当前位置: 网站地图

所有标准资料

SAE AS520 Drive Accessory 6.500 Pilot Diameter - Qad (NONCURRENT Oct 2001)
SAE AS522 Flange Accessory 3.000 Pilot Diameter - Qad (NONCURRENT Oct 2001)
SAE AS519 Drive Accessory 4.125 Pilot Diameter - Qad (NONCURRENT Oct 2001)
SAE AS46 Generator, Mounting Pad and Drive, 4 Bolt (NONCURRENT Oct 2001)
SAE AS439 Stall Warning Instrument (Turbine Powered Subsonic Aircraft)
SAE AS3410 Bolt, Tee Head, Ams 5662, Chamfered, .250-28unjf-3a (Stress Rupture Resistant)
SAE AS3411 Bolt, Tee Head, AMS 5662, Chamfered, .3125-24UNJF-3A (Stress Rupture Resistant)
SAE AS3412 Bolt, Tee Head, Ams 5662, Chamfered, .375-24unjf-3a (Stress Rupture Resistant)
SAE AS3232 Bolt, Tee Head - AMS 5708, Chamfered, .1900-32 UNJF-3A
SAE AS291 Surface Texture, Roughness, Waviness and Lay (NONCURRENT Oct 2001)
SAE AS24585 Spring, Helical, Compression: for Loads Below 20 Pounds
SAE AS24586 Spring, Helical, Extension: For Loads Below 30 Pounds
SAE AS177 Operating Instructions for Aircraft Engines (Preparation of)
SAE AS176 Limits, Table of Limits and Lubrication Charts
SAE AS1105 Service Time Coding of Propulsion Engine Items (NONCURRENT Oct 2001)
SAE AS107 Surface Finish (RMS) (NONCURRENT Oct 2001)
SAE ARP843 Chip Detector, Electrical Connection, Remote Indicating
SAE ARP671 Bearing, Ball Annular (NONCURRENT Oct 2001)
SAE ARP573 Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems
SAE ARP5366 Autopilot, Flight Director, and Autothrust Systems
SAE ARP510 Moment Weight of Turbine and Compressor Rotor Blades
SAE ARP5497 Modification Or Replacement of Components on Dynamically Certified Seat Systems
SAE ARP4868 Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Di
SAE ARP416 Directional Indicating System (Turbine Powered Subsonic Aircraft)
SAE ARP419 Automatic Pilot Installations
SAE ARP1902 Bolt, Tee Head, Interface Surface, Dimensions for
SAE ARP246 Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines
SAE ARP1515 Threaded Fastener Protrusion Through Self-Locking Nuts
SAE ARP1107 Tail Bumpers for Piloted Aircraft
SAE ARP1231 Gland Design, Elastomeric O-Ring Seals, General Considerations
SAE AMS7717 Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50Ni - 50Fe, Annealed, Forming Grade
SAE AMS6543 Steel, Bars and Forgings, Maraging 2.0cr 10ni 8.0co 1.0mo (0.10-0.14c) Double Vacuum Melted, Solution Heat T
SAE AMS6478 Steel, Bars and Forgings 3.1cr 11.5ni 13.5co 1.2mo (0.21 - 0.25c) Vacuum Melted, Annealed Heat Treatable to
SAE AMS5884 Iron-Nickel Alloy, Bars, Forgings, and Rings, 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti, Solution Heat Treated, P
SAE AMS5852 Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Po
SAE AMS5781 Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.10n (Cancelled
SAE AMS5672 Steel Wire, Corrosion Resistant, 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu, Precipitation Hardenable, S
SAE AMS5586 Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 57ni 19.5cr 13.5co 4.2mo 2.9ti 1.4al 0.006b 0.08zr
SAE AMS5335 Steel Castings, Sand, 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered (
SAE AMS5110 Carbon Steel, Wire and Springs 0.75 0.88c (SAE 1080) Spring Temper, Cold Drawn
SAE AMS5077 Steel Tubing, Welded, (0.22 - 0.28C) (SAE 1025), Normalized or Stress Relieved
SAE AMS4632 Aluminum Bronze Bars and Rods 90cu 8.5al, Hard (Cancelled Oct 2001)
SAE AMS4310 Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat
SAE AMS4335 Forgings, Aluminum Alloys, 2xxx and 7xxx, Heat-Treated, Finished-Part Properties: Short-Transverse Tensile P
SAE AMS4266 Aluminum Alloy, Sheet, 6.5Fe - 1.3Si - 0.60V (8022-H112), Powder Metallurgy Product, Strain Hardened (NONCUR
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS2451/11 Plating, Brush, Cobalt
SAE AIR809 Metal Dimensional Change with Temperature
SAE AIR1551 Torque Tightening Metric Screw Threaded Fasteners
SAE AIR1754 Washer, Thermal Compensating, Metric Series
SAE AIR1810 Design, Development and Test Criteria-Solid State Proximity Switches/Systems for Landing Gear Applications
SAE AMS2406 Plating, Chromium Hard Deposit
SAE AMS6382 Steel, Bars, Forgings and Rings, 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140), Annealed
SAE AMS5694 Steel, Corrosion and Heat-Resistant, Welding Wire, 27Cr - 21.5Ni
SAE AMS5608 Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 40Co - 22Cr - 22Ni - 14.5W - 0.07La, So
SAE AMS2759/7 Carburizing and Heat Treatment of Carburizing Grade Steel Parts
SAE AMS2301 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
SAE AMS5560 Steel, Corrosion Resistant, Seamless Tubing, 19Cr - 10Ni (SAE 30304), Solution Heat Treated
SAE AMS6519 Steel, Maraging, Bars, Forgings, Tubing, and Rings, 19Ni - 3.0Mo - 1.4Ti - 0.10Al, Double Vacuum Melted, Ann
SAE AMS6433 Steel, Sheet, Strip and Plate, 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33-0.38C)
SAE AMS6330 Steel Bars, Forgings, and Tubing, 0.65Cr - 1.25Ni (0.33-0.38C)
SAE AMS6378 Steel Bars, 1.0Cr - 0.20Mo - 0.045Se (0.39 - 0.48C) (4142H Modified), Die-Drawn, 130 ksi (896 MPa) Yield Str
SAE AMS6365 Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135), Normalized or Stress Relieved
SAE AMS6272 Steel Bars, Forgings, and Tubing, 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)
SAE AMS5637 Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated and Cold Drawn, 1
SAE AMS5593 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W
SAE AMS5585 Alloy, Corrosion and Heat Resistant, Welded Tubing, 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb - 0.15N,
SAE AMS5525 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
SAE AMS5077 Steel Tubing, Welded, (0.22 - 0.28C) (SAE 1025), Normalized or Stress Relieved
SAE AMS5075 Steel Tubing, Seamless, 0.22 - 0.28C (SAE 1025), Cold Drawn and Stress Relieved
SAE AS13572 Springs, Helical, Compression and Extension
SAE AS55151 Pump, Hydraulic, Ram, Hand Driven
SAE AMS4143 Aluminum Alloy, Forgings and Rolled Or Forged Rings 6.3cu 0.3mn 0.18zr 0.10v 0.06ti, Solution and Precipitat
SAE AMS4128 Aluminum Alloy, Bars, Rolled Or Cold Finished 1.0mg 0.60si 0.30cu 0.20cr (6061-T451) Solution Heat Treated a
SAE AMS4111 Aluminum Alloy, Forgings 7.7zn 2.5mg 1.5cu 0.16cr, Solution and Precipitation Heat Treated
SAE AMS4102 Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated (Cancelled Nov 2001)
SAE AMS5604 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb, Solution Heat Treated,
SAE AMS4289 Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat Treated
SAE AMS2429 Plating, Bronze, Nitriding Stop-Off, 90Cu - 10Sn
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS4926 Titanium Alloy, Bars, Wire, and Rings, 5al 2.5sn, Annealed, 110 Ksi (758 Mpa) Yield Strength
SAE AMS4025 Aluminum Alloy, Sheet and Plate, 1.0mg 0.60si 0.28cu 0.20cr Annealed
SAE AMS4288 Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6), Solution and Precipitation Heat Treated
SAE AMS5613 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12.5Cr (SAE 51410), Annealed
SAE AMS3168 Aqueous Cleaners for Cleaning Prior to Application of Sealing Compounds
SAE AMS5674 Steel, Corrosion and Heat Resistant, Wire, 18Cr - 11.5Ni - 0.70Cb (SAE 30347), Solution Heat Treated
SAE AMS5655 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-
SAE AMS5614 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12Cr - 0.50Mo, Annealed
SAE AMS5553 Nickel, Sheet and Strip, Low (0.02 max) Carbon, Annealed
SAE AMS4910 Titanium Alloy, Sheet, Strip, and Plate, 5al 2.5sn, Annealed
SAE AMS4907 Titanium Alloy Sheet, Strip, and Plate, 6.0al 4.0v, Extra Low Interstitials, Annealed
SAE AMS4507 Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Half Hard (H02)
SAE AMS4427 Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat Treated
SAE AMS4330 Aluminum Alloy, Plate (2297-T87) - 2.8cu - 1.5li - 0.30mn - 0.25mg - Solution Heat Treated, Stret
SAE AMS4077 Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Annealed
SAE AMS5798 Alloy Welding Wire, Corrosion and Heat Resistant 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe
SAE AMS5828 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0
SAE AMS5506 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 13Cr (0.30 - 0.40C) (SAE 51420), Annealed
SAE AMS5914 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti -
SAE AMS5859 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu, Consumable Elec
SAE AMS5823 Steel, Corrosion and Heat Resistant, Welding Wire, 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V
SAE AMS5830 Nickel-Iron Alloy, Corrosion and Heat Resistant, Welding Wire 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 35F
SAE AMS5805 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V, Vacuum In
SAE AMS5811 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0
SAE AMS5818 Steel, Corrosion and Heat Resistant, Welding Wire, 9.0Mn - 20Cr - 6.2Ni - 0.20N
SAE AMS5819 Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire, 62Co - 27Cr - 2.9Ni - 5.5Mo
SAE AMS5778 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72ni 15.5cr 1.0cb 2.4ti 0.70al 7.0fe
SAE AMS5697 Steel, Corrosion Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated
SAE AMS5689 teel, Corrosion and Heat Resistant, Wire, 18Cr - 10.5Ni - 0.40Ti (SAE 30321), Solution Heat Treated
SAE AMS5675 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe
SAE AMS5505 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 12Cr (SAE 51410 Modified), Ferrite Controlled,
SAE AMS5504 Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant 12.5Cr (SAE 51410) Annealed
SAE AMS4898 Titanium Alloy, Sheet 6al 2sn 2zr 2mo 2cr 0.15si Annealed
SAE MAM2625 Pressure Testing, Hydraulic, 17.5 Mpa (Cancelled Nov 2001)
SAE MAM2616 Pressure Testing, Hydraulic, 1380 Kpa (Cancelled Nov 2001)
SAE MAM2615 Pressure Testing, Hydraulic, Pressure as Specified, Metric (Cancelled Nov 2001)
SAE MAM2620 Pressure Testing, Hydraulic, 6895 Kpa (Cancelled Nov 2001)
SAE AMS7719 Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50Ni - 50Fe, Stamping Quality, Half-Hard Temper
SAE AMS7304 Springs, Steel, 0.85 - 1.05C, Hardened and Tempered After Forming (NONCURRENT November 2001)
SAE AMS6342 Steel Bars, Forgings, and Tubing, 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) (NONCURRENT)
SAE AMS4253 Aluminum Alloy, Aramid Fiber Reinforced-Laminated Sheet, 5.7zn 2.2mg 1.6cu 0.22cr, 3, 5, 7, Or 9 Ply (NONCUR
SAE AMS4176 Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5056, 350 (175) (Cancelled Nov 2001)
SAE AMS4175 Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5052, 350 (175) (Cancelled Nov 2001)
SAE AMS2616 Pressure Testing, Hydraulic, 200 Psi (Cancelled Nov 2001)
SAE AMS2620 Pressure Testing, Hydraulic, 1000 Psi (Cancelled Nov 2001)
SAE AMS2625 Pressure Testing, Hydraulic, 2500 Psi (Cancelled Nov 2001)
SAE AS9360 Nut, Plain, Hexagon - Drilled, Silver Plated - Uns S66286, 130 Ksi Min
SAE AS9358 Nut, Plain, Castellated, Hexagon-UNS S66286, 130 ksi Min
SAE AS92001 Nut, Hexagon, Drilled, Boss Connection, Aluminum - UNS A92014
SAE AS90991 Nut - Hex, Boss Connection, Aluminum
SAE AS5389 Pallet Lift Truck and Container Fork Pocket Interface
SAE AS5206 Nut, Flared, Long
SAE ARP868 Method-Pressure Drop Tests for Fuel System Components
SAE AMS4219 Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P), Solution and Precipitation Heat Tre
SAE AS81935 Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For
SAE AS7481 Studs, Steel, UNS S66286, Aged After Roll Threaded, Procurement Specification For (NONCURRENT Dec 2001)
SAE AS5406 Fitting, Union, Tube, .375 Bulkhead
SAE AS9520 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .3125-24 UNJF-3A
SAE AS9881 Nut, Plain, Hexagon, Cadmium Plated, UNS G87400, 125 ksi Min
SAE AS9882 Nut, Plain, Hexagon - Drilled, Cadmium Plated - UNS G87400, 125 ksi Min
SAE AS9453 Bolt, Machine, Hexagon Head Steel, .3125-24 Unjf-3a
SAE AS9455 Bolt, Machine, Hexagon Head, Steel, .4375-20 Unjf-3a
SAE AS9450 Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi Min, .1640
SAE AS9451 Bolt, Machine, Hexagon Head, Steel, .190-32 Unjf-3a
SAE AS9452 Bolt, Machine, Hexagon Head, Steel, .250-28 Unjf-3a
SAE AS9449 Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi Min, .1380-40 UNJF-3
SAE AS9516 Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1380-40 UNJF-3A
SAE AS9517 Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1640-36 UNJF-3A
SAE AS9518 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .1900-32 UNJF-3A
SAE AS9521 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .3750-24 UNJF-3A
SAE AS9523 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .5000-20 UNJF-3A
SAE AS9525 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .6250-18 UNJF-3A
SAE AS9526 Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi Min, .7500-16 UNJF-3A
SAE AS9457 Bolt, Machine, Hexagon Head, Steel, .5625-18 Unjf-3a
SAE AS9458 Bolt, Machine, Hexagon Head, Steel, .5625-18 Unfj-3a
SAE AS9456 Bolt, Machine, Hexagon Head, Steel, .500-20 Unjf-3a
SAE ARP5374 Method of Testing Pre-Conditioned Air Equipment
SAE ARP1907 Automatic Braking Systems Requirements
SAE ARP1201 Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings
SAE AIR1904 Tire Spray Suppression - Airplane Design and Consideration for
SAE AIR1174 Index of Starting System Specifications and Standards
SAE AS7413 Coupling Assemblies, Quick Disconnect, Automatic Shutoff
SAE ARP4737 Aircraft Deicing/Anti-Icing Methods With Fluids
SAE ARP4256 Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft
SAE AS5176 Fitting, Sleeve, Flared
SAE AS3480 Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3479 Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286 125 ksi/800 掳F
SAE AS3478 Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3482 Nut, Self-Locking, Plate, Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksiI/800 掳
SAE AS3481 Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/80
SAE ARP5824 Recommended Solid Film Lubricants for Fluid System Components
SAE ARP4102/9 Flight Management System (FMS)
SAE ARP147 Environmental Control Systems Terminology
SAE AIR825/1 Introduction to Oxygen Equipment for Aircraft
SAE AIR825/11 Closed-Cycle Protective Breathing Devices
SAE AS6055 Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches)
SAE AS5134 Aviation Distress Signal
SAE AS24347 Drums, Metal, Reusable Shipping and Storage
SAE AIR5273 Actuation System Failure Detection Methods
SAE AS9131 Quality Systems Non-Conformance Documentation
SAE AMS4784 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature, 50Au - 25Pd - 25Ni, 2015 to 2050 掳F (11
SAE AMS4786 Gold-Palladium-Nickel Alloy Brazing Filler Metal, High Temperature, 70au 8.0pd 22ni, 1845 to 1915Mdf (1007 t
SAE AMS4785 Gold-Palladium-Nickel Alloy Brazing Filler Metal, High Temperature, 30au 34pd 36ni, 2075 to 2130Mdf (1135 to
SAE ARP584 Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace
SAE AS264 Instrument and Cockpit Lighting for Commercial Transport Aircraft
SAE ARP493 Knobs, Control Aircraft, Recommended Design
SAE AS4300 Fitting Assembly, Cap, Flareless, Protective Closure, Low Pressure
SAE AMS5697 Steel, Corrosion-Resistant, Wire, 19Cr - 9.5Ni (SAE 30304), Solution Heat Treated
SAE AMS5504 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410), Annealed
SAE ARP4912 Design Recommendations for Spare Seals in Landing Gear Shock Struts
SAE AMS2615 Pressure Testing, Hydraulic, Pressure as Specified
SAE AMS4778 Nickel Alloy, Brazing Filler Metal, 92Ni - 4.5Si - 3.1B, 1800 to 1900 掳F Solidus-Liquidus Range
SAE AMS3117 Primer, Zinc Molybdate
SAE AMS2762 Carburizing, Carbon and Low-Alloy Steel Parts (NONCURRENT Jan 2002)
SAE AMS2643 Structural Examination of Titanium Alloys, Chemical Etch Inspection Procedure
SAE AMS4935 Titanium Alloy, Extrusions and Flash Welded Rings, 6al 4v, Annealed, Beta Processed
SAE AMS7879 Tungsten Carbide-Cobalt Powder, Cast and Crushed
SAE MAM2201 Tolerances, Metric, Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock, Rolled, Drawn, Or Cold Fi
SAE AMS4934 Titanium Alloy, Extrusions and Flash Welded Rings, 6al 4v, Solution Heat Treated and Aged
SAE AMS4914 Titanium Alloy, Cold Rolled Sheet and Strip, 15v 3al 3cr 3sn Solution Heat Treated
SAE AMS4195 Aluminum Alloy Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat
SAE AIR4779 UserS Guide to Ams Specifications
SAE AIR1069 Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 Ft.
SAE AMS6417 Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C), Consumable Electr
SAE AMS5936 Steel, Corrosion Resistant, Bars, Wire, and Forgings 12cr 11ni 1.7ti 1mo Vacuum Induction Plus Vacuum Consu
SAE AMS5628 Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing, 16Cr - 2.5Ni (SAE 51431)
SAE AMS5629 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuu
SAE AMS5537 Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate, 52Co - 20Cr - 10Ni - 15W, Solutio
SAE AMS2372 Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings
SAE AMS6267 Steel, Bars, Forgings, and Tubing, 1.2cr 3.25ni 0.12mo (0.07-0.13c) Electroslag Remelted Or Consumable Elect
SAE AMS3374 Sealing Compound Aircraft Firewall
SAE AMS2403 Plating, Nickel, General Purpose
SAE AMSS5626 Steel: Chrome-Molybdenum (4140) Bars Rods, and Forging Stock (For Aircraft Applications) (Cancelled Jan 20
SAE AMS5687 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 74Ni - 15.5Cr - 8.0Fe, Annealed
SAE AMS4924 Titanium Alloy, Bars, Forgings, and Rings 5a1 2.5sn, Extra Low Interstitial, Annealed
SAE AMS2451/9 Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
SAE AMSS18729 Steel Plate, Sheet, and Strip, Alloy 4130, Aircraft Quality (Cancelled Jan 2002)
SAE AMS6431 Steel, Bars, Forgings, and Tubing 1.05cr 0.55ni 1.0mo 0.11v (0.45-0.50c) Vacuum Consumable Electrode Melted
SAE AMS6425 Steel Bars, Forgings, and Tubing, 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C), Consumable Vacuum
SAE AMS6375 Steel, Welding Wire 0.50cr 0.55ni 0.20mo (0.18 0.23c) Vacuum Melted, Environment Controlled Packaging
SAE AMS5961 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 74Ni - 15.5Cr - 8.0Fe, Cold Reduced, Spring Temper
SAE AMS5877 Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2
SAE AMS5875 Cobalt Alloy, Corrosion and Heat-Resistant, Strip, 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe, Solution Heat Treated,
SAE AMS5797 Cobalt Alloy, Corrosion and Heat-Resistant, Covered Welding Electrodes, 51.5Co - 20Cr - 10Ni - 15W
SAE AMS5768 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb -
SAE AMS5642 Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 18Cr - 10.5Ni - 0.60Cb, Free-Machining, Solut
SAE AMS5592 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 44Fe - 18.5Cr - 35Ni - 1.15Si, Sol
SAE AMS5607 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 73Ni - 7.0Cr - 16.5Mo, Solution Heat Tr
SAE AMS5500 Steel, Corrosion-Resistant, Laminated, Sheet,Surface Bonded
SAE AMS5223 Iron-Nickel Alloy, Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated, Cold Rolled, 10% Redu
SAE AMS2451/10 Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
SAE AMS1452 Disinfectant, Aircraft, General Purpose
SAE AS7116/3 National Aerospace and Defense Contractors Accreditation Program Requirements for Electrical Discharge Mac
SAE ARP1923 Qualification and Certification of Etch Inspectors
SAE AIR825/4 Chemical Oxygen Systems
SAE AMS6409 Steel, Bars, Forgings, and Tubing 0.80cr 1.8ni 0.25mo (0.38-0.43c) Special Aircraft Quality Cleanliness, Nor
SAE AMSP83461/1 Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance At 275Mdf (135Mdc) Sizes a
SAE AS5116 Minimum Operational Performance Specification for Ground Ice Detection Systems
SAE AS81819/1 Bearings, Plain, Sliding Spherical, Self-Lubricating, Self- Aligning, High Speed Oscillation
SAE AS85421/1 Fitting End, Standard Dimensions for Dynamic Beam Seal, Male
SAE AS81765 Insulating Components, Molded, Electrical, Heat Shrinkable, General Specification For
SAE AS91761 Plug, Expansion - Tapered, Ams 5040
SAE AS85421/2 Fitting End, Standard Dimensions for Bulkhead, Dynamic Beam Seal, Male
SAE AS85352/4 Inflator Assembly Dual Chuck Stem Gage Kit
SAE AS85352/3 Inflator Assembly Gage Elements
SAE AS85352/2 Inflator Assembly Remote Controller Assembly
SAE AS85352 Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading
SAE AS85352/1 Inflator Assembly Kit
SAE AS81765/1 Insulating Components, Molded, Electrical, Heat Shrinkable Polyolefin, Crosslinked, Semi-Rigid and Flexib
SAE AS81765/2 Insulating Components, Molded, Electrical, Heat Shrinkable Polychloroprene, Flexible, Crosslinked
SAE AS81807 Marking of Aircraft Ground Support Equipment and Other Flight Line Vehicles With Retro-Reflective Materials
SAE AS81765/4 Insulating Components, Molded, Electrical, Heat Shrinkable Fluoroelastomer, Flexible, Crosslinked
SAE AS81765/3 Insulating Components, Molded, Electrical, Heat Shrinkable Silicone Rubber, Flexible, Crosslinked
SAE AS81765/7 Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer Composite, Semi-Rigid, Crosslink
SAE AS81765/6 Insulating Components, Molded, Electrical, Heat Shrinkable Fluoropolymer, Semi-Rigid, Crosslinked
SAE AS81366 Boundary Layer Control System; Pressure
SAE AS8039 Minimum Performance Standard General Aviation Flight Recorder
SAE AS28937 Fuse, Limiter Type, Enclosed Link, 5-60 Amp, Aircraft
SAE AS28938 Fuse, Limiter Type, Enclosed Link, Intermediate Rating, Aircraft
SAE AS25442 Dies, for MS25441, Hydraulic Crimping, Tool (For Use With Aluminum Wire Terminals)
SAE AS25438 Terminal-Lug, Crimp Style, Right Angle Type, for Aluminum Aircraft Wire, Class 1
SAE AS25472 Gage, In-Service-Inspection, for Use With MS25442 Crimping Dies (For Use With Aluminum Wire Terminals)
SAE AS24462 Bearing, Roller, Needle-Single Row, Thin Shell, Type Ii, Antifriction
SAE AS21440 Bearing, Roller, Needle, Track Roller, Integral Stud, Sealed, Type Viii, Antifriction, Inch
SAE AS210041 Canister, Lithium Hydroxide, Screened Ends, Friction Type Covers
SAE AS21004 Terminal, Lug, Uninsulated, Rectangular Tongue, Crimp Style, Copper, Type I, Class 1 for 175掳C Total Conduc
SAE AS17108 Bearing, Ball, Annular, Primarily for Aircraft Generators, Type Ii
SAE ARP688 Reusable Lock for Spanner Nuts
SAE ARP5486 Air Cargo Pallets - Utilization Guidelines
SAE AIR1389 Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft
SAE AS85376 Stand, Shipboard, Helicopter Maintenance
SAE AS4372 Performance Requirements for Wire, Electric, Insulated Copper Or Copper Alloy
SAE AIR5109 Applications of Probabilistic Methods
SAE AIR5479 Environmentally Compliant Processes for Landing Gear
SAE J2632 Embedded Software C Coding Practices
SAE AMS1428 Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian, (Pseudoplastic), SAE Types Ii, Iii, and Iv
SAE AMS4999 Titanium Alloy Laser Deposited Products - 6al - 4v - Annealed
SAE AS5394 Health and Usage Monitoring System, Advanced Multipoint Interface Specification
SAE AS1130 Air and Air/Surface (Platform) Cargo Pallets
SAE AMS3044 Magnetic Particles, Fluorescent, Wet Method, Dry Powder
SAE AMS2431/2 Peening Media (Ash) Cast Steel Shot, High Hardness (55 to 62 Hrc)
SAE AMS6345 Steel, Sheet, Strip, and Plate 0.95cr 0.20mo (0.28 - 0.33c) Normalized Or Otherwise Heat Treated
SAE AMS6274 Steel Bars, Forgings and Tubing 0.50cr 0.55ni O.20mo (0.18-0.23c)
SAE AMS3045 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-To-Use
SAE AMS6255 Steel, Bars, Forgings, and Tubing, 1.1si 1.45cr 1.0mo 0.08al (0.16-0.22c), Double Vacuum Melted
SAE AMS3414 Flux, Aluminum Welding
SAE AMS7850 Columbium (Niobium) Sheet, Strip, Plate, and Foil
SAE AMS6526 Steel, Bars, Forgings, Tubing and Rings, 1.0cr 7.5ni 4.5co 1.0mo 0.09v (0.29-0.34c), Consumable Electrode Va
SAE AMS6430 Steel Bars, Forgings, Tubing, and Rings, 0.75mn 0.78cr 1.8ni 0.35mo 0.20v (0.32-0.38c)
SAE AMS3417 Flux, Brazing, High Temperature
SAE AMS3043 Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
SAE AMS3040 Magnetic Particles, Nonfluorescent, Dry Method
SAE AMS3041 Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Ready-To-Use
SAE AMS3042 Magnetic Particles, Nonfluorescent, Wet Method, Dry Powder
SAE AMS3046 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
SAE AMS2431/1 Peening Media (Asr) Cast Steel Shot, Regular Hardness (45 to 52 Hrc)
SAE AMS1535 Cleaner, Transparent Plastic
SAE AIR1380 Recommended Practice for Measurement of Static Mechanical Stiffness Properties of Aircraft Tires (Cancelled
SAE ARP5607 Legibility of Print on Aerospace Wires and Cables
SAE AS90362 Connector, Receptacle, External Electric Power, Aircraft, 115/200 Volt, 400 Hertz
SAE AS85421/2 Fitting End, Standard Dimensions for Bulkhead, Dynamic Beam Seal, Male
SAE AS81021 Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip
SAE AS33698 Insert Arrangements, Electric Connector, Shell Size 3
SAE AS33699 Insert Arrangements, Electric Connector, Shell Size 7
SAE AS33702 Insert Arrangements, Electric Connector, Shell Size 27
SAE AS33701 Insert Arrangements, Electric Connector, Shell Size 19
SAE AS33703 Insert Arrangements, Electric Connector, Shell Size 37
SAE AS17845 Shield for Use With MS90362 - External Power Receptacles
SAE AS1066 Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated
SAE ARP1420 Gas Turbine Engine Inlet Flow Distortion Guidelines
SAE AIR5478 U.S. Government Document Retention Status and Non-Government Document Replacement - Aerospace Couplings, Fit
SAE AMSQQP416 Plating, Cadmium (Electrodeposited)
SAE ARP1876 Weldability Test for Weld Filler Metal Wire
SAE AIR4174 A Guide to Aircraft Power Train Monitoring
SAE AS7116/4 National Aerospace and Defense Contractors Accreditation Program Requirements for Laser Beam Machining (Lb
SAE AS7116/2 National Aerospace and Defense Contractors Accreditation Program Requirements for Electrochemical Grinding
SAE AS7116/1 National Aerospace and Defense Contractors Accreditation Program Requirements for Electrochemical Machinin
SAE AS7116 National Aerospace and Defense Contractors Accreditation Program Requirements for Nonconventional Machining
SAE AMS6419 Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C), Consumable Electr
SAE AMS5545 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.
SAE AMS2262 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate
SAE AMS2261 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
SAE AMS5622 Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, and Rings, 16cr 4.0ni 0.30cb 4.0cu Solution Heat T
SAE AMS5507 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 17Cr - 13Ni - 2.5Mo (SAE 30316L), Solution Hea
SAE AMS6501 Steel, Maraging, Welding Wire 18ni 8.0co 4.9mo 0.40ti 0.10a1 Vacuum Induction Melted, Environment Controlled
SAE AMS6533 Steel, Welding Wire 2.0cr 10ni 14co 1.0mo (0.13 0.17c) Vacuum Melted, Environment Controlled Packaging
SAE AMS5582 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe
SAE AMS5583 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe
SAE AMS4336 Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) - 8.0zn-2.3cu-2.0mg-0.16zr - Solution Heat Tr
SAE AMS4071 Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing, 2.5Mg - 0.25Cr (5052-0), Annealed
SAE AMS1630 Cleaner, Carpet, Shampoo Type
SAE AMS2759/6 Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts
SAE AS9463 Pin, Straight, Headed, .186 Diameter, Cres, UNS S66286
SAE AS9554 Screw, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi
SAE AS9574 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Res
SAE AS9557 Bolt, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi M
SAE AS9588 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .5000-20 UNJF-3A
SAE AS9584 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
SAE AS9585 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
SAE AS9587 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A
SAE AS9555 Screw, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi
SAE AS9573 Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Re
SAE AS9572 Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Re
SAE AS9583 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
SAE AS9579 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Res
SAE AS9576 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Re
SAE AS9575 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Pd Shank, Silver Plated, Corrosion and Heat Re
SAE AS9462 Pin, Straight, Headed, .124 Diameter, Cres, UNS S66286
SAE AS9465 Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
SAE AS9466 Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
SAE AS9464 Pin, Straight, Headed, .248 Diameter, Cres, Uns S66286
SAE AS9467 Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286
SAE AS6370 Wire, Electrical, Insulated, Antenna
SAE AS5491 Calculation of Electron Vacancy Number in Superalloys
SAE AMS4241 Aluminum Alloy, Castings 7.0si 0.58mg 0.15ti 0.06be (D357.0-T6) Solution and Precipitation Heat Treated Dend
SAE ARP1554 Auto Transport Unit Load Devices
SAE MA4038 Washer, Key - 180掳 Locking, Cres, UNS S32100, Metric
SAE AS85421/5 Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 Psi, Male on Run and Branch, Swivel Nut on Ru
SAE AS85421/4 Fitting, Tee, Reducer and Non-Reducer, Beam Seal, 3000/4000 Psi, Male on Run, Swivel Nut on Branch
SAE AS85421/3 Fitting, Tee, Reducer, Beam Seal, 3000/4000 Psi, 3 Male Ends
SAE AS85421/17 Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Branch, Male Ends
SAE AS85421/16 Fitting, Tee, Beam Seal, 3000/4000 Psi, Bulkhead on Run, Male Ends
SAE AS85421/15 Fitting, Elbow, 45Md, Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends
SAE AS85421/14 Fitting, Elbow, 90Md, Beam Seal, 3000/4000 Psi, Male to Female
SAE AS85421/13 Fitting, Elbow, 90Md, Beam Seal, 3000/4000 Psi, Bulkhead, Male Ends
SAE AS85421/12 Fitting, Elbow, 90Md, Beam Seal, 3000/4000 Psi, Male to Male
SAE AS85421/11 Fitting, Union, Beam Seal, 3000/4000 Psi, Male Ends
SAE AS85421/10 Fitting, Adapter, Beam Seal, 3000/4000 Psi, Male to Flareless
SAE AS3480 Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3479 Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3478 Nut, Self-Locking, Plate, Two Lug, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3482 Nut, Self-Locking, Plate, Side By Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 掳F
SAE AS3481 Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/80
SAE ARD50069 Neural Network Applications for Engine Condition Monitoring
SAE ARP1308 Preferred Electrical Connectors for Aerospace Vehicles and Associated Equipment (NONCURRENT Mar 2002)
SAE AIR1557 High and Extended Vibration Environment (Cancelled Mar 2002)
SAE AS5127/1 Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
SAE AS85848/1 Sleeving, for Identification Marking - Heat Shrinkable, Polyolefin, Flexible
SAE AS85848 Sleeving, for Identification Marking, Heat Shrinkable, General Specification For
SAE AS85848/2 Sleeving, for Identification Marking, Heat Shrinkable, Polyvinylidene Fluoride, Flexible
SAE AS85188 Riveter, Power, Pneumatic-Hydraulic - Blind Rivet Installation
SAE AS5127 Methods for Testing Aerospace Sealants
SAE AS33700 Insert Arrangements, Electric Connector, Shell Size 12
SAE AS21429 Bearing, Roller, Antifriction, Rod End, External Thread, Self-Aligning, Air Frame, -67 Degrees F, to 350 De
SAE ARP5584 Document for Electric Power Management
SAE AS9432 Bolt, Tee Head, Chamfered - Cres, Uns S66286, 130 Ksi Min, .1900-32 Unjf-3a
SAE AS9433 Bolt, Tee Head, Chamfered - Cres, Uns S66286, 130 Ksi Min, .2500-28 Unjf-3a
SAE AS9398 Bolt, Tee Head, Chamfered - Cadmium Plated, Steel, Uns G87400, 125 Ksi Min, .2500-28 Unjf-3a
SAE AS9397 Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .1900-32 UNJF-3A
SAE AS9434 Bolt, Tee Head, Chamfered - Cres, Uns S66286, 130 Ksi Min, .3125-24 Unjf-3a
SAE ARP5481 Recommended Wheel Tie Bolt Preload Procedure
SAE AIR825/5 Liquid Oxygen Systems
SAE AIR825/12 Oxygen System Integration and Performance Precautions
SAE AIR5784 A Review of Literature on the Relationship Between Gas Turbine Engine Lubricants and Aircraft Cabin Air Qual
SAE ARP5311 Aerospace-Interface Definition for Mechanical Actuation Subsystems
SAE ARD50102 Forced Air Or Forced Air/Fluid Equipment for Removal of Frozen Contaminants
SAE ARP9004 Direct Ship - Recommended Practices for Aerospace Companies
SAE AS81790 Connectors, Receptacle, External Electric Power, Aircraft General Specification For
SAE ARP1757 Symbology for Standardization of Cargo Handling Systems
SAE AIR1673 Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface
SAE ARP862 Skid Control Performance (Cancelled Apr 2002)
SAE ARP914 Glossary of Electrical Connection Terms (Cancelled Apr 2002)
SAE AIR4246 Contaminants for Aircraft Turbine Engine Fuel System Component Testing
SAE AMS2355 Quality Assurance Sampling and Testing of Aluminum Alloys and Magnesium Alloys, Wrought Products, Except For
SAE AMS4978 Titanium Alloy, Bars, Wire, Forgings and Rings, 6al 6v 2sn, Annealed
SAE AMS4921 Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70.0 Ksi (483 Mpa) Yield Strength
SAE MAM2355 Quality Assurance Sampling and Testing of Aluminum Alloys and Magnesium Alloys, Wrought Products, Except For
SAE AMS7902 Beryllium Sheet and Plate 98be
SAE AMS4958 Titanium Alloy, Bars and Rod, 3al 8v 6cr 4mo 4zr, Consumable Electrode Melted, Solution Heat Treated and Cen
SAE AMS2675 Brazing, Nickel Alloy Filler Metal
SAE AS9101 Quality System Assessment
SAE AS5370 Multi-Transmitter Bidirectional Fiber-Optic Data Bus for Distributed Aircraft Control Systems
SAE J1113/1 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (Up to 15
SAE AIR1093 Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays
SAE AS5457 Aerospace Standard for Hand-Held Wire Stripper Tools
SAE AIR1608 Estimation of Total Error in Altimetry
SAE AMS2700 Passivation of Corrosion Resistant Steels
SAE AMS2423 Plating, Nickel, Hard Deposit
SAE AMS2413 Plating, Silver-Rhodium
SAE AS5205 Nut, Fitting, Engine, Flared
SAE ARP5316 Storage of Elastomeric Seals and Seal Assemblies Which Include An Elastomer Element Prior to Hardware Assemb
SAE AS24563 Flange Profiles, V-Coupling, Design Standard
SAE AS9219 Bolt, Machine-Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, Uns K14675,
SAE AS9208 Bolt, Machine-Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Uns K14675, 195 Ksi
SAE AS5902 Installation of Externally Swaged Fittings
SAE AS1708 Fitting End, Internal Flare, Design Standard
SAE AIR4978 Temporary Methods for Assessing the Load Carrying Capacity of Aircraft Propulsion System Lubricating Oils
SAE AS85896 Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Speci
SAE AS85075/1 Tie Down Assembly, Helicopter Blade Ch-46 Helicopter
SAE AS85075/2 Tie Down Assembly, Helicopter Blade Ch-53 Helicopter
SAE AS5072/1 Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Di
SAE AS5072/2 Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Di
SAE AS5072/3 Coupling Assembly, .420 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Di
SAE AS5072 Coupling Assemblies, Non-Locking Probe Style, Miniature Self-Aligning, Self-Sealing Disconnects
SAE ARP5415 User's Manual for Certification of Aircraft Electrical/Electronic Systems for the Indirect Effects of Light
SAE AS85049/109 Connector Accessories, Electrical Backshell, Straight, Non-Self Locking and Self Locking, Pre-Attached
SAE AS85049/117 Connector Accessories, Electrical Backshell, 90 Degree, Self Locking, Pre- Attached Shield Termination (
SAE AS85049/115 Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached
SAE AS85049/114 Connector Accessories, Electrical Backshell, 90 Degree, Self Locking and Non-Self Locking, Pre-Attached
SAE AS85049/112 Connector Accessories, Electrical Backshell, Straight, Self Locking and Non-Self Locking, Pre-Attached
SAE AS85049/111 Connector Accessories, Electrical Backshell, 90 Degree, Self Locking and Non-Self Locking, Pre-Attached
SAE ARP599 Aerospace - Dynamic Test Method for Determining the Relative Degree of Cleanliness of the Downstream Side of
SAE ARP5448/6 Plain Spherical Bearing Conformity Examination
SAE AIR4777 Nondestructive Inspection (NDI) Methods Used During Production and Operation of Aircraft Wheels and Brakes
SAE AS8982 Wrenches, Twelve Spline, Inch
SAE AMS2644 Inspection Material, Penetrant
SAE ARP4712 Hand-Held Cabin Fire Extinguishers Transport Aircraft
SAE AMS4701 Copper Wire, Oxygen-Free, 99.95 (Cu+Ag), Annealed
SAE ARP5448/4 Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners
SAE AIR5464 Metal Clad Fibers for Electrical Shielding & Harness Overbraid
SAE AIR5113 Legal Issues Associated With the Use of Probabilistic Design Methods
SAE AS3563 Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Extended Wrench Pad 160 Ksi, 800 Mdf, Uns S66286
SAE AS3486 Nut, Self-Locking, Extended Double Hexagon, Reduced Flange, Dry Film Lube, Uns S66286, Class: 160 Ksi/800 Md
SAE AS3564 Nut, Self-Locking, Double Hexagon, Solid Film Lubricated, Counterbored 160 Ksi, 800 Mdf, Uns S66286
SAE AMS4991 Titanium Alloy Castings, Investment 6al 4v Hot Isostatic Pressed, Anneal Optional
SAE AMS4975 Titanium Alloy, Bars, Wire and Rings, 6.0al 2.0sn 4.0zr 2.0mo 0.08si, Solution and Precipitation Heat Treate
SAE AS85049/104 Connectors, Accessories, Composite, RFI/EMI, Electrical, Strain Relief, 45掳, Self-Locking, Category 3C (
SAE AS85049/105 Connectors, Accessories, Composite, RFI/EMI, Electrical, Strain Relief, 90掳, Self-Locking, Category 3C (
SAE ARP711 Illuminated Signs
SAE AIR5271 A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms
SAE AS3240 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-20 UNJF-3
SAE AS3238 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-24 UNJF-3
SAE AS3239 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-24 UNJF-3
SAE AS3236 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-32 UNJF-3
SAE AS3237 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-28 UNJF-3
SAE AS3243 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-
SAE AS3247 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-
SAE AS3248 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-
SAE AS3249 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-
SAE AS3245 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-
SAE AS3246 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-
SAE AS3244 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-
SAE AS3241 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-20 UNJF-3
SAE AS3242 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-18 UNJF-3
SAE AS3253 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3250 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3252 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3251 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS27641 Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty
SAE AS27647 Bearing, Ball, Airframe, Anti-Friction, Extra Wide, Double Row, Intermediate Duty
SAE AS7117 National Aerospace and Defense Contractors Accreditation Program Requirements for Shot Peening, Peen Forming
SAE AS27649 Bearing, Ball, Airframe, Antifriction, Intermediate Duty
SAE AS27648 Bearing, Ball, Airframe, Anti-Friction, External Self Aligning Extra Light Duty
SAE AS27646 Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty
SAE AS27644 Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty
SAE AS27643 Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty
SAE AS27642 Bearing, Ball, Airframe, Extra Light Duty
SAE AS21428 Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Precision
SAE AIR5575 Hot Stamp Wire Marking Concerns for Aerospace Vehicle Applications
SAE AMS2416 Plating, Nickel-Cadmium Diffused
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS2400 Plating, Cadmium
SAE AMS2451/4 Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
SAE AIR5487 Aircraft Tire History
SAE AS5385 Cargo Restraint Straps - Design Criteria and Testing Methods
SAE AS9582 Washer, Key - 270 Deg. Locking, Cres, UNS S32100
SAE AS9581 Washer, Key - 90 Deg. Locking, Cres, UNS S32100
SAE AS9276 Washer, Key - 180 Deg. Locking, Cres, UNS S32100
SAE AS3256 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3255 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3254 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS1860 Nut, Sleeve Coupling, Tube Reducer, Flareless (Cancelled Jul 2002)
SAE AS1861 Nut, Sleeve Coupling, Tube Reducer, Flared (Cancelled Jul 2002)
SAE AS1859 Fitting End, Non-Reversible, Straight Thread, Boss Connection (Cancelled Jul 2002)
SAE AS1858 Fitting End, Non-Reversible, Flared Tube Connection, Oversize Thread (Cancelled Jul 2002)
SAE AS1857 Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread (Cancelled Jul 2002)
SAE AS1856 Installation, Non-Reversible Fitting End (Cancelled Jul 2002)
SAE ARP4404 Aircraft Electrical Installations
SAE AMS2303 Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Pr
SAE AS9133 Qualification Procedure for Aerospace Standard Parts
SAE AMS2422 Plating, Gold
SAE AMS2436 Coating, Aluminum Oxide, Detonation Deposition
SAE ARP5319 Impregnation of Dry Fabric and Ply Lay-Up
SAE AMS4965 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0al 4.0v Solution Heat Treated and Aged
SAE AMS2268 Chemical Check Analysis Limits Cast Nickel And Nickel Alloys (Cancelled Jul 2002)
SAE MAM7211 Cotter Pins, Metric, Steel, Corrosion and Heat Resistant 18cr 10.5ni 0.40ti (Cancelled Jul 2002)
SAE AS509 Terminology Guide For Aircraft Gas Turbine Engines (Cancelled Jul 2002)
SAE AS395 Turn And Slip Indicators (Turn And Bank) (Cancelled Jul 2002)
SAE AS33 Nuts, Plain Hexagon - Aircraft Engine (Cancelled Jul 2002)
SAE AS1520 Areas For Calculating Stress Or Load Values For Metric Mjexternally Threaded Fasteners (Cancelled Jul 2002)
SAE ARP788 Procedure For The Determination Of The Silting Index Of A Fluid (Cancelled Jul 2002)
SAE ARP550 Accessory Envelope Type Xii For 6 1/2 Nominal Diametergenerators (Cancelled Jul 2002)
SAE ARP552 Accessory Envelope Type Xvi For 11Nominal Diameter Generatorsac Or Dc 15 To 60 Kva (Type I And Ii) (Cancelled
SAE ARP551 Accessory Envelope For 8Nominal Diameter Generators (Cancelled Jul 2002)
SAE ARP553 Accessory Envelope Type Xvi For 11Nominal Diameter Generatorsac Or Dc Above 60 Kva (Type I And Ii) (Cancelled
SAE ARP296 Terminal, High Altitude, Socket Contact (Cancelled Jul 2002)
SAE AMSTST2663 Filler Metal, Silver, Brazing 56ag - 22cu - 17zn - 5sn - 1152 -1203 F (622 - 651 C) Solidus-Liquidus (Can
SAE AMSS8559 Steel Bars, Carbon Aisi (1095), Aircraft Quality
SAE AMSQQS700 Steel, Sheet and Strip, Medium and High Carbon
SAE AMS7898 Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought (Cancelled Jul 2002)
SAE AMS7460 Bolts And Screws, Titanium Alloy 6al-4v Heat Treated, Rollthreaed (Uns R56400) (Cancelled Jul 2002)
SAE AMS7468 Bolts And Screws, Corrosion-Resistant Work-Strengthened Alloyforged Head, Roll Threaded After Aging (Cancell
SAE AMS7456 Studs, Low-Alloy Steel Heat Treated, Rolled Threaded (Uns G87400) (Cancelled Jul 2002)
SAE AMS7283 Gaskets, Type Xx Engine Accessory Drive Corrosion Resistant Steelscreen Reinforced Controlled Perfor (Cancel
SAE AMS7228 Rivets, Steel, Corrosion Resistant 18cr - 9ni Solution Heattreated Procurement Specification For (Cancelled
SAE AMS7222 Rivets, Aluminum Alloy 2.5cu - 0.35mg (2117-T4) (Cancelled Jul 2002)
SAE AMS7251 Nuts, Self-Locking, Corrosion And Heat Resistant Steel Highstrength, All Metal 1200 F (650 C) Use, U (Cancel
SAE AMS7253 Nuts, Self-Locking, Corrosion And Heat Resistant Alloy Highstrength, All Metal 1400 F (760 C) Use, U (Cancel
SAE AMS7252 Nuts, Self-Locking, Steel High Strength, All Metal 450 F (230 C)Use, UnifiedJ(Mil-S-8879) Thread For (Cancel
SAE AMS7212 * (Cancelled Jul 2002)
SAE AMS6510 * (Cancelled Jul 2002)
SAE AMS6480 * (Cancelled Jul 2002)
SAE AMS6262 Steel Bars, Forgings, And Tubing, 1.2cr 3.25ni 0.12mo(0.07 0.13c), Vacuum Consumable Electrode Remel (Cancel
SAE AMS5658 Steel Bars, Forgings, And Rings Corrosion Resistnt 15cr-4.5ni-.30 (Cb+Ta)-3.5cu (Cancelled Jul 2002)
SAE AMS5025 * (Cancelled Jul 2002)
SAE AMS4996 Billets and Preforms, 6al 4v, Premium Quality, Powder-Metallurgy Product (Cancelled Jul 2002)
SAE AMS4968 * (Cancelled Jul 2002)
SAE AMS4977 Titanium Alloy Bars 11.5mo - 6.0zr - 4.5sn 1275 - 1350 F(690 - 730 C) Solution Heat Treated (Cancelled Jul 2
SAE AMS4974 Titanium Alloy, Bars and Forgings, 11sn 5.0zr 2.3al 1.0mo 0.21si, Solution and Precipitation Heat Treated (C
SAE AMS4950 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0al 4.0v Solution Heat Treated and Aged Modified Strength
SAE AMS4936 Titanium Alloy, Extrusions and Flash Welded Rings, 6al 6v 2sn, Beta Extruded Plus Annealed, Heat Treatable (
SAE AMS4923 * (Cancelled Jul 2002)
SAE AMS4370 Cancelled
SAE AMS4380 Cancelled
SAE AMS4188 Aluminum Alloy Welding Wire (Cancelled Jul 2002)
SAE AMS4234 * (Cancelled Jul 2002)
SAE AMS4151 * (Cancelled Jul 2002)
SAE AMS4032 * (Cancelled Jul 2002)
SAE AMS4030 * (Cancelled Jul 2002)
SAE AMS3726/2 Shims, Filled Resin Compound Precatalyzed Sheet (Cancelled Jul 2002)
SAE AMS3565 Vulcanized Fibre (Cancelled Jul 2002)
SAE AMS3535 Barrier Material, Water Vapor Resistant, Flexible, Opaque (Cancelled Jul 2002)
SAE AMS3082 Cancelled
SAE AMS1731 Urea Compound, Powder (Cancelled Jul 2002)
SAE AMS1730 Urea Compound, Shotted (Cancelled Jul 2002)
SAE AMS1432 Fluid Deicing/Anti-Icing Runways And Taxiways Potassiumacetate Base (Cancelled Jul 2002)
SAE AS33201 Circuit Breaker-Aircraft, Trip-Free, Push Pull, 1/2 Thru 20 Amps, Type 1 -55 Thru +121掳C
SAE AMS6487 Steel, Bars, and Forgings, 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11), Consumable Electrode Vacuum Melted
SAE AMS4048 Aluminum Alloy Sheet and Plate, Alclad 5.6zn 2.5mg 1.6cu 0.23cr (Alclad 7075-0) Annealed
SAE MS1009 Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification
SAE AMS4080 Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed
SAE AS5356 Coupling, Fuel Line, Flexible, 125 psi General Specification For
SAE AMS7897 Tungsten Forgings, Pressed, Sintered, and Forged (Cancelled Jul 2002)
SAE AMS6525 Steel, Bars, Forgings, Tubing, and Rings, 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C), Consumable
SAE AMS4932 Titanium Alloy Sheet 6al 4v Driver Sheet
SAE AMS4241 Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), Solution and Precipitation Heat Treat
SAE ARP5143 Vacuum Bagging of Thermosetting Composite Repairs
SAE AMS5647 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing and Rings, 19Cr - 9.5Ni, Solution Heat Treated
SAE AMS4027 Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate), Solution a
SAE AMS2374 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloy Forgings
SAE AMS4901 Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70 Ksi (485 Mpa)
SAE AMS5639 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 19Cr - 10Ni, Solution Heat Treated
SAE AMS6257 Steel Bars, Forgings, and Tubing 1.6si 0.82cr 1.8ni 0.40mo 0.08v (0.40-0.44c) Consumable Electrode Vacuum Re
SAE AMS3277 Sealing Compound, Polythioether Rubber Fuel Resistant, Fast Curing Intermittent Use to 360Mdf (182Mdc)
SAE AMST9046 Titanium and Titanium Alloy, Sheet, Strip, and Plate
SAE ARP5448/7 Plain Bearing Wear Measurement
SAE AS8584 Brake Systems, Wheel, Aircraft, Design of
SAE ARP5448/3 Plain Bearing Low Speed Oscillation Test
SAE ARD50093 Unresolved Issues in Training Pilots for Closely-Spaced Parallel Runways and Precision Runway Monitor Oper
SAE AMS5653 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 17Cr - 12Ni - 2.5Mo (0.030 Max
SAE AMS4161 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), Solution Heat Treated and Naturally
SAE AMS2231 Tolerances, Carbon Steel Bars
SAE AMS3265 Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting for Intermittent
SAE AS8181 Detector, Ice, Air Intake Duct, Aircraft Engines and Airframe Systems, General Specification For (Cancelled A
SAE AS6625 Spray Equipment, Aircraft Windshield, Anti-Icing (Cancelled Aug 2002)
SAE AIR1176 Oxygen System and Component Cleaning and Packaging (Cancelled Aug 2002)
SAE AS393 Airspeed Tubes Electrically Heated (NONCURRENT Jul 2002)
SAE ARP4386 Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies
SAE AIR1678 Uncertainty of In-Flight Thrust Determination
SAE ARP5507 Aircraft Tire-to-Wheel Performance Characteristics
SAE AIR825/4 Chemical Oxygen Systems
SAE AIR825/11 Closed-Cycle Protective Breathing Devices
SAE AMS6265 Steel, Bars, Forgings, and Tubing 1.2cr 3.25ni 0.12mo (0.07 0.13c) (SAE 9310) Vacuum Consumable Electrode Re
SAE AMS6456 Steel, Welding Wire 0.80cr 1.8ni 0.25mo (0.35-0.40c) (SAE 4340mod) Vacuum Melted, Environment-Controlled Pac
SAE AMS6528 Steel, Bars, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), Special Aircraft Quality Cleanliness, Normalized
SAE MS1010 Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification
SAE AMS7496 Rings, Flash Welded, Carbon and Low-Alloy Steels
SAE AMS7310 Rings, Piston, Cast Iron, as Cast (NONCURRENT)
SAE AMS6529 Steel, Bars, 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140), Special Aircraft-Quality Cleanliness, Normalized
SAE AMS6453 Steel, Welding Wire, 0.30Cr - 1.8Ni - 0.40Mo - (0.23 - 0.28C), Vacuum Melted, Environment Controlled Packagi
SAE AMS6452 Steel, Welding Wire, 0.95Cr - 0.20Mo (0.38 - 0.43C), Vacuum Melted, Environment Controlled Packaging
SAE AMS6479 Steel, Bars, Forgings, and Tubing 1.45cr (0.98 - 1.10c) (SAE 52100) Special Aircraft-Quality Cleanliness
SAE AMS6462 Steel, Welding Wire, 0.95Cr - 0.20V (0.28-0.33C) (SAE 6130)
SAE AMS6428 Steel, Bars, Forgings, and Tubing 0.80cr 1.8ni 0.35mo 0.20v (0.32-0.38c) (4335 Modified)
SAE AMS6323 Steel, Mechanical Tubing, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)
SAE AMS5027 Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C), Vacuum Melted, Environment-Controlled P
SAE AMS4982 Titanium Alloy Wire 44.5cb
SAE AMS4920 Titanium Alloy, Forgings 6al 4v Alpha-Beta Or Beta Processed, Annealed
SAE AMS5648 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo, Solution
SAE AMS5515 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 18Cr - 8.5Ni (302), Solution Heat Treated, High Ductili
SAE AMS5786 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5ni 5.0cr 24.5mo 5.5fe
SAE AMS4115 Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings, Annealed, 1.0Mg - 0.60Si
SAE AMS5557 Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr - 10.5Ni - 0.40Ti (SAE 3032
SAE AMS5873 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65ni 15.8cr 15.2mo 0.30al 0.05la Consuma
SAE AMS5706 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57ni 19.5cr 13.5co 4.3mo 3.0ti 1.4al 0
SAE AMS5563 Steel, Corrosion Resistant, Seamless or Welded Tubing, 19Cr - 9.5Ni (SAE 30304), Cold Drawn, 1/4 Hard Temper
SAE AMS5776 Steel, Corrosion and Heat-Resistant, Welding Wire 12.5cr (SAE 51410)
SAE AMS5567 Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (SAE 30304), Solution Heat Trea
SAE AMS5899 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C), Powder Metallurgy Produc
SAE AMS5782 Steel, Corrosion and Heat-Resistant, Welding Wire, 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti, Vacuum I
SAE AMS5755 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Soluti
SAE AMS5754 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5ni 22cr 1.5co 9mo 0.60w 18.5fe Sol
SAE AMS5660 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5cr 42.5ni 6.0mo 2.7ti 0.015b 34fe Con
SAE AMS5409 Castings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta 3.4al 0.010b 0.06zr (0.03-0.08c), V
SAE AMS4324 Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat
SAE AMS4179 Aluminum Alloy Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452), Solution Heat Treated, Stress Relieved
SAE AMS4079 Aluminum Alloy, Drawn, Round, Seamless, Tubing, 1.0Mg - 0.06Si - 0.28Cu - 0.20Cr (6061-O), Close Tolerance,
SAE AMS4044 Aluminum Alloy, Sheet and Plate 5.6zn 2.5mg 1.6cu 0.23cr (7075-0) Annealed
SAE AMS4001 Aluminum Sheet and Plate 0.12cu (1100-0) Annealed
SAE AMS3603 Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications
SAE AMS2685 Welding, Tungsten Arc, Inert Gas (Gtaw Method)
SAE AMS2281 Trace Element Control, Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, Hig
SAE AS85049/103 Connectors, Accessories, Composite, RFI/EMI, Electrical, Strain Relief, Straight, Self-Locking, Category
SAE AMS5376 Alloy, Corrosion and Heat Resistant, Investment Castings, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb -
SAE AS9724 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Stee
SAE AMS4120 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat T
SAE AMS6484 Steel, Bars, Forgings, and Tubing 0.80cr 1.8ni 0.25mo (0.38 - 0.43c) SAE 4340 Normalized and Tempered
SAE AMS6260 Steel, Bars, Forgings, and Tubing 1.2cr 3.2ni 0.12mo (0.07 0.13c) (SAE 9310)
SAE AMS6305 Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted
SAE AMS4116 Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Solution He
SAE AMSS8949 Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6ac (Noncurrent Sep 2002) (Cancelled Sep 20
SAE AMST8506 Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded (NONCURRENT Sep 2002)
SAE AMSSTD2219 Fusion Welding for Aerospace Applications (Cancelled Sep 2002, Superseded by AWS D17.1)
SAE AMSS7947 Steel, Sheet and Strip (1095) (Aircraft Quality) Noncurrent Sept 2002
SAE AMSS8503 Steel Bars, Chrome-Vanadium (6150), Aircraft Quality (Cancelled Sep 2002)
SAE AMSS7952 Steel, Sheet and Strip, Uncoated, Carbon (1020 and 1025) (Aircraft Quality) (Cancelled Sep 2002)
SAE AMSS6709 Steel, Chrome-Molybdenum-Aluminum; Bars, Rods, Billets and Forging Stock (For Nitriding) (Aircraft Quality
SAE AMSSTD1595 Qualification of Aircraft, Missile and Aerospace Fusion Welders (Cancelled Sep 2002, Superseded by AWS D1
SAE AMSS8840 Steel Sheet and Strip, Corrosion-Resistant, Precipitation Hardening (Am350 and Am355), Premium Quality (Ca
SAE AMSS8690 Steel, Chrome-Nickel-Molybdenum, 8620, Bars Aircraft Quality (Cancelled Sep 2002)
SAE AMSS6049 Steel, Chrome-Nickel-Molybdenum (8740) Bars and Reforging Stock (Aircraft Quality) (Noncurrent Sep 2002) (
SAE AMSS18728 Steel Plate, Sheet and Strip, Alloy 8630, Aircraft Quality (Noncurrent Sep 2002) (Cancelled Sep 2002)
SAE AMS7718 Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings, 50Ni - 50Fe
SAE AMS5705 Steel, Corrosion and Heat Resistant, Bars and Forgings 2.5si 12.5si 8.0ni Annealed (Cancelled Sep 2002)
SAE AMS4149 Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation
SAE AMS2426 Coating, Cadmium Vacuum Deposition
SAE ARP1917 Clarification of Terms Used in Aerospace Metals Specifications
SAE AS24585 Spring, Helical, Compression: for Loads Below 20 Pounds
SAE AS27645 Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty
SAE AS9390 Pin, Straight, Headless, Dowel - Cres, UNS S66286, Standard and Oversize
SAE AS9361 Nut, Plain, Hexagon, Check, UNS S66286, 130 ksi min
SAE AS9357 Nut, Plain, Hexagon, Silver Plated, UNS S66286 130 ksi min
SAE AS1036 Fitting, Cross, Standard and Reducer, Flared
SAE ARP1281 Actuators: Aircraft Flight Controls, Power Operated, Hydraulic, General Specification For
SAE AIR1666 Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Syste
SAE AS9558 Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi
SAE AS9556 Bolt, Machine-Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Mi
SAE AS9559 Bolt, Machine-Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi
SAE ARP1782 Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays
SAE AIR1957 Heat Sinks for Airborne Vehicles
SAE AS5990 Fitting Assembly, Elbox, 90掳 Beam Seal to Welded Fitting with Retained Nut
SAE AIR5504 Aircraft Inflight Icing Terminology
SAE ARP922 Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas
SAE AS5488 Regional Aircraft Towbar Attach Fitting Interface
SAE ARP695 Galley System Design and Installation Criteria
SAE AS27640 Bearing, Ball, Airframe, Anti-Friction, Heavy Duty
SAE ARP5577 Aircraft Lightning Direct Effects Certification
SAE ARP5597 General Inspection of ULDs
SAE AIR825/9 Demand Oxygen Systems
SAE AIR1667 Rotor Blade Electrothermal Ice Protection Design Considerations
SAE AS90335 Connector, Receptacles, Plugs, Adaptor, El, Embedded, Printed Circuit Board Lamp Lighting Panels
SAE ARP5904 Airborne Icing Tankers
SAE ARP4102/11 Airborne Windshear Systems
SAE AMS4987 Titanium Alloy, Forgings 10v 2fe 3al, Consumable Electrode Melted, Single Solution Heat Treated and Overaged
SAE AMS4983 Titanium Alloy, Forgings 10v-2fe-3al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged
SAE AIR825/8 Continuous Flow Oxygen Systems
SAE AIR4567 Military Composite Electrical Connectors
SAE AMS4952 Titanium Alloy, Welding Wire, 6al 2sn 4zr 2mo
SAE AMS2473 Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
SAE AMS2438 Plating, Chromium Thin, Hard, Dense Deposit
SAE AMS2485 Coating, Black Oxide
SAE AMS4971 Titanium Alloy, Bars, Wire, Forgings, and Rings 6a1 6v 2sn Annealed, Heat Treatable
SAE AMS3065 Compound, Corrosion Preventive, Thin Film, Fingerprint Removing
SAE AMS6459 Steel, Welding Wire, 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C), Vacuum Melted
SAE AMS6308 Steel, Bars and Forgings 0.90si 1.0cr 2.0ni 3.2mo 2.0cu 0.10v (0.07-0.13c) Vacuum Arc Or Electroslag Remelte
SAE AMS5334 Steel, Investment Castings 0.50cr 0.55ni 0.20mo (0.25-0.35c) (SAE 8630 Mod) Normalized and Tempered
SAE AMS5333 Steel, Investment Castings 0.50cr 0.55ni 0.25mo (0.11-0.17c) (SAE 8615) Normalized
SAE AMS4992 Castings, Structural Investment, Titanium Alloy 6al 4v Hot Isostatically Pressed
NF E03-004-3-2005 用螺纹密封的管螺纹.第3部分:用极限量规检验
NF E25-037-2005 紧固件.紧固性能.扭矩/角度简易试验方法
NF E29-904-2005 法兰及其连接件.符合EN 1514和EN 12560系列标准的垫圈的质量保证检验和试验
NF P43-014-2005 防饮用水回流污染的装置.带恒定大气压力孔的管阻流器DN10至DN 20. C型D系列
NF E51-752-2005 建筑物通风.冷却梁.无源冷却梁的检验和额定值
NF P43-013-2005 防饮用水回流污染的装置.直通反真空阀DN 8至DN 80. A型D系列
NF E25-801-1-2005 预加负荷用高强度结构螺栓组件.第1部分:一般要求
NF E03-150-2005 ISO一般用途米制螺纹.量规和量规检验
NF E29-201-1-2005 法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.第1部分:NPS 1/2到24 钢法兰
NF H50-510-3-2005 篮式手推车.第3部分:有或无儿童乘坐设备的带附加载货设施的篮式手推车的要求和试验
NF T47-290-5-2005 带夹件的软管配件.第5部分:螺纹连接
NF C93-464-3-101-2005 电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-101部分:插箱及其插件
NF M88-731/A1-2005 液化石油气罐阀和配件的规范和试验
NF T47-011-2005 织物输送带.循环式(拼接)输送带的净长度测定
NF H96-301-2-2005 自行式乘坐控制工业用货车的踏板结构和布局.踏板结构和布局的原则
NF E25-801-2-2005 预加负荷用高强度结构螺栓组件.第2部分:预加载适用性试验
NF E22-327-2005 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准
NF E25-036-2005 紧固件.扭矩/夹持力试验
NF H96-002-2005 机动工业车辆.术语
NF T47-290-2-2005 带夹件的软管配件.第2部分:软管末端的侧面部件
NF T47-290-8-2005 带夹件的软管配件.第8部分:系统半耦合件(基利明系统)
NF M88-738-2005 LPG罐用减压阀.辅助设备
NF E29-696-2005 可移动储气瓶.防爆板压力释放装置(不含乙炔储气瓶)
NF E25-012-2005 头部外形符合ISO 7721的沉头螺钉用沉头
NF E29-902-8-2005 法兰及其连接件.PN标示法兰用垫圈的尺寸.第8部分:带槽法兰用聚酯O形密封圈
NF T47-290-1-2005 带夹件的软管配件.第1部分:要求、测量、标识和检验
NF T47-290-6-2005 带夹件的软管配件.第6部分:TW槽罐车耦合件
NF A48-881-2005 不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥
NF E86-401-2-2005 工厂制造的钢罐.第2部分:易燃和不易燃水污染液体的地上储存用卧式圆柱形单层和双层钢罐
NF E90-372-2005 机器的工况监测和诊断.词汇
NF T47-290-7-2005 带夹件的软管配件.第7部分:凸轮锁紧耦合件
NF E29-903-2005 法兰及其连接件.与有垫圈圆形法兰连接件的设计规则有关的垫圈参数和试验方法
NF E90-656-1-2005 机器的工况监测和诊断.预测.第1部分:一般指南
NF C93-464-3-103-2005 电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-103部分:键控和定位销
NF P43-027-2005 防污止回阀.包括DN 6至DN 250.E系列A、B、C、D型
NF E52-061-2-2005 起重机.海上起重机.第2部分:浮动式起重机
NF E52-600-2005 建筑用升降机.术语
NF T47-290-4-2005 带夹件的软管配件.第4部分:法兰连接
NF T47-290-3-2005 带夹件的软管配件.第3部分:螺栓连接或带销的夹件
NF E29-475-2005 石油、石化和相关工业用金属球阀
NF H50-501-3-2005 滚动集装箱.第3部分:试验方法
NF E86-601-5-2005 检漏系统.第5部分:液面计检漏系统
NF T47-820-6-2005 结构轴承.第6部分:摇杆轴承
NF E04-552-2005 产品几何量技术规范(GPS).几何公差.形状、方位、位置和跳动公差
NF E29-372/A1-2005 工业阀门.铸铁止回阀
NF E04-521-1-2005 技术制图.尺寸和公差的表示.第1部分:一般原则
NF E51-729-5-2005 建筑物通风.住宅通风用部件/产品的性能检验.通风帽和屋顶出口终端装置
NF H90-008-2005 系列1集装箱.技术要求与试验.第3部分:液体、气体及加压干散货用罐式集装箱
NF L91-131-1-2005 航空货运设备.紧固带.第1部分:设计准则和试验方法
NF E48-071-2005 液压传动.符合NF ISO 6162-1和-2的法兰用法兰头
NF E48-072-2005 液压传动.符合NF ISO 6164的法兰用法兰头
NF H00-106-2005 包装.危险货品运输包装.再生塑料材料
NF H34-012-2005 包装.非危险货物用软的过渡性散货集装箱(FIBCs)
NF E86-501-3/A1-2005 低温容器.大型可运输非真空绝缘容器.第3部分:操作要求
NF X35-400-6-2005 控制中心的人体工效学设计.第6部分:控制中心的环境要求
NF C93-346-2005 电子和电信设备用固定电感器.标记代码
NF H00-111-2005 危险物质包装.固体产品用可再密封的包装.试验方法
NF C20-780-2005 环境试验.第2-80部分:试验.试验Fi:振动.混合模式试验
NF C20-710-2005 环境试验.第2-10部分:试验.试验J和指南:长霉
NF A91-321-2005 金属和非金属基材的非磁性金属覆层.覆层厚度测量.相敏涡流法
NF E86-503-3/A1-2005 低温容器.固定非真空绝缘容器.第3部分:操作要求
NF E86-502-3/A1-2005 低温容器.大型运输真空绝缘容器.第3部分:操作要求
NF H60-149-2005 包装.在实验室试验中模拟堆肥条件下初步评价包装材料的分解
NF X50-077-2005 合格评定机构和认可机构同等评定的一般要求
NF H34-092-2005 包装.塑料冷冻袋.规范和试验方法
NF M60-512-4-2005 校准剂量仪和剂量率仪及确定其光子能量响应的Χ和γ参考辐射.第4部分:低能X参考辐射场中场所剂量计和个人剂量计的校准
NF E86-504-3/A1-2005 低温容器.静压真空绝热容器.第3部分:操作要求
NF A91-227-2005 热喷涂.热喷涂熔敷系数的测定
NF E35-413/A1-2005 制冷系统和热力泵.减压装置和与其相关的管件.计算方法
NF C20-924-6-1-2005 着火危险试验.第6-1部分:烟雾遮蔽性.一般指南
NF A91-200-2005 热喷涂.术语、分类
NF E48-427-2005 液压传动.压力开关.安装表面
NF S31-077-2005 声学.空气声和冲击声隔绝及辅助设备声音的现场测量.测量法
NF A06-383-2005 测定锌基和铝基金属覆层的厚度和化学成分.常规法
NF X50-130-2005 质量管理体系.基础和词汇
NF A05-663-2005 复杂构造的阴极保护
NF C55-408-2005 液压涡轮机.控制系统测试
NF C93-704-2005 环境和耐用试验.区域阵列式包装件表面安装板的试验方法FBGA、BGA、FLGA、LGA、SON和QFN
NF S31-001-5-2005 电声学.听力测定设备.第5部分:听觉声阻抗/导纳测量用设备
NF X08-014-2005 颜色.比色法.假统一的颜色空间:CIELAB和CIELUV.与色差相关的公式
NF A91-228-2005 热喷涂.热喷涂建议
NF H11-013-2005 包装.袋.已填充袋摩擦系数的测定
NF E49-052-2005 气压传动.连接.气口和螺柱端
NF T35-502-8-2005 涂装油漆和有关产品前钢材的预处理.表面清洁度评定试验.第8部分:水分折射测定的现场方法
NF E35-422-2005 移动式检漏器和卤化制冷剂室内控制器的性能
NF E49-007-2005 气压传动.气缸.1000 kPa (10 bar) 系列、缸径从 20 mm 到 100 mm的小型缸
NF T35-503-5-2005 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
NF S31-066-2-2005 声学.从接近耳朵的声源处测定声辐射强度.第2部分:利用人体模型技术
NF H35-113-10-2005 玻璃容器.真空凸缘瓶口.第10部分:普通规格77
NF H35-113-8-2005 玻璃容器.真空凸缘瓶口.第8部分:普通规格63、66和70
NF X50-074-1-2005 合格评定.供应商的合格声明.第1部分:一般要求
NF T35-502-5-2005 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
NF T35-508-9-2005 涂装油漆和有关产品前钢材预处理.非金属喷射清理磨料规范.第9部分:十字石
NF C97-336-2005 测量传声器.第6部分:频率响应的测定用静电致动器
NF X50-074-2-2005 合格评定.供应商的合格声明.第2部分:配套文献
NF H35-113-11-2005 玻璃容器.真空凸缘瓶口.第11部分:普通规格82
NF T35-502-12-2005 涂装油漆和有关产品前钢材预处理.表面清洁度评定试验.第12部分:水溶铁离子滴定测定的现场方法
NF E49-053-2005 气压传动.最高工作压力为10 bar、16 bar和25 bar(1 MPa、1.6 MPa和2.5 MPa)圆柱形快速接头.插头连接尺寸、规范、应用指南和试验
NF S31-169-2005 声学.用声屏蔽法控制办公室和工作场所噪音的指南
NF X50-150-2-2005 数值管理、数值分析、函数分析词汇.第2部分:数值管理
NF H35-113-9-2005 玻璃容器.真空凸缘瓶口.第9部分:深度为63、66和70
NF E48-383-2005 液压传动.发动机特性的测定.第3部分:在恒流量和恒转矩下测定
NF H35-113-1-2005 玻璃容器.真空凸缘瓶口.第1部分:总则
NF X35-008-2005 工业产品和设计的人体测量方面的检测人员的选择和使用原则
NF X08-020-2005 图形符号.安全色和安全标志.第2部分:产品安全标签的设计原理
NF H35-113-6-2005 玻璃容器.真空凸缘瓶口.第6部分:普通规格53和58
NF A91-201-2005 热喷镀.金属涂层和其他无机覆层.锌、铝及其合金
NF H35-113-13-2005 玻璃容器.真空凸缘瓶口.第13部分:普通规格100
NF H35-113-12-2005 玻璃容器.真空凸缘瓶口.第12部分:普通规格89
NF T35-502-10-2005 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第10部分:水溶性氯化物滴定测定的现场方法
NF T35-508-10-2005 涂装油漆和有关产品前钢材预处理.非金属喷射清理磨料规范.第10部分:铁铅石榴石
NF A91-127-2005 非金属基底材料金属涂层.涂层厚度测量.微电阻率法
NF T37-001-20-2005 盘绕涂覆金属.试验方法.第20部分:泡沫材料粘结性
NF T37-001-24-2005 盘绕涂覆金属.试验方法.第24部分:抗屏蔽和压力标记
NF M88-137-2005 危险物品运输罐.罐的辅助设备.应急减压阀
NF X50-087-2005 合格评定.词汇和一般原则
NF T37-001-16-2005 盘绕涂覆金属.试验方法.第16部分:耐磨性
NF H35-113-7-2005 玻璃容器.真空凸缘瓶口.第7部分:深度为58
NF X35-205-2005 热环境的人类工效学.代谢率的测定
NF H00-105-2005 包装.危险货物的运输包装.塑料兼容性试验
NF X50-064-2005 各类检查机构运行的一般准则
NF H00-201-2005 防儿童拆开的包装.可再次包装的要求和试验程序
NF T37-001-17-2005 卷材涂覆金属.试验方法.第17部分:可剥离薄膜的粘结性
NF P16-451-1/A1-2005 轻质液体(例如:油和石油)分离器系统.第1部分:产品设计、性能和试验、标记和质量控制的原则
NF H35-003-2005 玻璃容器.用重量法测定容量.试验方法
NF H35-113-5-2005 玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48
NF R14-706-2005 道路车辆.交通信息和控制设备的人类工效学方面.车辆中声音信号表示规范和性能规程
NF A91-270-2005 机械镀锌涂层.规范和试验方法
NF A91-230-2005 热喷涂.热喷涂层.图纸上的符号表示
NF C20-758-2005 环境试验.第2-58部分:试验.试验Td.表面安装元器件(SMD)用可焊性、耐金属化溶融和耐焊接热试验方法
NF A91-213-2005 热喷涂.粉末.成分、供货技术条件
NF X35-204-2005 热环境的人类工效学.通过计算预测的热应变对热应力的分析测定和说明
NF T37-001-12-2005 卷材涂覆金属.试验方法.第12部分:耐划痕
NF T90-251-2005 水质.选定的有机化合物的测定.气相色谱法
NF M60-321-2005 核能.核燃料循环技术.核废料.通过计量外壳泄露的氦-3测定包装含氚核废料的氚放射性非侵入性和非破坏性
NF M60-322-2005 核能.核燃料循环技术.废弃物.优先化学分离后用液体闪烁法测定污水和废弃物中铁55的放射性
NF M60-324-2005 核能.核燃料循环技术.同类废物浸出阻力的测定
NF M60-805-4-2005 核能.环境放射性测量.水.第4部分:水中用感应耦合等离子体质谱探测法测量铀
NF M60-805-5-2005 核能.环境放射性测量.水.第5部分:水中根据α光谱测定法测量铀的放射性和浓度
NF S31-704-2-3/A1-2005 家用和类似用途电器.测定空中传播噪声的试验规程.第2-3部分:洗碗机的特殊要求
NF M60-790-1-2005 环境中放射性的测量.土壤.第1部分:一般指南和定义
NF T90-186-2005 水质.用气相色谱法/质谱法测定被选邻苯二甲酸酯
NF X43-029-3-2005 环境空气质量.测量苯浓度的标准方法.第4部分:用现场气相色谱法的自动泵送取样
NF X43-265-3-2005 工作场所空气.感应耦合等离子体原子发射光谱法测定气载颗粒物中金属及类金属.第3部分:分析
NF X33-024-2005 淤泥的特性描述.磷总含量的测定
NF X30-424-2005 废弃物.通过在一个钻孔上的恒负载渗透试验来测定地面的渗透系数
NF M60-325-2005 核能.核燃料循环技术.用液体闪烁法对废料中氚的活性的测定
NF X43-026-2005 环境空气质量.悬浮颗粒物质的PM10成分中Pb、Cd、As和Ni测量的标准方法
NF X43-029-5-2005 环境空气质量.测量苯浓度的标准方法.第5部分:溶剂吸附和气体色谱法后的扩散取样
NF X43-029-2-2005 环境空气质量.测量苯浓度的标准方法.第2部分:溶剂吸附和气相色谱法后泵送取样
NF T90-366-2005 水质.使用多网眼刺网对鱼进行取样
NF X43-029-1-2005 环境空气质量.测量苯浓度的标准方法.第1部分:热解吸附作用气相色谱法后的泵送取样
NF X43-029-4-2005 环境空气质量.测量苯浓度的标准方法.第4部分:热解吸附作用和气相色谱法后的扩散取样
NF S31-110-2005 声学.环境噪音的描述和测量.基本量和一般评价方法
NF M60-805-3-2005 核能.环境中放射性的测量.水.第3部分:用α液体闪烁法测定水中铀的浓度
NF T90-322-2005 水质.水介质中有机化合物最大需氧生物降解能力的评价.密封容器中无机碳的分析方法(CO2 顶空试验)
NF X31-421-2005 土质.一些选出的氯苯酚的测定.电子俘获检测的气相色谱法
NF T90-105-2005 水质.悬浮固体的测量.玻璃纤维过滤器的过滤方法
NF M60-220-2005 辐射防护.进行细胞遗传学生物剂量测定的工作实验室的性能标准
NF X31-008-5-2005 土壤质量.取样.第5部分:城市和工业场所土壤污染调查方法指南
NF X43-061-2005 环境空气质量.利用化学发光测量二氧化氮和一氧化氮浓度的标准方法
NF X30-465-2005 废弃物的表征.渗出性能试验.上流渗透试验(在特定条件下)
NF X43-062-2005 环境空气质量.利用紫外线荧光测量二氧化硫浓度的标准方法
NF X43-204-2005 工作场所空气.气载颗粒物质中六价铬的测定.用二苯基卡巴胼的离子色谱法和光谱测定法
NF X31-206-2005 土质.生物方法.高等植物的慢性毒性
NF X43-205-2005 工作场所空气.汞和无机汞化合物的测定.低温蒸气原子吸收分光光度测定法或原子荧光分光光度测定法
NF S31-049-1/A1-2005 声学.建筑物和建筑构件的隔声测量.第1部分:能抑制侧向传声的实验室试验装置的要求.修改件1: 轻型双叶隔板用开度测试框架的特殊要求
NF S31-049-3/A1-2005 声学.建筑物和建筑元件隔音测量.第3部分:建筑物元件气载噪声隔绝的试验室测量.修改件1: 轻型双叶隔板的安装指南
NF X31-436-2005 土质.连续分析用试样的冻干法预处理
NF X43-064-2005 环境空气质量.用紫外线光度测量法测量臭氧浓度的标准方法
NF C19-101-2005 辐射防护仪.中子环境剂量当量率计
NF X43-400-1-2005 固定源排放.气相和粒相多环芳香烃的测定.第1部分:取样
NF T90-164-2005 水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种元素的测定
NF M60-759-2005 核能.环境放射性的测量.空气.大气环境中碘容积活性的测定
NF T90-304-2005 水质.用单细胞绿藻类进行的淡水藻类生长抑制性试验
NF T90-461/A1-2005 水质.微生物学.培养基的质量控制
NF X31-515-2005 土质.表面密封和水腐蚀倾向性评定用土壤集料稳定性的测量
NF C19-103-5-2005 气态排出流放射性连续监视设备.第5部分:氚监视仪的特殊要求
NF C19-103-4-2005 气态排出流放射性连续监视设备.第4部分:碘监视仪的特殊要求
NF S31-704-2-11-2005 家用和类似用途电器.测定空中传播噪声的试验规范.第2-11部分:电动食品加工机的特殊要求
NF C19-103-3-2005 气态排出流放射性连续监视设备.第3部分:放射性惰性气体监视仪的特殊要求
NF S31-907-2005 废水装置噪声的实验室测量
NF X43-065-2005 环境空气质量.用非色散红外线光谱法测量一氧化碳浓度的标准方法
NF X43-404-6-2005 室内空气.第6部分:通过在泰纳克斯TA吸收剂上活性取样、热解吸和MS/FID气相色谱法测定室内和试验室空气中挥发性有机化合物的含量
NF C19-103-2-2005 气态排出流放射性连续监视设备.第2部分:包括铀后气溶胶的放射性气溶胶监视设备的特殊要求
NF C19-103-1-2005 气态排出流放射性连续监视设备.第1部分:一般要求
NF T90-514-2005 水质.抽样.第19部分:海底沉积物的抽样指南
NF T90-151-2005 水质.可吸附卤素(AOX)的测定
NF T90-023-2005 水质.磷的测定.钼酸铵光谱测定法
NF S31-704-2-10-2005 家用和类似用途电器.空中传播噪声测定的试验规范.第2-10部分:电炉灶、烤炉、炉架、微波炉和组合微波炉的特殊要求
NF X31-117-2005 土壤质量.pH值的测定
NF T90-083-1-2005 水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第1部分:流量注入分析法(FIA)
NF X43-291-2005 工作场所空气.容积式生物悬浮微粒取样装置.要求和试验方法
NF T90-391-2005 水质.IOBL的测定
NF T90-083-2-2005 水质.用流量分析(FIA和CFA)法测定正磷酸盐和含磷总量.第2部分:连续流量分析法(CFA)
NF X31-223-2005 土质.污染物对土壤植物群影响的测定.莴苣苗发出的筛选试验(Lactuca sativa L.)
NF T90-359-2005 水质.河水的水形态学特征评定的指导标准
NF C19-102-2005 辐射防护仪.β、X和γ辐射的环境和/或定向剂量当量(率)测量仪和(或)监测仪
NF X30-405-2005 废弃物表征.用气相色谱法测定C10至C40范围内的烃含量
NF S31-704-2-3-2005 家用和类似用途电器.空中传播噪声测定的试验规范.第2-3部分:洗碗机的特殊要求
NF C73-899-2005 家用和类似用途电器.安全.第2-99部分:商用电炉罩的特殊要求
NF G35-050-2005 铺地织物.用威特罗改进型转鼓试验测定切割边耐磨性
NF D61-003-2005 家具.坐椅.稳固性测定
NF G62-115-2005 鞋靴.鞋帮试验方法.耐磨损性
NF G62-103-2005 鞋类.鞋帮的试验方法.变形性
NF G62-111-2005 鞋类.鞋帮、鞋衬和内垫试验方法.耐摩擦色牢度
NF S54-001/A1-2005 儿童护理用品.轮式儿童车辆.安全要求和试验方法
NF S54-001/A2-2005 儿童护理用品.轮式儿童车辆.安全要求和试验方法
NF D65-005-2005 家具和厨房贮藏设备和橱柜台面.安全要求和试验方法
NF S52-329-1-2005 固定的训练器材.第1部分:一般安全要求和试验方法
NF S54-001/A3-2005 儿童护理用品.轮式儿童车辆.安全要求和试验方法
NF S11-427-2005 眼科光学.未切边的成品眼镜镜片.第5部分:眼镜镜片表面耐磨性的最低要求
NF P62-308-2005 弹性地板覆盖物.带有增强防滑粒子的聚氯乙烯地板覆盖物.规范
NF G07-185/A1-2005 纺织材料和纺织产品.燃烧性能..窗帘和帷幕.测定垂直定向试样易燃性(小火焰)详细程序
NF G37-216-2005 橡胶或塑料涂层织物.静摩擦和动摩擦系数的测定
NF G33-005-2005 纺织品.丝绒毛巾和丝绒织物.规范和试验方法
NF G62-113/A1-2005 鞋类.鞋帮的试验方法.耐水性
NF P90-144-2005 运动场地表面.散矿渣吸水性能的测定
NF P90-145-2005 运动场地表面.室外运动场散矿渣表面厚度的测定
NF S52-800-2005 野营帐篷
NF P90-146-2005 运动场地表面.室外运动场天然草皮和散矿渣表面硬度的测定
NF P90-147-2005 运动场地表面.室外运动场散矿渣表面的成分和颗粒形状的测定
NF G90-002-2005 工业缝纫机械.缝纫机械、设备和系统的安全要求
NF P90-148-2005 运动场地表面.室外运动场散矿渣表面含水量的测定
NF G36-015-2005 纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索
NF G36-011-2005 纤维绳索.聚乙烯.3和4股绳索
NF D21-621-1-2005 器皿的耐机洗性.第1部分:家用物品的参考试验方法
NF D21-351/A1-2005 炊具.家用压力锅
NF S52-329-10-2005 固定训练器材.第10部分:带固定轮或无活动轮的训练用自行车的附加特定安全要求和试验方法
NF G38-203-2005 土工合成物材料.测定聚合土工合成阻挡层抗环境应力断裂性能的试验方法
NF X50-817-1-2005 家具拆卸工作.家具的存储以及人为影响.第1部分:最小设施用规范以及相关存储规定
NF G38-108-2005 土工合成织物.测定土工织物及其相关制品的单位面积质量的试验方法
NF E73-521-1-2005 木工工具.安全性要求.第1部分:铣刀和圆锯片
NF V09-002-2005 感官分析.方法学.味觉灵敏度的测定方法
NF S52-910-2-2005 乒乓球.第2部分:球网组件的孔隙.要求和试验方法
NF Q79-003-5-2005 机械安全.印刷和纸张加工机的设计和结构安全要求.第5部分:瓦楞纸板生产机械和平纸板及瓦楞纸板加工机械
NF G62-007-2005 鞋靴.词汇
NF G36-055-2005 纤维绳索和绳索制品.词汇
NF G00-003-2005 纺织品.调湿和试验用标准大气
NF D32-322-1/A2-2005 家用燃气烹饪器具.第2-1部分:能源的合理利用.总则
NF G38-202-2005 土工合成阻挡层. 抗氧化测定用筛选试验方法
NF E64-607-16-2005 木工机械安全.圆盘锯床.第16部分:V切割用双斜角锯床
NF G38-186/A1-2005 土工织物及其相关产品.用于水库和堤坝建造要求的特性
NF S52-308-2-2005 滑翔降落伞设备.滑翔伞.第2部分:飞行安全特征分类的要求和试验方法
NF G38-145-1-2005 土工合成织物.摩擦特性的测定.第1部分:直接剪切试验
NF V03-010-3-2005 食品.硝酸盐和/或亚硝酸盐含量测定.第3部分:硝酸盐到亚硝酸盐酶催化还原后肉制品中硝酸盐和亚硝酸盐含量的光谱测定
NF S52-503-2005 放飞风筝.与降低或平衡拉伸应力相关的安全要求以及与释放有关的安全要求.试验方法
NF C73-828-2005 家用和类似用途电器.安全.第2-28部分:缝纫机的特殊要求
NF S52-502-2005 跳皮筋.跳绳.安全要求和试验方法
NF S52-501-2005 跳皮筋.向公众提供跳皮筋活动的组织的服务任务
NF V01-010-2005 食品安全管理系统.食品链中任一组织的要求
NF G46-001-4-2005 纺织机械.安全要求.第4部分:纱线加工和绳索制造机械
NF G46-001-3-2005 纺织机械.安全要求.第3部分:无纺机械
NF G46-001-5-2005 纺织机械.安全要求.第5部分:织造和针织用的预备机械
NF G38-115-2-2005 土工织物及其有关产品.内部结构连接强度.第2部分:土工合成织物
NF G38-132-2005 土工合成织物.土工合成织物抗冲击损坏的保护效率的测定
NF G38-201-2005 土工合成织物.支撑用土工合成织物的耐锥体穿透性的测定
NF G38-145-2-2005 土工合成织物.摩擦特性的测定.第2部分:倾斜面试验
NF V03-095-2005 食品.痕量元素的测定.压力分解后用氢化法原子吸收光谱测定法测定硒和砷的总含量
NF V05-204-2005 生咖啡.缺陷参考图
NF G62-406/A1-2005 鞋靴.鞋内底和内垫的试验方法.吸水和退吸
NF K20-004-2005 安全存储装置.防盗要求、分类和试验方法.安全柜
NF G38-174-2005 土工合成阻挡层.用作水库和坝结构中流体阻挡层的特征要求
NF V03-010-4-2005 食品.硝酸盐和/或亚硝酸盐含量测定.第4部分:肉制品中硝酸盐和亚硝酸盐含量测定的离子交换色谱(IC)法
NF S74-558-3-2005 潜水服.第3部分:自动加热或冷却服装(装置).要求和试验方法
NF G38-187/A1-2005 土工织物及其相关产品.用于运河建造要求的特性
NF P26-321-2005 建筑五金.锁用圆柱形锁芯.要求和试验方法
NF S74-558-1-2005 潜水服.第1部分:水中服.要求和试验方法
NF S74-558-4-2005 潜水服.第4部分:一个气压潜水服(ADS).人因要求和试验方法
NF G38-173-2005 土工合成阻挡层.用作液体废弃物处置场所或传送站结构中阻挡层的特征要求
NF G08-004-2005 纺织品.使用符号的保养标签规则
NF G39-014-2005 纺织物.抗菌活性的测定.琼脂扩散板试验
NF S51-521-2005 玩具安全.第9部分:有机化合物.要求
NF G36-001-2005 纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳
NF G46-001-2-2005 纺织机械.安全要求.第2部分:纺纱预备和纺纱机械
NF G38-106-2005 土工合成织物.抽样和试样的制备
NF B51-338-1-2005 胶合板.粘合质量.第1部分:试验方法
NF G62-603-2005 鞋靴.鞋附件的试验方法:鞋带.耐磨性
NF C73-839/A1-2005 家用和类似用途电器的安全.第2-39部分:商用多用途电平锅的特殊要求
NF S52-750-2005 滑雪板装配.要求和试验方法
NF G38-182/A1-2005 土工织物及其相关产品.用于铁路建造所需特性
NF G38-188/A1-2005 土工织物及其相关产品.用于隧道和地下结构建造要求的特性
NF G38-190/A1-2005 土工织物及其相关产品.用于固体废料处置的要求特性
NF G38-160-2005 土工织物和土工织物相关产品.耐氧化性测定的筛选试验方法
NF G38-185/A1-2005 土工织物及其相关产品.防蚀工程所需特性
NF S51-212/A11-2005 玩具的安全.第1部分:机械及物理性能
NF G62-307-2005 鞋靴.外底的试验方法.抗弯性
NF G38-184/A1-2005 土工织物及其相关产品.用于排水系统所需特性
NF G38-180/A1-2005 土工织物及其相关产品.用于道路和其他交通区域建造所需特性
NF G38-183/A1-2005 土工织物及其相关产品.用于土方施工、地基和挡土工程所需特性
NF G36-013-2005 纤维绳索.聚酯绳索.3、4 和8股绞绳
总计406626个记录,共407页。 第一页 上一页 下一页 最末页