Gravity of Friction Material
SAE J2230 Accelerated Exposure of Automotive Interior Trim Material Using Outdoor Under-Glass Controlled Sun-Tracking Te
SAE J2229 Accelerated Exposure of Automotive Interior Trim Materials Using An Outdoor Under Glass Variable Angled Contro
SAE J1986 Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations
SAE J1881 Initial Graphics Exchange Specification
SAE J1814 Operator Controls--Off-Road Machines
SAE J1636 Recommended Guidelines for Load/Deformation Testing of Elastomeric Components
SAE J1643 Diesel Catalytic Converter Nomenclature and Terminology
SAE J1642 Medium- and Heavy-Duty Truck Converter/Muffler Configuration
SAE J1926/1 Connections for General Use and Fluid Power-Ports and Stud Ends With Iso 725 Threads and O-Ring Sealing-Part
SAE J368 High-Strength, Quenched, and Tempered Structural Steels (Cancelled Mar 1993, Superseded by ASTM A 514)
SAE J2212 Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Air-Cooled Xenon-Arc
SAE J1926/3 Connections for General Use and Fluid Power-Ports and Stud Ends With Iso 725 Threads and O-Ring Sealing-Part
SAE J1375 Starter Motor Application Considerations
SAE J1313 Automotive Synchronous Belt Drives
SAE J587 License Plate Illumination Devices (Rear Registration Plate Illumination Devices)
SAE J1606 Headlamp Design Guidelines for Mature Drivers (STABILIZED Feb 2011)
SAE J654 Static and Reciprocating Elastomeric Transmission Seals
SAE J1278 Si (Metric) Synchronous Belts and Pulleys
SAE J590 Turn Signal Flashers
SAE J1928 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
SAE J915 Automatic Transmissions-Manual Control Sequence
SAE J631 Radiator Nomenclature
SAE J373 Housing Internal Dimensions for Single- and Two-Plate Spring-Loaded Clutches
SAE J2708 Agricultural Tractor Test Code (Oecd)
SAE J2114 Dolly Rollover Recommended Test Procedure
SAE J2056/2 Survey of Known Protocols
SAE J1805 Sound Power Level Measurements of Work Machines - Static and In-Place Dynamic Methods
SAE J1033 Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings and Flywheel Housing Adapters
SAE J1036 Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
SAE J673 Automotive Safety Glasses
SAE J1506 Emission Test Driving Schedules
SAE J444 Cast Shot and Grit Size Specifications for Peening and Cleaning
SAE J864 Surface Hardness Testing With Files
SAE J620 Flywheels for Industrial Engines Used With Industrial Power Take-Offs Equipped With Driving-Ring Type Overcente
SAE J572 Requirements for Sealed Lighting Unit for Construction and Industrial Machines
SAE J421 Cleanliness Rating of Steels By the Magnetic Particle Method
SAE J371 Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines
SAE J227A Electric Vehicle Test Procedure (Cancelled May 1993)
SAE J1670 Type "F" Clamps for Plumbing Applications
SAE J1666 Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure
SAE J1638 Compression Set of Hoses Or Solid Discs
SAE J1644 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Conn
SAE J1468 Application Testing of Oil-To-Air Oil Coolers for Heat Transfer Performance
SAE J1172 Engine Flywheel Housings With Sealed Flanges
SAE J1355 Test Method for Measuring Thickness of Resilient Insulating Paddings
SAE J518 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
SAE J2178/2 Class B Data Communication Network Messages - Part 2: Data Parameter Definitions
SAE J1351 Hot Odor Test for Insulation Materials
SAE J1223 Marine Carburetors and Fuel Injection Throttle Bodies
SAE J726 Air Cleaner Test Code
SAE J1231 Formed Tube Ends for Hose Connections and Hose Fittings
SAE J560 Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable
SAE J441 Cut Wire Shot
SAE J1287 Measurement of Exhaust Sound Levels of Stationary Motorcycles
SAE J240 Life Test for Automotive Storage Batteries
SAE J583 Front Fog Lamps
SAE J974 Flashing Warning Lamp for Agricultural Equipment
SAE J945 Vehicular Hazard Warning Signal Flashers
SAE J943 Slow-Moving Vehicle Identification Emblem
SAE J957 Capacity Rating--Elevating Scrapers
SAE J741 Capacity Rating-Scraper, Open Bowl
SAE J532 Automotive Straight Thread Filler and Drain Plugs
SAE J283 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped With Three-Point Hitch
SAE J296 Excavator, Mini-Excavator, and Backhoe Hoe Bucket Volumetric Rating
SAE J2190 Enhanced E/E Diagnostic Test Modes
SAE J2201 Universal Interface for Obd Ii Scan
SAE J2208 Park Standard for Automatic Transmissions
SAE J2116 Two-Stroke-Cycle Gasoline Engine Lubricants Performance and Service Classification
SAE J2056/1 Class C Application Requirement Considerations
SAE J1974 Decorative Anodizing Specification for Automotive Applications
SAE J1957 Central High Mounted Stop Lamp Standard for Vehicles Less Than 2032 Mm Overall Width
SAE J1611 Operator Controls - (Horizontal Earthboring Machines)
SAE J1629 Cautionary Statements for Handling HFC-134a During Mobile Air Conditioning Service
SAE J1382 Classification, Nomenclature, and Specification Definitions for Trenching Machines
SAE J1253 Low-Temperature Cranking Load Requirements of An Engine
SAE J1319 Fog Tail Lamp (Rear Fog Light) Systems
SAE J1118 Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
SAE J1012 Operator Enclosure Pressurization System Test Procedure
SAE J1042 Operator Protection for General-Purpose Industrial Machines
SAE J3000 Thermoplastic Elastomer Classification System (Cancelled Oct 2009, Superseded by J2558)
SAE J225 Brake Force Distribution Field Test Procedure for Truck and Bus
SAE J891 Spring Nuts
SAE J1109 Component Nomenclature-Articulated Log Skidder, Rubber-Tired
SAE J1110 Specification Definitions-Articulated Rubber-Tired Log Skidder
SAE J310 Automotive Lubricating Greases
SAE J775 Engine Poppet Valve Information Report
SAE J994 Alarm--Backup--Electric Laboratory Performance Testing
SAE J1692 Valve Seat Insert Information Report
SAE J1092 Nomenclature--Industrial Tractors (General Purpose Wheel)
SAE J483 High and Low Crown (Blind, Acorn) Hex Nuts
SAE J1868 Restricted Hardenability Bands for Selected Alloy Steels
SAE J2178/3 Class B Data Communication Network Messages--Part 3 Frame Ids for Single-Byte Forms of Headers
SAE J2179 A Test for Evaluating the Rearward Amplication of Multi-Articulated Vehicles
SAE J874 Earthmoving Machines--Method for Locating the Center of Gravity
SAE J229 Service Brake Structural Integrity Test Procedure-Passenger Car
SAE J135 Service Brake System Performance Requirements--Passenger Car--Trailer Combinations
SAE J134 Brake System Road Test Code--Passenger Car and Light Duty Truck-Trailer Combinations
SAE J1247 Simulated Mountain-Brake Performance Test Procedure
SAE J1051 Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
SAE J299 Stopping Distance Test Procedure
SAE J254 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
SAE J1682 Valve Guide Information Report
SAE J584 Motorcycle Headlamps
SAE J1889 L.E.D. Signal and Marking Lighting Devices
SAE J46 Wheel-Slip Brake-Control System Road Test Code
SAE J1953 Brake-Stroke Indicator Design Guideline for Cam Or Disc Air-Brake Actuators
SAE J1985 Fuel Filters--Initial Single-Pass Efficiency Test Method
SAE J1230 Minimum Requirements for Wheel-Slip Brake-Control System Malfunction Signals
SAE J1563 Guidelines for Laboratory Cyclic Corrosion Test Procedures for Painted Automotive Parts
SAE J1708 Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications
SAE J1892 Recommended Practice for Bar-Coded Vehicle Emission Configuration Label
SAE J1523 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
SAE J2222 Coiled Electrical Cable
SAE J1863 Coach Joint Fracture Test
SAE J1617 Body Corrosion-A Comprehensive Introduction
SAE J1442 High-Strength, Hot-Rolled Steel Bars
SAE J402 New Steel Designation System for Wrought or Rolled Steel
SAE J539 Voltages for Diesel Electrical Systems
SAE J619 Flywheels for Two-Plate Spring-Loaded Clutches
SAE J1783 Selection of Hydraulic Directional Control Valves
SAE J846 Coding Systems for Identification of Fluid Conductors and Connectors *HS-150/2000*
SAE J883 Test Method for Determining Dimensional Stability of Automotive Textile Materials
SAE J855 Test Method of Stretch and Set of Textiles and Plastics
SAE J815 Load Deflection Testing of Urethane Foams for Automotive Seating
SAE J823 Flasher Test
SAE J369 Flammability of Polymeric Interior Materials-Horizontal Test Method
SAE J2019 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Appar
SAE J861 Method of Testing Resistance to Crocking of Organic Trim Materials
SAE J2223/3 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 3: Multipole Connectors--Flat Blade
SAE J2223/1 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 1: Single-Pole Connectors--Flat Blad
SAE J1616 Recommended Practice for Compressed Natural Gas Vehicle Fuel
SAE J1645 Fuel System-Electrostatic Charge
SAE J2223/2 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Req
SAE J311 Fluid for Passenger Car Type Automatic Transmissions
SAE J2066 Filter and Filter Element for Hydraulic System(S) Used on Manufacturing and Assembly Equipment
SAE J1651 Metric Yoke Type Rod Ends
SAE J1623 All-Terrain Vehicle Headlamps
SAE J1325 Test Method for Measuring the Relative Drapeability of Flexible Insulation Materials
SAE J1143 Towed Vehicle/Tow Equipment Attachment Test Procedure-Passenger Cars, Vans, and Light Duty Trucks
SAE J1142 Towability Design Criteria and Equipment Use-Passenger Cars, Vans, and Light-Duty Trucks
SAE J1111 Component Nomenclature-Skidder-Grapple
SAE J1112 Specification Definitions-Skidder-Grapple
SAE J1093 Latticed Crane Boom Systems--Analytical Procedure
SAE J1702 Self-Propelled Sweepers Sweep-Ability Performance
SAE J551/2 Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spar
SAE J551/13 Vehicle Electromagnetic Immunity--Bulk Current Injection
SAE J123 Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compresssions Systems
SAE J987 Lattice Boom Cranes-Method of Test
SAE J232 Industrial Rotary Mowers
SAE J375 Radius-Of-Load Or Boom Angle Indicating Systems
SAE J1715 Electric Vehicle Terminology
SAE J159 Rated Capacity System
SAE J1260 Standard Oil Filter Test Oil
SAE J1696 Standard Fuel Filter Test Fluid
SAE J1497 Design Guide for Formed-In-Place Gaskets
SAE J1679 Peel Strength of Soft Trim Adhesives
SAE J1700 Softening Point of Interior Trim Adhesives
SAE J1598 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
SAE J2043 Nonmetallic Fuel System Tubing
SAE J1513 External Automatic Slack Adjuster Performance Requirements
SAE J1146 The Automotive Lubricant Performance and Service Classification Maintenance Procedure (Cancelled May 1994)
SAE J1040 Performance Criteria for Rollover Protective Structures (Rops) for Construction, Earthmoving, Forestry, and Mi
SAE J314 Felts-Wool and Part Wool
SAE J20 Coolant System Hoses
SAE J328 Wheels-Passenger Cars and Light Truck Performance Requirements and Test Procedures
SAE J178 Music Steel Spring Wire and Springs
SAE J1045 Instrumentation and Techniques for Vehicle Refueling Emissions Measurement
SAE J316 Oil-Tempered Carbon-Steel Spring Wire and Springs
SAE J800 Motor Vehicle Seat Belt Assembly Installation
SAE J821 Electrical Wiring Systems for Construction, Agricultural and Off-Road Machines
SAE J598 Sealed Lighting Units for Construction, Industrial and Forest Machinery
SAE J351 Oil-Tempered Carbon-Steel Valve Spring Quality Wire and Springs
SAE J382 Windshield Defrosting Systems Performance Guidelines--Trucks, Buses, and Multi-Purpose Vehicles
SAE J339 Seat Belt Hardware Webbing Abrasion Test Procedure
SAE J271 Special Quality High-Tensile, Hard-Drawn Mechanical Spring Wire and Springs
SAE J230 Stainless Steel, SAE 30302, Spring Wire and Springs
SAE J2071 Aerodynamic Testing of Road Vehicles--Open Throat Wind Tunnel Adjustment
SAE J2053 Brake Master Cylinder Plastic Reservoir Assembly for Road Vehicles
SAE J2027 Standard for Protective Covers for Gasoline Fuel Line Tubing
SAE J1981 Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)
SAE J1978 Obd Ii Scan Tool-Equivalent to Iso/Dis 15031-4:December 14, 2001
SAE J1744 280 Relay Footprint
SAE J1693 Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes-General Characteristics and Test Procedure
SAE J156 Fusible Links
SAE J157 Oil-Tempered Chromium--Silicon Alloy Steel Wire and Springs
SAE J1401 Road Vehicle-Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids
SAE J132 Oil-Tempered Chromium-Vanadium Valve Spring Quality Wire and Springs
SAE J1352 Compression and Recovery of Insulation Paddings
SAE J114 Seat Belt Hardware Webbing Abrasion Performance Requirements
SAE J113 Hard-Drawn Mechanical Spring Wire and Springs
SAE J1650 Seamless Copper-Nickel 90-10 Tubing
SAE J384 Motor Vehicle Seat Belt Anchorages-Test Procedure
SAE J1717 Interior Automotive Plastic Part Testing
SAE J1694 Remanufactured Hydraulic Master Cylinder for Motor Vehicle Brakes-Performance Requirements
SAE J1739 Potential Failure Mode and Effects Analysis in Design (Design Fmea), Potential Failure Mode and Effects Analys
SAE J516 Hydraulic Hose Fittings
SAE J1939/21 Data Link Layer
SAE J217 Stainless Steel 17-7 Ph Spring Wire and Springs
SAE J1877 Recommended Practice for Bar-Coded Vehicle Identification Number Label
SAE J1050 Describing and Measuring the DriverS Field of View
SAE J1988 Residual Aligning Moment Test
SAE J365 Method of Testing Resistance to Scuffing of Trim Materials
SAE J297 Operator Controls on Industrial Equipment
SAE J948 Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snaggin
SAE J1361 Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials
SAE J986 Sound Level for Passenger Cars and Light Trucks
SAE J882 Test Method for Measuring Thickness of Automotive Textiles and Plastics
SAE J912 Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
SAE J172 Hard Drawn Carbon Steel Valve Spring Quality Wire and Springs (Cancelled Aug 1994)
SAE J1530 Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding Automotive Carpet Ma
SAE J1621 Engine Retarder Dynamometer Test and Capability Rating Procedure
SAE J1423 Classification of Energy Conserving Engine Oil for Passenger Cars, Vans, Sport Utility Vehicles, and Light-Dut
SAE J1301 Truck Deformation Classification
SAE J1209 Identification Terminology of Mobile Forestry Machines
SAE J1054 Warning Lamp Alternating Flashers
SAE J363 Filter-Base Mounting
SAE J1842 Disc Wheel Hub/Spoke Wheel and Axle Interfgace Dimensions-Commercial Vehicles
SAE J1272 Felling Head Terminology and Nomenclature
SAE J1113/21 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electrom
SAE J898 Control Locations for Off-Road Work Machines
SAE J940 Glossary of Carbon Steel Sheet and Strip Terms
SAE J2219 Mobile Air Conditioning Industry Criteria and Guidelines
SAE J2224 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging
SAE J3046/1 Reciprocating Internal Combustion Engines--Performance--Part 1: Standard Reference Conditions, Declarations
SAE J2030 Heavy-Duty Electrical Connector Performance Standard
SAE J1689 Hydraulic Power Units Used on Machine Tools and Equipment for the Automotive Industry
SAE J128 Occupant Restraint System Evaluation--Passenger Cars and Light-Duty Trucks
SAE J588 Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 Mm in Overall Width
SAE J594 Reflex Reflectors
SAE J592 Sidemarker Lamps for Use on Road Vehicles Less Than 2032 Mm in Overall Width
SAE J1733 Sign Convention for Vehicle Crash Testing
SAE J1939/11 Physical Layer, 250k Bits/S, Twisted Shielded Pair
SAE J1939/31 Network Layer
SAE J1756 Test Procedure to Determine the Fogging Characteristics of Interior Automotive Materials
SAE J585 Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 Mm in Overall Width
SAE J222 Parking Lamps (Front Position Lamps)
SAE J2068 Combination Turn Signal Hazard Warning Signal Flashers
SAE J1747 Recommended Methods for Conducting Corrosion Tests in Gasoline/Methanol Fuel Mixtures
SAE J1669 Passenger Compartment Air Filter Test Code
SAE J1718 Measurement of Hydrogen Gas Emission from Battery-Powered Passenger Cars and Light Trucks During Battery Charg
SAE J1594 Vehicle Aerodynamics Terminology
SAE J1178 Machinery for Forestry--Wheeled Special Machines--Vocabulary, Performance Test Methods, and Criteria for Brake
SAE J2178/1 Class B Data Communication Network Messages-Detailed Header Formats and Physical Address Assignments
SAE J759 Lighting Identification Code
SAE J1703 Motor Vehicle Brake Fluid
SAE J442 Test Strip, Holder, and Gage for Shot Peening
SAE J1937 Engine Testing With Low-Temperature Charge Air-Cooler Systems in a Dynamometer Test Cell
SAE J1773 SAE Electric Vehicle Inductively Coupling Charging
SAE J1454 Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
SAE J1962 Diagnostic Connector Equivalent to Iso/Dis 15031-3:December 14, 2001
SAE J581 Auxiliary Upper Beam Lamps
SAE J914 Side Turn Signal Lamps for Vehicles Less Than 12 M in Length
SAE J1735 Harmonized Vehicle Headlamp Performance Requirements
SAE J1767 Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials
SAE J1755 Guidelines for Usage of Stainless Steel and Bimetal for Exterior Automotive Bright Trim
SAE J1811 Power Cable Terminals
SAE J1604 Rubber Boots for Drum-Type Hydraulic Brake Wheel Cylinders
SAE J1603 Rubber Seals for Hydraulic Disc Brake Cylinders
SAE J115 Safety Signs
SAE J1113/13 Electromagnetic Compatibility Measurement Procedure for Vehicle Components--Part 13--Immunity to Electrosta
SAE J593 Backup Lamp (Reversing Lamp)
SAE J2178/4 Class B Data Communication Network Messages-Message Definitions for Three Byte Headers
SAE J406 Methods of Determining Hardenability of Steels
SAE J409 Product Analysis-Permissible Variations From Specified Chemical Analysis of a Heat Or Cast of Steel
SAE J873 Drag Force Test Procedure for Construction, Forestry, and Industrial Machines
SAE J924 Thrust Washers-Design and Application
SAE J835 Split Type Bushings-Design and Application
SAE J255 Diesel Engine Smoke Measurement
SAE J1532 Transmission Oil Cooler Hose
SAE J1102 Mechanical and Material Requirements for Wheel Bolts
SAE J1113/22 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Part 22-Immunity to Radiated Mag
SAE J1113/27 Electromagnetic Compatibility Measurements Procedure for Vehicle Components-- Part 27--Immunity to Radiated
SAE J506 Sleeve Type Half Bearings
SAE J1826 Turbocharger Gas Stand Test Code
SAE J211/1 Instrumentation for Impact Test-Part 1-Electronic Instrumentation
SAE J1647 Plastic Materials and Coatings for Use in Or on Optical Parts Such as Lenses and Reflectors of High-Intensity
SAE J1752/3 Measurement of Radiated Emissions From Integrated Circuits-Tem/Wideband Tem (Gtem) Cell Method; Tem Cell (1
SAE J304 Engine Oil Tests
SAE J973 Ignition System Measurements Procedure
SAE J900 Crankcase Emission Control Test Code
SAE J90 Standard Classification System for Nonmetallic Automotive Gasket Materials
SAE J927 Flywheels for Engine-Mounted Torque Converters
SAE J621 Industrial Power Take-Offs With Driving Ring-Type Overcenter Clutches
SAE J582 Auxiliary Low Beam Lamps
SAE J35 Diesel Smoke Measurement Procedure
SAE J385 Motor Vehicle Seat Belt Anchorages-Performance Requirements
SAE J215 Continuous Hydrocarbon Analysis of Diesel Emissions
SAE J2032 Ignition Cable Assemblies
SAE J1750 Describing and Evaluating the Truck DriverS Viewing Environment
SAE J1752/2 Measurement of Radiated Emissions From Integrated Circuits-Surface Scan Method (Loop Probe Method) 10 Mhz to
SAE J1491 Vehicle Acceleration Measurement
SAE J1095 Spoke Wheels and Hub Fatigue Test Procedures
SAE J1079 Overcenter Clutch Spin Test Procedure
SAE J500 Serrated Shaft Ends
SAE J1113/4 Immunity to radiated electric fields--Bulk Current Injection (BCI) Method
SAE J88 Sound Measurement--Off-Road Work Machines--Exterior (Cancelled Apr 1995)
SAE J2264 Chassis Dynamometer Simulation of Road Load Using Coastdown Techniques
SAE J228 Airflow Reference Standards
SAE J2121 Requirements for Composite Lighting Assemblies Used on Construction and Industrial Machinery
SAE J1854 Brake Force Distribution Performance Guide-Truck and Bus
SAE J1652 Dynamometer Effectiveness Characterization Test for Passenger Car and Light Truck Caliper Disc Brake Friction
SAE J1553 Cross Peel Test for Automotive-Type Adhesives for Fiber Reinforced Plastic (Frp) Bonding
SAE J1505 Brake Force Distribution Test Procedure-Trucks and Buses
SAE J1353 Nomenclature-Clam Bunk Skidder
SAE J1100 Motor Vehicle Dimensions
SAE J1796 Spectral Transmission Test
SAE J1942 Hose and Hose Assemblies for Marine Applications
SAE J1268 Hardenability Bands for Carbon and Alloy H Steels
SAE J64 Vehicle Identification Numbers--Snowmobiles
SAE J551/15 Vehicle Electromagnetic Immunity--Electrostatic Discharge (Esd)
SAE J530 Automotive Pipe Fittings
SAE J531 Automotive Pipe, Filler, and Drain Plugs
SAE J45 Brake System Test Procedure-Snowmobiles
SAE J292 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
SAE J277 Maintenance of Design Voltage-Snowmobile Electrical Systems
SAE J278 Snowmobile Stop Lamp
SAE J279 Snowmobile Tail Lamp (Rear Position Lamp)
SAE J2020 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent Uv and Condensation Apparatus
SAE J1765 SAE Miniature Bulb Vibration Test
SAE J1685 Classification System for Automotive Acrylonitrile/Butadiene/Styrene (Abs) and ABS + Polycarbonate Blends (Abs
SAE J1705 Low Water Tolerant Brake Fluids
SAE J1639 Classification System for Automotive Polyamide (Pa) Plastics
SAE J1345 Automotive Plastic Parts Specification (Cancelled May 1995, Superseded by J1717)
SAE J1282 Snowmobile Brake Control Systems
SAE J1222 Speed Control Assurance for Snowmobiles
SAE J1236 Cast Iron Sealing Rings (Metric)
SAE J1062 Snowmobile Passenger Handgrips
SAE J922 Turbocharger Nomenclature and Terminology
SAE J1349 Engine Power Test Code-Spark Ignition and Compression Ignition-Net Power Rating
SAE J1082 Fuel Economy Measurement Road Test Procedure
SAE J578 Color Specification
SAE J1995 Engine Power Test Code-Spark Ignition and Compression Ignition- Gross Power Rating
SAE J1706 Production, Handling and Dispensing of SAE J1703 Motor Vehicle Brake Fluids
SAE J1488 Emulsified Water/Fuel Separation Test Procedure
SAE J1634 Electric Vehicle Energy Consumption and Range Test Procedure
SAE J1312 Procedure for Mapping Engine Performance-Spark Ignition and Compression Ignition Engines
SAE J604 Engine Terminology and Nomenclature-General
SAE J1344 Marking of Plastic Parts
SAE J551/5 Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength From Electric Vehicles,
SAE J985 Vision Factors Considerations in Rear View Mirror Design
SAE J968/2 Diesel Injection Pump Testing--Part 2: Orifice Plate Flow Measurement
SAE J968/1 Diesel Injection Pump Testing-Part 1: Calibrating Nozzle and Holder Assemblies
SAE J824 Engine Rotation and Cylinder Numbering
SAE J647 Automatic Transmissions - Schematic Diagrams
SAE J635 Fan Hub Bolt Circles and Pilot Holes
SAE J614 Engine and Transmission Dipstick Marking
SAE J383 Motor Vehicle Seat Belt Anchorages--Design Recommendations
SAE J335 Multiposition Small Engine Exhaust System Fire Ignition Suppression
SAE J2265 Diesel Engines-Diesel Fuel-Performance Requirement and Test Method for Assessing Fuel Lubricity
SAE J1958 Diesel Engines--Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
SAE J1839 Coarse Droplet Water/Fuel Separation Test Procedure
SAE J177 Measurement of Carbon Dioxide, Carbon Monoxide, and Oxides of Nitrogen in Diesel Exhaust
SAE J1541 Fuel Injection Nomenclature - Spark Ignition Engines (Cancelled Jan 2007)
SAE J1515 Impact of Alternative Fuels on Engine Test and Reporting Procedures
SAE J1474 Heavy-Duty Nonmetallic Engine Cooling Fans-Material, Manufacturing and Test Considerations
SAE J141 Seat Belt Hardware Performance Requirements
SAE J140 Seat Belt Hardware Test Procedure
SAE J1339 Test Method for Measuring Power Consumption of Engine Cooling Fans
SAE J139 Ignition System Nomenclature and Terminology
SAE J1256 Fuel Economy Measurement-Road Test Procedure-Cold Start and Warm-Up Fuel Economy
SAE J1244 Oil Cooler Nomenclature and Glossary
SAE J1243 Diesel Emission Production Audit Test Procedure
SAE J120 Rubber Rings for Automotive Applications
GB/T 14615-2006 小麦粉 面团的物理特性 流变学特性的测定 拉伸仪法--国家标准全文数据库
GB 1355-1986 小麦粉--国家标准全文数据库
GB 8934-1988 粮食、油料及其加工产品性质和质量的名词术语--国家标准全文数据库
GB/T 8610-1988 淀粉业用甘薯片--国家标准全文数据库
GB/T 8609-1988 发酵业用甘薯片--国家标准全文数据库
GB/T 22427.3-2008 淀粉总脂肪测定--国家标准全文数据库
GB/T 22427.11-2008 淀粉及其衍生物磷总含量测定--国家标准全文数据库
GB/T 22427.8-2008 淀粉及其衍生物硫酸化灰分测定--国家标准全文数据库
GB/T 22427.10-2008 淀粉及其衍生物氮含量测定--国家标准全文数据库
GB/T 22427.12-2008 淀粉及其衍生物氯化物含量测定--国家标准全文数据库
GB/T 22427.6-2008 淀粉白度测定--国家标准全文数据库
GB/T 22427.7-2008 淀粉粘度测定--国家标准全文数据库
GB/T 22427.4-2008 淀粉斑点测定--国家标准全文数据库
GB/T 12087-2008 淀粉水分测定 烘箱法--国家标准全文数据库
GB/T 22427.5-2008 淀粉细度测定--国家标准全文数据库
GB/T 22427.1-2008 淀粉灰分测定--国家标准全文数据库
GB/T 22428.2-2008 淀粉水解产品含水量测定--国家标准全文数据库
GB/T 22428.1-2008 淀粉水解产品 还原力和葡萄糖当量测定--国家标准全文数据库
GB/T 20379-2006 淀粉衍生物 葡萄糖浆、果糖浆和氢化葡萄糖浆成分的测定 高效液相色谱法--国家标准全文数据库
GB/T 20380.4-2006 淀粉及其制品 重金属含量 第4部分:电热原子吸收光谱法测定镉含量--国家标准全文数据库
GB/T 20380.3-2006 淀粉及其制品 重金属含量 第3部分:电热原子吸收光谱法测定铅含量--国家标准全文数据库
GB/T 20380.2-2006 淀粉及其制品 重金属含量 第2部分:原子吸收光谱法测定汞含量--国家标准全文数据库
GB/T 20380.1-2006 淀粉及其制品 重金属含量 第1部分:原子吸收光谱法测定砷含量--国家标准全文数据库
GB/T 22427.13-2008 淀粉及其衍生物二氧化硫含量的测定--国家标准全文数据库
GB/T 22427.9-2008 淀粉及其衍生物酸度测定--国家标准全文数据库
GB/T 8612-1988 豆制食品业用大豆--国家标准全文数据库
GB/T 8611-1988 油脂业用大豆--国家标准全文数据库
GB/T 20371-2006 食品工业用大豆蛋白--国家标准全文数据库
GB/T 15682-1995 稻米蒸煮试验品质评定--国家标准全文数据库
GB 1354-1986 大米--国家标准全文数据库
GB/T 8886-1988 淀粉原料--国家标准全文数据库
GB/T 19852-2008 地理标志产品 卢龙粉丝--国家标准全文数据库
GB/T 19048-2008 地理标志产品 龙口粉丝--国家标准全文数据库
GB 19852-2005 原产地域产品 卢龙粉丝--国家标准全文数据库
GB 19048-2003 原产地域产品 龙口粉丝--国家标准全文数据库
GB/T 8884-2007 马铃薯淀粉--国家标准全文数据库
GB/T 22106-2008 非发酵豆制品--国家标准全文数据库
GB/T 20378-2006 原淀粉 淀粉含量的测定 旋光法--国家标准全文数据库
GB/T 20376-2006 变性淀粉中羟丙基含量的测定 质子核磁共振波谱法--国家标准全文数据库
GB/T 20375-2006 变性淀粉 羧甲基淀粉中羧甲基含量的测定--国家标准全文数据库
GB/T 20374-2006 变性淀粉 氧化淀粉羧基含量的测定--国家标准全文数据库
GB/T 20377-2006 变性淀粉 乙酰化二淀粉己二酸酯中己二酸含量的测定 气相色谱法--国家标准全文数据库
GB/T 20373-2006 变性淀粉中乙酰基含量的测定 酶法--国家标准全文数据库
GB/T 8622-1988 大豆制品中尿素酶活性测定方法--国家标准全文数据库
GB/T 8613-1999 淀粉发酵工业用玉米--国家标准全文数据库
GB/T 21494-2008 低温食用豆粕--国家标准全文数据库
GB/T 8608-1988 低筋小麦粉--国家标准全文数据库
GB/T 18104-2000 魔芋精粉--国家标准全文数据库
GB/T 18738-2006 速溶豆粉和豆奶粉--国家标准全文数据库
GB/T 12309-1990 工业玉米淀粉--国家标准全文数据库
GB/T 18738-2002 高蛋白速溶豆粉--国家标准全文数据库
GB/T 8607-1988 高筋小麦粉--国家标准全文数据库
GB/T 22428.4-2008 葡萄糖浆干物质测定--国家标准全文数据库
GB/T 21122-2007 营养强化小麦粉--国家标准全文数据库
GB/T 8883-2008 食用小麦淀粉--国家标准全文数据库
GB/T 8883-1988 食用小麦淀粉--国家标准全文数据库
GB/T 8884-1988 食用马铃薯淀粉--国家标准全文数据库
GB/T 8885-2008 食用玉米淀粉--国家标准全文数据库
GB/T 8885-1988 食用玉米淀粉--国家标准全文数据库
GB/T 22428.3-2008 葡萄糖干燥失重测定--国家标准全文数据库
GB/T 10463-1989 玉米粉--国家标准全文数据库
GB/T 8887-1988 淀粉分类--国家标准全文数据库
GB/T 21118-2007 小麦粉馒头--国家标准全文数据库
GB/T 21305-2007 谷物及谷物制品水分的测定 常规法--国家标准全文数据库
GB/T 12104-1989 淀粉(包括衍生物和副产品)术语--国家标准全文数据库
GB 8869-1988 粮食、油料及其加工产品的名词术语--国家标准全文数据库
GB/T 5410-2008 乳粉(奶粉)--国家标准全文数据库
GB/T 18105-2000 米类加工精度异色相差分染色检验法(IDS法)--国家标准全文数据库
GB/T 5520-1985 粮食、油料检验 种子发芽试验--国家标准全文数据库
GB 5491-1985 粮食、油料检验 扦样、分样法--国家标准全文数据库
GB/T 5501-1985 粮食、油料检验 鲜薯检验法--国家标准全文数据库
GB/T 5492-1985 粮食、油料检验 色泽、气味、口味鉴定法--国家标准全文数据库
GB/T 5496-1985 粮食、油料检验 黄粒米及裂纹粒检验法--国家标准全文数据库
GB/T 5516-1985 粮食、油料检验 粮食粘度测定法--国家标准全文数据库
GB/T 5493-1985 粮食、油料检验 类型及互混检验法--国家标准全文数据库
GB/T 5495-1985 粮食、油料检验 稻谷出糙率检验法--国家标准全文数据库
GB/T 5498-1985 粮食、油料检验 容重测定法--国家标准全文数据库
GB/T 5514-1985 粮食、油料检验 淀粉测定法--国家标准全文数据库
GB/T 5518-1985 粮食、油料检验 粮食比重测定法--国家标准全文数据库
GB/T 5508-1985 粮食、油料检验 粉类含砂量测定法--国家标准全文数据库
GB/T 5513-1985 粮食、油料检验 还原糖和非还原糖测定法--国家标准全文数据库
GB/T 5500-1985 粮食、油料检验 甘薯片纯质率检验法--国家标准全文数据库
GB/T 5499-1985 粮食、油料检验 带壳油料纯仁率检验法--国家标准全文数据库
GB/T 5502-1985 粮食、油料检验 米类加工精度检验法--国家标准全文数据库
GB/T 5504-1985 粮食、油料检验 小麦粉加工精度检验法--国家标准全文数据库
GB/T 5497-1985 粮食、油料检验 水分测定法--国家标准全文数据库
GB/T 5509-1985 粮食、油料检验 粉类磁性金属物测定法--国家标准全文数据库
GB/T 5523-1985 粮食、油料检验 脂肪酶活动度测定法--国家标准全文数据库
GB/T 5522-1985 粮食、油料检验 过氧化氢酶活动度测定法--国家标准全文数据库
GB/T 5515-1985 粮食、油料检验 粗纤维素测定法--国家标准全文数据库
GB/T 5506-1985 粮食、油料检验 面筋测定法--国家标准全文数据库
GB/T 5494-1985 粮食、油料检验 杂质、不完善粒检验法--国家标准全文数据库
GB/T 5507-1985 粮食、油料检验 粉类粗细度测定法--国家标准全文数据库
GB/T 5510-1985 粮食、油料检验 脂肪酸值测定法--国家标准全文数据库
GB/T 5511-1985 粮食、油料检验 粗蛋白质测定法--国家标准全文数据库
GB/T 5512-1985 粮食、油料检验 粗脂肪测定法--国家标准全文数据库
GB/T 5503-1985 粮食、油料检验 碎米检验法--国家标准全文数据库
GB/T 5505-1985 粮食、油料检验 灰分测定法--国家标准全文数据库
GB/T 5517-1985 粮食、油料检验 粮食酸度测定法--国家标准全文数据库
GB/T 5515-2008 粮油检验 粮食中粗纤维素含量测定 介质过滤法--国家标准全文数据库
GB/T 5512-2008 粮油检验 粮食中粗脂肪含量测定--国家标准全文数据库
GB/T 20264-2006 粮食、油料水分两次烘干测定法--国家标准全文数据库
GB/T 20940-2007 肉类制品企业良好操作规范--国家标准全文数据库
GB/T 20941-2007 水产食品加工企业良好操作规范--国家标准全文数据库
GB/T 20938-2007 罐头食品企业良好操作规范--国家标准全文数据库
GB/T 20942-2007 啤酒企业良好操作规范--国家标准全文数据库
GB/T 5490-1985 粮食、油料及植物油脂检验 一般规则--国家标准全文数据库
GB/T 21926-2008 辐照含脂食品中2-十二烷基环丁酮测定 气相色谱/质谱法--国家标准全文数据库
GB/T 5511-2008 谷物和豆类 氮含量测定和粗蛋白质含量计算 凯氏法--国家标准全文数据库
GB/T 13607-1992 苹果、柑桔包装--国家标准全文数据库
GB 13432-1992 特殊营养食品标签--国家标准全文数据库
GB 13432-2004 预包装特殊膳食用食品标签通则--国家标准全文数据库
GB/T 20799-2006 鲜、冻肉运输条件--国家标准全文数据库
总计406626个记录,共407页。 第一页 上一页 下一页 最末页