当前位置: 网站地图

所有标准资料

SAE AS1132 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE ARP998 Crew Restraint System (NONCURRENT Jun 1988)
SAE AS3209 Packing, Preformed - Ams 7276 O-Ring
SAE AS3208 Packing, Preformed - Ams 7276 - Seal
SAE ARP1280 Aerospace - Application Guide for Hydraulic Power Transfer Units
SAE AIR1408 Aerospace Fuel System Specifications and Standards
SAE AIR1404 DC Resistivity Vs RF Impedance of EMI Gaskets
SAE AIR1387 Designing With Elastomers for Use At Low Temperatures, Near Or Below Glass Transition
SAE AS3169 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .3125-24 UNJF-3A
SAE AS3170 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .375-24 UNJF-3A
SAE AS3167 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .190-32 UNJF-3A
SAE AS3168 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A
SAE AS3173 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .5625-18 UNJF-3A
SAE AS3174 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .190-32 UNJF-3A
SAE AS3171 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .4375-20 UNJF-3A
SAE AS3172 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .500-20 UNJF-3A
SAE AS3177 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .375-24 UNJF-3A
SAE AS3178 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .4375-20 UNJF-3A
SAE AS3176 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .3125-24 UNJF-3A
SAE AS3175 Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .250-28 UNJF-3A
SAE AS3179 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .500-20 UNJF-3A
SAE AS3180 Bolt, Machine - Double Hex Extended Washer Head, Drilled, CL Tol Shank, AMS 5643, .5625-18 UNJF-3A
SAE AIR790 Considerations on Ice Formation in Aircraft Fuel Systems
SAE AS3143 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .500-20 UNJF-3A X .4375-20 UNJF-3A
SAE AS3144 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .5625-18 UNJF-3A X .500-20 UNJF-3A
SAE AS3139 Stud Stepped - 2.5 Dia. Engagement, PD Shank, AMS 5731, .250-28 UNJF-3A X .190-32 UNJF-3A
SAE AS3140 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .3125-24 UNJF-3A X .250-28 UNJF-3A
SAE AS3141 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .375-24 UNJF-3A X .3125-24 UNJF-3A
SAE AS3142 Stud, Stepped - 2.5 Dia Engagement, PD Shank, AMS 5731, .4375-20 UNJF-3A X .375-24 UNJF-3A
SAE ARP994 Recommended Practice for the Design of Tubing Installations for Aerospace Fluid Power Systems
SAE AIR1277 Cooling of Modern Airborne Electronic Equipment
SAE AIR1397 Clamp Material, Injection Molded
SAE AS3214 Wire, Safety-Steel, Corrosion and Heat Resistant, AMS 5689
SAE AMS5737 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B
SAE AMS5620 Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 13Cr (0.30 - 0.40C) (SAE 51420F, 51420FSe), F
SAE AMS5648 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo, Solution
SAE AMS5524 Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 13Ni - 2.5Mo (SAE 30316), Solution Heat
SAE AMS5647 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 19Cr - 9.5Ni, Solution Heat Treated
SAE AMS5646 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 11Ni - 0.60Cb(Nb) (347)
SAE AMS5659 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu,
SAE AMS2374 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloy Forgings
SAE AMS2418 Plating, Copper
SAE AMS3667 Polytetrafluoroethylene (PTFE) Sheet, Molded, General Purpose Grade, As Sintered
SAE AMS2808 Identification Forgings
SAE AMS3274 Acrylonitrile Butadiene (Nbr) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant
SAE AMS5645 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 10Ni - 0.40Ti (321), So
SAE AMS3660 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3656 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS2425 Plating, Gold for Thermal Control
SAE AMS2241 Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE AMS5616 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed
SAE AMS3220 Rubber, Synthetic, General Purpose, Fluid Resistant, 55 - 65
SAE AMS3357 Rubber, Silicone (Vmq), Lubricating Oil and Compression Set Resistant, 65-75
SAE AMS2400 Plating, Cadmium
SAE AMS3659 Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved
SAE AMS5612 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Anne
SAE AMS4134 Aluminum Alloy, Die Forgings, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4), Solution Heat Treated
SAE AMS2672 Brazing, Aluminum Torch or Furnace
SAE AMS5639 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 19Cr - 10Ni, Solution Heat Treated
SAE AMS4114 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), as Fabricated
SAE AMS3669 Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered
SAE AMS3668 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS3658 Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically In
SAE AMS2423 Plating, Nickel, Hard Deposit
SAE AMS5507 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 17Cr - 13Ni - 2.5Mo (SAE 30316L), Solution Hea
SAE AMS2806 Identification Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and Alloy Steels and Corrosion and Heat
SAE AMS3336 Silicone (Pvmq) Rubber, Extreme Low Temperature Resistant, 55-65
SAE AS1171 Boss - Fluid Connection, Internal Straight Thread, Shallow Tap
SAE AMS7898 Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought (Cancelled Jul 2002)
SAE AMS7850 Columbium (Niobium) Sheet, Strip, Plate, and Foil
SAE AMS7716 Sheet and Strip, Flat-Rolled, Electrical, Grain-Oriented, 3.15Si, Type 27G053, Type 30G058, or Type 35G066,
SAE AMS7440 Balls, Steel, Low-Chromium, High-Carbon, Hardened and Tempered (NONCURRENT September 1996)
SAE AMS7207 Pins, Spring, Tubular-Corrosion and Moderate Heat Resistant Steel (Ams 5506) (Cancelled Oct 1993)
SAE AMS5890 Nickel, Corrosion and Heat-Resistant, Bars, Forgings, and Extrusions, Thoria Dispersion Strengthened, 2.2Th0
SAE AMS5865 Nickel, Corrosion and Heat Resistant, Sheet and Strip, Thoria Dispersion Strengthened, 2.2Th02 (Cancelled No
SAE AMS5773 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) -
SAE AMS5765 Alloy Bars and Forgings, Corrosion and Heat Resistant 43co 20cr 20ni 4.0mo 4.0w 4.0cb Solution and Precipita
SAE AMS5725 Steel Bars, Corrosion and Heat Resistant 16cr 25.5ni 6.2mo 0.15n (Cancelled Jan 1991)
SAE AMS5690 Steel, Corrosion and Heat Resistant, Wire, 17Cr - 12Ni - 2.5Mo (SAE 30316), Solution Heat Treated
SAE AMS5676 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 80ni 20cr
SAE AMS5642 Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 18Cr - 10.5Ni - 0.60Cb, Free-Machining, Solut
SAE AMS5654 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 11Ni - 0.60Cb (Nb) (347
SAE AMS5632 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.5Mo (0.95 - 1.20C) (SAE 51440F), Free-Machini
SAE AMS5626 Steel, Tool, High Speed Bars and Forgings (Cancelled Jan 1997)
SAE AMS5352 Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C), Annealed
SAE AMS5340 Steel, Corrosion Resistant, Investment Castings, 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu, Homogenization an
SAE AMS5338 Steel, Investment Castings, 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod), Normalized or Normalized and Temp
SAE AMS5335 Steel Castings, Sand, 0.65Cr - 0.75Ni - 0.20Mo (0.25 - 0.33C) (SAE 8630 Modified) Normalized and Tempered (
SAE AMS5221 Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
SAE AMS4127 Aluminum Alloy, Forgings and Rolled Or Forged Rings, (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4102 Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated (Cancelled Nov 2001)
SAE AMS4085 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS4089 Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by
SAE AMS4067 Aluminum Alloy, Drawn Round Seamless Tubing, 1.25Mn - 0.12Cu (3003-H14), Strain Hardened (Cancelled Jul 2007
SAE AMS4001 Aluminum Sheet and Plate, 0.12Cu (1100-0), Annealed (Cancelled Jul 2007)
SAE AMS4003 Aluminum Alloy, Sheet and Plate, 0.12cu (1100-H14), Strain Hardened (Cancelled Apr 2007, Superseded by ASTM
SAE AMS3894 Carbon Fiber Tape and Sheet, Epoxy Resin Impregnated
SAE AMS3711 Core, Honeycomb Fibrous, Aramid Base, Phenolic Coated
SAE AMS3661 Polytetrafluoroethylene (PTFE) Film, Premium Grade
SAE AMS3662 Polytetrafluoroethylene Film, General Purpose Grade
SAE AMS3657 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3571/7 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 55 Durometer 'D'
SAE AMS3571/8 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 65 Durometer 'D'
SAE AMS3571/9 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 75 Durometer 'D'
SAE AMS3571/3 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 65 Durometer 'A'
SAE AMS3571/2 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, Durometer 'A'
SAE AMS3571/6 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 95 Durometer 'A'
SAE AMS3571/5 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 85 Durometer "A"
SAE AMS3571/4 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 75 Durometer 'A'
SAE AMS3571/1 Resin, Polyether Urethane (EU) Casting, Flexible, Solid, Unfilled, 45 Durometer 'A'
SAE AMS3571 Resin, Polyether Urethane (Eu) Casting Flexible, Solid, Unfilled
SAE AMS3346 Silicone Rubber, 1000 Psi (6.89 Mpa) Minimum Tensile Strength, 55-65 Durometer
SAE AMS3356 Silicone (VMQ) Rubber, Lubricating Oil and Compression Set Resistant, Electrical Grade, 55 - 65
SAE AMS3337 Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 65-75
SAE AMS3338 Silicone (PVMQ) Rubber, Extreme-Low-Temperature Resistant, 75 - 85
SAE AMS3345 Silicone Rubber, 1000 Psi (6.90 Mpa) Tensile Strength, 45-55
SAE AMS3244 Chloroprene (Cr) Rubber, Flame Resistant, 65-75
SAE AMS3273 Chloropene (Cr) Rubber Sheet, Nylon Cloth Reinforced, Weather Resistant
SAE AMS3243 Chloroprene (Cr) Rubber Flame Resistant, 55-65
SAE AMS3204 Rubber Synthetic, Low-Temperature Resistant, 25 - 35
SAE AMS3205 Synthetic Rubber Low-Temperature Resistant, 45-55
SAE AMS2671 Copper Furnace Brazing, Corrosion And Heat-Resistant Steels and Alloys
SAE AMS2550 Treatment of Sheet Metal Parts, Corrosion-Resistant Steel (NONCURRENT)
SAE AMS2407 Plating, Chromium, Porous (NONCURRENT)
SAE ARP891 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurements (Eddy Current)
SAE AS1421 Aerospace Selected Diameter - Pitch Combinations of Metric 60掳 Screw Threads for Shaft or Bearing Retaining S
SAE AS117 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to 90掳, Flareless, Lightweight
SAE AS758 Fittings - Installation in Straight Threaded Boss
SAE AS119 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 45掳 to 90掳, Flareless, Lightweight
SAE AS120 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 90掳 to 90掳, Flareless, Lightweight
SAE AS115 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to Straight, Flareless, Lightweight
SAE AS116 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to 45掳, Flareless, Lightweight
SAE ARP246 Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines
SAE AS8015 Minimum Performance Standard for Parachute Assemblies and Components, Personnel
SAE AS683 Installation Procedures and Torques for Fluid Connections
SAE AS3147 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A
SAE AS3148 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A
SAE AS3162 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-
SAE AS3150 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .375-24 UNJF-3A
SAE AS3149 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A
SAE AS3153 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A
SAE AS3152 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Ams 4967, .500-20 Unjf-3a
SAE AS3151 Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A
SAE AS3158 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-
SAE AS3156 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3
SAE AS3157 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3
SAE AS3161 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3
SAE AS3160 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-
SAE AS3159 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .375-24 UNJF-3
SAE ARP504 Ignition System Testing - Metering and Power Supplies
SAE AMS5737 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B
SAE AMS4120 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat T
SAE AMS5726 Steel, Corrosion and Heat-Resistant, Bars and Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V, 1800 掳F
SAE AMS3327 Fluorosilicone (FVMQ) Rubber, High Temperature Fuel and Oil Resistant, 70 - 80
SAE AMS2770 Heat Treatment of Wrought Aluminum Alloy Parts
SAE AMS2615 Pressure Testing, Hydraulic, Pressure as Specified
SAE AMS2405 Electroless Nickel Plating, Low Phosphorus (NONCURRENT)
SAE AMS2424 Plating, Nickel Low-Stressed Deposit
SAE AMS2269 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
SAE AMS5599 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb), So
SAE AMS5698 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe, No. 1 Tem
SAE AMS5713 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS5120 Steel Strip, 0.68 - 0.80C (SAE 1074)
SAE AMS4166 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AS8005 Minimum Performance Standard Temperature Instruments
SAE AMS5040 Steel, Sheet and Strip, 0.15 Carbon, Maximum Deep Forming Grade
SAE AMS5687 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 74Ni - 15.5Cr - 8.0Fe, Annealed
SAE AMS7445 Balls, Steel, Corrosion-Resistant, 17Cr, Hardened
SAE AMS5082 Steel Tubing, Seamless, 0.31 - 0.38C (SAE 1035), Stress Relieved
SAE AMS5080 Steel, Bars, Forgings, and Tubing, 0.31 - 0.38C (SAE 1035)
SAE AMS4108 Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compressio
SAE AMS5383 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti
SAE AMS3870 Ceramic Moldings and Extrusions, Dense Ultra-High Alumina (99% Al203) (NONCURRENT Jan 1993)
SAE AMS2602 Pressure Testing, 25 Psi (Cancelled Feb 2004)
SAE AMS5613 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12.5Cr (SAE 51410), Annealed
SAE AMS5355 Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution
SAE AMS5390 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5ni 22cr 1.5co 9mo 0.6w 18.5fe (N-12mv)
SAE AMS5595 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 9.0Mn - 20Cr - 6.5Ni - 0.28N, Solution Heat Treated
SAE AMS3626 Plastic Moldings and Extrusions, Methyl Methacrylate
SAE AMS7705 Nickel-Iron Magnetic Alloy, Bars and Forgings (Cancelled Dec 2010)
SAE AMS7510 Magnets, Rare-Earth/Cobalt, Permanent, Powder-Metallurgy Product
SAE AMS7210 Cotter Pins, Steel, Corrosion-Resistant 18cr 9.5ni (Cancelled Oct 1993)
SAE AMS5859 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu, Consumable Elec
SAE AMS5712 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS5684 Alloy Welding, Electrodes, Covered, Corrosion and Heat Resistant 72ni 15cr 9fe 2.8(Cb + Ta) (Cancelled Apr 1
SAE AMS5683 Alloy Welding Wire, Corrosion and Heat Resistant, 75Ni - 15.5Cr - 8Fe (NONCURRENT)
SAE AMS5655 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-
SAE AMS5624 Steel Bars High Expansion, 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C), Cold Finished (NONCURRENT)
SAE AMS5585 Alloy, Corrosion and Heat Resistant, Welded Tubing, 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.
SAE AMS5581 Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb), A
SAE AMS5394 Alloy Iron Castings, Ductile, Sand, Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 3.0C), Stress Relieved
SAE AMS5397 Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015
SAE AMS5399 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings, 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al
SAE AMS5358 Steel Castings, Investment, Corrosion Resistant, 18Cr - 9Ni, Solution Heat Treated
SAE AMS5369 Steel Castings, Sand, Corrosion and Heat Resistant 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.50 (Cb+Ta) - 0.32Ti Sol
SAE AMS5372 Steel Castings, Sand, Corrosion Resistant 16Cr - 1.9Ni (Type 431 Mod) Normalized and Tempered (Cancelled Mar
SAE AMS5370 Steel, Corrosion and Heat Resistant, Investment Casting 19cr 9.5ni (Cf-3), Solution Heat Treated
SAE AMS5375 Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W As Cast (Cancelled Mar
SAE AMS5378 Alloy Castings, Investment, Corrosion and Heat Resistant , 65Co - 25Cr - 1.8Ni - 5.0W, as Cast (Cancelled Ap
SAE AMS5376 Alloy, Corrosion and Heat Resistant, Investment Castings, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb -
SAE AMS5384 Alloy Castings, Investment, Corrosion and Heat Resistant, 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006
SAE AMS5353 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 1.8Ni - 0.08N, as Cast
SAE AMS5349 Steel, Corrosion-Resistant, Investment Castings, 13Cr, Free Machining; Hardened and Tempered
SAE AMS5121 Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed
SAE AMS5110 Carbon Steel, Wire and Springs, 0.75 - 0.88C (SAE 1080), Spring Temper, Cold Drawn
SAE AMS5115 Wire, Carbon Steel, 0.60 - 0.75C, Hardened and Tempered (NONCURRENT)
SAE AMS5077 Steel Tubing, Welded, (0.22 - 0.28C) (SAE 1025), Normalized or Stress Relieved (Cancelled Sep 2009)
SAE AMS5070 Steel, Bars and Forgings, 0.18 - 0.23C (SAE 1022)
SAE AMS5031 Steel, Welding Wire, 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C), Vacuum Melted, Environment Controlled P
SAE AMS4619 Manganese Bronze Forgings, 58cu 39.8zn 1.05fe 0.95al 0.23mn (Cancelled Jan 1977)
SAE AMS4162 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Re
SAE AMS4163 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stre
SAE AMS4125 Aluminum Alloy Die Forgings, and Rolled or Forged Rings, 0.90Si - 0.62Mg - 0.25Cr, (6151-T6) Solution and Pr
SAE AMS4141 Aluminum Alloy Die Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), Solution and Precipitation Heat Trea
SAE AMS4107 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE AMS3902 Cloth, Organic Fiber (Para-Aramid), High Modulus for Structural Composites
SAE AMS3880 Crystallized Glass Ceramic (NONCURRENT Jan 1993)
SAE AMS3815 Braid, Flat, Nylon, Electrical Tying Synthetic Rubber Coated (NONCURRENT Jan 1993)
SAE AMS3816 Braid, Flat, Nylon, Electrical Tying Wax Coated (NONCURRENT Jan 1993)
SAE AMS3682 Coating Material, Electrically Conductive Silver-Organic Resin
SAE AMS3681 Adhesive, Electrically Conductive, Silver-Filled Epoxy Resin
SAE AMS3627 Plastic Moldings And Extrusions, Methyl Methacrylate Heat-Resistant (Cancelled Oct 1995)
SAE AMS3348 Silicone (VMQ) Rubber, 1150 psi (7.93 MPa) Tensile Strength, High Resiliency, 25 - 35
SAE AMS3349 Silicone (VMQ) Rubber, 1100 psi (7.58 MPa) Tensile Strength, High Resiliency, 65 - 75
SAE AMS3307 Rubber, Silicone (VMQ), Low Compression Set, Non-Oil-Resistant, 65 - 75
SAE AMS3250 Synthetic Rubber and Cork Composition, General Purpose, Soft
SAE AMS3232 Asbestos and Synthetic Rubber Sheet, Hot Oil Resistant (Cancelled Sep 2009)
SAE AMS3125 Enamel, Glyceryl Phthalate, Engine Gray Baking (Cancelled Jun 2009)
SAE AMS3122 Enamel, Phenolic, Black Baking (Cancelled Jun 2009)
SAE AMS3120 Enamel, Glyceryl Phthalate, Black Baking (Cancelled Jun 2009)
SAE AMS3137 Resin, Conformal Coating, Urethane Elastomer (Cancelled Oct 1995)
SAE AMS3087 Compound, Insulating And Sealing Silicone (Cancelled Oct 1995)
SAE AMS2820 Packaging, Aerosol (Cancelled Dec 2000)
SAE AMS2675 Brazing, Nickel Alloy Filler Metal
SAE AMS2370 Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Wrought Products and Forging Stock
SAE AIR1402 Common Termination Method, Electrical Wiring System, Application Of
SAE AS478 Identification Marking Methods
SAE AMS4928 Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes, 6Al - 4V, Annealed
SAE AMS2404 Plating, Electroless Nickel
SAE AMS2410 Plating, Silver, Nickel Strike, High Bake
SAE AMS4926 Titanium Alloy, Bars, Wire, and Rings, 5Al - 2.5Sn, Annealed, 110 ksi (758 MPa) Yield Strength
SAE AMS4935 Titanium Alloy Extrusions and Flash Welded Rings, 6Al - 4V, Annealed, Beta Processed
SAE AMS4953 Titanium Alloy Welding Wire, 5Al - 2.5Sn
SAE AMS7510/2 Magnets, Rare-Earth/Cobalt, Permanent, Samarium/Cobalt, 33/67 18 (143) 250
SAE AMS7510/1 Magnets, Rare-Earth/Cobalt, Permanent, Samarium/Cobalt, 33/67 15 (119) 250
SAE AMS4010 Aluminum Alloy Foil, 1.25Mn - 0.12Cu (3003-H18) (Cancelled Oct 2006)
SAE AS3067 Nut, Self-Locking, Double Hexagon, Reduced Envelope, As7251
SAE AS136 Hose Assembly, Metal - Medium Pressure, Flareless, Welded, Straight to Straight
SAE AS141 Hose Assembly, Metal - Medium Pressure, Flareless, Welded, 90掳 to 90掳
SAE AS140 Hose Assembly, Metal - Medium Pressure, Flareless, Welded, 45掳 to 90掳
SAE AS139 Hose Assembly, Metal - Medium Pressure, Flareless, Welded, 45掳 to 45掳
SAE AS138 Hose Assembly, Metal - Medium Pressure, Flareless, Welded, Straight to 90 Degrees
SAE AMS5843 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti -
SAE AMS5842 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti -
SAE ARP1382 Design Criteria for Balancing Machine Tooling
SAE AS1414 Propeller Shaft End - Flanged, 5.125 (130.175) Bolt Circle
SAE AS1376 Alternate Dimensions, Center Body Section, Shape Fluid Fittings, Design Standard
SAE AMS5841 Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars, 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti -
SAE AS3062 Bolts, Screws and Studs - Screw Thread Requirements
SAE ARP1233 Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max
SAE ARP1232 Gland Design, Elastomeric O-Ring Seals, Static Radial
SAE AMS2376 Qualification, Approval, and Control of Premium-Quality Forgings, Alloy Steels and Heat-Treatable Corrosion
SAE AIR1489 Aerospace Landing Gear Systems Terminology
SAE AS150171 Gasket - Copper, Tube Connection
SAE AIR1407 Prediction Procedure for Near-Field and Far-Field Propeller Noise
SAE AS3225 Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS 4490
SAE AS3222 Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS 4490
SAE AS3220 Sleeve, Flared, Tube Fitting - Aluminum
SAE AS1130 Air and Air/Surface (Platform) Cargo Pallets
SAE ARP881 Lamps for Aircraft Lighting
SAE AS701 Boss Design for Spark Igniters
SAE AMS3044 Magnetic Particles, Fluorescent, Wet Method, Dry Powder
SAE AMS7490 Rings, Flash Welded, Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt
SAE AMS5643 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
SAE AMS4050 Aluminum Alloy, Plate 6.2zn 2.3cu 2.2mg 0.12zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Over
SAE AMS4068 Aluminum Alloy, Drawn Seamless Tubing, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511), Solution Heat
SAE AMS2804 Identification Castings
SAE AMS3045 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-to-Use
SAE AMS5617 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Va
SAE AMS3195 Silicone Rubber Sponge, Closed Cell, Medium
SAE AMS3570 Foam, Flexible Polyurethane, Open Cell, Medium Flexibility
SAE AMS5050 Steel Tubing, Seamless, 0.15 Carbon, Maximum, Annealed
SAE AS972 Spline Details, Accessory Drives and Flanges
SAE AMS1526 Cleaner for Aircraft Exterior Surfaces, Water-Miscible, Pressure-Spraying Type
SAE AMS1527 Cleaner for Aircraft Exterior Surfaces, Water-Miscible, Foam-On, Pressure-Spraying
SAE AMS5506 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 13Cr (0.30 - 0.40C) (SAE 51420), Annealed
SAE AMS5069 Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018)
SAE ARP1525 Hydrogen Embrittlement Effect on Metals By Aircraft Maintenance Chemicals, Mechanical Test Methods (Cancelle
SAE ARP1511 Corrosion of Low-Embrittling Cadmium Plate By Aircraft Maintenance Chemicals (Cancelled Oct 1991, Superseded
SAE AMS7458 Studs Steel, Low-Alloy Heat Resistant, Normalized and Tempered, Roll Threaded, 135,000 Psi (931 Mpa) Tensile
SAE AMS7210 Cotter Pins, Steel, Corrosion-Resistant 18cr 9.5ni (Cancelled Oct 1993)
SAE AMS5747 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti -
SAE AMS5754 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W
SAE AMS5583 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe
SAE AMS5532 Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W
SAE AMS5364 Steel, Corrosion and Heat-Resistant, Investment Castings, 19.5Cr - 10.5Ni - 0.65Cb (CF-8C), Solution Heat Tr
SAE AMS5342 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu, Homogenization, Soluti
SAE AMS5112 Carbon Steel, Wire, Spring Quality Music Wire 0.70 - 1.00C Cold Drawn
SAE AMS5053 Steel Tubing, Welded, 0.13 Carbon, Maximum, Annealed (Cancelled Sep 2009)
SAE AMS4146 Aluminum Alloy Forgings and Rolled or Forged Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4), Solution H
SAE AMS4112 Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished (Cancelled Jan 1996,
SAE AMS4066 Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511) Solutio
SAE AMS4056 Aluminum Alloy, Sheet and Plate, 4.4Mg - 0.70Mn - 0.15Cr (5083-0), Annealed
SAE AMS3823 Cloth, Glass Style 7781, Chrome-Silane Finish (NONCURRENT Apr 1994)
SAE AMS3647 Polyfluoroethylene Propylene Film and Sheet
SAE AMS3645 Polychlorotrifluoroethylene, Compression Molded-Heavy Sections, Unplasticized
SAE AMS3646 Sheet, Polychlorotrifluoroethylene (Pctfe) Molded, Unplasticized
SAE AMS3252 Synthetic Rubber and Cork Composition, General Purpose, Firm
SAE AMS3251 Synthetic Rubber and Cork Composition, General Purpose, Medium
SAE AMS3244 Chloroprene (Cr) Rubber, Flame Resistant, 65-75
SAE AMS3243 Chloroprene (Cr) Rubber Flame Resistant, 55-65
SAE AMS3204 Rubber Synthetic, Low-Temperature Resistant, 25 - 35
SAE AMS3205 Synthetic Rubber Low-Temperature Resistant, 45-55
SAE AMS3194 Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature
SAE AMS3193 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3110 Primer, Zinc Chromate (Cancelled Jun 2009)
SAE AMS2633 Ultrasonic Inspection, Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders (NONCURRENT Apr 2007)
SAE AMS2607 Pressure Testing, 100 Psi (Cancelled Feb 2004)
SAE AMS2413 Plating, Silver-Rhodium
SAE AMS1500 Soap, Liquid Hand, Coconut-Oil Base (NONCURRENT Apr 1994)
SAE AMS1475 Deodorant, Aircraft Toilet, Formaldehyde Base (Cancelled Aug 2001)
SAE AMS1476 Deodorant, Aircraft Toilet
SAE AMS1528 Cleaner for Aircraft Exterior Surfaces, Emulsion, Pressure-Spray Type
SAE AMS1529 Cleaner for Aircraft Exterior Surfaces, Emulsion, Foam-On, Pressure-Spray Type
SAE AIR853 Disconnect Systems, Accessory Drive Shaft
SAE AMS4124 Aluminum Alloy, Rolled Or Cold Finished Bars, Rods, and Wire 5.6zn 2.5mg 1.6cu 0.23cr (7075-T7351), Solution
SAE ARP1512 Corrosion Of Aluminum Alloys By Aircraft Maintenance Chemicals,Sandwich Test
SAE AMS7488 Rings, Flash Welded Aluminum and Aluminum Alloys
SAE AMS7454 Bolts And Screws, Low-Alloy Steel, Heat Resistant Normalized Andtempered, Roll Threaded 135,000 Psi (Cancell
SAE AMS4348 Core, Honeycomb Aluminum Alloy, Corrosion Inhibited, for Sandwich Construction, 5052, 350 (177)
SAE AMS3196 Silicone Rubber Sponge, Closed Cell, Firm
SAE AS8010 Aviator's Breathing Oxygen Purity Standard
SAE AIR1266 Fault Isolation in Environmental Controls Systems of Commercial Transports
SAE AIR1423 Electromagnetic Compatibility on Gas Turbine Engines for Aircraft Propulsion
SAE ARP492 Aircraft Engine Fuel Pump Cavitation Endurance Test
SAE AMS5882 Nickel Alloy, Corrosion and Heat Resistant, Forgings, 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B, S
SAE AMS5851 Nickel Alloy, Corrosion and Heat Resistant, Powder 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, as Fabricated (C
SAE AMS5852 Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Po
SAE ARP603 Impulse Testing of Hydraulic Hose, Tubing, and Fittings Assemblies (Cancelled Jun 2008)
SAE ARP1308 Preferred Electrical Connectors for Aerospace Vehicles and Associated Equipment (NONCURRENT Mar 2002)
SAE AIR1537 Report on Aircraft Engine Containment
SAE AIR1392 Oxygen System Maintenance Guide
SAE AMS5524 Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 13Ni - 2.5Mo (SAE 30316), Solution Heat
SAE AMS4185 Filler Metal, Aluminum Brazing 12Si (4047)
SAE AMS5513 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr - 9.2Ni (SAE 30304), Solution Heat Treated
SAE AMS5599 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb), So
SAE AMS5515 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 18Cr - 8.5Ni (302), Solution Heat Treated, High Ductili
SAE AMS5523 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 23Cr - 13.5Ni (SAE 30309S), Solution Heat Trea
SAE AMS5521 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 25Cr - 20Ni (SAE 30310S), Solution Heat Treate
SAE AMS5512 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 18Cr - 10.5Ni - 0.80Cb (SAE 30347), Solution H
SAE AMS4116 Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Solution He
SAE AS8017 Minimum Performance Standard for Anticollision Light Systems
SAE AMS5544 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti
SAE AMS2400 Plating, Cadmium
SAE AMS5571 Steel, Corrosion and Heat-Resistant, Seamless Tubing, 18Cr - 10.5Ni - 0.70Cb (Nb), Solution Heat Treated
SAE AMS5671 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70
SAE AMS5557 Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr - 10.5Ni - 0.40Ti (SAE 3032
SAE AMS5510 Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Hea
SAE AMS5122 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (NONCURRENT Jul 2008)
SAE AMS5507 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 17Cr - 13Ni - 2.5Mo (SAE 30316L), Solution Hea
SAE AMS5506 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 13Cr (0.30 - 0.40C) (SAE 51420), Annealed
SAE AMS5595 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 9.0Mn - 20Cr - 6.5Ni - 0.28N, Solution Heat Treated
SAE AMS4130 Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated (NON
SAE AMS4016 Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized
SAE AMS4016 Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized
SAE ARP1409 Aircraft On Board Weight and Balance System Requirements
SAE AMS7716 Sheet and Strip, Flat-Rolled, Electrical, Grain-Oriented, 3.15Si, Type 27G053, Type 30G058, or Type 35G066,
SAE AMS7712 Sheet and Strip, Flat-Rolled, Electrical, Non-Oriented, 3.0(Si+Al), Type 47s178 Or Type 64s194, Semi-Process
SAE AMS7711 Sheet and Strip, Flat-Rolled, Electrical, Non-Oriented, 2.65(Si+Al), Type 47S188 or Type 64S213, Semi-Proces
SAE AMS7496 Rings, Flash Welded, Carbon and Low-Alloy Steels
SAE AMS7211 Cotter Pins, Steel 18cr 10.5ni 0.40ti, Corrosion and Heat Resistant Steel (Cancelled Oct 1993)
SAE AMS5781 Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.10n (Cancelled
SAE AMS5603 Sheet and Strip 15cr 8.4ni 2.2mo 1.1al Vacuum Induction Melted, Solution Heat Treated (Cancelled May 2001)
SAE AMS5585 Alloy, Corrosion and Heat Resistant, Welded Tubing, 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.
SAE AMS5586 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al -
SAE AMS5581 Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb), A
SAE AMS5526 Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant, 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0
SAE AMS5514 Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated
SAE AMS5061 Steel, Low Carbon Bars, and Wire, 0.08 - 0.20 (NONCURRENT Feb 2009)
SAE AMS4200 Aluminum Alloy, Plate 7.7zn 2.4mg 1.6cu 0.16cr Solution Heat Treated, Stress Relieved, and Precipitation Hea
SAE AMS4184 Filler Metal, Aluminum Brazing, 10Si - 4.0Cu (4145)
SAE AMS4083 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), Soluti
SAE AMS4086 Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing, 4.4Cu - 1.5Mg - 0.6Mn (2024-T3), Solution Heat Trea
SAE AMS4015 Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-0) Annealed
SAE AMS4017 Aluminum Alloy, Sheet and Plate, 2.5mg 0.25cr, (5052-H34), Strain-Hardened, Half-Hard, and Stabilized
SAE AMS3226 Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil and Coolant Resistant, Low Swell, 45-55
SAE AMS3170 Thinner, Alcohol-Ester (Cancelled Feb 2008)
SAE AMS3108 Primer, Ocher Phenolic (Cancelled Jun 2009)
SAE AMS1550 Cleaner, Water Base, Aircraft Interior Hard Surface Materials
SAE AMS1650 Polish, Aircraft Metal
SAE AMS1631 Cleaner, Carpet Water Extraction Type
SAE AMS1630 Cleaner, Carpet, Shampoo Type
SAE AMS1626 Desmutter, Aluminum, Liquid
SAE AMS1625 Desmutter, Aluminum, Powdered
SAE AMS1532 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1532 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Emulsion-Type
SAE AMS1530 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off
SAE AMS1531 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids
SAE AIR944 Pneumatic Ground Power Supplies for Starting Aircraft (NONCURRENT Apr 2004)
SAE AMS1375 Remover, Paint, Epoxy and Polyurethane Paint Systems
SAE AMS1376 Remover, Epoxy Paint Acid-Type, Thickened
SAE AMS5517 Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile S
SAE AMS5528 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated, Precipitat
SAE AMS5518 Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength
SAE AMS5516 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated
SAE AMS7461 Bolts and Screws, Titanium Alloy 6al 4v, Upset Headed, Heat Treated, Roll Threaded
SAE AMS5556 Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE 30347) So
SAE AMS3867/1 Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E374 (Type B0.102-E191)
SAE AMS3867/3 Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)
SAE AMS3867/2 Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E374 (Type B0.142-E190)
SAE AMS3020 Oil, Reference, for "L" Stock Rubber Testing
SAE ARP767 Impact Protective Design of Occupant Environment Transport Aircraft
SAE ARP1323 Type Measurements of Aircraft Interior Sound Pressure Levels During Cruise
SAE AS8007 Minimum Safe Performance Overspeed Warning Instruments
SAE AS3226 Tube Tee, Boss - Ams 5646
SAE AS1516 Helicopter Fuel Economy Evaluation
SAE ARP1395 Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Ma
SAE AIR1494 Verification of Landing Gear Design Strength (Cancelled Apr 2010)
SAE AIR1394 Cabling Guidelines for Electromagnetic Compatibility
SAE J1216 Test Methods for Metric Threaded Fasteners
SAE AS968 Flange - Accessory, 10.000 Bc Round, Design Standard For
SAE AS966 Flange - Accessory, 8.000 Bc Round, Design Standard For
SAE AS964 Flange - Accessory, 5.000 Bc Round, Design Standard For
SAE AS1055 Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components
SAE ARP876 Gas Turbine Jet Exhaust Noise Prediction
SAE ARP1383 Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Comp
SAE ARP1420 Gas Turbine Engine Inlet Flow Distortion Guidelines
SAE AIR1243 Anti Blow-By Design Practice for Cap Strip Seals
SAE AIR1425 Methods of Achieving Electromagnetic Compatibility of Gas Turbine Engine Accessories, for Self-Propelled Veh
SAE AMS5377 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73ni 12cr 4.5mo 2.0cb 0.70ti 0.05c 6.0al 0.0
SAE AMS3656 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3215 Acrylonitrile Butadiene (Nbr) Rubber Aromatic Fuel Resistant 65-75
SAE AMS4082 Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS4153 Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treate
SAE AMS5042 Steel, Sheet and Strip, 0.15 Carbon, Maximum Forming Grade (NONCURRENT Aug 2009)
SAE AMS5044 Steel, Sheet and Strip, 0.15 Carbon, Maximum, Half Hard Temper
SAE AMS5047 Steel, Sheet and Strip, 0.08 - 0.13C, Aluminum Killed (SAE 1010), Deep Forming Grade
SAE AMS5344 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization, Solution, an
SAE AIR1377 Fire Test Equipment for Flexible Hose and Tube Assemblies
SAE ARP1524 Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding
SAE ARP1538 Arresting Hook Installation, Land-Based Aircraft
SAE AMS7493 Rings, Flash Welded, Ferritic and Martensitic Corrosion-Resistant Steels
SAE AMS7498 Rings, Flash Welded, Titanium and Titanium Alloys
SAE AMS7295/9 Radiographic Paper, 2.0-80
SAE AMS7295/8 Radiographic Paper, 2.5-80
SAE AMS7295/7 Radiographic Film, 3-30
SAE AMS7295/6 Radiographic Film, 3-30
SAE AMS7295/5 Radiographic Film, 3-80
SAE AMS7295/4 Radiographic Film, 4-60
SAE AMS7295/3 Radiographic Film, 4-80
SAE AMS7295/2 Radiographic Film, 5-60
SAE AMS7295/1 Radiographic Film, 5-80
SAE AMS5775 Welding Electrodes, Covered, Corrosion and Heat-Resistant Steel, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N (Cancelled A
SAE AMS5656 Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings, 9.0Mn - 20Cr - 6.5Ni - 0.27N, Solut
SAE AMS5392 Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.1Cr - 15Ni - 6.5Cu (2.4 - 2.8C), as Cast
SAE AMS5393 Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 2.8C), Stress Relieved
SAE AMS5361 Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant, 18.5Cr - 13.5Ni - 2.1Mo, Solution Heat T
SAE AMS5363 Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant, 18.5Cr - 10.5Ni - 0.90 (Cb+Ta), Solution
SAE AMS5027 Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C), Vacuum Melted, Environment-Controlled P
SAE AMS5045 Steel, Sheet and Strip, 0.25 Carbon, Maximum, Hard Temper
SAE AMS4152 Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated
SAE AMS4147 Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved b
SAE AMS3904 Organic Fiber (Para-Aramid), Yarn and Roving, Intermediate Modulus for Cables, Cordage, and Woven Goods
SAE AMS3812 Rods, Glass Fiber, Polyester Resin, Coated, Pultrusion
SAE AMS3811 Rods, Aramid Fiber, Polyester Resin Coated, Pultrusion
SAE AMS3813 Rope, Aramid Fiber, Jacketed, for Antenna-Support Systems
SAE AMS3813/1 Rope, Aramid Fiber, Jacketed, Cabled Strand, Extruded Jacket
SAE AMS3813/2 Rope, Aramid Fiber, Jacketed - Parallel Strand, Extruded Jacket
SAE AMS3813/3 Rope, Aramid Fiber, Jacketed, Parallel Yarn, Braided Jacket
SAE AMS3664 Cloth, Glass, Vinyl Coated
SAE AMS3641 Plastic Moldings, Thermosetting Phenol/Formaldehyde, Macerated-Fabric-Filled (Cancelled Oct 1995)
SAE AMS3635 Plastic Sheet and Strip, Modified Vinyl, Foamed, Closed Cell
SAE AMS3590 Plastic Sheet, Copper Faced Paper Reinforced Phenolic Resin (Cancelled Oct 1995)
SAE AMS3587 Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Pigmented, Very Flexible, Heat Shrinkable Low
SAE AMS3320 Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 - 80
SAE AMS3126 Aluminum Coating Material, Corrosion and Heat Resistant, Thermosetting, Inorganic Binder (NONCURRENT Aug 200
SAE AMS3145 Paint, Marking Epoxy
SAE AMS2521 Coating, Reflection-Reducing for Instrument Glasses
SAE AMS2605 Pressure Testing, 55 Psi (Cancelled Feb 2004)
SAE AMS2606 Pressure Testing, 70 Psi (Cancelled Feb 2004)
SAE AMS2310 Qualification Sampling and Testing of Steels for Transverse Tensile Properties
SAE AIR732 Heat Transfer Problems Associated With Aerospace Vehicles (Cancelled Apr 1978)
SAE AMS7467 Bolts And Screws, Corrosion And Heat Resistant Nickel Alloy Upsetheaded, Roll Threaed, Stress-Ruptur (Cancel
SAE AMS3904/2 Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 400 Denier, 1.75% Finish
SAE AMS3904/3 Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 1010 Denier, 1.75% Finish
SAE AMS3904/4 Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 1000 Denier, 1.5% Finish for Weaving
SAE AMS3904/1 Yarn, Organic Fiber (Para-aramid), Intermediate Modulus, 200 Denier, 1.75% Finish
SAE AMS3904/5 Yarn, Organic Fiber (Para-Aramid), Intermediate Modulus, 1500 Denier, 1% Finish for Cable and Cordage
SAE AMS2375 Control of Forgings Requiring First Article Approval
SAE AS3074 Gasket - 37掳 Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998)
SAE AS3072 Gasket - 37掳 Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998)
SAE ARP147 Environmental Control Systems Terminology
SAE AIR1375 Minimum Safety Requirements for Special Purpose Airline Ground Support Equipment
SAE AS3074 Gasket - 37掳 Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998)
SAE AS3072 Gasket - 37掳 Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998)
SAE ARP1278 Oscilloscopic Method of Measuring Spark Energy
SAE AMS5398 Steel, Corrosion-Resistant, Sand and Centrifugal Castings, 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu, Solution Heat
SAE AMS5618 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C), Consumable
SAE AMS4037 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Tre
SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat
SAE AMS2753 Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath
SAE AMS2403 Plating, Nickel, General Purpose
SAE AMS2301 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
SAE AMS2241 Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE AMS4121 Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), So
SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By
SAE AMS4169 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieve
SAE AMS4168 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieve
SAE AMS5545 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.
SAE AMS4190 Aluminum Alloy, Welding Wire 5.2Si (4043)
SAE AMS2360 Room Temperature Tensile Properties of Castings
SAE AMS5382 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 54Co - 25.5Cr - 10.5Ni - 7.5A, As-Cast
SAE AMS2252 Tolerances, Low-Alloy Steel Sheet, Strip, and Plate
SAE AMS4101 Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T851), Solution Heat Treated, Stretched, and Precipitati
SAE AMS5872 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 48Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.
SAE AMS5385 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 62Co - 27Cr - 2.8Ni - 5.5Mo, As-Cast
SAE AMS5388 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 53.3ni 16.5cr 17mo 4.5w 5.8fe 0.40v (Cw-12mw
SAE AMS5350 Steel, Corrosion and Moderate Heat-Resistant, Investment Castings, 12.5Cr (SAE 51410), Hardened and Tempered
SAE AMS5333 Steel, Investment Castings, 0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615), Normalized
SAE AMS5032 Wire, Steel, 0.18 - 0.23C (SAE 1020), Annealed
SAE AMS4036 Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Al
SAE AMS3572 Resin Polyurethane, Foam-In-Place, Rigid (NONCURRENT Oct 1992)
SAE AMS2361 Elevated Temperature Tensile Properties of Castings
SAE AMS1320 Remover, Decal Adhesive
SAE AIR806 Air Conditioning of Aircraft Cargo
SAE AIR1490 Environmental Degradation of Textiles
SAE AS486 Aircraft Circuit Breaker and Fuse Arrangement (Cancelled Jul 1978)
SAE AMS4970 Titanium Alloy Bars and Forgings 7Al - 4Mo Solution and Precipitation Treated
SAE AMS4772 Silver Alloy, Brazing Filler Metal, 54Ag - 40Cu - 5.0Zn - 1.0Ni, 1325 to 1575 掳F (718 to 857 掳C) Solidus-Liq
SAE AMS2362 Stress-Rupture Properties of Castings
SAE ARP1348 Baggage/Cargo Trailer Requirements
SAE MA3259 Pin - Cotter, Corrosion Resistant Ams 7211, Metric Series
SAE AS3259 Pin - Cotter, Cres Ams 7211, Metric Series (Cancelled Aug 1978)
SAE AIR984 Air Bleed Objective for Helicopter Turbine Engines
SAE AS931 Fitting, Adapter, Union, Flareless to Boss
SAE AS934 Fitting, Adapter, Reducer/Expander, Flared to Boss
SAE AS933 Fitting, Adapter, Union, Flared to Boss
SAE AIR1467 Gas Energy Limited Starting Systems
SAE AIR1466 Hydraulic Energy Limited Engine Starting Systems
SAE AMS5629 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuu
SAE AMS4140 Aluminum Alloy Die Forgings, 4.0Cu - 2.0Ni - 0.68Mg (2018-T61), Solution and Precipitation Heat Treated (NON
SAE AMS3357 Rubber, Silicone (Vmq), Lubricating Oil and Compression Set Resistant, 65-75
SAE AMS2303 Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Pr
SAE AMS4161 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), Solution Heat Treated and Naturally
SAE AMS7730 Depleted Uranium Castings (Cancelled Sep 2009)
SAE AMS5362 Steel, Corrosion and Heat Resistant, Investment Castings, 19Cr - 12Ni - 1.0Cb (Nb), Solution Heat Treated
SAE AMS4154 Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Soluti
SAE AS8016 Vertical Velocity Instrument (Rate-Of-Climb)
SAE AMS5390 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5ni 22cr 1.5co 9mo 0.6w 18.5fe (N-12mv)
SAE AS8018 Minimum Performance Standard for Mach Meters
SAE ARP766 Restraint Device for Small Children (Cancelled Oct 1978)
SAE ARP1192 Procedure for Calibration and Verification of a Liquidborne Particle Counter: An Absolute Standard (Cancel
SAE AMS7819 Molybdenum Alloy Bars, 0.48Ti - 0.90Zr - 0.02C, Arc Cast, Stress Relieved
SAE AMS7702 Nickel-Iron Alloy, Magnetic, Sheet and Strip, Cold Rolled, Half-Hard Temper (Cancelled Dec 2010)
SAE AMS7701 Nickel-Iron Alloy, Magnetic, Sheet and Strip, Annealed (Cancelled Oct 2010)
SAE AMS5614 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12Cr - 0.50Mo, Annealed
SAE AMS5346 Steel, Corrosion-Resistant, Investment Castings, 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu, Solution and Precipitat
SAE AMS4164 Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4089 Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by
SAE AMS4090 Aluminum Alloy, Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, an
SAE AMS4085 Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
SAE AMS4084 Aluminum Alloy, Sheet 5.7zn 2.2mg 1.6cu 0.22cr Solution and Precipitation Heat Treated
SAE AMS4087 Aluminum Alloy Tubing, Seamless, Drawn, (2024-0), Reinstate Composition Annealed
SAE AMS4088 Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worke
SAE AMS3579 Plastic Tubing, Electrical Insulation, Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable, 1.6 to
SAE AMS3356 Silicone (VMQ) Rubber, Lubricating Oil and Compression Set Resistant, Electrical Grade, 55 - 65
SAE AMS3135 Coating Material, Silicone Resin, 400 掳F (205 掳C) (Cancelled Jun 2009)
SAE AMS3091 Mold Release Agent
SAE AMS2435 Coating, Tungsten Carbide-Cobalt Coating, Detonation Process (NONCURRENT Jun 2007)
SAE AMS1451 Disinfectant, Aircraft for Use in Cargo Compartments
SAE AIR1558 Interface Protective Devices - Ground Equipment to Aircraft
SAE AIR1358 Aerospace Information Report for Continuous Flow Oxygen Hose Disconnect Fittings
SAE AMS6350 Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMS6514 Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Elect
SAE AS1506 Hose, Air Duct, Semiflexible, Sleeve Section, Unreinforced, Self Extinguishing
SAE AS1501 Hose, Air Duct, Flexible Nonmetallic, Aircraft
SAE AS1544 Hose, Air Duct, Flexible, Helical, Nonmetallic Wire Supported (Covered), Silicone Rubber, Self Extinguishing
SAE ARP594 Fuel Pump Thermal Safety Design
SAE AIR797 Hose Characteristics and Selection Chart
SAE ARP1536 Abrasion Test Procedure for Chafe Guard
SAE ARP1482 Recommendations for Fuel and Oil System Schematics
SAE AMS5832 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50A
SAE AMS5566 Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (SAE 30304) High Pressure, Cold
SAE AMS1640 Corrosion Removing Compound, for Aircraft Surfaces
SAE AMS5837 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb(Nb)
SAE AMS5617 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Va
SAE AMS5544 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti
SAE AMS5571 Steel, Corrosion and Heat-Resistant, Seamless Tubing, 18Cr - 10.5Ni - 0.70Cb (Nb), Solution Heat Treated
SAE AMS5578 Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Pl
SAE AMS5860 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu, Multiple Melted,
SAE AMS5859 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu, Consumable Elec
SAE AMS5773 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) -
SAE AMS5580 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe, Annealed
SAE AMS5579 Steel, Corrosion and Heat Resistant Tubing, Welded, 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb + Ta) - 0.22Ti,
SAE AMS5572 Steel, Corrosion and Heat-Resistant, Seamless Tubing, 25Cr - 20Ni (SAE 30310S), Solution Heat Treated
SAE AMS5519 Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile
SAE AMS5531 Sheet, Strip and Plate, Corrosion and Heat Resistant 30fe 21cr 20ni 20co 3.0mo 2.5w 1.0(Cb + Ta) 0.15n (Canc
SAE AMS4128 Aluminum Alloy Bars, Rolled or Cold Finished, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451), Solution Heat Tr
SAE AMS4118 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si, (2017; -T4,
SAE AMS4119 Aluminum Alloy, Bars, Rolled Drawn, Or Cold Finished 4.4cu 1.5mg 0.60mn Stress-Relief Stretched (Cancelled J
SAE AMS4071 Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing, 2.5Mg - 0.25Cr (5052-O), Annealed
SAE AMS4079 Aluminum Alloy, Drawn, Round, Seamless, Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O), Close Tolerance,
SAE AMS4069 Aluminum Alloy, Drawn, Round Seamless Tubing, Close Tolerance, 2.5Mg - 0.25Cr (5052-0) Annealed
SAE AMS4070 Aluminum Alloy, Drawn, Round Seamless Tubing, 2.5Mg - 0.25Cr (5052-0), Annealed
SAE AMS4065 Aluminum Alloy, Drawn Seamless Tubing, 1.2Mn - 0.12Cu (3003-0), Annealed (Cancelled Jul 2007, Superseded by
SAE AMS2825 Material Safety Data Sheets
SAE AMS1450 Disinfectant (Insecticide), Aircraft
SAE AMS5558 Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin Wall, Solution He
SAE AMS4129 Aluminum Alloy, Bars, Rolled Or Cold Finished 1.0mg 0.60si 0.28cu 0.20cr Stress Relief Stretched
SAE AS3219 Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard For
SAE AS3217 Ring, Retaining-Spiral, Internal, Light Duty, Cres
SAE AS3216 Ring, Retaining-Spiral, External, Heavy Duty, Cres
SAE AS3215 Ring, Retaining-Spiral, Internal, Heavy Duty, Cres
SAE AS3218 Ring, Retaining-Spiral, External, Light Duty, Cres
SAE AS158 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 90掳 to 90掳, Flared, Lightweight
SAE AS155 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to 90掳, Flared, Lightweight
SAE AS156 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 45掳 to 45掳, Flared, Lightweight
SAE AS153 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to Straight, Flared, Lightweight
SAE AS154 Hose Assembly, PTFE, Cress Reinforced, 3000 psi, 400 掳F, Straight to 45掳, Flared, Lightweight
SAE ARP1356 Life Rafts
SAE AIR764 Skid Control System Vibration Survey
SAE AIR1564 Cross Reference for Materials for Fluid Systems Components Including Military and Federal Specifications and
SAE AS3293 Gasket - 37掳 Flared Tube Fitting, Copper, AMS 4500 (NONCURRENT Feb 1998)
SAE AS3282 Gasket - 37掳 Flared Tube Fitting, Nickel, AMS 5553 (NONCURRENT Feb 1998)
SAE AS1503 Hose, Air Duct, Flexible, Helical Metallic Wire, Supported (Covered), Self Extinguishing
SAE AS1043 Safety Wire Holes, Hex, Fitting, Location of Design Standard
SAE ARP1311 Landing Gear Structures and Mechanisms
SAE ARP1307 Measurement of Exterior Noise Produced By Aircraft Auxiliary Power Units (Apus) and Associated Equipment Dur
SAE ARP1401 Aircraft Fuel System and Component Icing Test
SAE AS1339 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 掳F, Lightweight, Hydraulic and Pne
SAE AS1473 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to Straight (NONCURRENT Oct 1994)
SAE AS1472 Hose Assembly, Low Pressure, Flareless, Potable Water
SAE AS1474 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 45掳 (NONCURRENT Oct 1994)
SAE AS1487 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, 45掳 to 90掳
SAE AS1486 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, 45掳 to 45掳
SAE AS1488 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, 90掳 to 90掳
SAE AS1478 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 90掳 to 90掳 (NONCURRENT Oct 0194)
SAE AS1483 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, Straight to Straight
SAE AS1484 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, Straight to 45掳
SAE AS1485 Hose Assembly, Semi-Rigid, Low Pressure, Flareless, Potable Water, Straight to 90掳
SAE AS1475 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 90掳 (NONCURRENT Oct 1994)
SAE AS1476 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45掳 to 45掳 (NONCURRENT Oct 1994)
SAE AS1477 Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45掳 to 90掳 (NONCURRENT Oct 1994)
SAE AIR1599 Ground Equipment Rebuild Program
SAE AS8009 Pressure Altimeter Systems
SAE AS1495 Shaft Nut and Keywasher Installation Dimensions For
SAE AS1508 Undercuts for Straight Screw Threads - Metric
SAE ARP1217 Instrumentation Requirements for Turboshaft Engine Performance Measurements
SAE AMS3823 Cloth, Glass Style 7781, Chrome-Silane Finish (NONCURRENT Apr 1994)
SAE AMS3579 Plastic Tubing, Electrical Insulation, Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable, 1.6 to
SAE AIR1204 Control of Water Carryover From the Environmental Control System and Condensation on the Structure
SAE AMS5694 Steel, Corrosion and Heat-Resistant, Welding Wire, 27Cr - 21.5Ni
SAE AMS5662 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.
SAE AMS3644 Plastic: Polyimide, for Molded Rod, Bar, and Tube, Plaque, and Formed Parts
SAE AMS3044 Magnetic Particles, Fluorescent, Wet Method, Dry Powder
SAE AMS5845 Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode
SAE AMS5798 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
SAE AMS5640 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 18Cr - 9.0Ni, Free Machining
SAE AMS2269 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
SAE AMS5824 Steel, Corrosion Resistant, Welding Wire 17cr 7.1ni 1.0al
SAE AMS5515 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 18Cr - 8.5Ni (302), Solution Heat Treated, High Ductili
SAE AMS2411 Plating, Silver, for High Temperature Applications
SAE AMS5825 Steel, Corrosion Resistant, Welding Wire 16.4cr 4.8ni 0.22cb 3.6cu
SAE ARP1493 Wheel and Hydraulically Actuated Brake Design and Test Requirements for Military Aircraft
SAE AMS5801 Cobalt Alloy, Corrosion and Heat Resistant, Welding Wire 39co 22cr 22ni 14.5w 0.07la
SAE AMS5786 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe (NONCURRENT Nov 20
SAE AMS2480 Phosphate Treatment, Paint Base
SAE AMS2242 Tolerances, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and P
SAE AMS4100 Aluminum Alloy, Alclad, Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761), Solution and Precipitation
SAE AMS5844 Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrod
SAE AMS5667 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70A
SAE AMS4029 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4049 Aluminum Alloy, Sheet and Plate, Alclad, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate
SAE AMS2481 Phosphate Treatment, Antichafing
SAE AS3106 Screw, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .164-36 Unjf-3a
SAE AS3101 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
SAE AS3099 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .190-32 UNJF-3A
SAE AS3098 Screw, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .164-36 UNJF-3A
SAE AS3100 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .250-28 UNJF-3A
SAE AS3110 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .375-24 UNJF-3A
SAE AS3108 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .250-28 Unjf-3a
SAE AS3111 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a
SAE AS3109 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
SAE AS3116 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A
SAE AS3117 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .375-24 Unjf-3a
SAE AS3112 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
SAE AS3113 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731, .5625-18 UNJF-3A
SAE AS3114 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a
SAE AS3115 Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, Cres AMS 5731, .250-28 UNJF-3A
SAE AS3105 Bolt, Machine - Hexagon Head, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a
SAE AS3104 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .500-20 UNJF-3A
SAE AS3102 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .375-24 UNJF-3A
SAE AS3103 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .4375-20 UNJF-3A
SAE AS3107 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731, .190-32 Unjf-3a
SAE AS3120 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a
SAE AS3119 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .500-20 Unjf-3a
SAE AS3118 Bolt, Machine - Hexagon Head, Drilled 6 Holes, Pd Shank, Cres Ams 5731, .4375-20 Unjf-3a
SAE AMS7482 Studs Steel, Corrosion and Heat Resistant, Roll Threaded After Heat Treatment, 1800Mdf (980Mdc), Solution He
SAE AMS7473 Bolts and Screws Roll Threaded (Cancelled Jan 1991)
SAE AMS7458 Studs Steel, Low-Alloy Heat Resistant, Normalized and Tempered, Roll Threaded, 135,000 Psi (931 Mpa) Tensile
SAE AMS7456 Studs, Low-Alloy Steel Heat Treated, Rolled Threaded (Uns G87400) (Cancelled Jul 2002)
SAE AMS5870 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al,
SAE AMS5827 Steel, Corrosion Resistant, Covered Welding Electrodes 16.4cr 4.8ni 0.22cb 3.6cu (Cancelled Sep 2000, Supers
SAE AMS5840 Steel, Corrosion and Heat Resistant, Welding Wire, 13Cr - 8.0Ni - 2.3Mo - 1.1Al, Vacuum Melted
SAE AMS5782 Steel, Corrosion and Heat-Resistant, Welding Wire, 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti, Vacuum I
SAE AMS5783 Steel Welding Electrodes, Covered, Corrosion and Heat Resistant, 19.5cr 8.8ni 0.50mo 1.5w 1.0cb (Cancelled M
SAE AMS5785 Steel Welding Electrode, Covered, Corrosion and Heat Resistant 28.5cr 9.5ni (Cancelled Mar 1999)
SAE AMS5795 Iron Alloy, Corrosion and Heat Resistant, Covered, Welding Electrodes, 31fe 21cr 20ni 20co 3.0mo 2.5w 1.0(Cb
SAE AMS5797 Cobalt Alloy, Corrosion and Heat-Resistant, Covered Welding Electrodes, 51.5Co - 20Cr - 10Ni - 15W
SAE AMS5804 Steel, Corrosion and Heat Resistant, Welding Wire 15cr 25.5 Ni 1.3mo 2.2ti 0.006b 0.30v
SAE AMS5805 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V, Vacuum In
SAE AMS5812 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 7.1Ni - 2.4Mo - 1.0Al, Vacuum Induction Melted
SAE AMS5771 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings and Rings, 74Ni - 7.0Cr - 16.5Mo, Solution Heat T
SAE AMS5780 Steel, Corrosion and Heat-Resistant, Welding Wire, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N
SAE AMS5758 Alloy, Corrosion-Resistant, Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacu
SAE AMS5695 Steel, Corrosion and Heat Resistant, Covered Welding Electrodes 25cr 20ni (Cancelled Jun 2000)
SAE AMS5681 Welding Electrodes, Covered, Steel, Corrosion and Heat Resistant, 19.5cr 10ni 0.60(Cb+Ta)
SAE AMS5641 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 18.5Cr - 10Ni - 0.22Se (SAE 30303Se), Free-Machining;
SAE AMS5638 Steel, Corrosion-Resistant, Bars and Forgings, 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303MA), Free-Machinin
SAE AMS5609 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr - 0.12Cb (SAE 51410 Modif
SAE AMS5606 Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 41.5ni 16cr 37fe 2.9cb 1.8ti Consumable Electro
SAE AMS5607 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 73Ni - 7.0Cr - 16.5Mo, Solution Heat Tr
SAE AMS5605 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 41.5Ni - 16Cr - 37Fe - 2.9Cb(Nb) - 1.8T
SAE AMS5555 Nickel Wire and Ribbon 99ni
SAE AMS5500 Steel, Corrosion-Resistant, Laminated, Sheet,Surface Bonded
SAE AMS5505 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 12Cr (SAE 51410 Modified), Ferrite Controlled,
SAE AMS5504 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410), Annealed
SAE AMS5036 Steel Sheet and Strip, Aluminum Coated, Low Carbon (NONCURRENT September 2001)
SAE AMS4113 Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat
SAE AMS4081 Aluminum Alloy, Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Soluti
SAE AMS4064 Aluminum Alloy, Clad Two Sides Sheet, 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet), Annealed
SAE AMS4063 Aluminum Alloy, Clad One Side, Sheet, 1.25 Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed
SAE AMS4012 Aluminum Sheet, Laminated, Edge Bonded (NONCURRENT)
SAE AMS3849 Cloth, Quartz, Style 581 Fabric, Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE AMS3583 Plastic Tubing, Electrical Insulation Crosslinked Polyvinylchloride, Semi-Rigid Heat Shrinkable 2 To (Cancel
SAE AMS3584 Plastic Tubing, Electrical Insulation, Polytetrafluoroethylene, Heat Shrinkable, Overexpanded (Cancelled Oct
SAE AMS3021 Fluid, Reference, for Testing Di-Ester (Polyol) Resistant Material
SAE AIR1064 Braking System Dynamics
SAE AMS2243 Tolerances, Corrosion and Heat-Resistant Steel Tubing
SAE AMS4921 Titanium Bars, Wire, Forgings, and Rings, Commercially Pure, 70 ksi (483 MPa) Yield Strength
SAE AMS7467 Bolts And Screws, Corrosion And Heat Resistant Nickel Alloy Upsetheaded, Roll Threaed, Stress-Ruptur (Cancel
SAE AMS3582 Plastic Tubing, Electrical Insulation, Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable, 2 to 1 Shr
SAE AMS2421 Plating-Magnesium for Solderability Zinc Immersion Process
SAE ARP603 Impulse Testing of Hydraulic Hose, Tubing, and Fittings Assemblies (Cancelled Jun 2008)
SAE ARP1523 Air Mode Insulated Containers - Thermal Efficiency Requirements
SAE AS685 Piloted Ring Seal Fluid Connection Bosses
SAE AS3319 Stud - Straight, Ring Locked, Cres AMS5731, .190-24UNJC X .190-32UNJF
SAE AS3320 Stud - Straight, Ring Locked, Cres AMS5731, .250-20UNJC X .250-28UNJF
SAE AS3322 Stud - Straight, Ring Locked, Cres AMS5731, .375-16UNJC X .375-24UNJF
SAE AS3265 Washer - Flat Load Spreading, Metric, AMS 5525
SAE ARP914 Glossary of Electrical Connection Terms
SAE AMS5608 Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 40Co - 22Cr - 22Ni - 14.5W - 0.07La, So
SAE AMS4037 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Tre
SAE AMS4035 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed
SAE AMS2374 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloy Forgings
SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat
SAE AMS3628 Plastic Extrusions and Moldings, Polycarbonate, General Purpose
SAE ARP1234 Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Backup Rings
SAE AMS5800 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 54ni 19cr 11co 10mo 3.2ti 1.5al 0.006b
SAE AMS4144 Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), S
SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By
SAE AMS4169 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieve
SAE AMS5671 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70
SAE AMS2816 Identification Welding Wire, Tab Marking Method
SAE AS117 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to 90掳, Flareless, Lightweight
SAE ARP1575 Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Han
SAE AMS5548 Steel, Corrosion and Heat-Resistant, Sheet and Strip, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, 1850 to 1975 掳F (1010
SAE AMS3609 Methyl Methacrylate Plastic, Sheet Heat Resistant
SAE AS119 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 45掳 to 90掳, Flareless, Lightweight
SAE AS120 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 90掳 to 90掳, Flareless, Lightweight
SAE AS1132 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE AS115 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to Straight, Flareless, Lightweight
SAE AS116 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, Straight to 45掳, Flareless, Lightweight
SAE AS118 Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 掳F, 45掳 to 45掳, Flareless, Lightweight
SAE ARP1612 Polyamide Printed Circuit Boards Fabrication Of
SAE AMS7724 Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant, 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co -
SAE AMS7717 Nickel-Iron Alloy, Magnetic, Sheet and Strip, 50Ni - 50Fe, Annealed, Forming Grade
SAE AMS7471 Bolts and Screws, Nickel Alloy, Corrosion and Heat Resistant, Upset Headed, Heat Treated, Roll Threaded, 195
SAE AMS7498 Rings, Flash Welded, Titanium and Titanium Alloys
SAE AMS7304 Springs, Steel, 0.85 - 1.05C, Hardened and Tempered After Forming (NONCURRENT November 2001)
SAE AMS7301 Steel, Highly-Stressed Springs, 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150), Case Hardened (NONCURRENT Aug 2009
SAE AMS7273 Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil resistant for Seals in Fuel systems and Specific
SAE AMS7236 Rivets, Alloy Corrosion and Heat Resistant, 52co 20cr 10ni 15w, Solution Heat Treated (Cancelled Oct 1990, S
SAE AMS7235 Rivets, Steel, Corrosion and Heat Resistant 15cr 25.5ni 1.2mo 2.1ti 0.006b 0.30v 1650Mdf (900Mdc) Solution H
SAE AMS7234 Rivets, Blind, Corrosion Resistant Alloy 67ni 31cu (Cancelled Oct 1990)
SAE AMS7240 Washers, Spring Lock, Carbon Steel (Cancelled Jul 2007)
SAE AMS5895 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti
SAE AMS5858 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
SAE AMS5674 Steel, Corrosion and Heat Resistant, Wire, 18Cr - 11.5Ni - 0.70Cb (SAE 30347), Solution Heat Treated
SAE AMS5637 Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated and Cold Drawn, 1
SAE AMS5525 Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V
SAE AMS4173 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relie
SAE AMS4036 Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Al
SAE AMS3751 Microspheres, Hollow Glass
SAE AMS3709 Syntactic Foam Tiles (NONCURRENT Jan 1993)
SAE AMS3698 Adhesive Film, Hot-Melt, Addition-Type Polyimide, for Foam Sandwich Structure, -55 to +230Mdc (-65 to +450Md
SAE AMS3715 Core, Honeycomb, Glass/Phenolic
SAE AMS3716 Core, Honeycomb, Glass/Phenolic, Bias Weave Fiber Construction
SAE AMS3711 Core, Honeycomb Fibrous, Aramid Base, Phenolic Coated
SAE AMS3619 Resin, Polyimide, Laminating High Temperature Resistant, 315 掳C (599 掳F)
SAE AMS3249 Ethylene Propylene (Epdm) Rubber, Hydrazine-Base-Fluid Resistant, 75-85
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS2426 Coating, Cadmium Vacuum Deposition
SAE AMS1452 Disinfectant, Aircraft, General Purpose
SAE AMS1533 Cleaner for Exterior Aircraft Surfaces, Gel-Type, Solvent-Base
SAE AMS1535 Cleaner, Transparent Plastic
SAE AIR1557 High and Extended Vibration Environment (Cancelled Oct 1979)
SAE AMS2371 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steels and Alloys, Wrought Products and
SAE AMS7205 Pins, Spring, Tubular Carbon Steel
SAE AS478 Identification Marking Methods
SAE AMS2408 Plating, Tin
SAE ARP597 Wheels and Brakes, Supplementary Criteria for Design Endurance, Civil Transport Aircraft
SAE ARP573 Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems
SAE AMS3320 Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 - 80
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS5759 Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52Co - 20Cr - 10Ni - 15W
SAE AMS5401 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 62ni 21.5cr 9.0mo 3.6cb (Nb), Vacuum Melted
SAE AMS2400 Plating, Cadmium
SAE AMS2300 Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
SAE AMS3065 Compound, Corrosion Preventive Thin Film, Fingerprint Removing
SAE AMS5631 Steel, Corrosion-Resistant, Bars and Forgings, 17Cr (0.60 - 0.75C) (SAE 51440A)
SAE AIR1377 Fire Test Equipment for Flexible Hose and Tube Assemblies
SAE AMS7320 Rings, Sealing, Cast Leaded-Tin Bronze, 80Cu - 16Sn - 5Pb, As Cast
SAE AMS2468 Hard Anodic Coating Treatment of Aluminum Alloys (Cancelled Sep 1999, Superseded by AMS2469)
SAE AS8020 Minimum Performance Standards for Engine Driven Dc Generators/ Starter-Generators and Associated Voltage Regu
SAE AS620 Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Ai
SAE ARP1611 Quality Inspection Procedure, Composites, Tracer Fluoroscopy and Radiography
SAE AMS7733 Steel Wire, Copper Clad, Round, 99Fe - 0.45Mn (0.13C max), Annealed
SAE AMS7734 Nickel-Iron Alloy Wire, Copper Clad, Round, 42Ni - 56.5Fe, Annealed Dumet (Cancelled May 2006)
SAE AMS7732 Steel Wire, Copper Clad, Round, 99Fe - 0.32Mn, Annealed
SAE AMS7731 Gold Wire and Ribbon, 99.97Au, Annealed
SAE AMS7718 Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings, 50Ni - 50Fe
SAE AMS7322 Rings, Sealing, Cast Tin Bronze 80cu 19sn as Cast
SAE AMS7253 Nuts, Self-Locking, Corrosion And Heat Resistant Alloy Highstrength, All Metal 1400 F (760 C) Use, U (Cancel
SAE AMS7250 Nuts, Self-Locking Steel, Corrosion and Heat Resistant, High Strength, All-Metal, 1200Mdf Use, Unified (Mil
SAE AMS5697 Steel, Corrosion-Resistant, Wire, 19Cr - 9.5Ni (SAE 30304), Solution Heat Treated
SAE AMS5402 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 62ni 21.5cr 9.0mo 3.6cb (Nb) as Cast
SAE AMS4007 Aluminum Alloy, Foil 4.4cu 1.5mg 0.60mn (Cancelled Aug 1999)
SAE AMS4004 Aluminum Alloy, Foil, 2.5Mg - 0.25Cr (5052-H191), Strain Hardened
SAE AMS3710 Sandwich Structures, Glass Fabric-Resin, Low Pressure Molded, Heat Resistant
SAE AMS3581 Cast Rods, Tubes, And Shapes, Methyl Methacrylate Plastic Heatresistant (Cancelled Oct 1995)
SAE AMS3580 Cast Rods, Tubes, And Shapes, Methyl Methacrylate Plastic (Cancelled Oct 1995)
SAE AMS2505 Aluminum Paint Finishing, Low Baking (Cancelled Dec 2008)
SAE AS1633 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to St
SAE AS683 Installation Procedures and Torques for Fluid Connections
SAE AS1635 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to 90
SAE AS1634 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to 45
SAE AMS7459 Bolts and Screws Steel, Low Alloy Heat Resistant 195,000 Psi Hardened & Tempered, Roll Threaded
SAE AS1581 Fitting, Sleeve, Flareless Acorn to Integral Weld Ring, 3000 psi
SAE AS1583 Fitting, Tee, Integral Weld Ring, 3000 psi
SAE AS1584 Fitting, Elbow, 90掳, Integral Weld Ring, 3000 psi
SAE AS1582 Fitting, Adapter, External Thread Flareless to Integral Weld Ring, 3000 psi
SAE AS1585 Fitting, Reducer, Integral Weld Ring, 3000 Psi
SAE AS1578 Bellmouth Tube End, Welding
SAE AS1579 Fitting End, Integral Weld, Lip, Design Standard
SAE AS1580 Ring, Weld, 3000 psi, Titanium
SAE AS1130 Air and Air/Surface (Platform) Cargo Pallets
SAE ARP1621 ULD for Aircraft Transportation of Horses
SAE ARP1527 Color Coding - Elastomers for Tube Clamp Cushions
SAE ARP1515 Threaded Fastener Protrusion Through Self-Locking Nuts
SAE AIR1589 Aircraft Damage Caused By Ground Support Equipment
SAE AMS2750 Pyrometry
SAE AMS2658 Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
SAE AMS2770 Heat Treatment of Wrought Aluminum Alloy Parts
SAE AMS2315 Determination of Delta Ferrite Content
SAE AMS5864 Steel, Corrosion-Resistant, Plate, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode
SAE AMS5544 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti
SAE AMS3025 Polyalkalene Glycol Heat Treat Quenchant
SAE AMS5880 Steel, Corrosion-Resistant, Bars, Wires, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C), for Bearin
SAE AMS2268 Chemical Check Analysis Limits Cast Nickel And Nickel Alloys
SAE AMS5520 Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate, 15Cr - 7.1Ni - 2.5Mo - 1.1Al, Solution H
SAE AMS2694 In-Process Welding of Castings
SAE AMS3607 Plastic Sheet, Cotton Fabric Reinforced Phenol-Formaldehyde
SAE MA1549 Wrenching Configuration, 12 Spline, For Metric Threaded Fasteners
SAE AS8028 Powerplant Fire Detection Instruments, Thermal & Flame Contact Types (Reciprocating and Turbine Engine Powere
SAE AS686 Piloted Ring Seal Tube Swivel Connection Assembly
SAE ARP1709 Couplings Assembly, Hydraulic Self-Sealing, Quick Disconnect
SAE ARP1643 Fabrication of Carbon Fiber/Polysulfone Resin Composite Structures (Cancelled Jun 1995)
SAE AMS7735 Alloy Wire, Round, 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn, Solution Heat Treated
SAE AMS7469 Bolts and Screws, Corrosion and Heat Resistant, Nickel Alloy, Upset Headed, Heat Treated, Roll Threaded, 205
SAE AMS5376 Alloy, Corrosion and Heat Resistant, Investment Castings, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb -
SAE AMS4172 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress R
SAE AMS3940 Fiberboard, Hard-Pressed, Structural
SAE AMS2503 Black Finishing, Low Baking Enamel (NONCURRENT Mar 2004)
SAE AMS1725 Skin Protective Compound, Chemical Barrier (Cancelled Jul 2005)
SAE AMS1426 Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol Base
SAE AIR1615 Thesaurus for Fuel System Components
SAE AMS2630 Inspection, Ultrasonic, Product Over 0.5 Inch (12.7 mm) Thick
SAE ARP504 Ignition System Testing - Metering and Power Supplies
SAE AMS3899/2 Carbon Fiber Tape and Sheet, Polysulfone Resin Impregnated, C PS 140 (956) Tensile, 27 (186) Modulus, 120
SAE AMS3899/1 Carbon Fiber Tape and Sheet, Polysulfone Resin Impregnated, C PS 172 (1170) Tensile, 16 (110) Modulus, 120
SAE AMS2510 Engine Gray Finishing Low Baking
SAE AS8031 Personal Protective Devices for Toxic and Irritating Atmospheres, Air Transport Crew Members
SAE AS1299 Adapter - Port Connection Ring Locked to Flareless Tube End (NONCURRENT Aug 2003)
SAE ARP1623 Guide for Preparing An Ecs Computer Program UserS Manual (Cancelled Mar 1992)
SAE AS714 Aircraft Hydraulic Start Motor
SAE AMS5682 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 78Ni - 20Cr
SAE AMS5529 Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Pr
SAE AS3240 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-20 UNJF-3
SAE AS3238 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-24 UNJF-3
SAE AS3239 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-24 UNJF-3
SAE AS3236 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-32 UNJF-3
SAE AS3237 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-28 UNJF-3
SAE AMS2406 Plating, Chromium, Hard Deposit
SAE AMS5561 Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing, 9.0Mn - 20Cr - 6.5Ni - 0
SAE AMS5562 Steel, Corrosion and Heat Resistant, Seamless Tubing, 9.0Mn - 20Cr - 6.5Ni - 0.28N, Solution Heat Treated
SAE AMS5699 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe, Spring Te
SAE AS3243 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .1900-
SAE MAM2243 Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing (Cancelled Sep 2007, Superseded by AMS2243)
SAE MAM2242 Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Stri
SAE AS3234 Bolt, Tee Head - Ams 5708, Chamfered, .3125-24 Unjf-3a
SAE AS3235 Bolt, Tee Head - Cres, UNS N07001, 165 ksi min, Chamfered, .3750-24 UNJF-3A
SAE AS3233 Bolt, Tee Head - Ams 5708, Chamfered, .2500-28 Unjf-3a
SAE AS3232 Bolt, Tee Head - AMS 5708, Chamfered, .1900-32 UNJF-3A
SAE AS3248 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-
SAE AS3249 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-
SAE AS3250 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3245 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3125-
SAE AS3246 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .3750-
SAE AS3247 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .4375-
SAE AS3244 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres, UNS N07718, 185 ksi min, .2500-
SAE AS3241 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5000-20 UNJF-3
SAE AS3242 Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres, UNS N07718, 185 ksi min, .5625-18 UNJF-3
SAE AS3256 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3254 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3253 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3255 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3251 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AS3252 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Cres, UNS N07718, 185
SAE AMS7493 Rings, Flash Welded, Ferritic and Martensitic Corrosion-Resistant Steels
SAE AMS7272 Rings, Sealing, Butadiene-Acrylonitrile (Nbr) Rubber Synthetic Lubricant Resistant 67-75
SAE AMS7271 Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 - 70
SAE AMS7270 Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant 65 - 75
SAE AMS7250 Nuts, Self-Locking Steel, Corrosion and Heat Resistant, High Strength, All-Metal, 1200Mdf Use, Unified (Mil
SAE AMS7260 Rings, Butadiene-Acrylonitrile (Nbr) Rubber, Molded Fuel and Low Temperature Resistant 70-80
SAE AMS7267 Rings, Sealing, Silicone (Vsi) Rubber, Heat-Resistant, Low Compression Set, 70-80
SAE AMS7211 Cotter Pins, Steel 18cr 10.5ni 0.40ti, Corrosion and Heat Resistant Steel (Cancelled Oct 1993)
SAE AMS5874 Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0
SAE AMS5850 Steel, Corrosion and Heat-Resistant, Honeycomb Core, Resistance Welded, Square Cell
SAE AMS5772 Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings and Rings, 40Co - 22Cr - 22Ni - 14.5W - 0.07La, S
SAE AMS5779 Alloy Welding Electrodes, Covered, Corrosion and Heat-Resistant, 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al
SAE AMS5677 Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 75ni 19.5cr 1.6(Cb + Ta) (Cancelled Mar 1999
SAE AMS5611 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Cons
SAE AMS5582 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe
SAE AMS3637 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Flexible, Heat Shrinkable, 2 to 1 Shrin
SAE AMS3625 Elastomeric Tubing, Electrical Insulation, Crosslinked Silicone, Pigmented, Flexible, Heat-Shrinkable, 1.750
SAE AMS3588 Plastic Tubing, Electrical Insulation, Irradiated Polyolefin, Clear, Very Flexible, Heat Shrinkable 2 to 1 S
SAE AMS3674 Plastic Moldings, Electrical Insulation, Crosslinked Polyolefin, Pigmented, Flexible, Heat Shrinkable
SAE AS954 Wrenches, Hand, Twelve Point, High Strength, Thin Wall
SAE AS1043 Safety Wire Holes, Hex, Fitting, Location of Design Standard
SAE ARP1146 Combination Evacuation Slide/Raft - Civil Air Transport (Cancelled Jan 2008)
SAE AIR1593 Clamp Loads and Bending Stresses in Aircraft Tubing Installations
SAE AS3332 Gasket - Copper, Tube Connection, Plain
SAE ARP735 Aerospace Vehicle Cryogenic Duct System (Cancelled Sep 1980)
SAE AS3268 Sleeve, Half-Reinforcing, Tube
SAE AS3269 Sleeve, Half-Reinforcing, Tube, Shoulder
SAE AS3257 Clamp, Loop-Cushioned, Cres, High Temperature, .204 Hole
SAE AS1424 Hose Assemblies, Metal, Medium Pressure, High Temperature
SAE ARP876 Gas Turbine Jet Exhaust Noise Prediction
SAE ARP583 Flight Attendant Stations
SAE ARP1201 Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings
SAE AIR1672 Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfac
SAE AIR1103 Introduction to Pressure Suite Assemblies (Cancelled Sep 1980)
SAE AS1637 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 45掳 to 90掳
SAE AS1636 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 45掳 to 45掳
SAE AMS5821 Steel, Corrosion Resistant, Welding Wire 12cr (SAE 51410 Modified) Ferrite Control Grade
SAE AMS5663 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) -
SAE AMS2422 Plating, Gold
SAE AMS5796 Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire, 52Co - 20Cr - 10Ni - 15W
SAE ARP1256 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
SAE MAM2202 Tolerances, Metric, Aluminum Alloy and Magnesium Alloy Sheet and Plate (Cancelled Jan 1991, Superseded by AN
SAE AS3261 Nut, Self-Locking, Clip, Floating, Ams 7251
SAE ARP1674 Automated Manufacture of Continuous Multi-Ply Graphite Fiber/Epoxy Resin Impregnated Broadgoods
SAE AMS7471 Bolts and Screws, Nickel Alloy, Corrosion and Heat Resistant, Upset Headed, Heat Treated, Roll Threaded, 195
SAE AMS5865 Nickel, Corrosion and Heat Resistant, Sheet and Strip, Thoria Dispersion Strengthened, 2.2Th02 (Cancelled No
SAE AMS5794 Iron Alloy, Corrosion and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0
SAE AMS5817 Steel, Corrosion and Moderate Heat Resistant, Welding Wire 13cr 2.0ni 3.0w
SAE AMS5763 Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings, 15Cr - 6.5Ni - 0.75Mo - 0.50Cb (Nb) - 1.5Cu, S
SAE AMS5715 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 60.5Ni - 23Cr - 14Fe - 1.4Al ,Anneale
SAE AMS5664 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90T
SAE AMS5652 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni - 2.0Si (SAE 30314)
SAE AMS5587 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe,
SAE AMS5588 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe, S
SAE AMS5022 Steel, Bars, Forgings, and Tubing, Free-Cutting, 0.14 - 0.20C (SAE 1117) (NONCURRENT Aug 2006)
SAE AMS5028 Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC), Vacuum Melted, Environment-Contr
SAE AMS5010 Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215)
SAE AMS4111 Aluminum Alloy Forgings, 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73), Solution and Precipitation Heat Treated
SAE AMS3913 Radome, Foam Sandwich, Hot-Melt, Addition-Type, Polyimide
SAE AMS3895 Broadgoods and Tape, Carbon Fiber-Epoxy Resin Impregnated, Multi-Ply, Uniform Fiber
SAE AMS3138 Coating Materials, Fluorocarbon (FKM) Elastomeric
SAE AMS3022 Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials, 10% Aromatic Content
SAE AMS5604 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb, Solution Heat Treated,
SAE AS1072 Sleeve, Hose Assembly, Fire Protection
SAE ARP450 Flight Deck Visual, Audible, and Tactile Signals (Cancelled Dec 1980)
SAE AIR1698 Hose Assembly Identification Practices
SAE AMS5666 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings, 62Ni - 21.5Cr - 9.0Mo - 3
SAE AMS5784 Steel, Corrosion and Heat Resistant, Welding Wire 29cr 9.5ni
SAE AMS5688 Steel, Corrosion-Resistant, Wire, 18Cr - 9.0Ni (SAE 30302), Spring Temper
SAE AMS3670 Polyamide-Imide Bar, Rod, and Shapes, Molded Or Extruded
总计406626个记录,共407页。 第一页 上一页 下一页 最末页