当前位置: 网站地图

所有标准资料

ANSI/ASTM D3228-2008 使用改良的凯氏(测定氮)法测定润滑油和燃油中总氮量的试验方法
ANSI/ASTM D187-2008 煤油燃烧质量用试验方法
ANSI/ASTM D396a-2008 燃料油规范
ANSI/ASTM D1552-2008 石油产品中硫的试验方法(高温法)
ANSI/ASTM D5949-2008 石油产品倾点用试验方法(自动压力脉冲法)
ANSI/ASTM D6186-2008 使用压力差示扫描量热法(PDSC)测定润滑油氧化诱导时间的试验方法
ANSI/ASTM D4950-2008 汽车设备用油脂的分类和规范
ANSI/ASTM D7397-2008 石油产品始凝点的试验方法(小型光学法)
ANSI/ASTM D5969-2008 在含稀释合成海水环境下润滑脂防腐性能用试验方法
ANSI/ASTM D4684-2008 低温下发动机油屈服应力和表观粘度测定用试验方法
ANSI/ASTM D1405-2008 航空燃料消耗的净热量评估用试验方法
ANSI/ASTM D7344-2008 大气压力下石油产品的蒸馏用试验方法(小型法)
ANSI/ASTM D6984a-2008 序列Iiif火花点火式发动机中汽车发动机油的评估用试验方法
ANSI/ASTM D7038a-2008 汽车齿轮润滑油耐潮湿腐蚀性的评估用试验方法
ANSI/ASTM D7320a-2008 序列IIIG火花点火发动机中汽车发动机油的评估试验方法
ANSI/ASTM D6750-2008 高速单缸柴油发动机用发动机油的评估试验方法.1K程序(0.4%硫燃料)和1N程序(0.04%硫燃料)
ANSI/ASTM D4742-2008 用薄膜氧气垂直管道法测定汽油发动机油的氧化稳定性的试验方法
ANSI/ASTM D4294-2008 用能量色散X射线荧光光谱法对石油和石油产品中硫的试验方法
ANSI/ASTM D6923-2008 高速、单缸柴油机中的引擎机油性能评估用试验方法.Caterpillar 1r试验程序
ANSI/ASTM D1250-2008 石油测量表用指南
ANSI/ASTM D1319-2008 用荧光指示剂吸附法测定液化石油产品中烃类的试验方法
ANSI/ASTM D86-2008 大气压下石油产品蒸馏的试验方法
ANSI/ASTM D93-2008 用潘斯基-马丁斯闭杯试验器测定闪点的试验方法
ANSI/ASTM D6618-2008 柴油四冲程超动力1m-PC单缸油试验发动机中发动机油的评估试验方法
ANSI/ASTM D6557-2008 汽车发动机油防锈特性的评估用试验方法
ANSI/ASTM D6593-2008 在低温和低载条件下工作的使用汽油燃料的火花点火式内燃机中抑制沉积物形成用汽车发动机油评估的试验方法
ANSI/ASTM D5293a-2008 使用冷启动模拟器对-5~-35℃发动机油表观粘度的试验方法
ANSI/ASTM D5704-2008 人工传输和主传动轴用润滑油的热和氧化稳定性评估的试验方法
ANSI/ASTM D6751-2008 中间馏出燃料用生物柴油机混合燃料(B100)的规范
ANSI/ASTM D6378-2008 石油产品、烃类和氧化烃类混合物蒸气压(VPx)的测定用试验方法(三级膨胀法)
ANSI/ASTM D7467-2008 柴油和生物柴油混合物的规范
ANSI/ASTM D7462-2008 柴油(b100)和生物柴油与中馏分石油燃料混合物的氧化稳定性的试验方法
ANSI/ASTM D7419-2008 使用带有折射指数检测的高效液相色谱分析法(hplc)测定润滑剂油基中总芳香族含量和总饱和物含量的试验方法
ANSI/ASTM D5773-2008 测定石油产品始凝点的试验方法(恒定降温率法)
ANSI/ASTM D2163-2008 用气相色谱法分析液化石油(lp)气和丙烷浓缩物的试验方法
ANSI/ASTM D7452-2008 在高速和冲击承载条件下最终驱动轴用润滑剂的载荷运输性能的评估用标准试验方法
ANSI/ASTM D7455-2008 元素分析用石油和润滑产品样品制备用实施规程
ANSI/ASTM D7261-2008 使用便携式分离仪测定馏出柴油机燃料的脱水特性的试验方法
ANSI/ASTM D3242-2008 航空涡轮燃料酸度的试验方法
ANSI/ASTM D7450-2008 Api类G1-5设备用后轴齿轮润滑油的规范
ANSI/ASTM D7422-2008 T-12废气再循环柴油机中柴油机油的评估用试验方法
ANSI/ASTM D3699-2008 煤油规范
ANSI/ASTM D3339-2008 使用半微量颜色指示剂滴定法测定石油产品酸值的试验方法
ANSI/ASTM D6468-2008 溜出燃料的高温稳定性用试验方法
ANSI/ASTM D2885-2008 使用在线直接比较技术测定火花点燃式发动机燃料辛烷值的试验方法
ANSI/ASTM D5453-2008 使用紫外线荧光法测定轻质烃、火花点燃式发动机燃料、柴油机燃料和机器润滑油中硫总含量的试验方法
ANSI/ASTM D4814-2008 汽车火花点燃式发动机燃料规范
ANSI/ASTM D4860-2008 中间馏分燃料中游离水分和颗粒污染物用试验方法(净度和亮度值)
ANSI/ASTM D5762-2008 使用船舶入口化学发光的石油和石油产品中氮用试验方法
ANSI/ASTM D7416-2008 专用五部分(电介质电容率、带合闸磁场的时间分辨电介质电容率、激光粒子计数器、微小的碎片分析和轨函数粘度计)综合试验器用工作润滑剂分析用标准实施规程
ANSI/ASTM D7464-2008 生物学试验用液体燃料、相关材料和燃料系统元件的手工抽样用实施规程
ANSI/ASTM D2068-2008 溜出燃料油的过滤渣堵塞可能性用试验方法
ANSI/ASTM D6377-2008 原油蒸汽压力的测定用试验方法:VPCRx(膨胀法)
ANSI/ASTM D6890a-2008 用等容室燃烧法测定柴油燃料的点火延迟和导出十六烷值(DCN)的试验方法
ANSI/ASTM D4175-2008 与石油、石油产品和润滑剂相关的术语
ANSI/ASTM D6121b-2008 低速和高扭矩条件下准双曲面主齿轮驱动轴用润滑剂负载能力的评估用试验方法
ANSI/ASTM D7463-2008 燃料、燃料/水混合物和加入水的燃料中微生物三磷酸腺苷(atp)含量的测定用试验方法
ANSI/ASTM D7451a-2008 轻馏分和中间馏分及压缩和点火燃料的水分离性能用试验方法
ANSI/ASTM D7500-2008 气相色谱法测定沸腾范围为100~735℃的馏分和润滑基油的沸腾范围分布用方法
ANSI/ASTM D4863-2008 双冲程循环汽油发动机润滑剂的润滑性测定用试验方法
ANSI/ASTM D6423-2008 乙醇、改性燃料乙醇和燃料乙醇Ed75-ed85的Phe测定用试验方法
ANSI/ASTM D974-2008 使用颜色指示剂滴定法测定酸碱值的试验方法
ANSI/ASTM D4477-2008 硬质、未增塑聚氯乙烯(PVC)拱腹用规范
ANSI/ASTM E2234-2008 根据AQL检索属性从产品流中取样的实施规程
ANSI/TIA-492AAAA-B-2008 62.5微米心线直径/125微米覆层直径Ia级分级指数多模光纤的详细规范
ANSI/TIA-942-1-2008 数据中心同轴电缆布线规范和应用距离
ANSI/ATIS 1000026-2008 时间/边界控制功能和要求
ANSI ATIS1000025-2008 信令安全用美国标准.UNI通路和信令标准
ANSI/TIA-492AAAC-B-2008 850nm激光优化的、50um心线直径/125um覆层直径Ia级分级指数多模光纤的详细规范
ANSI/TIA-492AAAB-A-2008 50um心线直径/125um覆层直径1a级分级指数多模光纤的详细规范
ANSI/IEEE 1619.1-2007 存储装置用带有长度扩展的校验加密用标准
ANSI/TIA-470.130-C-2008 通信.电话终端设备.带有耳机的模拟电话机的传输要求
ANSI/IEEE 802.1ag-2007 局域网和城域网用标准.虚拟桥接局域网.修改件5:连通性故障管理
ANSI/CEA 775-C-2008 DTV 1394接口规范
ANSI INCITS438-2008 信息技术.服务器管理命令行协议(SM CLP)规范
ANSI/CEA 775-2-A-2008 数字存储介质用设备选择信息
ANSI/TIA-455-12B-2008 纤维光学元件用FOTP-12液体沉浸试验
ANSI/CEA 2018-2008 任务模型描述CE任务1.0
ANSI/CEA 2033-2008 OpenEPG.电子程序指南数据交换用规范
ANSI/ADA SpecificationNo. 73-2008 牙科吸收针尖
ANSI/HL7 CMSAPP, R 1-2008 HL7临床上下文管理规范(CCOW)用户校验保护通行证建议.第1版
ANSI/HL7 CMSUSPP, R 1-2008 健康等级7(HL7)临床上下文对象工作组(CCOW)用户校验保护通行证建议.第1版
ANSI/HL7 CMSCMPP, R 1-2008 HL7临床上下文管理规范(CCOW)用户校验保护通行证建议.第1版
ANSI/IEEE 1542-2007 位于附近或电力线下面的灌溉设备的安装、维修和操作指南
ANSI/UL 697-2008 玩具变压器的安全标准
ANSI/UL 561-2008 地板抛光机
ANSI/IEEE 1617-2007 常电压地下电缆同心轴电中性腐蚀的探测、缓解和控制指南
ANSI/IEEE C57.12.36-2007 油浸式配电站变压器的标准要求
ANSI/IEEE 1561-2007 远程混合电力系统中酸性铅蓄电池的性能和寿命的优化用指南
ANSI/IEEE 1407-2007 使用水罐装容器进行中等电压(5kV-35kV)挤压电力电缆加速老化试验的指南
ANSI/IEEE C37.230-2007 配电线路用保护继电器指南
ANSI/IEEE 1553-2007 水轮发电机用模绕线圈和棒耐电压测试的标准
ANSI/EIA-364-105-A-2008 电连接器用高-低温度试验程序
ANSI/EIA-364-21D-2008 电气连接器、插座和同轴触点用耐绝缘试验程序
ANSI/EIA-364-10E-2008 电连接器用液体浸入试验程序
ANSI/EIA-364-60A-2008 电连接器和插座用触点抛光材料孔隙率测试的一般方法
ANSI N43.3-2008 一般辐射安全.用于非医疗的X射线和密封γ射线源辐射安全能量小于10Mev(兆电子伏特)的装置
ANSI/ASTM E1354-2008 使用耗氧热量计测定材料和产品的热和可见烟释放速率的试验方法
ANSI/ASHRAE 15Addendum b-2008 制冷系统用安全标准
ANSI/ASSE A10.19-2008 桩安装和拔除操作的安全要求
ANSI/ASHRAE 15Addendum e-2008 制冷设备用安全标准
ANSI/ASME B31.1a-2008 动力管道
ANSI/ABYC H-3-2008 外窗、挡风玻璃、舱口、门、舱门窗户和玻璃窗材料
ANSI/RVIA TSIC-1-2008 挂车上轮子装配用推荐实施规程控制
ANSI/GEIA STD-0005-3-2008 航空航天和包含无铅焊料的高性能电子设备的可靠性试验
ANSI/ASTM F1974-2008 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插配件用规范
ANSI/ASME B18.21.3-2008 木结构用复式圆弹簧锁紧垫圈
ANSI/AWWA E103-2008 水平和垂直管线轴流泵
ANSI Z245.41-2008 废弃物和可回收材料用设备技术和操作.混合的可回收材料的处理设备.安全要求
ANSI Z245.21-2008 废弃物和可回收材料用设备技术和操作.固定压实机.安全要求
ANSI Z245.30-2008 废弃物和可回收材料用设备技术和运行的美国国家标准.废弃物容器.安全要求
ANSI/AMCA 300-2008 风扇噪音测试用回响室法
ANSI/AMCA 320-2008 使用声音强度进行风扇噪音测试的实验室方法
ANSI/UL 140-2008 保险箱和保险库的再加锁装置
ANSI/ASME B31J-2008 金属管道部件应力强化系数(i-系数)的测定用标准试验方法
ANSI/AWS A5.01M/A 5.01-2008 焊接消耗品及相关工艺用程序指南.助熔剂和气体保护电焊接工艺
ANSI/UL 443-2008 燃油炉燃料用辅助钢罐的安全标准
ANSI/ASTM F2735a-2008 SDR9交联聚乙烯(PEX)和升温聚乙烯(PE-RT)管道用塑料内插配件规范
ANSI/ASTM E1994-2008 使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的实施规程
ANSI/ASTM E1725-2008 电子系统元件用耐火隔离系统的着火试验用试验方法
ANSI/UL 924-2008 应急照明和电源设备
ANSI/UL 2034-2008 单一和多测点一氧化碳报警器
ANSI/UL 1069-2008 医院信号装置和呼叫护士用设备
ANSI/ASTM E1488-2008 制定和运用试验方法用统计程序的测试方法
ANSI/OPEI B71.10-2008 小型野外地面支持的户外电动设备用汽油燃料系统.试验程序
ANSI/ASA S12.6b-2008 听力保护器的人耳衰减测量方法
ANSI/ASA S12.6a-2008 听力保护器的人耳衰减测量方法
ANSI/NCPDP SCV 10.3-2008 处方者/药剂师界面SCRIPT版本10.3
ANSI/IEEE C37.20.7-2007 内部电弧故障用压力等级小于38kV的金属外壳开关装置的测试用指南
ANSI/IEEE C57.93-2007 液浸式电力变压器的安装和维护用指南
ANSI N43.8-2008 工业致电离辐射计量装置的分类
ANSI MH16.1-2008 工业用钢制储存支架的设计、试验和使用
ANSI/ASTM D3839-2008 柔性增强热固性树脂管和增强塑料砂浆管的地下安装用实施规程
ANSI Z21.50a-2008 通风的燃气壁炉用标准
ANSI/ASTM D2774-2008 热塑压力管地下安装用实施规程
ANSI/ASTM E119-2008 建筑结构和材料着火试验的试验方法
ANSI/ASTM E84-2008 建筑物材料表面燃烧特征的试验方法
ANSI/ASTM F876-2008 交联聚乙烯(PEX)管规范
ANSI/ASTM E2032-2008 根据ASTM E 119实施的耐火试验数据的扩充指南
ANSI/ASTM D2665a-2008 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的规范
ANSI/ABYC H-40-2008 抛锚、停泊和靠船墩
ANSI/ASTM F2157-2008 合成铺面材料跑道用规范
ANSI/AISI S110-2008 冷成型钢结构系统的地震设计用标准.专用螺栓连接的旋转轴结构
ANSI/AWS C7.4/C 7.4M-2008 激光束焊接操作人员资格鉴定的程序规范
ANSI/ASTM E2281-2008 工艺和测量能力指数的规程
ANSI/AWS D10.7M/D 10.7-2008 铝和铝合金管的气体保护电弧焊用指南
ANSI/AWS C3.3-2008 重要的钎焊部件的设计、生产和检验用推荐实施规程
ANSI/AWWA B602-2008 硫酸铜
ANSI/AWWA B512-2008 二氧化硫
ANSI/UL 1123-2008 海上浮力装置的安全标准
ANSI/ASTM E2067-2008 全刻度耗氧热量计燃烧试验用实施规程
ANSI/ASME Y14.44-2008 电气和电子部件和设备用参考名称
ANSI/ASTM F2275-2008 树架制造商质量保证程序的实施规程
ANSI/ASME Y14.34-2008 相关表格
ANSI/ASTM F2122-2008 树架安全装置用实施规程
ANSI A300 Part 1-2008 植保作业.树木、灌木和其它木本植物的维护.标准实施规程
ANSI/SCTE 03-2008 同轴电缆结构回路损耗用试验方法
ANSI/SCTE 66-2008 同轴电缆阻抗的试验方法
ANSI/IEEE C37.110-2007 保护继电器用电流变压器的应用指南
ANSI/SCTE 71-2008 75欧姆编织的同轴多用电缆用规范
ANSI/UL 1660-2008 不漏液体的非金属软管的安全标准
ANSI/SCTE 68-2008 无源电压降:75欧姆~300欧姆的匹配变压器
ANSI/SCTE 48-2-2008 使用闭合灵敏磁场探针测量有源和无源同轴电缆装置的相关屏蔽作用的试验程序
ANSI/UL 67-2008 仪表板用安全标准
ANSI/UL 1446-2008 绝缘材料的系统用安全标准.总则
ANSI/UL 1077-2008 电气设备用辅助保护器用安全标准
ANSI/ASME PTC19.11-2008 动力循环中水和蒸汽的取样、调节和分析
ANSI/ASTM E1995-2008 在单个闭室中利用水平试样测量烟雾昏暗度的试验方法
ANSI/ASTM E2102-2008 使用锥形辐射加热器屏蔽用质量损失和可燃性测量用试验方法
ANSI/ASTM E2257-2008 墙壁和天花板材料和组件的房屋防火试验用标准方法
ANSI/ASTM F679-2008 大口径聚氯乙烯(PVC)塑料污水管及配件的标准规范
ANSI/ASTM F2023-2008 氯化热水用交联聚乙烯(PEX)管和设备抗氧化性的评估用试验方法
ANSI/ASME Y14.31-2008 未标尺寸的制图
ANSI/ASTM F2098-2008 确保SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子的试验方法
ANSI/ASME B18.31.2-2008 连续作用和双端螺柱.英寸系列
ANSI/ASME B18.16.6-2008 尼龙嵌入防松螺母(英寸系列)
ANSI/ASME B18.31.1M-2008 米制连续作用和双端螺柱
ANSI/ASME PTC25-2008 减压装置
ANSI/ASME B30.24-2008 集装箱起重机
ANSI/IAAMC A100.1-2008 联合管理公司用优良实践标准
ANSI/ASTM F1352-2008 固定剪刃的粗大尖形铁箭头的性能和安全标准用指南
ANSI/ASTM F2623-2008 升温的(PE-RT)材料标准尺寸比(SDR)为9的管道用聚乙烯的标准规范
ANSI/ASTM E456-2008 质量和统计学的相关术语
ANSI/SCTE 35-2007 电缆的数字程序插入提示信息
ANSI/SCTE 141-2007 电缆调制解调器终端模数系统的操作支持系统接口
ANSI INCITS439-2008 信息技术.数据交换用融合信息格式
ANSI/SCTE 144-2007 测量投射和反射的试验程序
ANSI/SCTE 140-2007 电缆调制解调器IPv4和IPv6路由器规范
ANSI/SCTE 136-2-2007 电缆调制解调器TDM仿真接口标准
ANSI ATIS0600308-2008 中央办公室设备.静电放电抗干扰要求
ANSI/SIA OSIPS-DVI-01-2008 开放式系统集成和性能标准.数字视频接口数据模型
ANSI/SCTE 48-1-2007 用GTEM电池的无源和有源装置用测量屏蔽有效性的试验方法
ANSI/SCTE 24-23-2007 有线电话中IP电话用BV32语音多媒体数字信号编解码器规范
ANSI/SCTE 143-2007 盐雾用试验方法
ANSI ATIS0700004.a-2008 大容量空分多路存取(HC-SDMA)无线电接口标准的附录
ANSI/TIA-102.CAAA-C-2008 数字C4FM/CQPSK无线电收发机测量方法
ANSI/ASNT CP-106-2008 无损检测.人员资格鉴定与认证
ANSI/HL7 V3 AB, R 2-2008 HL7译本3标准:会计和记账.第1版
ANSI/HL7 V3 CR, R 4-2008 HL7第3版标准:索赔和补偿.第4次发布
ANSI A300 Part 4-2008 树木养护作业.树木、灌木和其他木本植物的维护:标准实施规程.第4部分:树木的照明保护装置
ANSI/ASAE S319.4-2008 通过筛分测定和表示饲料精细度的方法
ANSI/SCTE 76-2007 天线选择器开关
ANSI/SCTE 81-2007 耐电涌测试程序
ANSI/IEEE 532-2007 电力仪器和控制电缆护套的选择和试验用指南
ANSI/IEEE 1122-2007 高电压脉冲测试中测量用数字记录器标准
ANSI/VITA 30.1-2008 冷却传导欧洲卡用2mm设备实施规程
ANSI/IEEE 98-2007 固体电气绝缘材料的热评估用试验程序的制备标准
ANSI ATIS0300255-2008 在使用中的非侵入测量装置(INMD).适用于非侵入测量装置测量的用户意见模式方法学
ANSI/EIA-364-86-2008 电连接器和插座的偏振/代码钥匙超应力试验程序
ANSI/IEEE 691-2007 传输结构的基础设计和测试用指南
ANSI/EIA-364-20D-2008 电连接器.耐电压试验程序
ANSI/ICEA S-95-658-2008 电能配送用额定电压≤2000伏特的非铠装电力电缆
ANSI/UL 181A-2008 与刚性空气管一起使用的密闭系统的安全标准
ANSI/ASHRAE 130-2008 空气终端装置的测试方法
ANSI/ASHRAE/SMACNA 126-2008 HVAC空气管道的试验方法
ANSI/UL 199-2008 防火设备用自动喷头用安全标准
ANSI/NSF 24(i3)-2008 游乐车辆用管道系统部件.第3版
ANSI/SMACNA 008-2008 已使用建筑物处于修建状态下的IAQ导则
ANSI/ASHRAE 111-2008 建筑采暖通风和空调(HVAC)系统的测量、测试、调节和平衡
ANSI/UL 181B-2008 与柔性风管和风管接头一起使用的密闭系统的安全标准
ANSI Z21.11.2a-2008 燃气室加热器用标准.卷II、不通风房间加热器
ANSI/NSF 24(i4)-2008 娱乐车辆用管道工程系统部件.条款4
ANSI/AISI S230/S 1-2008 冷成型钢框架用标准附录1.一户和两户住宅的惯用方法
ANSI/AISI S214-07/S 1-2008 冷成型钢框架用北美标准的附录1.桁架设计
ANSI A118.10-2008 薄瓷砖和规格石料铺设用承重粘结防水膜
ANSI A136.1-2008 瓷砖铺设用有机粘结剂的规范
ANSI/ASTM D2665-2008 聚氯乙烯(PVC)塑料排水管、排污管和通风管及配件的规范
ANSI/SCTE 118-2-2007 节目规定广告插入.交通通信应用数据模型内容供应商
ANSI/SCTE 58-2007 AM交叉调制测量
ANSI/ASHRAE 17-2008 温度调节用制冷膨胀阀的容量测试方法
ANSI/ASHRAE 41.10-2008 用流量计对挥发性制冷剂质量流量测量用标准方法
ANSI/ASHRAE 34i-2008 制冷剂的名称和安全分类
ANSI/ASHRAE 34l-2008 制冷剂的命名和安全分类
ANSI/ASHRAE 55b-2008 人类居住的热环境条件
ANSI/ASHRAE 15d-2008 制冷设备的安全标准
ANSI/ASHRAE 55a-2008 人类居住热环境条件
ANSI/ASTM E8-2008 金属材料拉伸试验的试验方法
ANSI/AWS B5.17-2008 焊接加工人员资格鉴定用规范
ANSI/ASTM E18-2008 金属材料的洛氏硬度用试验方法
ANSI/API 618-2008 石油、化工和天然气工业设备用往复式压缩机
ANSI/SCTE 88-2007 聚乙烯套管纵向收缩率的试验方法
ANSI/INCITS/ISO/IEC 18028-2-2008 信息技术.安全技术.IT网络安全.第2部分:网络安全体系结构
ANSI/SCTE 135-2-2008 DOCSIS 3.0第2部分:MAC和上层协议
ANSI/INCITS/ISO/IEC 18031-2008 信息技术.安全技术.随机比特生成
ANSI/INCITS/ISO/IEC 18028-1-2008 信息技术.安全技术.IT网络安全.第1部分:网络安全管理
ANSI/SCTE 145-2008 单载波用无源第二代谐波失真的试验方法
ANSI/INCITS/ISO/IEC 18026-2008 信息技术.空间参考模式(SRM)
ANSI/ASTM F2218-2008 计算机处理系统用硬件执行指南
ANSI/INCITS/ISO/IEC 18043-2008 信息技术.安全技术.入侵检测系统的选择、开发和操作
ANSI/INCITS/ISO/IEC 27006-2008 信息技术.安全技术.信息安全管理系统的审核和认证的机构要求
ANSI/SCTE 53-2008 异步数据传输方法
ANSI/IEEE 1588-2008 网络测量和控制系统用精密时钟同步协议标准
ANSI/UL 508-2008 工业控制设备
ANSI/SCTE 38-11-2008 HMS数据转发器管理信息库(MIB)SCTE-HMS-HEADENDIDENT-MIB
ANSI X12.22-2008 数据段索引
ANSI/IEEE 829-2008 软件和系统试验文件用标准
ANSI/IEEE 15288-2008 系统和软件工程.系统寿命周期过程
ANSI/SCTE 65-2008 数字电缆电视用频带外传送的服务信息
ANSI/SCTE 52-2008 数据加密标准.密码块链接信息包加密规范
ANSI/IEEE 1101.1-2008 使用IEC 60603-2连接器的微型计算机用机芯规范的标准
ANSI/IEEE 1014-2008 通用底板总线用标准:VME总线
ANSI X9.110-2008 电子合同的位置传递
ANSI/ASTM E2159-2008 评审员/审核员或技术专家的选择、委派和监控的指南
ANSI X12.3-2008 数据元词典
ANSI X12.1-2008 业务集表格
ANSI/ADA SpecificationNo. 113-2008 牙周刮匙、牙刮器和牙挖器
ANSI/ADA SpecificationNo. 89-2008 牙科工作灯
ANSI/AAMI ST41-2008 卫生保健设施中的环氧乙烷灭菌:安全和效能
ANSI Z80.23-2008 眼科学.角膜形状体系.标准术语.要求
ANSI/AIHA Z9.6-2008 磨削、抛光和磨擦用排气系统
ANSI/AAMI RD47-2008 人造肾脏的再生
ANSI O5.1-2008 规范和尺寸
ANSI/NEMA ICEAT-27-581-2008 试验用挤压绝缘体电缆、控制电缆、测量仪器电缆和便携式电缆的标准试验方法
ANSI/ANSLG C78.44-2008 双端引线的金属卤素灯
ANSI/UL 5A-2008 非金属表面导线管和配件用安全标准
ANSI/UL 60745-2-3-2008 手持式电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求
ANSI/UL 355-2008 电缆卷盘
ANSI/AHAM DH-1-2008 减湿器
ANSI/ANS 15.16-2008 研究反应堆的应急方案
ANSI/ASTM E2230-2008 放射性材料用B型包装件的热合格鉴定用规程
ANSI/UL 19-2008 带衬的消防软管和软管组件用安全标准
ANSI/ASHRAE 170-2008 卫生保健设备用通风
ANSI/ASCE T&DI21.3-2008 自动载人移动工具.第3部分
ANSI/AWWA C620-2008 大于等于3英寸水管的环氧内衬相应位置用喷雾器
ANSI/ASHRAE 52.2b-2008 颗粒大小移除用通用通风空气清洁装置的试验方法
ANSI A108.02a-2008 通用要求:材料、环境和工艺
ANSI/ASHRAE/IESNA 90.1q-2008 低层住宅建筑除外的建筑物用能量标准
ANSI/SPRI WD-1-2008 屋顶组件用风设计标准规程
ANSI/ASHRAE/IESNA 90.1k-2008 低层住宅建筑除外的建筑物用能量标准
ANSI/UL 260-2008 防火设施用蒸汽收集器和集水阀用安全标准
ANSI/UL 2079-2008 建筑物连接系统的耐火试验安全标准
ANSI/ASHRAE/IESNA 90.1l-2008 低层住宅建筑除外的建筑物用能量标准
ANSI/UL 730-2008 燃油壁炉的安全标准
ANSI/ASTM D3034-2008 PSM型聚氯乙烯(PVC)排水管和配件用规范
ANSI/ASHRAE/IESNA 90.1ad-2008 低层住宅建筑除外的建筑物用能量标准
ANSI/ASTM E329-2008 从事结构检验和/或测试的机构用规范
ANSI/UL 729-2008 燃油地板炉的安全标准
ANSI/UL 193-2008 防火设施用报警阀
ANSI/ASHRAE/IESNA 90.1j-2008 低层住宅建筑除外的建筑物用能量标准
ANSI/ASHRAE 62.2a-2008 低层住宅建筑的通风和验收的室内空气质量
ANSI/ASHRAE/IESNA 90.1ac-2008 低层住宅建筑物除外的建筑物用能量标准
ANSI/ASHRAE/IESNA 90.1n-2008 低层住宅建筑除外的建筑物用能量标准
ANSI Z83.18b-2008 再循环直接燃气式工业气体加热器
ANSI/AWWA E102-2008 潜水立式涡轮泵
ANSI/ASTM F2735-2008 SDR9交联聚乙烯(PEX)和升温管道用聚乙烯的塑料内嵌配件用规范
ANSI/HI 2.3-2008 设计和应用的立式泵
ANSI/ASME BTH-1-2008 吊钩下部提升装置的设计
ANSI/HI 2.1-2.2-2008 命名和定义的立式泵
ANSI/ASME B18.16.4-2008 90000PSI锯齿形的六角法兰防松螺母(英寸系列)
ANSI/ASHRAE 18-2008 带自备机械制冷系统的饮用水冷却器的评定用测试方法
ANSI/ASA S12.9 Part 6-2008 环境噪声的描述和测量用音量及程序.第6部分:与家里听到噪声情况有关导致惊醒的测量方法
ANSI/ASTM F2651-2008 与运动用天然表面的土壤和草皮术语相关的术语
ANSI/BHMA A156.3-2008 出口装置
ANSI/BHMA A156.16-2008 辅助五金件
ANSI/ASTM F1492-2008 溜冰板和花样滑旱冰用头盔规范
ANSI/BIFMA/SOHO S6.5-2008 小型办公室/家庭办公家具
ANSI/INCITS/ISO/IEC 19752-2008 信息技术.含打印机组件的单色电子照相印刷机和多功能装置用着色盒打印量的测定方法
ANSI A250.13-2008 推拉门配件用耐强烈暴风部件的测试和评估
ANSI/ASME B107.54-2008 重型锤击工具.安全要求
ANSI/API RP17B-2008 挠性管用推荐实施规程
ANSI/ASTM F1973-2008 聚乙烯(PE)和聚酰胺11(PA11)及聚酰胺12(PA12)燃料气体分配系统中工厂装配的阳级冒口和过渡配件用规范
ANSI/ASTM D3679-2008 硬质聚氯乙烯(PVC)挡板规范
ANSI/AWWA B202-2008 水处理.生石灰和熟石灰
ANSI/AWWA B201-2008 碳酸钠
ANSI/AF&PA SDPWS-2008 风和地震用特殊设计设备
ANSI/HFES 200-2008 软件用户接口的人类因素工程
ANSI/IEEE 1631-2008 服从美国8-VSB数字电视传输屏框的测量用推荐实施规程
ANSI/NIST-ITL 2-2008 指纹、面部和其他生物统计信息交换的数据格式.第2部分:可扩展标记语言(XML)版本
ANSI ATIS1000024-2008 信号安全用US标准.安全路标
ANSI/TIA-102.AABC-B-4-2008 项目25中继控制信道消息修改件.TDMA运输频道作业的新技术标准项目数字无线电技术标准
ANSI/INCITS/ISO/IEC 15944-2-2008 信息技术.商务运作视图.第2部分:商业项目的脚本及其附件注册
ANSI/IEEE 1633-2008 软件可靠度的推荐实施规程
ANSI/SIA OSIPS-01-2008 开放式系统集成和性能标准.框架
ANSI/CEA 2031-2008 移动扩音器设备的试验和测量方法
ANSI ATIS0300276-2008 操作、管理、维护和保障.公共通信网络的安全要求:管理平面用安全要求基线
ANSI/IEEE 1900.2-2008 波带内及邻近波带干扰和无线电系统间共存的分析用推荐实施规程
ANSI/ATIS 0500006-2008 紧急信息服务接口(EISI)ALI设备
ANSI/ATIS 1000017-2008 ISDN用户间的相互作用.带ANSI扩展的窄带信令语法(NSS)的网络接口协议和会话发起协议(SIP)
ANSI/INCITS/ISO/IEC 10373-6AMD 5-2008 识别卡.试验方法.第6部分:近程卡.修改件5:fc/64、fc/32和fc/16的比特速率
ANSI/IEEE 1594-2008 高架公用线路用螺旋状纤维光学光缆系统(WRAP光缆)用标准
ANSI INCITS440-2008 信息技术.卡片耐久性/工作寿命
ANSI/INCITS/ISO 19141-2008 地理信息.移动要素的规划
ANSI/INCITS/ISO/IEC 15944-1-2008 信息技术.商务协议语意描述技术.第1部分:实施用开放电子数据交换操作问题
ANSI C63.9-2008 发射机功率等级8瓦特以下的音频办公设备通用发射装置的射频抗扰度
ANSI Z136.7-2008 激光保护设备的测试和标注用美国国家标准
ANSI ATIS0900105-2008 同步光导网络(SONET).包括多路结构、速率和格式的基本描述(包括T1.105a-2002 补充件)
ANSI INCITS423.1-2008 信息技术.生物统计数据交换格式标准的合格性的测试方法学.第1部分:通用合格性的测试方法学
ANSI/NFPA 115-2008 激光器防火的标准
ANSI INCITS383-2008 信息技术.生物统计轮廓.互操作性和数据交换生物统计学.基于生物统计学的运输工人的鉴别和识别
ANSI INCITS398-2008 信息技术.通用生物统计交换格式框架(CBEFF)
ANSI INCITS419-2008 信息技术.光纤信道中枢.4(FC-BB-4)
ANSI/APCO ANS1.103.1-2008 无线9-1-1调度和管理有效实施规程指南
ANSI N42.44-2008 检查站房间式X射线成像安全系统的性能用美国国家标准
ANSI/ADA SpecificationNo. 1040-2008 牙科扩展的护理记录ASTM连贯性
ANSI/ADA SpecificationNo. 71-2008 牙根管填充冷凝器
ANSI/AIHA Z9.11-2008 实验室停止执行的标准
ANSI/NFPA 499-2008 化学品加工区域中电气装置用易燃粉尘和危险区域的分类的推荐实施规程
ANSI/IEST/ISO 14644-6-2008 无菌室及相关受控环境.第6部分:词汇
ANSI/NFPA 1999-2008 急救医疗手术用防护服的标准
ANSI/ASABE S608-2008 农业设备用头上戴的小型照明灯
ANSI/ASABE S279.14-2008 公路上农业野外设备的照明和标记
ANSI/ASABE S602-2008 拖拉机式铲运机中农用拖拉机的通用安全标准
ANSI/IEEE C62.11a-2008 交流电源电路(大于1kV)用金属氧化电涌放电器的标准.修改件:电站、中间装置和配电放电器用短路试验
ANSI/SCTE 153-2008 无源电压降:分流片、耦合器和功率插入器
ANSI/IEEE C37.43-2008 分路电容器保护用额定电压为1kV~38kV高压冲击式熔断器、限流和结合型配电及功率等级外部熔断器的标准规范
ANSI/TIA-604-10B-2008 纤维光学连接器互配性标准
ANSI/SCTE 152-2008 主要插头接口的接触电阻测量用试验程序
ANSI/NEMA ANSLGC 78.377-2008 电灯用固态照明产品色度的规范
ANSI/NFPA 496-2008 电气设备的清洗和密封外壳的标准
ANSI/SCTE 312007-2008 测量连芯直径的试验方法
ANSI/UL 2459-2008 绝缘的多极分线连接器
ANSI/ANS 2.27-2008 地震危害评估用核设备场所的调查标准
ANSI/ANS 8.27-2008 轻水反应堆(LWR)燃料用燃耗信贷
ANSI/ASTM D7301-2008 适用于受低中子Irr Adiation剂量影响元件的核石墨用规范
ANSI/ANS 2.29-2008 地震危害可能性分析
ANSI N13.54-2008 核医学中胎儿辐射剂量的计算
ANSI/NFPA 801-2008 处理放射性材料用设备的防火标准
ANSI N42.48-2008 借助分光镜的人体辐射探测器(SPRDs)的性能要求
ANSI/AISI S214-07/S 2-2008 冷成型钢框架用北美标准的附录2.桁架设计
ANSI/ASHRAE 182-2008 吸收水制冷和水加热外壳的试验方法
ANSI/ICC 600-2008 疾风区域中住宅建筑用标准
ANSI/AISI S230-07/S 2-2008 冷成型钢框架用标准附录2.一户和两户住宅的惯用方法
ANSI/ASHRAE/ACCA 180-2008 商业建筑HVAC设备的检查和维护标准规程
ANSI/ASHRAE/IESNA 90.1aw-2008 低层住宅建筑除外的建筑能效标准
ANSI/AWWA C104-2008 球墨铸铁水管和配件用水泥砂浆衬
ANSI/NSF 50(i43)-2008 游泳池、水疗中心/热浴盆用循环系统部件和相关材料
ANSI/AWWA C150-2008 球墨铸铁管的厚度设计
ANSI/NSF 50(i44)-2008 游泳池、水疗中心/热浴盆用循环系统部件和相关材料
ANSI/AWWA C229-2008 钢制水管的内部和外部熔接环氧涂层
ANSI/ASHRAE 145.1-2008 气相空气净化系统的性能评估用实验室试验方法:松散颗粒介质
ANSI/NFPA 1584-2008 消防应急操作和培训练习期间人员康复过程的标准
ANSI/NFPA 1964-2008 喷射喷嘴的标准
ANSI/NFPA 22-2008 灭火专用水箱的标准
ANSI/NFPA 1852-2008 开路独立式呼吸装置(SCBA)的选择、保养和维修标准
ANSI/NFPA 1989-2008 消防用应急呼吸保护装置的呼吸空气质量的标准
ANSI Z21.20a-2008 自动气体点火系统和元部件
ANSI/NFPA 140-2008 电影和电视制作演播室以及已验收的工作设备和工作场所的标准
ANSI/NFPA 1962-2008 消防水龙带的检验、养护和使用及其耦合器和喷嘴的工作性能测试的标准
ANSI/NFPA 30-2008 可燃性和易燃性液体规则
ANSI/NFPA 2001-2008 清洗剂灭火系统标准
ANSI/NFPA 301-2008 从着火商船逃生的安全规程
ANSI/NFPA 1561-2008 消防部门应急事故管理系统标准
ANSI/AWWA C208-2007 预制钢水管配件尺寸
ANSI/NFPA 1925-2008 海上消防船舶
ANSI/NSF 24(i6)-2008 游乐车辆用泵送系统部件
ANSI/IEEE 1474.3-2008 基于通信的训练控制(CBTC)系统设计和功能配置用推荐实施规程
ANSI/NFPA 415-2008 机场终点建筑、油料管道和装载道标准
ANSI/NSF 14(i24)-2008 塑料管道组件和相关材料
ANSI/AWWA C512-2007 给水装置用放气阀、空气/真空和混合空气阀
ANSI/CSA LC6-2008 天然气动力隔膜泵
ANSI/AWWA C210-2008 钢制水管内外部用液态环氧树脂涂层系统
ANSI/AWWA C225-2008 钢制水管外部热融聚烯烃涂覆系统
ANSI/NFPA 1006-2008 救援技术人员专业资格鉴定标准
ANSI/AWWA C213-2007 钢制水管线的内、外部用熔融粘结环氧涂层
ANSI/NSF 49(i26)-2008 II级(层流)细木家具生物研究安全性
ANSI/BIFMA X5.5-2008 写字台试验
ANSI/AWS B2.1/B 2.1M-2008 焊接工艺和性能认证用规范
ANSI/ASME B107.53-2008 圆头锤
ANSI/ASME B107.41-2008 钉锤
ANSI/IICRC S520-2008 专业模具修复用标准和参考指南
ANSI/AWS D10.18M/D 10.18-2008 铁素体/奥氏体双相不锈钢管和管道的焊接指南
ANSI/AWWA C223-2008 结构钢和不锈钢开口管套
ANSI/AWS C3.2M/C 3.2-2008 评定硬钎焊接头强度的标准方法
ANSI/NFPA 59-2008 公用液化石油气设备的规范
ANSI/CSAA CS-CO-01-2008 一氧化碳监督站的反应标准
ANSI/ASTM F2231-2008 压力管用聚乙烯细样品上摆式冲击试验的试验方法
ANSI/ASTM F2720-2008 玻璃纤维增强的聚乙烯(pe-gf)螺旋缠绕大直径管用规范
ANSI/NSF 14(i22)-2008 塑料管道系统部件及相关材料
ANSI/NFPA 497-2008 化学品生产场所易燃液体、气体或水蒸气和电气装置危险位置的分类用推荐实施规程
ANSI/ASHRAE 171-2008 HVAC&R设备用地震控制装置的试验方法
ANSI/VITA 51.1-2008 可靠度预测MIL-HDBK 217辅助规范
ANSI ATIS0500007-2008 与网络设备共同工作的应急设备接口(EISI)
ANSI/INCITS/ISO/IEC 14473-2008 信息技术.办公设备.规定图像扫描器的最少信息
ANSI/ICEA S-112-718-2008 下水道环境中布置的光纤光缆
ANSI INCITS429-2008 信息技术.ANSI INCITS 358-2002用一致性试验方法论、BioAPI规范
ANSI/VITA 51.0-2008 可靠性预测
ANSI INCITS423.2-2008 信息技术.生物测定数据交换格式标准用一致性试验方法论标准.第2部分:数据交换的指纹细节格式INCITS 378-2004用一致性试验方法论
ANSI/IEEE 12207-2008 系统和软件工程.软件寿命周期过程
ANSI INCITS441-2008 信息技术.自动控制接口/驱动接口.命令.2(ADC-2)
ANSI/TIA-921-A-2008 通过网络协议的多媒体传输性能评估用网络模型
ANSI/UL 698A-2008 与危险(分类的)场所有关的工业控制板用安全标准
ANSI INCITS443-2008 信息技术.纤维信道存储网络PING(SNPing)
ANSI ATIS0300094-2008 支持ATIS问题管理标准的问题规则
SAE J1195 Cylinder Rod Wiper Seal Ingression Test (Cancelled Aug 1993)
SAE J1440 Off-Road Tire and Rim Classification-Forestry Machines
SAE J1063 Cantilevered Boom Crane Structures-Method of Test
SAE J1078 A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Boo
SAE J1462 External Automatic Slack Adjuster Test Procedure
SAE J2204 Tire Size Differential-Articulated Wheel Loader
SAE J1455 Joint SAE/Tmc Recommended Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks)
SAE J844 Nonmetallic Air Brake System Tubing
SAE J176 Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines
SAE J2237 Heavy-Duty Starter Remanufacturing Procedures
SAE J919 Sound Measurement--Off-Road Work Machines--Operator--Singular Type
SAE J1015 Ton Kilometer Per Hour Test Procedure
SAE J92 Snowmobile Throttle Control Systems
SAE J1279 Snowmobile Drive Mechanisms
SAE J1098 Ton Kilometer Per Hour Application
SAE J226 Engine Preheaters
SAE J930 Storage Batteries for Off-Road Work Machines
SAE J1559 Measurement of Solar Heating Effect
SAE J1362 Graphical Symbols for Operator Controls and Displays on Off-Road Self-Propelled Work Machines
SAE J1926/2 Connections for General Use and Fluid Power-Ports and Stud Ends With Iso 725 Threads and O-Ring Sealing-Part
SAE J1503 Performance Test for Air-Conditioned, Heated, and Ventilated Off-Road Self-Propelled Work Machines
SAE J246 Spherical and Flanged Sleeve (Compression) Tube Fittings
SAE J1667 Snap-Acceleration Smoke Test Procedure for Heavy-Duty Diesel Powered Vehicles
SAE J2280 Ship Systems and Equipment--Fasteners--Selection and Identification Requirements
SAE J2255 Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked- Equipped Truck Tractors, Buses, Trail
SAE J744 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J909 Three-Point Hitch, Implement Quick-Attaching Coupler, Agricultural Tractors (Cancelled Jul 1996, Superseded by
SAE J721 Operating Requirements for Tractors and Power Take-Off Driven Implements (Cancelled Jul 1996, Superseded by ASA
SAE J2131 Front-Mounted Linkage for Agricultural Wheeled Tractors (Cancelled Jul 1996, Superseded by ASAE S2513)
SAE J208 Safety for Agricultural Tractors (Cancelled Aug 1996, Superseded by ASAE S318.11)
SAE J1535 Performance Test for Windshield Defrosting Systems for Off-Road, Self- Propelled Work Machines
SAE J746 Hydraulic Motor Test Procedures
SAE J745 Hydraulic Power Pump Test Procedure
SAE J1029 Lighting and Marking of Construction, Earthmoving Machinery
SAE J2343 Recommended Practices for LNG Powered Heavy-Duty Trucks
SAE J880 Brake System Rating Test Code-Commercial Vehicles
SAE J688 Truck Ability Prediction Procedure (Cancelled Feb 1997, Superseded by J2188)
SAE J257 Brake Rating Horsepower Requirements-Commercial Vehicles
SAE J2286 Vendor Component Program Data File Interface for Oem Assembly Operations
SAE J751 Off-Road Tire and Rim Classification-Construction Machines
SAE J1977 Braking Performance--Rubber-Tired, Self-Propelled Cranes
SAE J844 Nonmetallic Air Brake System Tubing
SAE J1337 Off-Road Rim Maintenance Procedures and Service Precautions
SAE J2130 Self-Propelled Sweepers and Cleaning Equipment
SAE J1420 Supportive Information Report for the Fuel Economy Measurement Test (Engineering Type) for Trucks and Buses (C
SAE J1376 Fuel Economy Measurement Test (Engineering Type) for Trucks and Buses (Cancelled Dec 1997)
SAE J1614 Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines
SAE J63 Hole Placement on Dozer End Bits (Cancelled May 1998)
SAE J2394 Seven-Conductor Cable for ABS Power
SAE J2221 Standardized Symbols for Electrical Circuit Diagrams
SAE J1067 Seven-Conductor Cable
SAE J220 Crane Boomstop
SAE J1287 Measurement of Exhaust Sound Levels of Stationary Motorcycles
SAE J67 Shovel Dipper, Clam Bucket, and Dragline Bucket Rating
SAE J820 Crane Hoist Line Speed and Power Test Code
SAE J2458 Exhaust Brake Dynamometer Test and Capability Rating Procedure
SAE J1378 Electric Hourmeter Specification
SAE J1238 Rating Lift Cranes on Fixed Platforms Operating in the Ocean Environment
SAE J1167 Motorcycle Stop Lamp Switch
SAE J1166 Sound Measurement--Off-Road Self-Propelled Work Machines Operator-Work Cycle
SAE J1028 Mobile Crane Working Area Definitions
SAE J1230 Minimum Requirements for Wheel-Slip Brake-Control System Malfunction Signals (Cancelled Nov 1998)
SAE J690 Certificates of Maximum Net Horsepower for Motor Trucks and Truck Tractors (Cancelled Nov 1998)
SAE J695 Turning Ability and Off Tracking--Motor Vehicles
SAE J1516 Accommodation Tool Reference Point
SAE J786A Brake System Road Test Code?Truck, Bus, and Combination of Vehicles (Cancelled Dec 1998)
SAE J2180 A Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks
SAE J2181 Steady-State Circular Test Procedure for Trucks and Buses
SAE J1521 Truck Driver Shin-Knee Position for Clutch and Accelerator
SAE J1517 Driver Selected Seat Position
SAE J598 Sealed Lighting Units for Construction, Industrial and Forest Machinery (Cancelled Dec 1998)
SAE J687 Nomenclature?Truck, Bus, Trailer (Cancelled Dec 1998)
SAE J992 Brake System Performance Requirements--Truck, Bus, and Combination of Vehicles (Cancelled Dec 1998)
SAE J841 Operator Controls for Agricultural Wheeled Tractors (Cancelled Jan 1999, Superseded by ASAE S335.4)
SAE J296 Excavator, Mini-excavator, and Backhoe Hoe Bucket Volumetric Rating (Cancelled Jan 1999)
SAE J267 Wheels/Rims?Trucks?Performance Requirements and Test Procedures
SAE J231 Minimum Performance Criteria for Falling Object Protective Structure (Fops) (Cancelled Mar 1999, Superseded by
SAE J1043 Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines (Cancelled Mar 199
SAE J875 Trailer Axle Alignment
SAE J1057 Identification Terminology of Earthmoving Machines (Cancelled May 1999, Superseded by ISO 6165)
SAE J1473 Brake Performance--Rubber-Tired Earthmoving Machines (Cancelled May 1999, Superseded by ISO 3450)
SAE J321 Tire Guards for Operator Protection--Earthmoving Haulage Machines
SAE J1865 Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels
SAE J1741 Discriminating Back-Up Alarm System Standard
SAE J1626 Braking, Stability, and Control Performance Test Procedures for Air- and Hydraulic-Brake-Equipped Trucks, Truc
SAE J1262 Sound Measurement--Trenching Machines (Cancelled Jul 1999)
SAE J712 Industrial and Agricultural Disc Wheels
SAE J1194 Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1241 Fuel and Lubricant Tanks for Motorcycles
SAE J1806 Clutch Dimensions for Truck and Bus Applications
SAE J1451 A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycle
SAE J258 Circuit Breaker--Internal Mounted--Automatic Reset (Cancelled Jan 2000)
SAE J331 Sound Levels for Motorcycles
SAE J109 Service Brake System Performance Requirements--Motorcycles and Motor-Driven Cycles
SAE J108 Brake System Road Test Code--Motorcycles
SAE J742 Capacity Rating--Loader Bucket (Cancelled Feb 2000, Superseded by ISO 7546)
SAE J1026 Braking Performance--Crawler Tractors and Crawler Loaders (Cancelled Feb 2000, Superseded by ISO 10265)
SAE J1164 Labeling of ROPS and FOPS and OPS (Cancelled Feb 2000)
SAE J246 Spherical and Flanged Sleeve (Compression) Tube Fittings
SAE J1432 High-Mounted Stop Lamps for Use on Vehicles 2032 mm or More in Overall Width
SAE J971 Brake Power Rating Test Code--Commercial Vehicle Inertia Dynamometer
SAE J1134 SAE Nodal Mount
SAE J2513 Earthmoving Machinery-Coupling of Attachments to Skid Steer Loaders
SAE J870 Component Nomenclature Graders (Cancelled Jun 2000, Superseded by ISO 7134)
SAE J943 Slow-Moving Vehicle Identification Emblem (Cancelled Jun 2000, Superseded by ASABE S276.4)
SAE J869 Component Nomenclature--Construction Two- and Four-Wheel Tractors (Cancelled Jun 2000, Superseded by ISO 7133)
SAE J734 Component Nomenclature--Dumper Trailer (Cancelled Jun 2000)
SAE J728 Component Nomenclature--Scrapers (Cancelled Jun 2000, Superseded by ISO 7133)
SAE J1853 Hand Winches?Boat Trailer Type
SAE J1075 Sound Measurement--Construction Site
SAE J1016 Component Nomenclature--Dumpers (Cancelled Jun 2000, Superseded by ISO 7132)
SAE J2140 General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines
SAE J1283 Electrical Connector for Auxiliary Starting of Construction,Agricultural, and Off-Road Machinery
SAE J2506 Material Handler Nomenclature
SAE J1784 Specifications and Standards for Marine Hydraulic Systems and Components (Cancelled Aug 2000)
SAE J1924 OEM/Vendor Interface Specification for Vehicle Electronic Programming Stations (Cancelled Aug 2000)
SAE J1915 Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies
SAE J1343 Information Relating to Duty Cycles and Average Power Requirementsof Truck and Bus Engine Accessories
SAE J704 Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs
SAE J1944 Truck and Bus Multipurpose Vehicle Windshield Washer System
SAE J1035 Technical Publications for Agricultural Equipment (Cancelled Sep 2000)
SAE J2179 A Test for Evaluating the Rearward Amplificiation of Multi-Articulated Vehicles (Cancelled Sep 2000)
SAE J381 Windshield Defrosting Systems Test Procedure and Performance Requirements--Trucks,Buses, and Multipurpose Vehic
SAE J382 Windshield Defrosting Systems Performance Requirements--Trucks, Buses, and Multipurpose Vehicles (Cancelled Sep
SAE J1922 Powertrain Control Interface for Electronic Controls Used in Medium-and Heavy-Duty Diesel On-Highway Vehicle A
SAE J1250 In-Service Brake Performance Test Procedure--Vehicles Over 4500 kg (10 000 lb) (Cancelled Sep 2000)
SAE J1430 Retardation Capability of Off-Highway Dumpers and Scrapers (Cancelled Oct 2000, Superseded by ISO 10268)
SAE J1540 Manual Transmission Efficiency and Parasitic Loss Measurement
SAE J703 Fuel Systems--Truck and Truck Tractors
SAE J33 Snowmobile Definitions and Nomenclature--General
SAE J961 Marine Control Cable Connection--Engine Throttle Lever
SAE J694 Disc Wheel/Hub or Drum Interface Dimensions--Commercial Vehicles
SAE J1193 Nomenclature and Dimensions for Hydraulic Excavators (Cancelled Mar 2001, Superseded by ISO 7135)
SAE J1036 Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors (Cancelled Mar 2001)
SAE J1992 Wheels/Rims--Military Vehicles--Test Procedures and Performance Requirements
SAE J2548 Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines
SAE J366 Exterior Sound Level for Heavy Trucks and Buses
SAE J848 Fifth Wheel Kingpin, Heavy-Duty--Commercial Trailers and Semitrailers
SAE J700 Upper Coupler Kingpin--Commercial Trailers and Semitrailers
SAE J2228 Kingpin Wear Limits--Commercial Trailers and Semitrailers
SAE J1266 Axle Efficiency Test Procedure
SAE J336 Sound Level for Truck Cab Interior
SAE J2133 Disc Wheel Radial Runout Low Point Marking
SAE J1731 Pilot Bearings for Truck and Bus Applications
SAE J663 Rivets for Brake Linings and Bolts for Brake Blocks
SAE J393 Nomenclature--Wheels, Hubs, and Rims for Commercial Vehicles
SAE J1817 Long-Stroke Air-Brake Actuator Marking
SAE J851 Dimensions--Wheels for Demountable Rims, Demountable Rims,and Spacer Bands--Commercial Vehicles
SAE J624 Tapped and Flanged Exhaust Connections for Small Engines (Cancelled Jul 2001)
SAE J923 Nomenclature and Terminology for Truck and Bus Drive Axles
SAE J1802 Brake Block Effectiveness Rating
SAE J2024 Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices
SAE J24714 Fluid Systems--Connector Tubes--General Specification and Part Standard
SAE J1450 Air Brake Actuator Diaphragm Test Procedure
SAE J2014 Pneumatic Tires for Military Tactical Wheeled Vehicles
SAE J2318 Air Brake Actuator Test Performance Requirements
SAE J180 Electrical Charging Systems for Off Highway Work Machines
SAE J2174 Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width
SAE J1587 Electronic Data Interchange Between Microcomputer Systems in Heavy-Duty Vehicle Applications
SAE J749 Drawbars--Crawler Tractor (Cancelled Feb 2002, Superseded by ISO 6747)
SAE J733 Nomenclature--Rippers and Scarifiers (Cancelled Feb 2002, Superseded by ISO 6747)
SAE J729 Nomenclature and Specification Definitions--Dozers (Cancelled Feb 2002, Superseded by ISO 6747)
SAE J727 Nomenclature--Crawler Tractor (Cancelled Feb 2002, Superseded by ISO 6747)
SAE J1329 Minimum Performance Criteria for Braking Systems for Specialized Rubber- Tired, Self-Propelled Underground Min
SAE J2350 Electric Blower Motor Switch--Trucks, Buses, and Multipurpose Vehicles
SAE J2348 Electric Windshield Washer Switch--Trucks, Buses, and Multipurpose Vehicles
SAE J2349 Electric Windshield Wiper Switch--Trucks, Buses, and Multipurpose Vehicles
SAE J1306 Motorcycle Auxiliary Front Lamps
SAE J2406 CNG Powered Medium and Heavy Duty Trucks
SAE J1449 Small Craft--Graphic Symbols
SAE J1783 Ship Systems and Equipment--Selection of Hydraulic Directional Control Valves
SAE J1810 Electrical Indicating System Specification
SAE J1940 Small Engine Power and Torque Rating Procedure
SAE J2224 Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging
SAE J2233 Bus Body Heating System Test
SAE J2484 Fastener Part Standard--Machine Screws
SAE J1929 Flat Flywheels For Size 13 And 14 Spring Loaded Clutches (Cancelled Jul 2002)
SAE J1435 Guidelines For Rops And Fops Maintenance (Cancelled Jul 2002)
SAE J1408 Definitions and Glossary of Terms for Tower Cranes (Cancelled Jul 2002)
SAE J1358 Hydraulic Backhoe Basic Operating Control Arrangements (Cancelled Jul 2002)
SAE J2494/3 Performance Requirements for SAE J 844 Non-Metallic Air Brake Tubing and Push to Connect Fitting Assemblies
SAE J974 Flashing Warning Lamp for Agricultural Equipment
SAE J167 Overhead Protection for Agricultural Tractors--Test Procedures and Performance Requirements
SAE J1609 Air Reservoir Capacity Performance Guide--Commercial Vehicles
SAE J1356 Minimum Performance Criteria for Falling Object Guards for Excavators
SAE J2708 Agricultural Tractor Test Code (OECD) (Cancelled Aug 2002)
SAE J2461 Vehicle Electronic Programming Stations (VEPS) System Specification for Win32 TM
SAE J2194 Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
SAE J1307 Excavator and Backhoe Hand Signals
SAE J1084 Operator Protective Structure Performance Criteria for Certain Forestry Equipment
SAE J2245 Recommended Practice for Splash and Spray Evaluation
SAE J1119 Steel Products for Rollover Protective Structures (ROPS) and Falling Object Protective Structures (FOPS)
SAE J2711 Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty
SAE J2627 Commercial Vehicle Braking System Definitions
SAE J2494/2 Dimensional Specifications for Non-Metallic Body Push-To- Connect Fittings Used on a Vehicular Air Brake Sys
SAE J159 Rated Capacity Systems
SAE J1908 Electrical Grounding Practice
SAE J2497 Power Line Carrier Communications for Commercial Vehicles
SAE J1811 Power Cable Terminals
SAE J1197 Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast
SAE J284 Safety Alert Symbol for Agricultural, Construction, and Industrial Equipment
SAE J2321 Ship Systems and Equipment-- General Specification for Filter Elements--Hydraulic and Lube Oil Service
SAE J2030 Heavy-Duty Electrical Connector Performance Standard
SAE J956 Remote and Automatic Control Systems for Construction and Industrial Machinery (Cancelled Dec 2002)
SAE J1327 Fuel Fired Engine Preheaters and Their Application (Cancelled Dec 2002)
SAE J297 Operator Controls on Industrial Equipment
SAE J1051 Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
SAE J1493 Shielding of Starter System Energization
SAE J288 Snowmobile Fuel Tanks
SAE J276 Steering Frame Lock for Articulated Loaders and Tractors
SAE J2331 Operators Field of View--Engineering Evaluation
SAE J2121 Requirements for Composite Lighting Assemblies used on Construction and Industrial Machinery
SAE J1179 Hydraulic Excavator and Backhoe Digging Forces
SAE J584 Motorcycle Headlamps
SAE J2485 Fastener Part Standard - Machine Screw Nuts (Metric and Inch)
SAE J392 Motorcycle and Motor Driven Cycle Electrical System Maintenance of Design Voltage
SAE J958 Nomenclature and Dimensions for Crane Shovels
SAE J2571 Advanced Driver Interface Systems for Commercial Vehicle Operations
SAE J725 Mounting Brackets and Socket for Warning Lamp and Slow-Moving Vehicle (SMV) Identification Emblem (Cancelled Ja
SAE J1071 Operator Controls for Graders
SAE J682 Rear Wheel Splash and Stone Throw Protection
SAE J44 Service Brake System Performance Requirements--Snowmobiles
SAE J1282 Snowmobile Brake Control Systems
SAE J45 Brake System Test Procedure--Snowmobiles
SAE J192 Maximum Exterior Sound Level for Snowmobiles
SAE J2645 Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems
SAE J2418 Occupant Restraint System Evaluation--Frontal Impact Component-Level Heavy Trucks
SAE J1095 Spoke Wheels and Hub Fatigue Test Procedures
SAE J1042 Operator Protection for General-Purpose Industrial Machines
SAE J1814 Operator Controls--Off-Road Machines
SAE J2419 Occupant Restraint System Evaluation--Frontal Impact System--Level Heavy Trucks
SAE J1091 Earthmoving Machinery-Operator's Field of View
SAE J2424 Free Motion Headform Impact Tests of Heavy Truck Cab Interiors
SAE J662 Brake Block Chamfer
SAE J2426 Occupant Restraint System Evaluation--Lateral Rollover System--Level Heavy Trucks
SAE J1857 Flywheel Dimensions for Truck and Bus Applications
SAE J1463 Pull-Type Clutch Transmission Installation Dimensions
SAE J1341 Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses
SAE J1309 Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom
SAE J1860 Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics
SAE J1802/1 Test Component Specification
SAE J225 Brake Force Distribution Field Test Procedure for Truck and Bus
SAE J741 Capacity Rating--Scraper, Open Bowl (Cancelled May 2003, Superseded by ISO 6485)
SAE J1363 Capacity Rating--Dumper Body and Trailer Body (Cancelled May 2003, Superseded by ISO 6483)
SAE J1265 Capacity Rating--Dozer Blades (Cancelled May 2003, Superseded by ISO 9246)
SAE J1295 Identification Terminology and Specification Definitions--Pipelayers and Side Booms, Tractor or Loader Mounted
SAE J1234 Specification Definitions--Off-Road Work Machines (Cancelled May 2003, Superseded by ISO 6746-1)
SAE J897 Machine Slope Operation Test Code (Cancelled May 2003, Superseded by ISO 10266)
SAE J957 Capacity Rating--Elevating Scrapers (Cancelled May 2003, Superseded by ISO 6484)
SAE J43 Axle Application Load Rating for Industrial Wheel Loaders and Backhoe Loaders (Cancelled May 2003)
SAE J1092 Nomenclature?Industrial Tractors (General Purpose Wheel) (Cancelled May 2003)
SAE J1040 Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mi
SAE J94 Combination Tail and Floodlamp for Industrial Equipment (Cancelled May 2003)
SAE J716 Application of Hydraulic Remote Control to Agricultural Tractorsand Trailing Type Agricultural Implements (Canc
SAE J708 Agricultural Tractor Test Code (Cancelled May 2003)
SAE J2518 Lift Capacity Calculation Method Scrap and Material Handlers
SAE J115 Safety Signs
SAE J1150 Terminology for Agricultural Equipment (Cancelled May 2003)
SAE J1790 Self-Propelled Sweepers and Scrubbers Steering Requirements Single-Circuit Hydraulic Servo-Assisted Systems
SAE J99 Lighting and Marking of Industrial Equipment on Highways
SAE J833 Human Physical Dimensions (Cancelled May 2003, Superseded by ISO 3411)
SAE J185 Access Systems for Off-Road Machines
SAE J1446 On-Machine Alarm Test and Evaluation Procedure for Construction and General Purpose Industrial Machinery (Canc
SAE J1579 Motorcycle Side Stand Retraction Performance Requirements
SAE J38 Lift Arm Support Device for Loaders (Cancelled Jun 2003, Superseded by ISO 10533)
SAE J987 Lattice Boom Cranes Method of Test
SAE J1965 Road Vehicles?Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles?Fixing Nuts?Test Methods
SAE J2270 Ship Systems and Equipment--Threaded Fasteners--Inspection, Test, and Installation Requirements
SAE J1382 Classification, Nomenclature, and Specification Definitionsfor Trenching Machines (Cancelled Jun 2003, Superse
SAE J821 Electrical Wiring Systems for Construction, Agricultural, and Off-road Machines (Cancelled Jun 2003)
SAE J214 Hydraulic Cylinder Test Procedure (Cancelled Jun 2003)
SAE J1911 Test Procedure for Air Reservoir Capacity--Highway Type Vehicles
SAE J1388 Personnel Protection - Skid Steer Loaders
SAE J131 Motorcycle Turn Signal Lamps
SAE J1846 Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
SAE J2378 Test Procedure for Trailer Air Reservoir Fill and Parking Brake Release Times
SAE J609 Mounting Flanges and Power Take-Off Shafts for Small Engines
SAE J1823 Specification Definitions-Articulated Rubber-Tired Forwarder (Cancelled Jul 2003, Superseded by ISO 13860)
SAE J1110 Specification Definitions-Articulated Rubber-Tired Log Skidder (Cancelled Jul 2003, Superseded by ISO 13861)
SAE J2330 Walk-Along Work Machines?Braking Systems?Performance Requirements and Test Procedures
SAE J1272 Felling Head Terminology and Nomenclature
SAE J2662 Torque Ratings for Power Take-Off Mounting Pads
SAE J2606 Drain and Fill Plug for Use on Engines, Transmissions, and Axles
SAE J198 Windshield Wiper Systems--Trucks, Buses, and Multipurpose Vehicles
SAE J1444 Procedure for Evaluating Transient Response of Small Engine Driven Generator Sets
SAE J849 Connection and Accessory Locations for Towing Multiple Trailers
SAE J706 Rating of Winches
SAE J702 Brake and Electrical Connection Locations-Truck-Tractor and Truck-Trailer
SAE J1578 Motorcycle Side Stand Retraction Test Procedure
SAE J1340 Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses
SAE J1970 Shoreline Sound Level Measurement Procedure for Recreational Motorboats
SAE J1854 Brake Force Distribution Performance Guide-Truck and Bus
SAE J1299 Electrical Propulsion Control-Off-Road Dumpers
SAE J2655 Fastener Part Standard-Washers and Lock Washers (Inch Dimensioned)
SAE J2656 Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned
SAE J2608 Off Throttle Steering Capabilities of Personal Watercraft
SAE J1859 Test Procedures for Determining Air Brake Valve Input-Output Characteristics
SAE J2188 Commercial Truck and Bus SAE Recommended Procedure for Vehicle Performance Prediction and Charting
SAE J1334 Hydraulic Cylinder Integrity Test
SAE J2638 Fifth Wheel and Gooseneck Attachment Performance Up to 13 608/Kg (30 000/Lb) Trailer Gvw
SAE J2006 Marine Exhaust Hose
SAE J133 Fifth Wheel Kingpin Performance--Commercial Trailers and Semitrailers
SAE J994 Alarm-Backup-Electric Laboratory Performance Testing
SAE J1112 Specification Definitions-Skidder-Grapple (Cancelled Nov 2003, Superseded by ISO 13861)
SAE J1385 Classification of Earthmoving Machines for Vibration Tests of Operator Seats (Cancelled Nov 2003, Superseded b
SAE J2258 Light Utility Vehicles
SAE J2422 Cab Roof Strength Evaluation--Quasi-Static Loading Heavy Trucks
SAE J2420 COE Frontal Strength Evaluation-Dynamic Loading Heavy Trucks
SAE J1362 Graphical Symbols for Operator Controls and Displays on Off-Road Self- Propelled Work Machines
SAE J2536 Anti-Lock Brake System (ABS) Road Test Evaluation Procedure forTrucks, Truck-Tractors and Buses
SAE J2567 Measurement of Exhaust Sound Levels of Stationary Snowmobiles
SAE J2421 COE Frontal Strength Evaluation?Quasi-Static (Cancelled Jan 2004)
SAE J2423 Cab Roof Strength Evaluation?Dynamic Loading Heavy Trucks (Cancelled Jan 2004)
SAE J213 Motorcycle Classifications
SAE J68 Tests for Snowmobile Switching Devices and Components*HS-34/00*
SAE J1611 Operator Controls-Horizontal Earthboring Machines
SAE J2675 Combined Cornering and Braking Test for Truck Tires
SAE J1161 Operational Sound Level Measurement Procedure for Snowmobiles
SAE J560 Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable
SAE J1505 Brake Force Distribution Test Procedure-Trucks and Buses
SAE J2673 Straight-Line Braking Test for Truck and Bus Tires
SAE J2429 Free-Rolling Cornering Test for Truck and Bus Tires
SAE J572 Requirements for Sealed Lighting Unit for Construction and Industrial Machines
SAE J990 Nomenclature--Industrial and Agricultural Mowers
SAE J2202 Heavy-Duty Wiring Systems for On-Highway Trucks
SAE J1835 Fastener Hardware for Wheels for Demountable Rims
SAE J98 Personnel Protection for General Purpose Industrial Machines
SAE J397 Deflection Limiting Volume-Protective Structures Laboratory Evaluation
SAE J1824 Specification Definitions-Clam Bunk Skidder
SAE J1001 Industrial Flail Mowers and Power Rakes
SAE J1158 Specification Definitions-Winches for Crawler Tractors and Skidders
SAE J1014 Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors
SAE J1683 MS-DOS? Interface for SAE J1708 Communications (Cancelled Jun 2004)
SAE J2214 Vehicle Electronic Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly
SAE J1171 External Ignition Protection of Marine Electrical Devices
SAE J1320 Marine Electrical Switches
SAE J1286 Thrust Test Device
SAE J2271 Ship Systems and Equipment?Part Standard for Studs--Continuous and Double End (Inch Series)
SAE J2271M Ship Systems and Equipment--Part Standard for Studs--Continuous and Double End (Metric)
SAE J1775 Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft
SAE J553 Circuit Breakers
SAE J2055 Identification Terminology and Component Nomenclature Knuckle Boom Log Loader (Cancelled Jun 2004, Superseded
SAE J1209 Identification Terminology of Mobile Forestry Machines (Cancelled Jun 2004, Superseded by ISO 6814)
SAE J1394 Metric Nonmetallic Air Brake System Tubing
SAE J2425 Steering Control Systems--Laboratory Test Procedure Heavy Trucks
SAE J772 Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs
SAE J2005 Stationary Sound Level Measurement Procedure for Recreational Motorboats
SAE J1730 ABS Excitor Ring Location Standardization
SAE J1708 Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications
SAE J294 Service Brake Structural Integrity Test Procedure-Vehicles Over 4500 kg (10 000 lb) GVWR
SAE J2469 Clutch Application Powertrain Startability Rating Requirements for Truck and Bus Applications
SAE J2403 Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature
SAE J2494/1 Dimensional Specifications for Metallic Body Push-To-Connect Fittings Used on a Vehicle Air Brake System
SAE ICS1000 Recreation Off-Road Vehicle Product Identification Numbering System
SAE J2333 Ship Systems and Equipment-Hydraulic Systems-Filter Selection Parameters
SAE J1503 Performance Test for Air-Conditioned, Heated, and Ventilated Off-Road Self-Propelled Work Machines
SAE J1625 Heavy-Duty Circuit Breakers
SAE J1487 Rating Air-Conditioner Evaporator Air Delivery and Cooling Capacities
SAE J1160 Operator Ear Sound Level Measurement Procedure for Snow Vehicles (Cancelled Sep 2004)
SAE J268 Rear View Mirrors-Motorcycles
SAE J378 Marine Propulsion System Wiring
SAE J1464 Identification Terminology of Loaders/Tractors with Forks and Rough Terrain Forklifts (Cancelled Oct 2004)
SAE J2596 Fastener Part Standard--Tapping Screws and Metallic Drive Screws (Inch Dimensioned)
SAE J844 Nonmetallic Air Brake System Tubing
SAE J277 Maintenance of Design Voltage-Snowmobile Electrical Systems
SAE J1842 Disc Wheel Hub/Spoke Wheel and Axle Interface Dimensions--Commercial Vehicles
SAE J1116 Categories of Off-Road Self-Propelled Work Machines
SAE J917 Marine Push-Pull Control Cables
SAE J2580 Identification and Installation of Air Brake System Components
SAE J2475 Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus
SAE J47 Maximum Sound Level Potential for Motorcycles
SAE J756 Marine Propeller-Shaft Couplings (Cancelled Apr 2005)
SAE J3046/1 Reciprocating Internal Combustion Engines--Performance--Part 1: Standard Reference Conditions, Declarations
SAE J1776 Marine Vehicles - Hydraulic Pumps - Design and Specification Guide
SAE J1928 Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
SAE J34 Exterior Sound Level Measurement Procedure for Pleasure Motorboats
SAE J2695 Heavy Duty Vehicle Lubricating Greases
SAE J2363 Lubricating Oil for Wheeled Military Vehicles with Heavy-Duty Diesel Engines
SAE J1191 High Tension Ignition Cable Assemblies - Marine
SAE J96 Flashing Warning Lamp for Industrial Equipment
SAE J1097 Hydraulic Excavator Lift Capacity Calculation and Test Procedure
SAE J1621 Engine Retarder Dynamometer Test and Capability Rating Procedure
SAE J2321/1 Disposable Hydraulic Filter Element--115 L/min Flow, 1.0 MPa Collapse Pressure, Filtration Ratio = 75 at 6 a
SAE J2321/3 Disposable Hydraulic Filter Elements--21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 μm, 75 to 175 L/
SAE J2321/2 Disposable Hydraulic Filter Element--190 L/min Flow, 21 MPa Collapse Pressure, Filtration Ratio = 75 at 7 μm
SAE J2384 Air Dryer Test Procedure
SAE J1428 Marine Circuit Breakers
SAE J386 Operator Restraint System for Off-Road Work Machines
SAE J764 Loading Ability Test Procedure--Scrapers
SAE J740 Countersunk Square Holes for Cutting Edges and End Bits
SAE J1581 Cutting Edge-Optional Cross-Sections and Dimensions Loader Straight
SAE J1360 Product Identification Numbering System of Off-Road Work Machines
SAE J1304 Cutting Edge-Cross Sections Loader Straight with Bolt Holes
SAE J88 Sound Measurement--Off-Road Work Machines--Exterior
SAE J280 Snowmobile Headlamps
SAE J278 Snowmobile Stop Lamp
SAE J279 Snowmobile Tail Lamp (Rear Position Lamp)
SAE J2295 Fastener Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Inch Dimensioned)
SAE J2685 Positive Temperature Coefficient Overcurrent Protection Devices (PTCs)
SAE J1671 Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus
SAE J1454 Dynamic Durability Testing of Seat Cushions for Off-Road Work Machines
SAE J753 Maintenance Interval Chart
SAE J371 Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines
SAE J1469 Air Brake Actuator Test Procedure, Truck-Tractor, Bus, and Trailers
SAE J1455 Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications
SAE J2295M Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)
SAE J1527 Marine Fuel Hoses
SAE J2664 Trailer Sway Response Test Procedure
SAE J292 Snowmobile and Snowmobile Cutter Lamps, Reflective Devices, and Associated Equipment
SAE J2305 Hazard Reduction for Horizontal Earthboring Machines
SAE J176 Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines
SAE J1939/2 Agricultural and Forestry Off-Road Machinery Control and Communication Network
SAE J2115 Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer
SAE J1472 Braking Performance - Rollers
SAE J1624 Fuel Crossover Line
SAE J2503 Drawbar Pull Performance Criteria
SAE J1105 Horn - Forward Warning - Electric - Performance, Test, and Application
SAE J1062 Snowmobile Passenger Handgrips
SAE J2474 Self Propelled Sweepers and Scrubbers Battery Run-Time
SAE J1793 Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating
SAE J703 Fuel Systems - Truck and Truck Tractors
SAE J2470 Hydraulic Fluid Power - Valves - Method for Assessing the Lock Sensitivity to Contaminants
SAE J1778 Ship Systems and Equipment - Recommended Practice for Hydraulic Fluid Selection
SAE J1782 Ship Systems and Equipment - Hydraulic Systems - Noise Control
SAE J1577 Replaceable Motorcycle Headlamp Bulbs
SAE J1781 Ship Systems and Equipment - Materials for Fluid Systems
SAE J2292 Combination Pelvic/Upper Torso (Type 2) Operator Restraint Systems for Off-Road Work Machines
SAE J1163 Determining Seat Index Point
SAE J1177 Hydraulic Excavator Operator Controls
SAE J1223 Marine Carburetors and Fuel Injection Throttle Bodies
SAE J1527 Marine Fuel Hoses
SAE J1362 Graphical Symbols for Operator Controls and Displays on Off-Road Self-Propelled Work Machines
SAE J1861 Air Brake Valve Input-Output Characteristic Requirements
SAE J1168 Motorcycle Bank Angle Measurement Procedure
SAE J95 Headlamps for Industrial Equipment
SAE J1029 Lighting and Marking of Construction, Earthmoving Machinery
SAE J64 Vehicle Identification Numbers--Snowmobiles (Cancelled Feb 2007)
SAE J2496 Transport Area Network Cabling (NONCURRENT Feb 2007)
SAE J179 Labeling--Disc Wheels and Demountable Rims--Trucks
SAE J1222 Speed Control Assurance for Snowmobiles
SAE J1038 Recommendations for Children's Snowmobile
SAE J1069 Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines
SAE J31 Hydraulic Backhoe Lift Capacity
SAE J818 Rated Operating Load for Loaders
SAE J732 Specification Definitions - Loaders
SAE J876 Wide Base Disc Wheels and Demountable Rims
SAE J48 Guidelines for Liquid Level Indicators
SAE J2267 Minimum Performance Criteria for Operator Front Protective Structure (OFPS) for Certain Equipment
SAE J1792/2 Self-Propelled Sweepers--Air Flow Performance--Part 2: Suction/Blower Fan Performance
SAE J1792/1 Self-Propelled Sweepers--Air Flow Performance--Part 1: Suction Air Volume Performance
SAE J1791 Self-Propelled Sweepers and Scrubbers Dual Position Driving Controls and Displays
SAE J873 Drag Force Test Procedure for Construction, Forestry, and Industrial Machines (NONCURRENT May 2007)
SAE J899 Operator's Seat Dimensions for Off-Road Self-Propelled Work Machines
SAE J2030 Heavy-Duty Electrical Connector Performance Standard
SAE J1404 Service Brake Structural Integrity Requirements - Truck and Bus
SAE J2234 Equivalent Temperature - Truck and Bus
SAE J2754 Volumetric Rating of Excavator Mounted, Bucket Linkage Operated Grapples
SAE J2222 Coiled Electrical Cable - Truck and Bus
SAE J1067 Seven Conductor Cable - Truck and Bus
SAE J2497 Power Line Carrier Communications for Commercial Vehicles
SAE J694 Disc Wheel/Hub or Drum Interface Dimensions--Truck and Bus
SAE J2394 Seven Conductor Cable for ABS Power--Truck and Bus
SAE J1865 Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels in Drum Brake Applications - Truc
SAE J1149 Metallic Air Brake System Tubing and Pipe
SAE J2494/3 Performance Requirements for SAE J844 Non-Metallic Air Brake Tubing and Push to Connect Fitting Assemblies U
SAE J1451 A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycle
SAE J1353 Nomenclature--Clam Bunk Skidder
SAE J1354 Nomenclature--Forwarder
SAE J1254 Component Nomenclature--Feller Buncher
SAE J1109 Component Nomenclature--Articulated Log Skidder, Rubber-Tired
SAE J1111 Component Nomenclature--Skidder-Grapple
SAE J2549 Single Conductor Cable for Heavy-Duty Applications - Truck and Bus
SAE J739 Cutting Edge-Curved Grader (Cancelled Aug 2007, Superseded by ISO 7129)
SAE J737 Hole Spacing for Scraper and Dozer Cutting Edges (Cancelled Aug 2007, Superseded by ISO 7129)
SAE J731 Component Nomenclature--Loader (Cancelled Aug 2007, Superseded by ISO 7131)
SAE J2583 Directional Drilling Planning and Mapping Nomenclature
SAE J2519 Guidelines and Procedures for Directional Drilling Tracking Operators
SAE J2520 Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment
SAE J2022 Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines
SAE J851 Dimensions--Wheels for Demountable Rims, Demountable Rims, and Spacer Bands--Truck and Bus
SAE J2743 Air Compressor Size Rating Recommended Practice - Truck and Bus
SAE J2024 Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices - Truck and Bus
SAE J1789 Self-Propelled Sweepers and Scrubbers Braking Performance
SAE J1032 Definitions for Machine Availability (Off-Road Work Machines) (Cancelled Oct 2007, Superseded by ISO 8927)
SAE J1008 Sound Measurement--Self-Propelled Agricultural Equipment--Exterior (Cancelled Oct 2007, Superseded by ISO 7216
SAE J663 Rivets for Brake Linings and Bolts for Brake Blocks - Truck and Bus
SAE J1834 Seat Belt Comfort, Fit, and Convenience - Truck and Bus
SAE J1702 Self-Propelled Sweepers Sweep-Ability Performance
SAE J1801 Brake Effectiveness Marking for Brake Blocks--Truck and Bus
SAE J1075 Sound Measurement--Construction Site
SAE J2641 Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues
SAE J2542 Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines
SAE J2473 Self-Propelled Sweepers and Scrubbers--Maximum Gradient Rating During Hopper Discharge
GB/T 18878-2008 滑道设计规范--国家标准全文数据库
GB/T 18168-2008 水上游乐设施通用技术条件--国家标准全文数据库
GB 18168-2000 水上游乐设施通用技术条件--国家标准全文数据库
GB/T 20051-2006 无动力类游乐设施技术条件--国家标准全文数据库
GB/T 18162-2008 赛车类游艺机通用技术条件--国家标准全文数据库
GB 18164-2000 观览车类 游艺机通用技术条件--国家标准全文数据库
GB 18160-2000 陀螺类 游艺机通用技术条件--国家标准全文数据库
GB/T 18160-2008 陀螺类游艺机通用技术条件--国家标准全文数据库
GB 18167-2000 光电打靶类 游艺机通用技术条件--国家标准全文数据库
GB 18166-2000 架空游览车类 游艺机通用技术条件--国家标准全文数据库
GB/T 18166-2008 架空游览车类游艺机通用技术条件--国家标准全文数据库
GB 18158-2000 转马类 游艺机通用技术条件--国家标准全文数据库
GB/T 18158-2008 转马类游艺机通用技术条件--国家标准全文数据库
GB 18161-2000 飞行塔类 游艺机通用技术条件--国家标准全文数据库
GB/T 18161-2008 飞行塔类游艺机通用技术条件--国家标准全文数据库
GB/T 18165-2008 小火车类游艺机通用技术条件--国家标准全文数据库
GB 18165-2000 小火车类 游艺机通用技术条件--国家标准全文数据库
GB 18162-2000 赛车类 游艺机通用技术条件--国家标准全文数据库
GB/T 18159-2008 滑行车类游艺机通用技术条件--国家标准全文数据库
GB 18159-2000 滑行类 游艺机通用技术条件--国家标准全文数据库
GB/T 18169-2008 碰碰车类游艺机通用技术条件--国家标准全文数据库
GB 18169-2000 碰碰车类 游艺机通用技术条件--国家标准全文数据库
GB/T 18170-2008 电池车类游艺机通用技术条件--国家标准全文数据库
GB 18170-2000 电池车类 游艺机通用技术条件--国家标准全文数据库
GB 18163-2000 自控飞机类 游艺机通用技术条件--国家标准全文数据库
GB/T 18164-2008 观览车类游艺机通用技术条件--国家标准全文数据库
GB/T 18167-2008 光电打靶类游艺机通用技术条件--国家标准全文数据库
GB/T 18163-2008 自控飞机类游艺机通用技术条件--国家标准全文数据库
GB/T 9832-2007 毛绒、布制玩具--国家标准全文数据库
GB 13472-1992 BMX 儿童自行车安全要求--国家标准全文数据库
GB 14748-2006 儿童推车安全要求--国家标准全文数据库
GB 14747-1993 儿童三轮车安全要求--国家标准全文数据库
GB 14748-1993 儿童推车安全要求--国家标准全文数据库
GB 14747-2006 儿童三轮车安全要求--国家标准全文数据库
GB 14746-1993 儿童自行车安全要求--国家标准全文数据库
GB 14746-2006 儿童自行车安全要求--国家标准全文数据库
GB 14749-1993 婴儿学步车安全要求--国家标准全文数据库
GB 14749-2006 婴儿学步车安全要求--国家标准全文数据库
GB 8408-2000 游艺机和游乐设施安全--国家标准全文数据库
GB/T 18879-2002 滑道安全规范--国家标准全文数据库
GB 9832-1993 毛绒、布制玩具安全与质量--国家标准全文数据库
GB 6675-2003 国家玩具安全技术规范--国家标准全文数据库
GB/T 8973-2000 机动玩具 机芯型号编制方法--国家标准全文数据库
GB/T 21268-2007 非公路用旅游观光车通用技术条件--国家标准全文数据库
GB/T 20050-2006 游乐设施检验验收--国家标准全文数据库
GB/T 20049-2006 游乐设施代号--国家标准全文数据库
GB 8408-2008 游乐设施安全规范--国家标准全文数据库
GB/T 14625.4-1995 篮球、足球、排球、手球试验方法 试验条件与试样准备--国家标准全文数据库
GB/T 14625.3-2008 篮球、足球、排球、手球试验方法 第3部分:动态耐冲击试验方法--国家标准全文数据库
GB/T 23115-2008 乒乓球拍--国家标准全文数据库
GB/T 180-1998 乒乓球--国家标准全文数据库
GB/T 21502-2008 发令器--国家标准全文数据库
GB/T 21503-2008 发令弹--国家标准全文数据库
GB/T 11881-2006 羽毛球--国家标准全文数据库
GB/T 11881-1989 羽毛球--国家标准全文数据库
GB 14630-1993 猎枪--国家标准全文数据库
GB 14632-1993 猎枪金属弹壳--国家标准全文数据库
GB/T 18266.1-2000 体育场所等级的划分 第1部分:保龄球馆星级的划分及评定--国家标准全文数据库
GB 14631-1993 猎枪底火--国家标准全文数据库
GB/T 14625.5-1995 篮球、足球、排球、手球圆周长、圆周差的测量--国家标准全文数据库
GB 14918-1994 信号枪通用技术条件--国家标准全文数据库
GB/T 14658-1993 民用枪械术语--国家标准全文数据库
GB/T 14657-1993 民用枪弹术语--国家标准全文数据库
GB/T 14625.1-1993 篮球、足球、排球、手球圆度测定方法--国家标准全文数据库
总计406626个记录,共407页。 第一页 上一页 下一页 最末页