ISO 3547-5-2007 滑动轴承.卷制轴衬.第5部分:外径检验
ISO 3547-7-2007 滑动轴承.卷制轴衬.第7部分:薄壁轴衬壁厚的测量
ISO 12301-2007 滑动轴承.几何和材料质量特征的质量控制技术和检验
ISO 17165-1-2007 液压传动.软管组件.第1部分:尺寸和要求
ISO 7789-2007 液压传动.二通、三通和四通螺纹式插装阀.插装孔
ISO 4126-4 Technical Corrigendum 1-2007 防过压保护安全装置.第4部分:液压控制安全阀.技术勘误1
ISO 4126-1 Technical Corrigendum 1-2007 防过压保护安全装置.第1部分:安全阀.技术勘误1
ISO 1224-2-2007 滚动轴承.仪器精密轴承.第2部分:英寸系列轴承边界尺寸、公差和特征
ISO 6281-2007 滑动轴承.试验机内流体动压和混合润滑条件下的测试
ISO 1224-1-2007 滚动轴承.仪器精密轴承.第1部分:米制系列轴承边界尺寸、公差和特征
ISO 18185-5-2007 货运集装箱.电子密封.第5部分:物理层
ISO 18185-4-2007 货运集装箱.电子密封.第4部分:数据保护
ISO 18185-1-2007 货运集装箱.电子密封.第1部分:通信协议
ISO 18185-2-2007 货运集装箱.电子密封.第2部分:应用要求
ISO 18172-2-2007 储气瓶.可再灌装的焊接不锈钢气瓶.第2部分:试验压力大于6MPa
ISO 18172-1-2007 储气瓶.可再灌装的焊接不锈钢气瓶.第1部分:试验压力≤6MPa
ISO 1088-2007 液体比重测定法.使用测流计的速度面积法.流量测量中不确定度测定用数据收集和处理
ISO 16883-2007 包装.危险物品运输包装件.大包装试验方法
ISO 21013-2-2007 低温容器.低温设施用卸压附件.第2部分:打开后不能重新盖紧的卸压装置
ISO/TR 9824-2007 水文测量学.封闭管道中自由表面流动的测量
ISO 16673-2007 道路车辆.运输信息和控制系统的人类工效学方面.阻塞法评定使用车内系统产生的视觉需求
ISO/PAS 20282-4-2007 日用品的易操作性.第4部分:消费品的安装用试验方法
ISO/PAS 20282-3-2007 日用品的易操作性.第3部分:消费品的试验方法
ISO/TR 25417-2007 声学.基本参量的定义和术语
ISO 5130-2007 声学.平稳道路车辆发射声压级的测量
ISO 17858-2007 水质.测定类似二氧(杂)芑的多氯联苯.使用气相色谱/质谱测量法
ISO 10703-2007 水质.放射性核辐射活性浓度的测定.高分辨率γ光谱测定法
ISO 12460-1-2007 木基板材.甲醛释放的测定.第1部分:用1立方米试验室法测定甲醛排放
ISO 9874 Technical Corrigendum 1-2007 牛奶.总磷含量的测定.用分子吸收光谱法.技术勘误1
ISO 5355 Technical Corrigendum 1-2007 高山滑雪靴.要求和试验方法.技术勘误1
ISO 8070-2007 牛奶和奶制品.钙、钠、钾和镁含量测定.原子吸收光谱测定法
ISO 22891-2007 纸.通过漫反射系数测量测定透过率
ISO 21016-2007 办公家具.桌子和写字台.稳定性、强度和耐久性测定的试验方法
ISO 11815-2007 牛奶.反刍动物干胃膜对奶制品凝结活性测定
ISO 6452-2007 橡胶或塑料涂层织物.汽车内装饰材料雾气凝结特征的测定
ISO 21015-2007 办公家具.办公椅子.测定稳定性、强度和耐久性的试验方法
ISO 15360-2 Technical Corrigendum 1-2007 再生纸浆.粘性和塑性评估.第2部分:图象分析法.技术勘误1
ISO 12465-2007 胶合板.规范
ISO 23733-2007 纺织品.绳绒线.测定线密度的试验方法
ISO 105-C12 Technical Corrigendum 1-2007 纺织品.色牢度试验.第C12部分:耐工业洗涤的色牢度.技术勘误1
ISO 11634 Technical Corrigendum 1-2007 滑雪板-鞋靴.有滑雪板口拴接口.技术勘误1
ISO 14790 Technical Corrigendum 1-2007 无释放机制的滑雪板口拴.要求和试验方法
ISO 18692-2007 海上看守岗用纤维绳.聚酯
ISO 23714-2007 纸浆.测定保水值(WRV)
ISO 14156 AMD 1-2007 奶和奶制品.脂类和脂溶性化合物的萃取方法
ISO/TR 20432-2007 土壤加固用土工布的长期加固强度的测定指南
ISO 17812-2007 纸、纸板和纸浆.镁总含量、钙总含量、锰总含量、铁总含量和铜总含量的测定
ISO 5350-3-2007 纸浆.污物和碎片的评估.第3部分:使用反射光的等值黑色面积(EBA)法进行目视检验
ISO 2846-2-2007 印刷技术.四色印刷油墨的颜色和透明度.第2部分:冷固型油墨胶印
ISO 2834-2-2007 印刷技术.试验印件的实验室制备.第2部分:液态印刷油墨
ISO 8791-4-2007 纸和纸板.粗糙度/平滑度的测定(空气泄漏法).第4部分:印刷面法
ISO 16322-2 Technical Corrigendum 1-2007 织物.洗涤后的螺旋形测定.第2部分:机织物和针织物.技术勘误1
ISO 18695-2007 纺织物.防水渗透的测定.渗透作用试验
ISO 12466-2-2007 胶合板.胶合质量.第2部分:要求
ISO 12466-1-2007 胶合板.胶合质量.第1部分:试验方法
ISO 2892-2007 奥氏体铸铁.分类
ISO 13947-2007 金属粉末.用铸造粉末样品测定金属粉末中非金属夹杂物的试验方法
ISO 7267-3-2007 橡胶涂覆滚柱.表观硬度测定.第3部分:普西-琼斯(Pusey和Jones)法
ISO 16220 AMD 1-2007 镁和镁合金.镁合金铸锭和铸件.修改件1:附加合金
ISO 3116-2007 镁和镁合金.锻造的镁合金
ISO 13950-2007 塑料管和配件.电熔焊接头的自动识别系统
ISO 4996-2007 高屈服应力结构质量的热轧薄钢板
ISO 4997-2007 结构质量的冷轧碳素薄钢板
ISO 10791-10-2007 机械加工中心的试验条件.第10部分:热畸变的评定
ISO 2351-1-2007 螺钉和螺母用装配工具.机动旋具头.第1部分:一字槽头螺钉用旋具头
ISO/TS 13399-3-2007 切削工具数据表示和交换.第3部分:工具项用参考字典
ISO/TS 13399-4-2007 切削工具数据表示和交换.第4部分:自适应项的参考字典
JIS K6329 AMD 2-2006 再生轮胎(修改件2)
JIS K6327 AMD 1-2006 橡胶线(修改件1)
JIS K6313 AMD 1-2006 再生橡胶(修改件1)
JIS D6403 AMD 1-2006 工业车辆用轮胎(修改件1)
JIS K7249-2006 硬质泡沫塑料.尺寸稳定性测定
JIS K7315-2-2006 塑料.聚苯硫(PPS)模塑化合物.第2部分:试样的制备和特性的测定
JIS K7315-1-2006 塑料.聚苯硫(PPS)模塑化合物.第1部分:命名体系及基本规范
JIS K6938-1-2006 塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模塑和挤制材料.第1部分:命名体系和基本规范
JIS K6934-1-2006 塑料.丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤塑材料.第1部分:命名体系和基本规范
JIS K6876-1-2006 塑料.丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙烯(ACS)模塑和挤塑材料.第1部分:命名体系和基本规范
JIS K6717-2-2006 塑料.聚甲基丙烯酸甲酯模塑和压塑材料.第2部分:试验样品的制备和特性的测定
JIS K6717-1-2006 塑料.聚甲基丙烯酸甲酯模塑和压塑材料.第1部分:命名体系和基本规范
JIS K6230-2006 橡胶.鉴定.红外分光光谱法
JIS K6267-2006 硫化或热塑橡胶.污斑特征测定
JIS K6262-2006 硫化或热塑橡胶.在常温、高温或低温下的压缩永久变形测定
JIS K6273-2006 硫化或热塑性橡胶.张力变形、伸长率和蠕变的测定
JIS K6261-2006 硫化或热塑橡胶.低温特征的测定
JIS B8650-2006 塑料制模机械.词汇
JIS S6040 AMD 1-2006 普通工作用粘接剂(修改件1)
JIS K8392 AMD 1-2006 水杨酸(修改件1)
JIS K8253 AMD 1-2006 过硫酸钾(修改件1)
JIS K6931 AMD 1-2006 再生塑料棒材、杆材、板材和桩柱(修改件1)
JIS K6914 AMD 1-2006 叠层热固性聚合物管件(修改件1)
JIS K6913 AMD 1-2006 叠层热固性聚合物棒材(修改件1)
JIS K6911 AMD 1-2006 热固性塑料的试验方法(修改件1)
JIS K6800 AMD 1-2006 胶粘剂和粘着力的术语汇编(修改件1)
JIS K6912 AMD 1-2006 叠层热固性薄板材(修改件1)
JIS K6727 AMD 1-2006 苯乙烯(修改件1)
JIS K1524 AMD 1-2006 丁酮(修改件1)
JIS K1522 AMD 1-2006 异丙醇(修改件1)
JIS K0518 AMD 1-2006 高纯度烃凝固点的试验方法(修改件1)
JIS K9798-2006 未增塑聚氯乙烯(PVC-U)的可再生发泡芯材三层管
JIS K9797-2006 未增塑聚氯乙烯(PVC-U)的可再生固体堆蕊三层管
JIS K7138-2006 硬质泡沫塑料.开口和封闭气室容积百分数测定
JIS R3421-2006 集尘器用纺织玻璃纤维成品布
JIS R3420-2006 纺织玻璃纤维制品的试验方法
JIS R3414-2006 纺织玻璃纤维织物
JIS R3413-2006 纺织玻璃纤维纱
JIS R3412-2006 纺织玻璃纤维粗纱
JIS R3411-2006 纺织玻璃短纤维闷光织物
JIS K7220-2006 硬质泡沫塑料.压缩性能的测定
JIS K7221-1-2006 硬质泡沫塑料.弯曲性能的测定.第1部分:基本弯曲试验
JIS K7221-2-2006 硬质泡沫塑料.弯曲性能的测定.第2部分:挠曲强度和弹性的表面弯曲模量的测定
JIS K7211-2-2006 塑料.硬质塑料冲孔性能的测定.第2部分:仪器冲击试验
JIS K7211-1-2006 塑料.硬质塑料耐冲孔性能的测定.第1部分:非仪器冲击试验
JIS K7126-2-2006 塑料.薄膜和薄板.气体传输率的测定.第2部分:等压法
JIS R3802 AMD 1-2006 化工装置的玻璃构件(修改件1)
JIS K7126-1-2006 塑料.薄膜和薄板.气体传输率的测定.第1部分:压差法
JIS K8951-2006 硫酸
JIS K8574-2006 氢氧化钾
JIS K8247-2006 高锰酸钾
JIS K1101-2006 氧
JIS R1671-2006 多孔精细陶瓷液压当量直径和水渗透性的试验方法
JIS R1672-2006 用微分扫描热量测定法测定光纤加固型陶瓷复合材料比热.
JIS R1302 AMD 1-2006 化学分析用瓷蒸发皿(修改件1)
JIS B8392-6-2006 压缩空气.第6部分:气体污染物含量的试验方法
JIS K1410 AMD 1-2006 氧化锌
JIS K1475 AMD 1-2006 供水系统用聚氯化铝(修改件1)
JIS K1450 AMD 1-2006 供水系统用硫酸铝(修改件1)
JIS K1404 AMD 1-2006 重铬酸钾(修改件1)
JIS K1403 AMD 1-2006 重铬酸钠二水合物(修改件1)
JIS K1402 AMD 1-2006 三氧化铬(修改件1)
JIS K1401 AMD 1-2006 三氧化二铬(修改件1)
JIS R3410-2006 与纺织玻璃纤维有关的术语汇编
JIS R1702-2006 精细陶瓷(高级陶瓷、高级工业陶瓷).光致辐照和效验下光催化产品抗菌活性的试验方法
JIS R1670-2006 精细陶瓷微观结构中粒度的试验方法
JIS R1669-2006 精细陶瓷.滚动轴承球的氮化硅材料的基本特征和分类
JIS K0123-2006 气相/色谱质谱法通则
JIS K0121-2006 原子吸收光谱化学测定法通用规则
JIS K0213-2006 分析化学术语(电化学部分)
JIS K0214-2006 分析化学的技术术语(光谱部分)
JIS Z9015-1-2006 计数抽样检验程序.第1部分:用于逐批检验按可接受质量界限(AQL)检索的抽样计划
JIS Z8101-3 AMD 1-2006 统计学.术语和符号.第3部分:实验设计(修改件1)
JIS X7112-2006 地理信息.根据地理标识符的空间定位
JIS C9335-2-203 AMD 1-2006 家用和类似用途电器的安全. 第2-203部分:电anka的特殊要求
JIS H5121-2006 铜合金连续浇铸件
JIS H5120-2006 铜和铜合金铸件
JIS H4301 AMD 1-2006 铅和铅合金薄板和板(修改件1)
JIS H2202-2006 铸造用铜合金锭
JIS H3300-2006 铜和铜合金无缝钢管
JIS C6950-2006 信息技术设备安全性
JIS C8473-2006 照明用汇流条通道.电源用途的特殊安全要求.第1部分:一般要求
JIS Z2616 AMD 1-2006 金属材料中硫的测定通则(修改件1)
JIS Z2615 AMD 1-2006 金属材料中碳的测定通则(修改件1)
JIS K1503 AMD 1-2006 丙酮(修改件1)
JIS C9745-1 AMD 1-2006 手持式电动工具的安全.第1部分:一般要求(修改件1)
JIS Z3313 AMD 1-2006 低碳钢、高强度钢和低温钢用气保护和自保护金属电弧焊用管状焊丝(修改件1)
JIS Z3312 AMD 1-2006 低碳钢及高强度钢用金属极活性气体保护电弧实芯焊丝(修改件1)
JIS C8117 AMD 1-2006 荧光灯用交流电子镇流器(修改件1)
JIS C8112 AMD 1-2006 学习用台式荧光灯(修改件1)
JIS R7601 AMD 1-2006 碳素纤维的试验方法(修改件1)
JIS A9511-2006 预制泡沫塑料绝热材料
JIS A5759 AMD 1-2006 门窗玻璃安装用粘合薄膜(修改件1)
JIS A1481-2006 建筑材料产品中石棉测定
JIS K2437 AMD 1-2006 酚类(酚、甲酚及甲苯基酸、二甲苯酚)(修改件1)
JIS F7335 AMD 1-2006 造船.软管连接件和管件(修改件1)
JIS K6932 AMD 1-2006 勘测和边界用的再生塑料标识桩(修改件1)
JIS C9335-2-212 AMD 1-2006 家用和类似用途电器的安全.第2-212部分:家用汽化器的特殊要求(修改件1)
JIS C9335-2-211 AMD 1-2006 家用和类似用途电器的安全.第2-211部分:家用热理疗仪的特殊要求(修改件1)
JIS C9335-2-210 AMD 1-2006 家用和类似用途电器的安全.第2-210部分:家用磁感应理疗仪的特殊要求(修改件1)
JIS C9335-2-209 AMD 1-2006 家用和类似用途电器的安全.第2-209部分:家用电子理疗仪的特殊要求(修改件1)
JIS S2070-2006 燃气和燃油器具达到的能效标准百分比的计算及表示方法
JIS C9335-2-207 AMD 1-2006 家用和类似用途电器的安全. 第2-207部分:电解水生产装置的特殊要求(修改件1)
JIS Q17021-2007 合格评估.机构提供审核的要求和管理系统的认证
JIS C8280-2007 爱迪生螺口灯座
JIS C9335-2-101-2007 家用和类似电器的安全.第2-101部分:蒸发器的特殊要求
JIS Z3334 AMD 1-2007 电弧焊用镍和镍合金焊条和实心焊丝(修改件1)
JIS Z3317 AMD 1-2007 钼钢和铬钼铸钢用MAG焊接实心焊丝(修改件1)
JIS A1718 AMD 1-2007 浴缸的试验方法(修改件1)
JIS G4311 AMD 1-2007 耐热钢棒(修改件1)
JIS C8515-2007 原电池.物理和电器规范
JIS C8201-4-1-2007 低压开关装置和控制装置.第4部分:接触器和电机启动器.第1节:电动机械接触器和电机启动器
JIS C3663-1-2007 橡胶绝缘电缆.额定电压≤450/750V.第1部分:一般要求
JIS A1414 AMD 1-2007 建筑物结构用板的性能试验方法(修改件1)
JIS T8061-2007 血液和体液接触的防护用服装.血源性病原体渗透防护服装材料阻力的测定.用Phi-X174抗菌素的试验方法
JIS C9901-2007 电气和电子装置的能效达标百分率的计算方法和表达式
JIS G3317-2007 热浸镀锌-5%铝合金钢板和钢带
JIS G3321-2007 热浸镀55%铝-锌合金钢板和钢带
JIS G3313-2007 电解镀锌钢板和钢带
JIS G3302-2007 热浸镀锌钢板和钢带
JIS D9453-2007 自行车.载物架和支架
JIS C6065-2007 音频、视频和类似电子装置.安全要求
JIS C8285-1-2007 工业用插头、插座端口和连接件.第1部分:一般要求
JIS C8282-1-2007 家用和类似用途插头和插座端口.第1部分:一般要求
JIS C7709-0 AMD 2-2007 可转换性和安全性控制用带量规的灯头和灯座.第0部分:一般信息(修改件2)
JIS C8282-2-3-2007 家用和类似用途插头和插座端口.第2-3部分:固定装置用无]互锁的开关插座端口的特殊要求
JIS C8282-2-1-2007 家用和类似用途插头和插座端口.第2-1部分:保险丝的特殊要求
JIS C9335-2-209-2007 家用和类似用途电器的安全.第2-209部分:家用电子理疗仪的特殊要求
JIS C9108-2007 电动真空吸尘器
JIS Z3318 AMD 1-2007 钼钢和铬钼铸钢用MAG焊料带芯焊丝(修改件1)
JIS Z3224 AMD 1-2007 镍和镍合金涂覆电焊条(修改件1)
JIS K2203 AMD 1-2007 煤油(修改件1)
JIS K7139-2007 塑料.多用途试样
JIS C6185-2-2007 光时域反射计(OTDRs)的校准
JIS C6710-2007 晶体控制振荡器的一般规范
JIS C6701-2007 石英晶体元件的一般规范
JIS B8561-2007 自动售货机.试验方法
JIS C61000-4-7-2007 谐波和谐间波测量法和连接到供电系统和设备的测量器仪通用指南
JIS X4178-2007 XForms 1.0
JIS X4169-2007 可扩展设计转换语言(XSLT)版本1.0
JIS X4160-2007 可扩展标记路径语言(XPath)版本1.0
JIS S8604 AMD 1-2007 盒式录音带录制品(修改件1)
JIS X0160 AMD 1-2007 信息技术.软件生命周期过程(修改件1)
JIS X0221-2007 信息技术.通用多八位编码字符集(UCS)
JIS C61000-4-4-2007 电磁兼容性(EMC).第4-4部分:测试和测量技术.电快速瞬变/猝发抗扰度试验
JIS B8433-1-2007 工业机器人.安全要求.第1部分:机器人
JIS C6965-2007 阴极射线管的机械安全
JIS X6320-11-2007 识别卡.集成电路板.第11部分:使用生物统计法的个人认证
JIS B3511 AMD 1-2007 可编程控制器.现场网络标准(1级)(修改件1)
JIS B3512 AMD 1-2007 可编程控制器.现场网络标准的试验和检定(1级)(修改件1)
JIS X4177-2 AMD 1-2007 文献概要定义语言(DSDL).第2部分:基于规则文法的证实.RELAX NG(修改件1)
JIS X3005-13-2007 信息技术.数据库语言.SQL.第13部分:使用JavaTM程序设计语言的SQL例程和类型(SQL/JRT)
JIS C4411-2-2007 不间断电源系统(UPS).第2部分:电磁兼容性(EMC)的要求
JIS Q20000-2-2007 信息技术.服务管理.第2部分:实用规程
JIS Q20000-1-2007 信息技术.服务管理.第1部分:规范
JIS C5948-2007 通信用激光模块.可靠性评估
JIS C5953-3-2007 纤维光学有源元件和装置.性能标准.第3部分:2.5Gbit/s调制器集成的激光二极管发射机
JIS C5953-1-2007 纤维光学有源元件和装置.性能标准.第1部分:总则和指南
JIS C6122-10-1-2007 光学放大器.试验方法.第10-1部分:多道参数.利用光学开关和光谱分析仪的脉冲法
JIS C6121-5-2-2007 光纤放大器.第5-2部分:合格评定规范.光纤放大器用可靠性合格评定
JIS B3900-1-2007 工业自动化系统和集成.交替使用性的软件生产能力状况.第1部分:框架
JIS R1641-2007 微波频率下精细陶瓷片介电性能的试验方法
JIS X0523-2007 信息技术.自动识别和数据捕获技术.条形码数字成像和印制性能试验
JIS X0524-2007 信息技术.自动识别和数据捕获技术.条形码主要试验规范
JIS X6248-2007 信息技术.80mm(每面1.46 G字节)和120mm(每面4.7 G字节)DVD可再记录盘(DVD-RW)
JIS Z8208-2007 文章校对符号
JIS X19790-2007 信息技术.安全技术.密码模块的安全要求
JIS X0812-2007 信息和文献.图书馆评估指标
JIS X0814-2007 信息和文献.国际图书馆统计学
JIS B7187-2007 16mm和35mm文件的缩微拍摄.银色明胶型缩微胶片.使用程序
JIS Z8210 AMD 1-2007 公共信息符号(修改件1)
JIS Z6001-2007 缩微图形学.A6透明单片缩影胶片.映像排序
JIS T8133-2007 机动车辆使用者用防护头盔
JIS T8134-2007 自行车使用者用防护头盔
JIS T1022 AMD 1-2007 医院和诊所的医用房间电气装置的安全要求
JIS T8060-2007 血液和体液接触的防护用服装.血液和体液渗透防护服装材料阻力的测定.用人造血液的试验方法
JIS T8122-2007 危险生物剂防护用防护服.分类和试验方法
JIS T8123-2007 用粒状磨料的喷砂操作用防护服
JIS T8121-2-2007 防护服.防止刀切伤和刺伤的手套和护臂.第2部分:锁子甲以外材料制成的手套和护臂
JIS T8114-2007 防震手套
JIS T3263-2007 血管内导管用Y型连接机械
JIS T3267-2007 血管内用导线
JIS T3305-2007 造影剂用注射针
JIS T3256-2007 胰岛素泵用注射装置
JIS T3265-2007 一次性用无菌伸缩管
JIS T3262-2007 导引器注射针和导引器导管
JIS T3260-2007 扩张器
JIS T3269-2007 胆管和胰腺管用斯滕特固定模和引流导管
JIS T3259-2007 一次性使用的无菌充填器
JIS T3261-2007 无菌一次性使用的导管导引器
JIS T3307-2007 无菌经皮经肝的胆管造影术注射针
JIS T3257-2007 一次性使用的自动柳叶刀
JIS T6130-2007 一次性无菌牙科注射针
JIS T3254-2007 血液气体样本收集用一次性使用的注射器
JIS T3252-2007 血管造影术装置
JIS T3351-2007 压力监测用管设备
JIS T3270-2007 长期使用的输尿管软管斯滕特固定模
JIS T3264-2007 一次性使用的肠道送食伸缩管
JIS T7209-2007 医疗用氧气浓缩机.安全要求
JIS S0022-4-2007 老年人和残疾人用指南.包装和容器.使用者的评估方法
JIS S0022-3-2007 老年人和残疾人用指南.包装和容器.识别用触摸标志
JIS C2263-2007 电绝缘用带B级环氧树脂粘合剂的玻璃衬底云母纸
JIS C2264-2007 电绝缘用带B级环氧树脂粘合剂的聚酯膜衬底云母纸
JIS C2265-2007 电绝缘用待浸渍处理的塑料膜或非织造织物衬底云母纸(VPI)
JIS C2262-2007 电绝缘用带树脂粘合剂的待浸渍处理的玻璃衬底云母纸(VPI)
JIS C1102-1-2007 直接动作指示模拟电气测量仪器及其附件.第1部分:各种通用零件的定义和一般要求
JIS C60695-11-2-2007 着火危险测试.第11-2部分:试验火焰.1kW标称预混合型火焰.设备、验证试验安排和指南
JIS C8514-2007 带水电解质的原电池安全
JIS C2134-2007 固体绝缘材料的耐起痕指数和比较起痕指数用测定方法
JIS C8282-2-11-2007 家用和类似用途插头和插座端口.第2-11部分:旋锁及其他锁的特殊要求
JIS H7313-2007 超导性.成批高温超导体的测量.大粒氧化物超导体的陷波流量密度
JIS C3711-2007 绝缘架空线系统
JIS C8201-1-2007 低压开关装置和控制装置.第1部分:一般规则
JIS C9335-2-211-2007 家用和类似用途电器的安全.第2-211部分:家用热理疗仪的特殊要求
JIS C4908-2007 电气设备用电容器
JIS C2138-2007 电绝缘材料.相对介电常数和介电损耗因子的测定方法
JIS C8201-5-1-2007 低压开关装置和控制装置.第5-1部分:控制电路器件和开关元件.机电控制电路器件
JIS C9335-2-210-2007 家用和类似用途电器的安全.第2-210部分:家用电磁感应理疗仪的特殊要求
JIS C9335-2-207-2007 家用和类似用途电器的安全.第2-207部分:电解水生产设备的特殊要求
JIS C8714-2007 便携式电子设备使用的可移动型锂离子二次电池和电池组的安全试验
JIS B8042-3-2007 燃气轮机.采购.第3部分:设计要求
JIS Z9125-2007 室内工作场所的照明
JIS C0365-2007 电击防护.装置和设备的通用部分
JIS C8303-2007 家用和类似一般用途的插头和插座
JIS C9335-2-212-2007 家用和类似用途电器的安全.第2-212部分:家用汽化器的特殊要求
JIS C8152-2007 一般照明用白光放射二极管的测量方法
JIS C3664-2007 绝缘电缆的导线
JIS C3663-6-2007 橡胶绝缘电缆.额定电压≤450/750V.第6部分:电弧焊接电极电缆
JIS C3663-5-2007 橡胶绝缘电缆.额定电压≤450/750V.第5部分:电梯电缆
JIS C3663-4-2007 橡胶绝缘电缆.额定电压≤450/750V.第4部分:软线和软电缆
JIS C3665-1-3-2007 燃烧条件下电缆和光缆的试验.第1-3部分:单根绝缘电线或电缆的垂直火焰蔓延用试验.燃烧小滴/颗粒的测定程序
JIS C3665-1-2-2007 燃烧条件下电缆和光缆的试验.第1-2部分:单根绝缘电线或电缆的垂直火焰蔓延用试验.1kW预混合火焰用程序
JIS C3665-1-1-2007 燃烧条件下电缆和光缆的试验.第1-1部分:单根绝缘电线或电缆的垂直火焰蔓延用试验.试验仪器
JIS C3502-2007 电视接收机用同轴电缆
JIS C7709-3 AMD 2-2007 可转换性和安全性控制用带量规的灯头和灯座.第3部分:量规(修改件2)
JIS C7709-2 AMD 2-2007 可转换性和安全性控制用带量规的灯头和灯座.第2部分:灯座(修改件2)
JIS C2318-2007 电气用均衡双轴取向的聚对苯二甲酸乙二醇酯薄膜
JIS C8708-2007 密封型镍、氢蓄电池
JIS C9614 AMD 1-2007 电动剃须刀(修改件1)
JIS C9613 AMD 1-2007 手持吹风机(修改件1)
JIS C9608 AMD 1-2007 滚筒式电动烘干机(修改件1)
JIS C9601 AMD 1-2007 电扇(修改件1)
JIS C9250 AMD 1-2007 微波炉(修改件1)
JIS C9212 AMD 1-2007 电饭锅和电饭堡温器(修改件1)
JIS C9210 AMD 1-2007 电热毯(修改件1)
JIS C9209 AMD 1-2007 电KOTATU(修改件1)
JIS C8319 AMD 1-2007 螺旋熔丝和D型熔丝的特殊要求(修改件1)
JIS C8314 AMD 1-2007 低压熔丝管的特殊要求(修改件1)
JIS T0922-2007 老年人和残疾人用指南.触摸指南地图的信息内容、形状和显示方法
JIS C60695-11-5-2007 燃烧物易燃性试验.第11-5部分:试验火焰.针状火焰试验方法.仪器、验证试验方法和指南
JIS C9607 AMD 1-2007 家用电冰箱、冰箱冷冻和冷冻柜(修改件1)
JIS C9606 AMD 1-2007 电动洗衣机(修改件1)
JIS C8462-22-2007 家用和类似用途固定电气附件用接线盒与接线外壳的专门要求.第22部分:接线盒与接线外壳的特殊要求
JIS C5381-22-2007 低压浪涌保护装置.第22部分:连接到远程通信和信号网络的浪涌保护装置.选择和应用原则
JIS C8282-2-5-2007 家用和类似用途插头和插座端口.第2-5部分:适配器的特殊要求
JIS C8462-1-2007 家用和类似固定电气装置的附属设备外壳的一般要求
JIS C9335-2-105-2007 家用和类似用途电器的安全.第2-105部分:多功能淋浴间的特殊要求
JIS C9335-2-102-2007 家用和类似用途电器的安全.第2-102部分:有电连接的燃气、油和固体燃料燃烧设备的特殊要求
JIS C9335-2-79-2007 家用和类似用途电器.安全.第2-79部分:高压清洁器和蒸汽清洁器的特殊要求
JIS C8282-2-6-2007 家用和类似用途的插头和插座端口.第2-6部分:固定电器用带联锁开关插座的特殊要求
JIS C8462-21-2007 家用和类似用途固定电气设施附件盒和外壳.第21部分:包括盒与外壳悬挂方法的特殊要求
JIS Z4520-2007 锗γ射线探测器的试验规程
JIS A4423-2007 电动马桶坐圈的能效达标百分率计算方法和表达式
JIS S2070-2007 燃气和燃油器具的能效达标百分率计算方法和表达式
JIS S3026-2007 燃油器具用煤油填料器
JIS S2038-2007 燃油器具用燃芯
JIS S2037-2007 燃油器具用填料泵
JIS A1150-2007 混凝土的坍落流试验方法
JIS A1146-2007 灰浆棒法测定集料碱硅反应的试验方法
JIS A1145-2007 化学方法测定集料碱硅反应的试验方法
JIS A1121-2007 用洛杉矶试验机测定粗集料耐磨性的试验方法
JIS A1143-2007 轻质粗集料中漂浮粒子含量的试验方法
JIS A1142-2007 通过灰浆抗压强度测定细集料中有机杂质含量的试验方法
JIS A1141-2007 集料中密度低于1.95 g/cm*3的粒子的试验方法
JIS A1126-2007 划痕法测定粗集料中软质颗粒含量的试验方法
JIS A1125-2007 干燥法测定集料的含水量及表面湿度的试验方法
JIS A1111-2007 细集料表面湿度的试验方法
JIS A1105-2007 细集料中有机杂质的试验方法
JIS A6301-2007 吸音材料
JIS A6604-2007 停车场用金属零部件
JIS A4706 AMD 1-2007 窗(修改件1)
JIS A4702 AMD 1-2007 门具(修改件1)
JIS A5404-2007 水泥粘结的木屑板和碎料板
JIS A5416-2007 高压轻质加气混凝土装配板
JIS K6742-2007 供水系统用未增塑聚氯乙烯(PVC-U)管道
JIS K6743-2007 供水系统用未增塑聚氯乙烯(PVC-U)管道配件
JIS K6777-2007 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件
JIS K6776-2007 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道
JIS K6739-2007 排水用未增塑聚氯乙烯(PVC-U)管道配件
JIS A8919-2007 土方机械.操作者控制
JIS A8911-2007 土方机械.座椅安全带和座椅安全带固定器.性能要求和试验
JIS B7914-1-2007 测量和边界标记.第1部分:混凝土桩
JIS A1147-2007 通过耐渗透性测定混凝土混合物固结时间的试验方法
JIS R2015-2007 耐火制品中碳化硼原料的化学分析方法
JIS R2206-2-2007 耐火砖抗冷压强度的测试方法.第2部分:带包装试验
JIS R2206-1-2007 耐火砖抗冷压强度的测试方法.第1部分:无包装试验
JIS R2207-3-2007 耐火制品热膨胀性的试验方法.第3部分:使用棒形试件的接触法
JIS R2207-1-2007 耐火制品热膨胀性的试验方法.第1部分:非接触法
JIS A1441-2-2007 声学.利用声音强度测量建筑物和建筑构件的隔音性.第2部分:现场测量
JIS A1441-1-2007 声学.利用声音强度测量建筑物和建筑构件的隔音性.第1部分:实验室测量
JIS A1429-2007 建筑物给水和排水装置用器具和设备的声压级的现场测量
JIS R7609-2007 碳纤维.体积电阻率的测定
JIS R2207-2-2007 耐熔制品热膨胀率的试验方法.第2部分:使用柱形试件的接触方法
JIS A5423 AMD 1-2007 住宅屋顶用饰面水泥瓦(修改件1)
JIS A1440-2-2007 声学.实心标准楼板覆盖物传递冲击声音减低的实验室测量.第2部分:标准重型冲击源法
JIS A6512-2007 移动式隔墙
JIS R7651-2007 碳材料的晶格参数和微晶尺寸的测量
JIS R2209-2007 耐火砖负荷下耐火性的测试方法
JIS S6005-2007 自动铅笔的笔芯
JIS R1678-2007 室温下连续纤维增强陶瓷复合材料的有孔张力用试验方法
JIS S6006-2007 铅笔、彩色铅笔及其笔芯
JIS A4004-2007 散热器、对流供暖器和类似设备.分类和要求
JIS A1400-2007 散热器、对流式供暖器和类似设备.性能试验方法
JIS A5702-2007 硬质聚氯乙烯(PVC)波纹板
JIS A1440-1-2007 声学.实心标准楼板覆盖物传递冲击声音减低的实验室测量.第1部分:标准轻型冲击源法
JIS A1445-2007 天花板悬浮系统用材料的测试方法
JIS A8202-2-2007 隧道掘进机械.安全.第1部分:自由断面隧道掘进机用要求
JIS A8202-1-2007 隧道掘进机械.安全.第1部分:盾构机和水平止推机用要求
JIS A8340-3-2007 土方机械.安全.第3部分:装载机的要求
JIS A8340-2-2007 土方机械.安全.第2部分:推土机的要求
JIS A8509-1-2007 基础施工机械.安全.第1部分:打桩设备的要求
JIS T9252-2007 举重平台和家用轮椅平行升降台
JIS C9615 AMD 1-2007 空气过滤器(修改件1)
JIS R2252-2-2007 耐燃制品的抗磨损性试验方法.第2部分:高温法
JIS R2252-1-2007 耐燃制品的抗磨损性试验方法.第1部分:常温法
JIS A1905-2-2007 带小空腔降低室内空气污染的吸附建筑材料用性能试验.第2部分:抑制甲醛排放用能力测量
JIS A1905-1-2007 带小空腔降低室内空气污染的吸附建筑材料用性能试验.第1部分:对产生连续甲醛浓度的吸附量用测量
JIS R2251-3-2007 耐火材料导热性的试验方法.第3部分:平稳热流法
JIS R2251-2-2007 耐火材料导热性的试验方法.第2部分:热线法(并行)
JIS R2251-1-2007 耐火材料导热性的试验方法.第1部分:热线法(交叉排列)
JIS A1451 AMD 1-2007 建筑物材料和建筑物结构部件的磨损试验方法(采用配合磨擦和冲击旋转盘的铺地材料方法用磨擦试验方法)(修改件1)
JIS R2011-2007 含碳和/或碳化硅耐火材料的化学分析法
JIS C9335-2-83-2007 家用及类似用途电器.安全.第2-83部分:屋顶排水用加热集水沟的特殊要求
JIS C9335-2-100-2007 家用和类似电器.安全.第2-100部分:花园用手持式电动真空鼓风机和真空鼓风机的特殊要求
JIS R7608-2007 碳纤维.树脂浸渍纱拉伸性能的测定
JIS A6513 AMD 1-2007 金属制栅栏和门(修改件1)
JIS A5022-2007 使用再生M级集料的再生混凝土
JIS A5364 AMD 1-2007 预制混凝土制品.材料和生产方法的一般规则(修改件1)
JIS F8076 AMD 1-2007 船舶电气设施.第504部分:专用零部件.控制和仪器仪表(修改件1)
JIS F8082-2007 船舶和海上技术.计算机应用.海上用可编程电子系统的开发和使用总则
JIS F8010-2007 船舶与海上技术.客轮低位照明.布置
JIS T9255-2007 辅助站立和坐下用的电动机制椅子和座椅
JIS B9208 AMD 1-2007 耕耘机用拖车.带制动器的传动轮轴(修改件1)
JIS D5305-3-2007 电动道路车辆.安全规范.第3部分:人员电危险的防护
JIS D5305-2-2007 电动道路车辆.安全规范.第2部分:功能安全方法和失效防护
JIS D5305-1-2007 电动道路车辆.安全规范.第1部分:牵引用蓄电池
JIS C8373-2007 电车专用道
JIS D3633-3-2007 道路车辆.燃料油喷射泵测试.第3部分:应用和试验程序
JIS D3633-2-2007 道路车辆.燃料油喷射泵测试.第2部分:静态条件
JIS D3633-1-2007 道路车辆.燃料油喷射泵测试.第1部分:动态条件
JIS D9452-2007 自行车.反光器
JIS D9451-2007 自行车.车铃
JIS D9432-2007 自行车.链调整器和曲柄扁销
JIS D4102-2007 充气轮胎用车轮和轮辋.词汇、标识和标记
JIS D0803-2007 交通信息和控制系统.低速操作用航行辅助装置.性能要求和试验过程
JIS D0202 AMD 1-2007 汽车零件用覆膜的总规则(修改件1)
JIS D0109-2007 摩托车和机动自行车.词汇
JIS D4422-2007 汽车部件.鼓式制动器和盘式刹车蹄片.剪切强度试验程序
JIS D9454-2007 自行车.传动链壳体
JIS D0804-2007 智能运输系统.道路偏离警告系统.性能要求和试验程序
JIS E1123-2007 轨端淬火钢轨
JIS E5004-5-2007 铁路设施.铁路车辆用电子设备.第5部分:电工元件.HV熔丝用规则
JIS E1120-2007 轨头淬火钢轨
JIS E4014-2007 铁路车辆.绝缘电阻及耐压的试验方法
JIS E3017-2007 铁路信号发出用部件.防水试验方法
JIS E1203-2007 合成钢轨枕.由纤维增强泡沫聚氨酯制造
JIS K4830 AMD 1-2007 硝酸铵燃料油炸药的柔性中间散装集装箱性能的测试方法(修改件1)
JIS Z4615-2007 工业X-射线仪用有效焦点尺寸的测量
JIS Z4606-2007 射线照相测试用工业X-射线仪
JIS B7913-2007 光学和光学仪器.测量仪器用辅助装置.三角台
JIS B7256-2007 显微镜.提供给用户的信息
JIS B7255-2007 显微镜.C型连接接口
JIS B7121-2007 光学和光学仪器.双筒望远镜、单筒望远镜和定位观测望远镜的规范
JIS B7505-1-2007 无液气压计.第1部分:弹簧管压力计
JIS B0090-1-2007 光学元件和系统的制图准备.第1部分:总则
JIS B0090-17-2007 光学元件和系统的制图准备.第17部分:激光辐射损害阈
JIS B0090-10-2007 光学元件和系统的制图准备.第10部分:光学元件和接合组件的数据表
JIS B7912-6-2007 试验大地测量仪器的现场试验程序.第6部分:旋转激光器
JIS R3503 AMD 1-2007 化学分析用玻璃仪器(修改件1)
JIS B7254-2007 显微镜.放大倍率
JIS C1613-2007 金属卤化物灯型曝光仪的强光紫外线辐射计
JIS B7263-4-2007 光学和光学仪器.望远系统的试验方法.第4部分:天文望远镜的试验方法
JIS B7263-2-2007 光学和光学仪器.望远系统的试验方法.第2部分:双目镜系统的试验方法
JIS B7263-1-2007 光学和光学仪器.望远系统的试验方法.第1部分:基本特性的试验方法
JIS B2316-2007 钢制套筒式焊接管配件
JIS B8828-4-2007 起重机.工作和非工作状态下的锚定装置.第4部分:动臂起重机
JIS B8811-2007 升降用圆形吊索
JIS B8818-2007 起重用带状吊索
JIS B0125-1-2007 流体动力系统及部件.图形符号和线路图.第1部分:常规用图形符号和数据处理设备
JIS B8375-2-2007 气动流体动力.五孔定向控制阀.第2部分:任意电连接器的安装界面
JIS B8473-2007 燃料油管道线.电磁阀
JIS B8375-1-2007 气动流体动力.五孔定向控制阀.第1部分:无电气连接器的安装界面
JIS K6369-2007 钢丝输送带
JIS B8836-2007 起重机.钢索.保养、维修、安装、检查和报废
JIS B1200-2007 带法兰的六角焊接螺母
JIS B1048-2007 紧固件.热浸镀层
JIS B1177-2007 内六角定位螺钉
JIS B0004-2007 弹簧的技术表示法
JIS B0163-2-2007 滑动轴承.符号.第2部分:应用符号
JIS B0163-1-2007 滑动轴承.符号.第1部分:基本符号
JIS B1084-2007 紧固件.扭矩/夹持力测试
JIS B2803-2007 吊钩
JIS B1186 AMD 1-2007 摩擦夹紧连接件用高强度六角螺栓、六角螺母和平垫圈组件(修改件1)
JIS C9912-2007 电气和电子设备用塑料部件件的识别标记
JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度
JIS C60068-2-70-2007 环境测试.第2部分:试验.试验Xb:由手指和手摩擦引起的标记和字符磨损
JIS C60068-2-18-2007 环境测试.第2-18部分:试验.试验R和指南:水
JIS C60068-2-81-2007 环境测试.第2-81部分:冲击.冲击响应频谱合成
JIS C9911-2007 回收的计算和显示方法及电气或电子设备的再利用指标
JIS Z8519-2007 人类工效学.办公室工作视频显示终端(VDTs).非键盘输入装置的要求
JIS Z8531-3-2007 人类工效学.多媒体用户接口软件.第3部分:媒体选择和组合
JIS Z8531-1-2007 人类工效学.多媒体用户接口软件.第1部分:设计原则和框架
JIS Z8501-2007 工作系统设计的人类工效学原则
JIS Z8503-6-2007 控制中心的人类工效学设计.第6部分:控制中心环境要求
JIS Z8531-2-2007 人类工效学.多媒体用户接口软件.第2部分:多媒体导航和控制
JIS Z8523-2007 人类工效学.办公室工作视频显示终端(VDTs).用户指南
JIS Z8511 AMD 1-2007 人类工效学.办公室工作视频显示终端(VDTs).一般介绍(修改件1)
JIS Z8516-2007 人类工效学.办公室工作视频显示终端(VDTs).工作环境指南
JIS B8614-2007 机械运输冷冻装置.冷却能力的试验方法
JIS R1679-2007 毫米波频中电磁波吸收器的反射率用测量方法
JIS B7761-3-2007 人体手臂传导振动.第3部分:测量和评估用一般要求
JIS Z1903-2007 防腐蚀用矿酯膏
JIS S0026-2007 老年人和残疾人用指南.公共洗手间内抽水马桶操作设备和器具的形状、颜色、和布置
JIS H7312-2007 超导电性.剩余电阻率的测量.Nb3Sn复合超导电体的剩余电阻率
JIS B0137-2007 间接静电处理复印机术语汇编
JIS B7753-2007 光曝露和光-水曝露试验机(明火碳弧型)
JIS H8304-2007 陶瓷喷镀
JIS C60721-2-8-2007 环境条件等级.第2部分:自然界环境条件.第8节:火焰燃烧
JIS H0401-2007 热浸镀锌层的试验方法
JIS B7751-2007 光曝露和光-水曝露试验机(封闭碳弧型)
JIS Z1641-2007 鼓形钢桶回收要求
JIS H8641-2007 热浸镀锌涂层
JIS G0579-2007 不锈钢用阳极极化曲线测量方法
JIS H9302-2007 陶瓷喷镀的推荐实施规程
JIS B7988-2007 废气中氧化亚氮用连续分析器
JIS Z7001-2007 塑料.环境方面.标准中包含环境问题的一般指南
JIS K0450-60-10-2007 工业水和废水中游离的4-壬基苯酚异构体的测试方法
JIS Q14063-2007 环境管理.环境通信.指南和示例
JIS A1405-2-2007 声学.阻抗管中吸声系数和阻抗的测定.第2部分:传递函数法
JIS A1405-1-2007 声学.阻抗管中吸声系数和阻抗的测定.第1部分:驻波比法
JIS A1229-2007 土工织物及土工织物相关产品.联锁的混凝土砌块路面上模拟损伤的程序(碾压机方法)
JIS S6055 AMD 1-2007 修正液(修改件1)
JIS L1021-12-2007 铺地纺织物.第12部分:用威特曼鼓轮和六足滚筒测试仪产生的外观变化
JIS L1021-16-2007 铺地纺织物.第16部分:静电特性的评定.行走试验
JIS L1021-14-2007 铺地纺织物.第14部分:用改良的威特曼鼓轮试验测定在剪边处的抗损坏性
JIS L1021-13-2007 铺地纺织物.第13部分:外观变化的评估
JIS P3401 AMD 1-2007 牛皮纸(修改件1)
JIS S0023-2-2007 老年人用指南.衣服的设计.扣子的形状和使用
JIS L1021-15-2007 铺地纺织物.纤维粘合力的测定
JIS L1021-10-2007 铺地纺织物.第10部分:测定由于水和热度条件变化产生的尺寸变化
JIS L1021-9-2007 铺地纺织物.第9部分:抗分层力的测定
JIS L1021-8-2007 铺地纺织物.第8部分:毛束联结牢度的测定
JIS L1021-7-2007 铺地纺织物.第7部分:在动态载荷下厚度损耗的测定
JIS L1021-6-2007 铺地纺织物.第6部分:在静态载荷下厚度损耗的测定
JIS L1021-5-2007 铺地纺织物.第5部分:每单位长度和每单位面积毛束和/或毛圈数目的测定
JIS L1021-4-2007 铺地纺织物.第4部分:质量测定方法
JIS L1021-3-2007 铺地纺织物.第3部分:厚度的测定
JIS L1021-2-2007 铺地纺织物.第2部分:长方形铺地纺织物.尺寸测定
JIS L1021-1-2007 铺地纺织物.第1部分:物理试验用试样的选择和切割
JIS B9624-2007 图形技术和摄影术.反射和传输计量学用认证的参考材料.包括组合标准不确定度测定用文档和程序
JIS X6912-2007 包含重新使用部件的办公设备的质量和性能
JIS B0139-2007 复印机.图形符号
JIS L0891-2007 氙弧灯光或日光型碳弧灯光的人工加速风化色牢度用试验方法
JIS L1089-2007 层叠织物的测试方法
JIS L1086-2007 热熔内衬织物的测试方法
JIS L1075-2007 机织物及针织物的绒毛保持性用测试方法
JIS L1021-11-2007 铺地纺织物.第11部分:磨损的测定
JIS S4100 AMD 1-2007 一次性使用的身体保暖用具(修改件1)
JIS L1021-19-2007 铺地纺织物.第19部分:清洁的评估方法
JIS L1021-18-2007 铺地纺织物.第18部分:易沾污性的评估方法
JIS L1021-17-2007 铺地纺织物.第17部分:电阻的测定
JIS L1920-2007 纺织品对抗房屋尘螨功效用试验方法
JIS Z8910-2007 集尘用过滤介质的试验方法.织物过滤器耐用性的取样和试验方法
JIS S6028-2007 水彩颜料
JIS S6026-2007 蜡笔和油彩
JIS S3015-2007 拉链
JIS G4107-2007 高温设备用合金钢螺栓连接材料
JIS H7201-2007 吸氢合金的压力-组成-温度(PCT)关系用测量方法
JIS H7203-2007 吸氢合金的吸氢/解吸循环特性用测量方法
JIS H7202-2007 吸氢合金的吸氢/解吸反应率用测量方法
JIS H7003-2007 吸氢合金用术语
JIS G0558-2007 钢.脱碳深度测定
JIS G4108-2007 特殊用途螺栓连接材料的合金钢棒材
JIS G3103-2007 锅炉和压力容器用碳钢和钼合金钢厚板材
JIS H1183-2007 银锭的发射光谱分析法
JIS G3443-1-2007 供水用镀层钢管.第1部分:管
JIS G5502 AMD 1-2007 球状石墨铸铁件(修改件1)
JIS G4318 AMD 1-2007 冷加工成品不锈钢棒(修改件1)
JIS G4308 AMD 1-2007 不锈钢盘条(修改件1)
JIS C9621 AMD 1-2007 台式电动砂轮机(修改件1)
JIS B7914-2-2007 测量和边界标记.第2部分:金属标志
JIS B6064-2-2007 带法兰接触面的空心锥度界面.第2部分:锥槽.尺寸
JIS B6064-1-2007 带法兰接触面的空心锥度界面.第1部分:锥柄.尺寸
JIS H1352-2007 铝和铝合金中硅的测定方法
JIS Z2320-2-2007 无损检验.磁粒子试验.第2部分:检测介质
JIS G3473-2007 汽缸筒用碳钢管
JIS G3472-2007 机动车用电阻焊碳钢管
JIS G3454-2007 压力设备用碳钢管
JIS G3119-2007 锅炉和压力容器用锰-钼和锰-钼-镍合金钢厚板材
SAE AS60491/2 AS60491/2 Sleeve, Chafe-protection, Wrap-around, Self-closing (-55° to +200°C)
SAE AMS7258 Rings, Sealing, Butadiene-Acrylonitrile (Nbr) Rubber Fuel Resistant, Low Shrinkage 65-75
SAE AMS7266 Rings, Sealing, Fluorosilicone Rubber, General Purpose, High Temperature, Fuel and Oil Resistant 65-75
SAE AMS3227 Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil and Coolant Resistant, Low Swell, 55-65
SAE AMS3226 Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil and Coolant Resistant, Low Swell, 45-55
SAE AS6173/1 CUTTING TOOL, ELECTRICAL, WIRE CUTTING WITH LACE/TIE STRAP CUTTER, HAND ACTUATED, TYPE II, FOR AIRCRAFT WIR
SAE AS5729 O-Ring Molded from AMS7379 (Fluorocarbon) Material
SAE AMSP83461/1 Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275掳F (135掳C) Sizes and
SAE AMSP83461/2 Packing, Preformed, Petroleum-Hydraulic Fluid Resistant, Improved Performance at 275 掳F (135 掳C) for Use
SAE AS85049/69 Connector Accessories, Electrical, Adapter, Shrinkboot, Category 5 (MIL-DTL-38999 Series III and IV Conne
SAE AS85049/54 Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 45掳, Category 4C (For AS50151 Crimp,
SAE AS85049/45 Connector Accessories, Electrical, Strain Relief, Straight, Nonmetallic, Category 4c (For MIL-DTL-27599 S
SAE AS85049/41 Connector Accessories, Electrical, Non-Environmental, Strain Relief, Straight, Category 4C (For AS50151 G
SAE AS85049/83 Connector Accessories, Electrical, Backshell, 45掳, Self- Locking, Shield, Band Termination (RFI/EMI), Shr
SAE AS85049/82 Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (RFI/EMI),
SAE AS85049/85 Connector Accessories, Electrical, Backshell, Straight, Self-Locking, Shield Band Termination (RFI/EMI),
SAE AS85049/84 Connector Accessories, Electrical, Backshell, 90掳, Self-Locking, Shield Band Termination (RFI/EMI), Shrin
SAE AS85049/79 Connector Accessories, Electrical, Backshell, Environmental, 90 Degrees, Shield Termination, Category 2B,
SAE AS85049/78 Connector Accessories, Electrical, Backshell, Environmental, 45掳, Shield Termination, Category 2B, Nonsel
SAE AS85049/77 Connector Accessories, Electrical, Backshell, Environmental, 45掳, Shield Termination, Category 2B, Nonsel
SAE AS85049/61 Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For MIL-DTL-27599 Connectors)
SAE AS85049/56 Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (MIL-DTL-38999 Series I and II C
SAE AS85049/58 Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (Mil-DTL-38999 Series I and II Connecto
SAE AS85049/59 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-22992 Connectors, Class
SAE AS85049/53 Connector Accessories, Electrical, Strain Relief, Nonenvironmental, Straight, Category 4C (For AS50151 Cr
SAE AS85049/55 Connector Accessories, Electrical, Strain Relief, Nonenvironmental, 90掳, Self-Locking and Non-Self-Lockin
SAE AS85049/36 Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shield Termination, Category 3B
SAE AS85049/34 Connector Accessories, Electrical, Backshell, Non-Environmental, Threaded Adapter, Category 3C (For MIL-
SAE AS85049/46 Connector Accessories, Electrical, Strain Relief, 90掳, Nonmetallic, Category 4C (For MIL-DTL-27599 Series
SAE AS85049/17 Connector Accessories, Electrical, Backshell, Environmental, Straight, Shield Termination, Category 2B (F
SAE AS85049/62 Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-38999 Series I and II C
SAE AS85049/42 Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Straight, Category 4A (For AS50151 So
SAE AS7928 Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For
SAE AS3618 Cable, Safety, Ferrule, Elongated, Corrosion and Heat Resistant Steel, UNS S32100
SAE AS34501 Connectors, Receptacle, Electrical, Wall Mounting, Rear Release, Crimp Contact, AN Type
SAE AS27646/1 Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Corrosion Resistant Nitrogen Steel (CREN)
SAE AS27645/1 Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty, Corrosion Resistant Nitrogen
SAE AS27644/1 Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty, Corrosion Resistant Nitrogen Steel (CREN)
SAE AS27643/1 Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty, Corrosion Resistant Nitroge
SAE AS27641/1 Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty, Corrosion Resistant Nitrogen Steel (CREN)
SAE AS27640/1 Bearing, Ball, Airframe, Anti-Friction, Heavy-Duty, Corrosion Resistant Nitrogen Steel (CREN)
SAE AS26574 Circuit Breaker-Trip-Free, Push-Pull, 1/2 Thru 20 Amp, Type I
SAE AS21428/1 Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Precision, Corrosion Resistant Nitrogen Steel (C
SAE ARP5758 Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells
SAE AS85049 Connector Accessories, Electrical General Specification For
SAE AS4716 Gland Design, O-Ring and Other Elastomeric Seals
SAE AS85049/109 Connector Accessories, Electrical Backshell, Straight, Non-Self Locking and Self Locking, Pre-Attached S
SAE AS85049/115 Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached S
SAE AS85049/114 Connector Accessories, Electrical Backshell, 90 Degree, Self-Locking and Non-Self Locking, Pre-Attached
SAE AS85049/112 Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached S
SAE AS85049/111 Connector Accessories, Electrical Backshell, 90 Degree, Self Locking and Non-Self Locking, Pre-Attached
SAE AS85049/117 Connector Accessories, Electrical Backshell, 90 Degree, Self Locking and Non-Self Locking, Pre-Attached
SAE ARP6180 A Guideline for Aerospace Platform Photonics Training and Awareness Education
SAE ARP5414 Aircraft Lightning Zoning
SAE AS6099 FITTING, ELBOW, 90 DEGREE, STANDARD AND REDUCER, FLARED, 37 DEGREE SPHERICAL
SAE AMST81914/5 Tubing, Plastic, Extra Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Close Convolution (Cancelled
SAE AMST81914/4 Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution (Cancelle
SAE AMST81914/2 Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene, Close Convolution (Cancelled Mar 2
SAE AMST81914/3 Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Standard Convolution (Cancelled M
SAE AMST81914/7 Tubing, Plastic, Flexible, Convoluted, Fluorinated Ethylene Propylene, Integral Braid (Cancelled Mar 201
SAE AMST81914/6 Tubing, Plastic, Flexible, Convoluted, Ethylene-Tetrafluoroethylene, Standard Convolution (Cancelled Mar
SAE AMST81914/1 Tubing, Plastic, Flexible, Convoluted, Polytetrafluoroethylene, Standard Convolutions (Cancelled Mar 201
SAE AMS1386 Compound, Silicone Rubber Remover Aircraft Turbine Engine Components Room Temperature Application
SAE AMS1374 Remover, Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type
SAE AS8037 Minimum Performance Standard for Aircraft Position Lights
SAE AS83519 Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification Fo
SAE AS85049/86 Connector Accessories, Electrical, Backshell, 45掳, Self-Locking, Shield Band Termination (RFI/EMI), Shrin
SAE AS5368 Fitting Assembly, Adapter - Ring Locked Port Connection to Flared Tube End, 3000 psi
SAE AS1986 Fitting Assembly, Adapter, Ring Locked Port Connection to Beam Seal 4000 Psi and 5000 Psi
SAE AIR6133 Design and Safety Criteria for Passenger Boarding Stairways
SAE AIR6183 Procedures for the calculation of airplane fuel consumption
SAE AS85049/5 Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Down, Category 1A (For MIL-DTL
SAE AS5370 Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems (STABILIZED Ma
SAE ARP6184 Military Wheels and Electrically Actuated Brakes
SAE AS755 Aircraft Propulsion System Performance Station Designation and Nomenclature
SAE AS39029/3 Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-C-81659 Series 1 Connectors) (STABILIZED
SAE AS39029/7 Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (For MIL-C-26482-Series 2 and MIL-C-81703
SAE AS39029/8 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (For MIL-C-26482 Series 2 and MIL-C-817
SAE AS39029/2 Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-C-81659 Series 1 Connectors) (STABILIZED Ma
SAE AIR6185 Lightning Effects on Hydraulic Transport Elements on Composite Aircraft
SAE AIR1828 Guide to Engine Lubrication System Monitoring
SAE AMSS8802 Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE AMSWWT700/6 Tube, Aluminum Alloy, Drawn, Seamless, 6061
SAE AMS2813 Packaging and Marking of Packages of Welding Wire, Standard Method
SAE AMS2814 Packaging and Marking of Packages of Welding Wire, Premium Quality
SAE AMS2248 Chemical Check Analysis Limits, Corrosion and Heat-Resistant Steels and Alloys, Maraging and Other Highly-Al
SAE AMS2647 Fluorescent Penetrant Inspection, Aircraft and Engine Component Maintenance
SAE AMS2355 Quality Assurance, Sampling and Testing, Aluminum Alloys and Magnesium Alloy, Wrought Products (Except Forgi
SAE AMS4284 Aluminum Alloy Castings, Permanent Mold, 7.0Si - 0.30Mg (356.0-T6), Solution and Precipitation Heat Treated
SAE AMS4375 Sheet and Plate, Magnesium Alloy, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized
SAE AMS6517 Steel, Bars, and Forgings, 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, Ann
SAE AS3506 Insert - Screw Thread, Thin Wall, Self-Locking Uns N07718, Silver Plated, Class: 185 Ksi/1025 Degrees F, Pro
SAE ARP6404 Aircraft Tire Electrical Resistance Test
SAE AMS6437 Steel, Sheet, Strip, and Plate, 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11)
SAE AMS6439 Steel Sheet, Strip, and Plate, 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC), Consumable Electrode V
SAE AMS4982 Titanium Alloy Wire, 44.5 Cb
SAE AMS4213 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr, Solution Heat Treated, Cold Worked and Natu
SAE ARP4992 Periodic Test Plan for Processing Solutions
SAE AMS2804 Identification Castings
SAE AMS2808 Identification Forgings
SAE AMS2474 Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating (NONCURRENT)
SAE AMS4248 Aluminum Alloy Hand Forgings and Rolled Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652), Solution Heat T
SAE AMS4134 Aluminum Alloy, Die Forgings, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4), Solution Heat Treated
SAE AMS4207 Aluminum Alloy Sheet, Alclad, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Trea
SAE AMS4114 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), as Fabricated
SAE AMS4029 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4340 Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511), Solution Heat Treated, Stress Reli
SAE AMS4631 Aluminum Bronze Rods, Bars and Forgings, 90.5Cu - 7.5Al - 1.9Si, Stress Relieved (NONCURRENT)
SAE AMS4341 Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), Solution Heat Treated, Stress Reli
SAE AMS4349 Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited for Sandwich Construction 5056, 350 (177)
SAE AMS4016 Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized
SAE AS6146 Nut, Self Locking, Double Hexagon, Reduced Envelope, UNS66286
SAE AMSQQA250/9 Aluminum Alloy 5456, Plate and Sheet
SAE AMSQQA250/6 Aluminum Alloy 5083, Plate and Sheet
SAE AMS7735 Alloy Wire, Round, 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn, Solution Heat Treated
SAE AMS4892 Alloy Castings, Corrosion and Heat-Resistant, 66Ni - 29Cu - 4.0Si, as Cast
SAE AMS4893 Alloy Castings, Corrosion and Heat-Resistant, 66Ni - 29Cu - 4.0Si, Solution Treated
SAE AMS4348 Core, Honeycomb Aluminum Alloy, Corrosion Inhibited, for Sandwich Construction, 5052, 350 (177)
SAE AMS4405 Aluminum Alloy, Alclad Sheet (6156-T4), 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg, Solution Heat Treated and Naturall
SAE AMS4403 Aluminum Alloy, Die Forgings, 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452), Solution Heat Treated, Compressio
SAE AMS4402 Aluminum Alloy, Extruded Profiles (2024-T432), 4.4Cu - 1.5Mg - 0.6Mn, Annealed, Stretch Formed, Solution Hea
SAE AMS4337 Aluminum Alloy, Extruded Profiles (7055-T77511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat Treated, Str
SAE AMS4329 Aluminum Alloy, Plate (7085-T7651), 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr, Solution Heat Treated, Stress-Relieved,
SAE AMS4328 Aluminum Alloy, Plate (2397-T87), 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn, Solution Heat Treated, Cold Wor
SAE AMS4279 Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024 -T4 Flat Sheet), Solution Heat Treated, High Form
SAE AMS4229 Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat
SAE AMS4247 Aluminum Alloy, Hand Forgings, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Rel
SAE AMS4177 Core, Flexible Honeycomb, Aluminum Alloy, for Sandwich Construction, 5056, 350 (177)
SAE ARP982 Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products
SAE AMS2809 Identification, Titanium and Titanium Alloy Wrought Products
SAE AS4786 Driver Drills, Battery Powered
SAE AMS7725 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7498 Rings, Flash Welded, Titanium and Titanium Alloys
SAE AMS5339 Steel, Maraging, Investment Castings, 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al, Vacuum Melted, Homogenized, Ove
SAE AMS2368 Sampling and Testing of Wrought Titanium Raw Material, Except Forgings and Forging Stock
SAE ARP4853 Design Specification for Towbarless Tow Vehicles
SAE ARP4852 Design Specification for Towbarless Push-Back Tow Vehicles
SAE AS7788 Panels, Information, Integrally Illuminated (Cancelled Apr 2011)
SAE AMS3970/6 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing, Part 6 - Material Specification: Carbon
SAE AMS3970/4 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing Part 4 - Purchasing Specification for F
SAE AMS3970 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing Part 0 - Introduction
SAE AMS3970/3 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing Part 3 - Purchasing Specification for Ca
SAE AMS3970/5 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing, Part 5 - Purchasing Specification for C
SAE AMS3970/2 Carbon Fiber Fabric Repair Prepreg, 125 掳C (250 掳F) Vacuum Curing Part 2 - Qualification Program for Fiber
SAE ARP4776 Pallet/Container Loader Auto-Levelling Systems
SAE AMSS83318 Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cel
SAE AIR1854 Battery Powered Aircraft Tow Tractors-Factors for Design Consideration
SAE AMS2269 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
SAE AMS2263 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Tubing
SAE AMS2315 Determination of Delta Ferrite Content
SAE AMS2280 Trace Element Control, Nickel Alloy Castings
SAE AMS5382 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 54Co - 25.5Cr - 10.5Ni - 7.5A, As-Cast
SAE AMS5343 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Solutio
SAE AS31021 Connector, Receptacle, Electric, Box Mounting, Solder Contacts, AN Type
SAE AS85049/50 Connector Accessories, Electrical, Strain Relief, 90掳, Category 4C (For MIL-DTL-24308 Connectors)
SAE AMS5399 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings, 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al
SAE AMS5346 Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu, Solution and Precipitat
SAE AMS5347 Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu, Solution and Precipitat
SAE AMS5342 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Soluti
SAE AMS4674 Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings, 67Ni - 30Cu - 0.04S, Free Machining
SAE AMS5666 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings, 62Ni - 21.5Cr - 9.0Mo - 3
SAE AMS5610 Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 12.5Cr - Low Carbon (SAE 51416, 51416Se), Fre
SAE AMS5732 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -
SAE AMS5618 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C), Consumable
SAE AMSQQA367 Aluminum Alloy Forgings
SAE AMS5523 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 23Cr - 13.5Ni (SAE 30309S), Solution Heat Trea
SAE AMS5521 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 25Cr - 20Ni (SAE 30310S), Solution Heat Treate
SAE AMSR83248/1 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1
SAE AMS5893 Iron-Nickel Alloy, Bars, Forgings, and Rings, 42Fe - 37.5Ni - 14Co - 4.8(Cb + Ta)(Nb + Ta) - 1.6Ti, Solution
SAE AMS5868 Steel, Corrosion-Resistant, Seamless and Welded Aircraft Tubing, 19Cr - 9.5Ni (SAE 30304), Cold Drawn, 1/2 H
SAE AMS5731 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti
SAE AMS5796 Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire, 52Co - 20Cr - 10Ni - 15W
SAE AMS5617 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Va
SAE AMS5571 Steel, Corrosion and Heat-Resistant, Seamless Tubing, 18Cr - 10.5Ni - 0.70Cb (Nb), Solution Heat Treated
SAE AMS5880 Steel, Corrosion-Resistant, Bars, Wires, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C), for Bearin
SAE AMS5503 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr (SAE 51430) Annealed
SAE AMS5802 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti, Va
SAE AMSR83248/2 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 2
SAE AMS7510 Magnets, Rare-Earth/Cobalt, Permanent, Powder-Metallurgy Product
SAE AMS7510/2 Magnets, Rare-Earth/Cobalt, Permanent, Samarium-Cobalt, 33/67 - 18 (143) 250
SAE AMS7510/1 Magnets, Rare-Earth/Cobalt, Permanent, Samarium-Cobalt, 33/67 - 15 (119) 250
SAE AMS5872 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.
SAE AMS5870 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al,
SAE AMS5897 Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr - 11Ni - 0.80Cb (Nb) (SAE 3
SAE AMS5747 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti -
SAE AMS5712 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS5734 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006
SAE AMS5703 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti,
SAE AMS5591 Steel, Corrosion and Heat-Resistant, Tubing, Seamless, 12.5Cr (SAE 51410), Annealed
SAE AMS5611 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Cons
SAE AMS5580 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe, Annealed
SAE AMS5532 Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W
SAE AMS4221 Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Preci
SAE AMS4183 Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr, Solution Heat Treated and Str
SAE AMS3970/1 Carbon Fiber Fabric Repair Prepreg, 120 掳C (250 掳F) Vacuum Curing, Part 1 - General Requirements
SAE AIR5665 Architecture Framework for Unmanned Systems
SAE AS81582/4 Connector Adapter, Rfi Shielded, Cable to Electric Connector
SAE AS85896 Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Speci
SAE AS81582/5 Connector Adapter, Right Angle, Rfi Shielded, Electric Connector to Electric Connector
SAE AS81582/9 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, Caps, Protective
SAE AIR5487 Aircraft Tire History
SAE AMS5737 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B
SAE AS85049/95 Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, 3/4 Perimeter
SAE ARP5483/2 Rolling Element Bearing Hardness Test
SAE AIR4830 Aircraft Tire Pressure Monitoring Systems
SAE AS4262 Aircraft Ground Air Conditioning Service Connection
SAE AS20218 Bearing, Ball, Anti-Friction, Airframe
SAE AS85049/138 Connector Accessories, Electrical, Cap, Dust, Plastic, Category 9
SAE AS85049/90 Connector Accessories, Electrical, Backshell, 90掳, Self-Locking, Shield Band Termination (RFI/EMI), Shrin
SAE AS1031 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flared
SAE AIR4175 A Guide to the Development of a Ground Station for Engine Condition Monitoring
SAE AS1040 Fitting, Elbow, 45掳, Standard and Reducer, Bulkhead, Flared
SAE AS1034 Fitting, Elbow, 90 Degrees, Standard and Reducer, Flared
SAE AS1036 Fitting, Cross, Standard and Reducer, Flared
SAE AS1037 Fitting, Union, Standard and Reducer, Bulkhead, Flared
SAE AS1038 Fitting, Elbow, 90 Degrees, Standard and Reducer, Bulkhead, Flared
SAE AS1033 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flared
SAE AS1035 Fitting, Tee, Standard and Reducer, Flared
SAE AIR5490 Carbon Brake Contamination
SAE AMS5630 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
SAE MA4248 Cap Assembly, Protective Closure, Beam Seal Fitting, Low Pressure, Metric
SAE AMSQQA250/30 Aluminum Alloy 2219, Plate and Sheet
SAE AS81824/12 SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, TIN-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1,
SAE AMS6413 Steel, Mechanical Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337)
SAE AMS6396 Steel Sheet, Strip, and Plate, 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed
SAE AMS4285 Aluminum Alloy Castings, Centrifugal, 7.0Si - 0.30Mg (356.0-T6), Solution and Precipitation Heat Treated
SAE AMS3175 Non-Chromated Surface Pretreatment Prior to Painting
SAE AS28915 Bearing, Roller, Self-Aligning, Double Row Torque Tube, Airframe, Anti-Friction, Sealed, Type Iv
SAE AMS5552 Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 46Fe - 20.5Cr - 32Ni - 1.1Ti, Annealed (Cancel
SAE AMS3315 Silicone (Vmq) Rubber Sheet, Glass Cloth Reinforced
SAE AMS3799/4 Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10,008) Breaking Strength
SAE AMS3799 Webbing, Tubular, Low Modulus Aramid-54
SAE AMS3799/3 Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17,793) Breaking Strength
SAE AMS3799/1 Webbing, Tubular, Low Modulus Aramid 9/16 (14) Wide, 1400 (6228) Breaking Strength
SAE AMS3799/2 Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength
SAE AIR4246 Contaminants for Aircraft Turbine Engine Fuel System Component Testing
SAE AS7251 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 掳F Use, UNJ Thread Form
SAE AS7253 Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 掳F, Procurement Specification
SAE AS7250 Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 掳F Use, UN Thread Form
SAE AS5379 Valves, Safety, Cabin Air, General Specification For (Cancelled Apr 2011)
SAE AS4167 Wrenches; Flared Nut, Crowfoot, 12-Point Non-distorting
SAE ARP6253 LEDs and Aircraft Applications
SAE AS5780 Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants
SAE AMS5387 Alloy, Corrosion and Heat Resistant, Investment Castings, 60Co - 29Cr - 4.5W, As Cast
SAE AMS4490 Magnesium Alloy Castings, Die, 9.0Al - 0.70Zn (AZ91D, Temper F), As Cast
SAE ARP5718 Qualification Process for SAE AMS1428 Type II, III, and IV Fluids
SAE J1555 Recommended Practice for Optimizing Automobile Damageability and Repairability
SAE AS85049/96 Connector Accessories, Electrical, Mounting Device Flange Type, Category 7, 1/4 Perimeter
SAE AS85049/94 Connector Accessories, Electrical, Mounting Device, Flange Type, Category 7, Full Perimeter
SAE ARP4169 Night Vision Goggle (Nvg) Filters
SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat
SAE AMSQQA250/5 Aluminum Alloy Alclad 2024, Plate and Sheet
SAE AMSQQA250/4 Aluminum Alloy 2024, Plate and Sheet
SAE AS5234 Nut, Coupling, Flareless
SAE AMSQQA250/10 Aluminum Alloy 5454, Plate and Sheet (NONCURRENT Sep 2007)
SAE AMS4297 Aluminum Alloy Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet), Solution Heat Treated, High Formability
SAE AMS4194 Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn, Solution Heat Treated and Cold Worked (NONC
SAE AMS4040 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-0), Annea
SAE ARP1971 Aircraft Deicing Vehicle - Self-Propelled
SAE AIR6198 Considerations for future more electric aircraft electric power systems
SAE AS39029/31 Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-DTL-26482 Series 1, MIL-DTL-26500 and MIL-D
SAE J2972 Definition of Automotive Hands-Free Operation of a Person-to-Person Voice and/or Data Wireless
SAE AS85049/47 Connector Accessories, Electrical, Strain Relief, 90掳, Self-Locking and Non-Self-Locking, Category 4C (Fo
SAE AS683 Installation Procedures and Torques for Fluid Connections
SAE AS39029/32 Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-26482 Series 1, MIL-DTL-26500 and MI
SAE AS1212 Electric Power, Aircraft, Characteristics and Utilization Of
SAE AIR6199 An Industry Recommended Practice Documenting a Method for Evaluating and Substantiating Airplane Passenger S
SAE AS5272 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
SAE ARP4255 Electrical Actuation Systems for Aerospace and Other Applications
SAE ARP6200 Test Requirements and Methods for Commercial Aircraft Hydraulic Systems
SAE AIR1678 Uncertainty of In-Flight Thrust Determination
SAE AMS6350 Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6370 Steel, Bars, Forgings, and Rings, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6351 Steel, Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Spheroidized
SAE AMS3670 Polyamide-Imide Bar, Rod, and Shapes, Molded Or Extruded
SAE AS85049/33 Connector Accessories, Electrical, Backshell, Nonenvironmental, Straight, Shielded Termination, Category
SAE AS85049/32 Connector Accessories, Electrical, Backshell, Nonenvironmental, 90掳, Shielded Termination, Category 3C (F
SAE AMS6357 Steel Sheet, Strip, and Plate, 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735)
SAE AMS6356 Steel, Sheet, Strip, and Plate, 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132)
SAE AMS6312 Steel Bars, Forgings, and Tubing, 1.8Ni - 0.25Mo (038 - 0.43C) (SAE 4640)
SAE AMS6300 Steel Bars and Forgings, 0.25Mo (0.35 - 0.40C) (SAE 4037)
SAE AMS3670/3 Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite-3 Polytetrafluoroethylene (PTFE) Filled
SAE AMS3670/1 Unfilled Polyamide-Imide Bar, Rod, and Shapes
SAE AMS3670/4 Polyamide-Imide Bar, Rod, and Shapes, 30% Glass Fiber
SAE AMS3670/5 Polyamide-Imide Bar, Rod, and Shapes, 30% Carbon Fiber
SAE AMS3655 Tubing, Electrical Insulation, Thin Wall, Extruded Polytetrafluoroethylene (Ptfe)
SAE AMS3653 Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluroethylene (Ptfe)
SAE AMS3654 Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluorethylene (Ptfe)
SAE AIR6151 Torque, Threaded Application, Electrical Connector and Accessory Installation
SAE AMSWWT700/6 Tube, Aluminum Alloy, Drawn, Seamless, 6061
SAE AS20708/20 Synchro, Control Transmitter, Type 15CX6C
SAE AS9103 Variation Management of Key Characteristics
SAE AIR6130 Cadmium Plate Cyclic Corrosion Test
SAE AMS4640 Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings, 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe, Drawn and Stress
SAE AMS3220 Rubber, Synthetic, General Purpose, Fluid Resistant, 55 - 65
SAE AMS3195 Silicone Rubber Sponge, Closed Cell, Medium
SAE AMS4154 Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Soluti
SAE ARP4868 Function-Based API for Gas Turbine Engine Performance Programs
SAE AMSR3065 Rubber, Fabricated Products (Cancelled May 2011)
SAE AMS3194 Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature
SAE AMS3193 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS6417 Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C), Consumable Electr
SAE ARP5526 Aircraft Seat Design Guidance and Clarifications
SAE AMS6419 Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C), Consumable Electr
SAE AS5725 Interface Standard, Miniature Mission Store Interface
SAE AMSB20148 Brazing Sheet, Aluminum Alloy
SAE AMS6476 Steel, Bars, Forgings, and Tubing, 0.50Cr - 0.12Mo (0.89 - 1.01C)
SAE AMS6422 Steel, Bars, Forgings, and Tubing, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40
SAE AMS6421 Steel, Bars, Forgings, and Tubing, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)
SAE AMS6425 Steel, Bars, Forgings, and Tubing, 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C), Consumable Electr
SAE AMS6250 Steel Bars, Forgings, and Tubing, 1.5Cr - 3.5Ni (0.07 - 0.13C) (3310)
SAE AMS4944 Titanium Alloy Tubing, Seamless, Hydraulic, 3.0Al - 2.5V, Cold Worked, Stress Relieved
SAE AMS6257 Steel Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrod
SAE AMS7909 Aluminum Beryllium, NNS Preforms, Hot Isostatic Pressed, 38Al - 62Be
SAE AMS5350 Steel, Corrosion and Moderate Heat-Resistant, Investment Castings, 12.5Cr (SAE 51410), Hardened and Tempered
SAE AMS4934 Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
SAE AMS4920 Titanium Alloy, Forgings, 6Al - 4V, Alpha-Beta or Beta Processed, Annealed
SAE AMS4417 Castings, Sand, Magnesium Alloy, 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21 - T6), Solution and Precipitation Hea
SAE AMS4085 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AIR6082 Calculations to Determine Dimensions for Backup Rings to AS5781, AS5782, AS5860, AS5861
SAE AIR1823 Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS (Cancelled May 2011
SAE AMS5647 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 19Cr - 9.5Ni, Solution Heat Treated
SAE AMS5653 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 17Cr - 12Ni - 2.5Mo (0.030 Max
SAE AMS5654 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 11Ni - 0.60Cb (Nb) (347
SAE AMS4987 Titanium Alloy, Forgings, 10V - 2Fe - 3AI, Consumable Electrode Melted, Single-Step Solution Heat Treated an
SAE AMS4986 Titanium Alloy, Forgings, 10V - 2Fe - 3Al, Consumable Electrode Melted, Single-Step Solution Heat Treated an
SAE AMS4983 Titanium Alloy, Forgings, 10V - 2Fe - 3Al, Consumable Electrode Melted, Single-Step Solution Heat Treated an
SAE ARP4084 Aircraft Ground Service Connections Locations and Type
SAE AS6075 FITTING, BOLT, FLARED, 37掳 SPHERICAL
SAE AS6092 FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75掳
SAE AS6095 FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE
SAE AS6094 FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45掳
SAE AS6098 FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL ON SIDE, FLARED, 37 DEGREE SPHERICAL
SAE ARP5021 Oxygen Cylinder Installation Guide
SAE AMS5862 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu, Consumable Electrod
SAE AMS4472 Aluminum Alloy, Plate, 4.0Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.35Ag - 0.13Zr (2195-T34), Solution Heat Treated a
SAE AS85049/132 Connector Accessories, Fiber Optic Backshell 45掳, Self-Locking Category 3B for MIL-DTL-38999 Series III
SAE AS6093 FITTING, 37掳 SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90掳
SAE AS60491 AS60491- Sleeve, Post Wrap, For Cable and Harness Protection
SAE ARP6461 Guidance on Structural Health Monitoring for Aerospace Applications
SAE AMS6447 Steel, Bars, Forgings, and Tubing, 1.4Cr (0.93 - 1.05C) (SAE 52100), Electroslag Remelted
SAE AMS7276 Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set for Seals in Fuel systems an
SAE AMS6440 Steel, Bars, Forgings, and Tubing, 1.45Cr (0.93 - 1.05C) (SAE 52100), For Bearing Applications
SAE AMS6444 Steel, Bars, Forgings, and Tubing, 1.45Cr (0.93 - 1.05C) (SAE 52100), Premium Aircraft-Quality, Consumable E
SAE MA3374 Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
SAE AMS2515 Polytetrafluoroethylene (PTFE) Resin Coating, Low Build, 370 to 400 掳C (698 to 752 掳F) Fusion
SAE AMS4904 Titanium Alloy Sheet, Strip, and Plate, 6Al - 4V, Solution Heat Treated and Aged
SAE AS3625 Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286 Silver Plated Threads Only
SAE AS3626 Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, C'Bore Silver Plated Threads Only
SAE AMS7273 Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil resistant for Seals in Fuel systems and Specific
SAE AMS6479 Steel, Bars, Forgings, and Tubing, 1.45Cr (0.98 - 1.05C) (SAE 52100), Special Aircraft-Quality Cleanliness
SAE AMS4903 Titanium Alloy Sheet, Strip, and Plate, 6Al - 4V, Solution Heat Treated
SAE AMS3217/4 Test Slabs, Fluoroelastomer (FKM), 65 - 75
SAE AS85049/87 Connector Accessories, Electrical, Backshell, 90 Degree, Self-Locking, Shield Band Termination (RFI/EMI),
SAE AMS6358 Steel Sheet, Strip, and Plate, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)
SAE AMS2473 Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
SAE AMS3374 Sealing Compound Aircraft Firewall
SAE AMS3333 Sealing Compound, Polysulfide, For Aircraft Windshields and Canopies, For Use up to 250 掳F (121 掳C)
SAE AMS3373 Compound, Silicone Rubber, Insulating and Sealing 35 to 55
SAE AMS2694 In-Process Welding of Castings
SAE AS4491 Plastic Disposable Cartridge, Plunger, Nozzles and Cartridge Assembly
SAE ARP693 Landing and Taxiing Lights - Design Criteria for Installation
SAE AMS7290 Decalcomanias (Cancelled Jun 2009)
SAE AMS3696 Aerodynamic Fairing Compound, -55 to +85Mdc (-65 to +185Mdf)
SAE AMS3697 Aerodynamic Fairing Compound, -55 to +150Mdc (-65 to +300Mdf)
SAE AMS3694 Aerodynamic Smoothing Compound, Flexible, -55 to +130Mdc (-65 to +270Mdf)
SAE AMS3373/2 Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Medium Viscosity, Room Tem
SAE AMS3378 Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant
SAE AMS3375 Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
SAE AMS3364 Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, D
SAE AMS3366 Silicone Rubber Compound, Room Temperature Vulcanizing, 55,000 Centipoise Viscosity, Durometer 55-70 (NONCUR
SAE AMS3368 Silicone Resin, Elastomeric, Transparent, Elevated Temperature Cure
SAE AMS3370 Silicone Resin, Elastomeric, Transparent, Room Temperature Cure
SAE AMS3372 Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure
SAE AMS3373/1 Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Low Viscosity, Room Temper
SAE AMS3358 Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 PaMks) Viscosity
SAE AMS3361 Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 PaMks) Viscosi
SAE AMS3363 Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30-45
SAE AMS3362 Silicone Rubber Compound Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35-55
SAE AMS3126 Aluminum Coating Material, Corrosion and Heat Resistant, Thermosetting, Inorganic Binder (NONCURRENT Aug 200
SAE AMS3125 Enamel, Glyceryl Phthalate, Engine Gray Baking (Cancelled Jun 2009)
SAE AMS3122 Enamel, Phenolic, Black Baking (Cancelled Jun 2009)
SAE AMS3120 Enamel, Glyceryl Phthalate, Black Baking (Cancelled Jun 2009)
SAE AMS3135 Coating Material, Silicone Resin, 400 掳F (205 掳C) (Cancelled Jun 2009)
SAE AMS3132 Varnish, Phenolic Resin, Corrosion-Preventive (Cancelled Jun 2009)
SAE AMS3130 Paint, Vehicle, Glyceryl Phthalate (Cancelled Jun 2009)
SAE AMS3110 Primer, Zinc Chromate (Cancelled Jun 2009)
SAE AMS3140 Coating, Urethane, Aliphatic Isocyanate, Polytetrafluoroethylene Filled (NONCURRENT Oct 2007)
SAE AIR3270 Aircraft Sealant Removal Techniques
SAE AIR4275 Jet Reference Fluid Study for Fuel Tank Sealants
SAE AS5304 Standard Specification for Turbine Flowmeters
SAE AS3611 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cobalt-Nickel Alloy UNS R30159, 260 Ksi Min
SAE AMS4905 Titanium Alloy, Damage-Tolerant Grade Plate, 6Al - 4V, Beta Annealed
SAE AS4735 Female Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding Swaged
SAE AS6254 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)
SAE MA4872 Paint Stripping of Commercial Aircraft - Evaluation of Materials and Process
SAE ARP5058 Enclosed OperatorS Cabin for Aircraft Ground Deicing Equipment
SAE AMS1385 Compound, Hot Carbon and Paint Remover Aircraft Turbine Engine Components
SAE ARP5526 Aircraft Seat Design Guidance and Clarifications
SAE AS8017 Minimum Performance Standard for Anticollision Light Systems
SAE AS81935 Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 掳F)
SAE AIR6448 Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Option 7b
SAE AS640 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, Straight to Straight
SAE AS81935/4 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Externally Threaded, -65 to +325 degres
SAE AS81935/5 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded -65 to +325 掳F
SAE AS81935/9 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Internally Threaded, Corrosion Resistant
SAE AS81935/6 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, Steel, Corrosion Resi
SAE AS81935/7 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, Steel, Corrosion Resi
SAE AS81935/8 Bearing, Plain, Rod End, Self Aligning, Self Lubricating, Narrow, Externally Threaded,Steel, Corrosion Res
SAE AS81935/1 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Externally Threaded, -65 to +325 掳F
SAE AS81935/2 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, -65 to +325 掳F
SAE AIR4487 Investigation of Silver Plated Conductor Corrosion (Red Plague)
SAE AS85028 Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specific
SAE AS70991 Terminals: Lug and Splice, Crimp Style, Aluminum, For Aluminum Aircraft Wire
SAE AS650 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45掳 to 45掳
SAE AS649 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 90掳
SAE AS648 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 45掳
SAE AS651 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45掳 to 90掳
SAE AS642 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, Straight to 90掳
SAE AS644 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 45掳 to 90掳
SAE AS5488 Regional Aircraft Towbar Attach Fitting Interface (STABILIZED Jun 2011)
SAE AS39029/12 Contacts, Electrical Connector, Socket, Crimp-Removable (For AS81659 Series 2 Connectors)
SAE AS39029/11 Contacts, Electrical Connector, Pin, Crimp-Removable (For AS81659 Series 2 Connectors)
SAE AS1065 Quality and Serviceability Requirements for Aircraft Cylinder Assemblies Charged With AviatorS Breathing Oxyg
SAE ARP4926 Alloy Verification and Chemical Composition Inspection of Welding Wire
SAE ARP6402 LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
SAE AS652 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 90掳 to 90掳
SAE AS643 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 45掳 to 45掳
SAE AS647 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to Straight
SAE AS645 Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flared, 90掳 to 90掳
SAE AS3414 Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .250-28UNJF-3A (Stress Rupture Resistant)
SAE AMS6932 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V Extra Low Interstitial, Annealed
SAE AMS6930 Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged