ANSI/SAE J1525-1985 汽车纤维增强塑料粘接用胶粘剂的搭接剪切测试
ANSI/SAE J1326-1985 测量湿润传色特性的测试方法
ANSI/SAE J1491-1985 车辆加速测量
ANSI/SAE J1487-1985 空调蒸发器送风和与冷却能力额定值
ANSI/SAE J1402-1985 汽车空气制动软管和软管组件
ANSI Z315.1-1985 三轮自行车的安全要求
ANSI/FCI 81-1-1985 温度调节器压力额定值检验
ANSI/AAMI NS4-1985 经皮电刺激的神经刺激器
ANSI/AAMI ST19-1985 保健设施中饱和蒸汽灭菌过程的生物指示剂
ANSI/ADA 55-1985 牙科汞齐用合金及汞的分配器
ANSI/ASME B89.3.4M-1985 旋转轴的规定和试验方法
ANSI/ASME B16.15-1985 125级和250级青铜铸造螺纹配件
ANSI/ASME B18.6.7M-1985 米制机用螺钉
ANSI/API 590-1985 钢管线盲板
ANSI/NAPM IT2.29-1985 摄影.感光光源:日光和白炽钨丝灯规范
ANSI/SAE J1374-1985 液压缸推杆密封圈耐久性测试程序
ANSI/IEEE 473-1985 无线电噪声.电磁场测量(10KHz到10GHz)的推荐实施规程
ANSI/EIA 519-1985 模压多孔聚苯乙烯包装材料
ANSI/ASQC C1-1985 质量保证计划的一般要求
ANSI/ASQC B1, B 2, B 3-1985 质量控制图表、数据分析方法和生产中质量控制用指南
ANSI 217-1985 电影胶片(70mm).磁录音的录音特性.条型发行拷贝
ANSI/SMPTE 217-1985 磁性声音记录的录制特性.条形发行拷贝
ANSI/SMPTE 216-1985 磁性声音记录的录制特性.四声迹条发行拷贝
ANSI 183M-1985 电影胶片.光电输出系数的测量.光声级测试胶片
ANSI 10M-1985 电影胶片(16 mm).电影放映机的管理(SMPTE)
ANSI 216-1985 电影胶片(35mm).四磁道条型发行拷贝
ANSI PH2.17-1985 摄影(感光测定).密度测量.反射密度的几何条件
ANSI PH2.29-1985 摄影(感光测定).感光测定用发光体.日光灯和钨丝白炽灯的规范
ANSI PH2.18-1985 摄影(感光测定).密度测量.光谱条件
ANSI/SAE J1281-1985 娱乐摩托艇驾驶员所经受(噪声)声级的估算程序
ANSI/ASME PTC36-1985 工业嘈声的测量
ANSI N13.15-1985 辐射探测器.专用热致发光剂量测定系统.性能
ANSI/ANS 6.4.2-1985 辐射屏蔽材料的规范
ANSI/SAAMI Z299.5-1985 商业制造用在误操作情况下新型轻武器设计的评价标准
ANSI/AHA A194.1-1985 纤维素纤维板
ANSI B65.1-1985 印刷机驱动控制器的安全规范
ANSI Z86.11-1985 水下安全.娱乐性面罩和自戴式水下呼吸器潜水面罩透镜
ANSI/ASTM A846-1985 用于脱氧与合金钢的铝碎片规范
ANSI/IPC NC-349-1985 钻床及刻纹机用计算数字控制格式
ANSI B11.11-1985 机床.齿轮切削机床.制造、维护和使用的安全要求
ANSI B24.1-1985 锻压机械的安全要求
ANSI/API Bull13D-1985 石油钻井用液体流变性
ANSI/NAPM IT4.129-1985 摄影(化学药品).盐酸对氨基苯酚
ANSI PH4.15-1985 摄影(冲洗).胶卷和牙科胶片.胶片冲洗夹和吊架的咬合部位的尺寸
ANSI Z356.5-1985 工艺美术材料.涂料和油墨
ANSI PH4.8-1985 摄影用化学药品.胶片、感光板和相纸中的残余硫代硫酸盐及其他化学药剂的测定和测量.86年12月修改
ANSI PH2.44-1985 摄影(感光测定).微泡缩微胶卷.测定感光速度和平均梯度的方法
ANSI PH1.58-1985 摄影(相纸).工程用复印页纸和卷纸的尺寸
ANSI/ASTM D1298-1985 原油和液化石油产品的密度、比重或API重力(比重计法).(05.01,10.03)试验方法
ANSI/ASTM D1093-1985 蒸馏残余物或烃液的酸性的试验方法
ANSI/ASTM D4530-1985 石油产品残留微粒碳的测试方法
ANSI/ASTM D4484-1985 用选择离心分离法对船用剩余燃油中无机粒子的试验方法
ANSI/ASTM D2272-1985 用转式储气瓶测定蒸气涡轮机油氧化稳定性的连续性的试验方法(05.01)
ANSI/SAE J1523-1985 汽车用胶粘剂的金属与金属搭接剪切强度的测试
ANSI/SAE J1524-1985 汽车密封与隔音用胶粘剂的粘度试验方法
ANSI/ASTM D4357-1985 粗纱和线纱玻璃织物制塑料层压制品规格
ANSI/ASTM D2292-1985 苯乙烯-丁二烯模塑挤塑材料.压缩模制试样的实施规程(08.02)
ANSI K62.1-1985 防治农作物病虫害化学药品俗名的认可程序
ANSI/INCITS/ISO/IEC 8879-1986 信息处理.文本和办公系统.标准通用置标语言
ANSI/IEEE C57.117-1986 公用电力系统的电力变压器和并联电抗器失效数据报告指南
ANSI A117.1-1986 房屋建筑及设施.适合于残疾人进入和使用的建筑物
ANSI/ADA Specification43-1986 电动牙科混汞器
ANSI S1.42-1986 声学测量加权网络的设计响应
ANSI/INCITS/ISO/IEC 7487-3-1986 信息处理.用7958ftprad、1.9tpmm(48tpi)双面改进的调频记录在130mm(5.25英寸)盒式软盘上的数据交换.第3部分:磁道格式B
ANSI/INCITS/ISO 2382-22-1986 信息处理系统.词汇.第22部分:计算器
ANSI/INCITS/ISO 8378-3-1986 信息处理.数据交换用130mm(5.25 in)改进调频制记录、密度为7958 ftprad、3.8 tpmm(96 tpi)的双面软磁盘.第3部分:磁道格式B
ANSI C119.1-1986 电连接器.额定电压为600伏的密封绝缘式地下连接器系统
ANSI Z21.56-1986 燃气的游泳池加热器
ANSI Z21.22-1986 热水供给系统的安全阀和燃气自动关闭装置
ANSI/ASTM F1030-1986 阀门操作人员的实施规程
ANSI/ASTM F992-1986 阀门标识牌规范
ANSI/ASTM F994-1986 外排水船身渗透连接件的设计与安装规范
ANSI/ASTM F1020-1986 船设备用暗线阀门的实施规程
ANSI/ASTM F993-1986 阀门锁紧装置规范
ANSI/ASHRAE 58-1986 定评室内空调器和组装式终端空调器加热能力的试验方法
ANSI/ADA 54-1986 牙科用双点,注射药物用一次性针管
ANSI/ASME B18.3.6M-1986 米制系列六角凹头制动螺钉
ANSI/ASME B18.3.5M-1986 米制系列六角扁平沉头螺钉
ANSI/ASME B18.3.4M-1986 米制系列内六角圆头螺钉
ANSI/ASME B18.3.3M-1986 米制系列内六角轴肩螺钉
ANSI/ASME B18.3.1M-1986 米制系列内六角螺钉
ANSI/ADA 37-1986 牙科用研磨粉
ANSI/ASHRAE 94.3-1986 有效的灵敏蓄热装置的以热性能为基础的试验方法
ANSI/AWS D10.4-1986 焊接奥氏体铬镍不锈钢管推荐惯例
ANSI ISO 7487-3-1986 信息处理.数据交换用130mm(5.25英寸)改进调频制记录,密度为7958 ftprad、1.9 tpmm(48 tpi)的双面软磁盘.第3部分:INCITS采纳的磁道格式B
ANSI ISO 8879-1986 信息处理.文本和办公系统.INCITS采纳的标准通用置标语言(SGML)
ANSI ISO 2382-22-1986 信息处理系统.词表.第22部分:计算器系统
ANSI ISO 1860-1986 信息系统.INCITS采纳的交换仪表装置应用程序中的磁带用精密绕线轮
ANSI ISO 5138-7-1986 办公机械.词表.第05节:INCITS采纳的自动邮资盖印机
ANSI INCITS 149-1986 金融服务.金融交易卡形式设置.印花信息的定位 代替ANSI X3.149-186
ANSI INCITS 145-1986 信息系统.编码.水文单元的识别 代替ANSI X3.145-1986
ANSI INCITS 61-1986 信息系统.信息交换用地理位置点表示法 代替X3.61-1986 [被代替:ANSI X3.61,ANSI X3.61]
ANSI INCITS 56-1986 信息系统.信息交换用记录磁带盒.4道,0.250 Inch(6.30 mm),1600 bpi(63 bpmm),相位编码 代替X3.56-1986 [被代替:ANSI X3.56,ANSI X3.5
ANSI INCITS 54-1986 信息系统.信息交换用记录磁带.(6250 CPI,群码记录) 原为ANSI X3.54-1986 [被代替:ANSI X3.54,ANSI X3.54]
ANSI INCITS 136-1986 信息系统.信息交换用串行已记录盒式磁带.4道和9道.0.250英寸(6.30mm)8000bpi(315bpmm)的流线模式分组编码记录 代替ANSI X3.136-1986
ANSI INCITS 126-1986 信息系统.7958 bpr用单面或双面的双密度非格式化的5.25英寸(130mm)、96道/英寸(3.8道/毫米)盒式软磁盘.物理和磁性通用要求 代替ANSI X3.126-1986
ANSI INCITS 116-1986 信息系统.信息互换用4道、串行、0.25英寸(6.30mm)、6000 bpi(252bpmm)的可逆改型的调频编码的已记录的盒式磁带 代替ANSI X3.116-1986
ANSI INCITS 111-1986 信息系统.光学字符识别(OCR).OCR-MA用矩阵字符集 代替ANSI X3.111-1986
ANSI INCITS 4-1986 信息系统.编码字符集.信息交换用7位美国国家标准编码(7位ASCII) 以前的ANSI X3.4-1986、FIPS PUB 1-2
ANSI/ASSE 1007-1992 家用洗衣设备的管道设施要求.注:1986-12-12批准
ANSI S1.11-1986 倍频带和分数倍频带模拟及数字滤波器规范
ANSI/INCITS/ISO/IEC 5138-7-1986 办公机器.词汇.第7部分:邮戳机
ANSI/AWS B1.10-1986 焊缝无损检测指南
ANSI/ASME B16.39-1986 锻铁螺纹管活接头
ANSI/ASTM D3522-1986 波纹纸板表面涂蜡和浸蜡的试验方法
ANSI/ASTM D3521-1986 波纹纸板上表面蜡涂层的试验方法
ANSI S3.34-1986 对人体感受传递至手部的振动进行测量和评定的指南
ANSI INCITS 48-1986 PE、32bpmm(800bpi)、3.81mm (0.150英寸)、信息交换用盒式磁带(包括ANSI X3.48/TC-1-1995)(以前为ANSI X3.48-1986 (R1997))
ANSI/IEEE C57.15-1986 阶跃电压调压器的标准要求、术语和测试规程
ANSI/IEEE C57.110-1986 施加非正弦载荷电流时确定变压器能力的推荐实施规程
ANSI/IEEE C57.100-1986 油浸式配电变压器热评定标准试验规程
ANSI/IEEE C37.24-1986 室外金属封闭开关的太阳辐射效果评价指南
ANSI/IEEE C57.98-1986 变压器脉冲试验指南
ANSI/SAE J156-1986 熔断体
ANSI/SAE J47-1986 摩托车的最高声级
ANSI B93.29M-1986 已编入目录的工业用方头液压缸附件的尺寸
ANSI/AWS D10.7-1986 铝和铝合金管气体保护电弧焊推荐惯例
ANSI/SAE J911-1986 冷轧薄钢板表面结构的测量
ANSI/SPI B151.21-1986 注射吹模机的结构、保养和使用安全要求
ANSI/ASME PTC19.22-1986 仪器仪表.数字系统技术
ANSI/ASTM F737-1986 冰球运动用冰鞋刀片的性能规范
ANSI/ASTM D2273-1986 润滑油痕量沉积的试验方法(05.01)
ANSI Z4.1-1986 工作场所环境卫生的最低要求
ANSI S12.7-1986 脉冲噪声的测量方法
ANSI IT4.234-1986 摄影用化学药品.十二水磷酸三钠
ANSI/ISO 8378-3-1986 信息处理.利用7958ftprad、3.8tpmm(96tpi)双面改进调频记录在130mm(5.24in)盒式软盘上的数据交换.第3部分:磁道格式B
ANSI/ADA 43-1986 牙科用电动混汞器
ANSI C29.3-1986 湿法瓷绝缘子.圆柱型
ANSI N42.13-1986 放射性核素检测装置用"剂量校准议"电离室的校准和使用
ANSI/ASHRAE 41.1-1986 温度的标准测量法
ANSI/ASME MFC-4M-1986 用涡轮仪测量气体流量
ANSI/PIMA IT4.234-1986 摄影(化学药品).磷酸三钠十二水合物
ANSI X3.39-1986 信息系统.信息互换用已记录的磁带( 相位编码的1600CPI PE)
ANSI X3.50-1986 信息系统.在限定字符集系统中使用的美国( U.S. )常规的SI及其它单位制表示法
ANSI X3.54-1986 信息系统.信息交换用已记录的磁带(6250 CPI群编码记录)
ANSI X3.116-1986 信息系统.信息互换用4道,串行,0.25英寸(6.30mm),6000 BPT(252BPMM)的可逆改型的调频编码的已记录的盒式磁带
ANSI X3.48-1986 信息系统.信息互换用盒式磁带.相位编码的,32bpmm(800bpi),PE,3.81mm(0.15英寸)
ANSI X3.56-1986 信息系统.信息交换用已记录盒式磁带.相位编码的,4道,0.250英寸(6.30mm),1600bpi(63bpmm)
ANSI X3.4-1986 信息系统.代码字符集.信息互换用7位的美国国家标准代码
ANSI X3.61-1986 信息系统.信息互换用地理点位置的表示法
ANSI X3.111-1986 信息系统.光学字符识别(OCR).OCR-MA 矩阵字符集
ANSI X3.126-1986 信息系统.单面或双面的双密度非格式化的5.25英寸(130mm),96道/英寸(3.8道/毫米)盒式软磁盘.物理和磁性通用要求(适用于7958BPR)
ANSI X3.145-1986 信息系统.代码.水文站的标识
ANSI X3.136-1986 信息系统.信息交换用串行已记录盒式磁带.4道和9道.0.250英寸(6.30mm)8000bpi(315bpmm)的流线模式分组编码记录
ANSI/INCITS/ISO 8879-1986 信息处理.文本和办公系统.标准通用置标语言(SGML)
ANSI/INCITS/ISO 7487-3-1986 信息处理.数据交换用130mm(5.25 in)改进调频制记录、密度为7958ftprad、1.9 tpmm(48 tpi)的双面软磁盘.第3部分:磁道格式B
ANSI/ISO 7487-3-1986 信息处理.利用7958ftpard1.9tpmm(48tpi)双面改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第3部分:磁道格式B
ANSI/ISO 8378-2-1986 信息处理.利用13262ftprad1.9tpmm(48tpi)双面改频调制记录在200mm(8in)盒式软盘上的数据交换.第2部分:磁道格式A
ANSI ICST 1-1986 信息系统.指印识别.信息交换的数据格式
ANSI/EIA 236-C-1986 分立半导体器件的彩色编码
ANSI/EIA 455-55A-1986 光纤涂层几何尺寸的测量方法
ANSI/EIA 5150000-1986 光学纤维和光缆接头的一般规范
ANSI/EIA 527-1986 彩色显像管的屏幕定义
ANSI INCITS39-1986 信息交换用可记录磁带(1600 cpi,PE)
ANSI INCITS111-1986 信息系统.光学字符识别(OCR).OCR-M矩阵字符集
ANSI INCITS56-1986 信息交换用已录制盒式磁带(4道、0.250 英寸, 1600 BPI、阶段编码)
ANSI INCITS145-1986 在美国和加勒比海边远地区水文装置的识别代码
ANSI INCITS136-1986 信息交换用、4道和9道、0.250英寸(6.30mm)、8000bpi(315bpmm)的流式组编码记录、连续记录盒式磁带
ANSI INCITS116-1986 信息交换用、4道、串行、0.250英寸(6.30mm)、6400BPI(252BPMM)的可逆修改式调频编码已记录磁带
ANSI INCITS126-1986 单和双面双密度无格式化5.25英寸(130mm)、96TPI(3.8TPMM)盒式软磁盘.7958BPR用一般、物理和磁性要求
ANSI INCITS4-1986 信息系统.编码字符集.信息交换用7位美国国家标准代码(7位ASCII)
ANSI INCITS61-1986 信息交换用地理点位表示
ANSI INCITS54-1986 信息交换用可记录磁带(6250CPI组编码记录)
ANSI X3.149-1986 金融服务.金融交易卡格式.印码信息的位置
ANSI PH2.7-1986 摄影.摄影曝光导则
ANSI INCITS149-1986 金融交易卡格式.印迹信息的位置
ANSI Z80.8-1986 眼科.软质隐形眼镜.处方要求
ANSI/AHAM DH-1-1986 减湿器
ANSI/TIA-455-172-1986 防火墙连接器的阻燃性
ANSI/TIA/EIA 455-172-1986 防火墙连接器的抗火焰性
ANSI/EIA/TIA 455-172-1986 火墙连接器的抗燃性
ANSI/ASHRAE 109-1986 测定含有沸液的平板太阳能收集器的热性能的测试方法
ANSI PH4.2-1986 摄影(冲洗).页片和感光板冲洗罐的规范
ANSI X5.6-1986 办公家俱.面板系统的测试
ANSI/INCITS/ISO 5138-7-1986 办公机器.词汇.第7部分:邮戳机
ANSI/ASTM E328-1986 材料和结构应力松弛测试方法
ANSI PH4.150-1986 摄影用化学药品.十二水硫酸铝钾
ANSI PH4.234-1986 摄影用化学药品.十二水磷酸三钠
ANSI PH4.4-1986 摄影(冲洗).页片和感光板用槽式摄影冲洗吊架的规范
ANSI PH4.126-1986 摄影用化学药品.氢醌
ANSI PH4.202-1986 摄影用化学药品.氯化钾
ANSI PH4.156-1986 摄影用化学药品.无水甲醛合亚硫酸氢钠
ANSI PH4.179-1986 摄影用化学药品.二水合柠檬酸钠
ANSI/NAPM IT4.234-1986 摄影(化学药品).十二水磷酸三钠
ANSI/ASTM D2604-1986 制备耐油防腐剂溶液用的高沸点碳氢溶剂规范
ANSI/ASTM D4634-1986 苯乙烯-马来酐材料规格
ANSI/ASTM D4350-1986 塑料和填料的腐蚀性指数测试方法
ANSI B74.21-1986 陶瓷粘结砂轮疲劳度检验程序
ANSI B212.9-1986 切削工具.可倾斜圆盘锯用的硬质合金坯料
ANSI K62.292-1986 bifenthrin－(杀虫剂和杀螨剂)通用名称
ANSI K62.293-1986 myclobutail－(杀菌剂)通用名称
ANSI K62.294-1986 imazethapyr－(除草剂)通用名称
ANSI K62.295-1986 chlorimuron－(除草剂)通用名称
ANSI K62.286-1986 fluoroglycofen－(除草剂)通用名称
ANSI K62.281-1986 imazapyr－(除草剂)通用名称
ANSI K62.291-1986 fluazifop-P－(除草剂)通用名称
ANSI K62.298-1986 quizalofop－(除草剂)通用名称
ANSI K62.299-1986 azaconazole－(除草剂)通用名称
ANSI K62.290-1986 clofentezine－(杀菌剂)通用名称
ANSI INCITS48-1986 信息系统.信息交换用盒式磁带. 32 BPMM (800 BPI)3.81-mm (0.150-in)磁带.阶段编码
ANSI/INCITS/ISO 8378-2-1986 信息处理.数据交换用200mm(5.25 in)改进调频制记录、密度为13262 ftprad、1.9 tpmm (48 tpi)的双面软磁盘.第2部分:磁道格式A
ANSI/EIA-236-C-1986 分立半导体器件的彩色编码
ANSI/EIA-5150000-1986 光纤和电缆接头的通用规范
ANSI/EIA-527-1986 彩色显象管的荧光屏定义
ANSI/IEEE 991-1986 逻辑线路图
ANSI/EIA 455-95-1986 光纤和光缆的绝对光功率试验
ANSI/IEEE 1084-1986 电子计算机运算术语的数学术语集
ANSI/IEEE 752-1986 音调地址信号系统性能测量方法和测量设备的功能要求
ANSI/EIA 518-1986 磁带录音机检测标准
ANSI/EIA 531-1986 信号和稳压二极管耐热试验方法(正向电压转换方法)
ANSI X9.21-1986 大宗基金传递及有关通知书用词汇和数据元
ANSI 1860-1986 信息处理系统.交换仪表用磁带精密卷盘
ANSI 21M-1986 视频录制.3/4英寸E型螺旋扫描录制
ANSI 3-1986 录象.录象机、放象机的频率特性和工作等级.以15和7.5英寸/秒运行的2英寸磁带上的录音
ANSI X12.2-1986 电子商务数据交换.发货单业务集(810)
ANSI X12.3-1986 电子商务数据交换.数据元词典
ANSI X12.22-1986 电子商务数据交换.数据程序段词典
ANSI X12.1-1986 电子商务数据交换.购货订单业务集(850)
ANSI X12.6-1986 电子商务数据交换.应用控制结构
ANSI X12.7-1986 电子商务数据交换.请求报价业务集(840)
ANSI X12.8-1986 电子商务数据交换.回答报价请求业务集
ANSI X12.9-1986 电子商务数据交换.采购订单认可业务集(855)
ANSI X12.12-1986 电子商务数据交换.收到通知书业务集(861)
ANSI X12.13-1986 电子商务数据交换.价格/销售目录业务集(832)
ANSI X12.14-1986 电子商务数据交换.按发送能力规划进度的业务集(830)
ANSI X12.16-1986 电子商务数据交换.购货单改变要求认可的业务集(856)
ANSI X12.20-1986 电子商务数据交换.功能认可(997)
ANSI X12.15-1986 电子商务数据交换.购货单改变要求的业务集(860)
ANSI X3.43-1986 信息交换用的当地时间表示法
ANSI X3.128-1986 信息交换用83000传输通量/道,外径为130mm(5.118英寸),内径为40mm(1.575英寸)接触式启动/停止存储磁盘
ANSI X3.129-1986 智能外围设备接口的物理水平
ANSI X3.133-1986 数据库语言.NDL
ANSI X9.9-1986 金融机构的报文鉴别(全部)
ANSI X9.19-1986 金融机构的零散报文鉴别
ANSI X9.22-1986 大宗金融服务报文用标准用户电报格式规范
ANSI Z39.44-1986 连续出版物馆藏报告
ANSI Z89.1-1986 工业生产者用防护帽要求
ANSI N14.19-1986 核材料.辐照燃料船运容器的辅助性能
ANSI N14.27-1986 放射性物质的货车载重量.运输公司和运输商对公路运输事故应负的责任及应急反应措施
ANSI/SAE J1283-1986 用于施工、农业和越野机械辅助启动的电气连接器
ANSI B71.8-1986 户外动力设备.扶手动力旋转耕作机具.安全规范
ANSI/IEEE 944-1986 发电站不间断供电的应用和试验的推荐实施规程
ANSI/IEEE 315A-1986 电气和电子图示用图形符号
ANSI/IEEE 928-1986 陆地光电电力系统性能标准
ANSI/IEEE 535-1986 核电站用1E类铅蓄电池组的合格鉴定
ANSI/IEEE 495-1986 故障电路指示器的试验指南
ANSI/IEEE 1-1986 电气设备额定功率时温度极限和电绝缘评定的一般原则
ANSI/IEEE 806-1986 化石燃料动力工厂和相关装置的识别系统的推荐规程
ANSI/IEEE 676-1986 矿物燃料发电站的警报监视和记录系统的应用指南
ANSI/AHAM HD-1-1986 家用电吹风机性能测试方法
ANSI/NEMA OS2-1986 非金属材料制成的出线箱、器件箱、箱盖和箱支架
ANSI/ARI 780-1986 固定用途的磁接触器
ANSI C136.15-1986 道路照明.发光设备中高亮度放电和低压钠灯的现场识别
ANSI/ASHRAE 93-1986 测定太阳能采集器热性能的试验方法
ANSI/ANS 59.1-1986 与核安全有关的轻水反应堆水冷却系统
ANSI/IEEE 415-1986 核发电系统的1E级动力系统的预操作试验程序设计指南
ANSI/ANS 56.6-1986 加压水冷反应堆安全壳通风系统
ANSI N42.16-1986 液体闪烁计数器中用的密封放射性检查源的规范
ANSI/AMCA 330-1986 风扇导管内声功率的实验室测试程序
ANSI/NWWDA I.S.6-1986 木旋转栅门和栅栏门
ANSI/SAE J1307-1986 挖掘机和反铲车用手语
ANSI/ASHRAE 40-1986 降温用温度操作单元空调设备额定值测试方法
ANSI/ASHRAE 45-1986 定评非住宅用的暖空气加热器的测试方法
ANSI/IEEE 422-1986 发电站电缆系统的设计和安装指南
ANSI/AAMA 1402-1986 铝制壁板、拱腹及挑口板的标准规范
ANSI Z124.4-1986 塑料抽水马桶座式便缸和水箱
ANSI S12.4-1986 有关住宅区高能量脉冲声的评价方法
ANSI/ASTM E1123-1986 测试舰船用舱壁加工材料的声传播损耗的试验样品安装规程
ANSI/SAE J1294-1986 船舶点火分电盘
ANSI/ABYC H-22-1986 电气舱底泵系统
ANSI/SAE J1503-1986 空气调节的、加热的和通风的越野自行式工作机械的性能试验
ANSI/SAE J1545-1986 外部面饰、织物和彩色装饰材料色差仪器测量
ANSI/SAE J1454-1986 越野工作机械座垫的动态耐久性测试
ANSI/SAE J1553-1986 汽车纤维增强塑料粘接用胶粘剂的撕裂测试
ANSI/SAE J1529-1986 静态玻璃粘合用汽车密封胶的搭接剪切测试
ANSI/SAE J1518-1986 三点挂接(A型)反铲车的人员保护
ANSI/SAE J1386-1986 驾驶员座位振动测试的农业轮式拖拉机的分类
ANSI/SAE J1235-1986 液压流体动力阀内部渗漏的测量和报告
ANSI/SAE J1318-1986 特许的应急救援、维修和服务车用气体放电警告灯
ANSI/SAE J1227-1986 液压动力零件和系统的洁净度评定
ANSI/EIA 517-1986 汽车音频标准
ANSI/SAE J1493-1986 启动系统供能的保护
ANSI/FCI 79-1-1986 减压器压力额定值检验
ANSI/AAMI ST21-1986 保健设施中环氧乙烷灭菌过程的生物指示剂
ANSI/ADA 64-1986 牙科用探针
ANSI/AFBMA 8.1-1986 米制滚珠轴承和滚柱轴承配件
ANSI/AGMA 6017-E-1986 一次和多次缩减的双箱涡轮和螺旋涡轮的应用和评定
ANSI/ASME B18.6.5M-1986 米制螺纹成形螺钉和螺纹切屑攻丝螺钉
ANSI/AGMA 9002-A-1986 柔性耦合器的镗孔和键槽
ANSI/ASME HST-6M-1986 气动钢索起重机性能标准
ANSI/ASME Y14.18M-1986 工程图纸及相关文献实施规程.光学零件
ANSI B211.1-1986 表面的完整性
ANSI/ASHRAE 17-1986 恒温制冷剂膨胀阀额定容量测试方法
ANSI/SAE J1502-1986 液压诊断联轴器
ANSI/ASHRAE 68-1986 风扇导管内声功率测量程序的实验室测试方法(与ANSI/AMCA 330-86同)
ANSI/SAE J1276-1986 液压零件测试用标准化液体
ANSI/ASME PTC23-1986 大气水冷却设备
ANSI/API RP13J-1986 重盐水试验
ANSI 198-1986 电影胶片(8mm S型).50英尺1型摄像机声音卡式带盘.窗口、压片和胶片位置
ANSI 196M-1986 电影胶片.室内剧场放映用的屏幕亮度和视觉条件
ANSI 199-1986 电影胶片(8mm S型).50英尺1型摄影机声音卡式带盘.压片平直度和摄像机窗口结构
ANSI PH1.56-1986 摄影(胶片).110片盒.胶片曝光和胶片识别槽口的尺寸
ANSI PH4.29-1986 摄影(冲洗).黑白胶卷,感光板和相纸的手工冲洗方法
ANSI 139-1986 电影胶片(35mm).KS的打孔
ANSI 162-1986 电影胶片(8 mm S型).磁条.16mm的胶片被打成8mm S型(1-4
ANSI 163-1986 电影胶片(8 mm S型).磁条.35mm的胶片被打成8mm S型5R的胶片
ANSI 109-1986 电影胶片(16 mm).单边打孔
ANSI 110-1986 电影胶片(16 mm).双边打孔
ANSI 159.1-1986 电影胶片(8 mm S型).1型摄影机盒式磁带、盒式磁带摄影机接口和收片片芯的传动
ANSI 159.2-1986 电影胶片(8 mm S型).1型摄影机盒式磁带孔径、摄影机孔径结构、胶片位置、压片和胶片平直度
ANSI 161-1986 电影胶片(8 mm S型).磁性复制带.磁带
ANSI 169-1986 电影胶片(35mm).被打成8 mm S型2R-1664(1-0)孔的胶片
ANSI 93-1986 电影胶片(35 mm).被打孔的BH
ANSI/IEEE 430-1986 来自架空电力线路和变电站的无线电噪声测量程序
ANSI/SAE J1477-1986 轻型车辆内部声级的测量
ANSI/API RP12N-1986 炉膛火烟消降器的操作、保养和试验
ANSI/ANS 16.1-1986 固化低能级放射性废物的浸析作用的短期测试程序
ANSI/AHAM FM-1-1986 家用电动食物混合器性能测量方法
ANSI/AHAM FB-1-1986 家用电动食物搅拌器性能测量方法
ANSI/AHAM CM-1-1986 家用电咖啡壶性能测量方法
ANSI/AHAM ER-1-1986 家用电气炉灶
ANSI Z80.3-1986 非处方太阳镜和流行眼镜的要求
ANSI Z130.1-1986 高尔夫球车的安全和性能要求
ANSI/ASTM A770/A 770M-1986 专用钢板通过厚度试验抗拉强度规范
ANSI/API RP9B-1986 油田用钢丝绳的应用和管理
ANSI/ISO 7848-1986 有转位刀片的柄式铣刀.名称与符号
ANSI/ISO 7406-1986 有转位刀片的套式铣刀.名称和符号
ANSI/IPC AC-62-1986 接地端子焊料水清洗指南
ANSI B212.6-1986 切削工具.铣刀上可转位(多刃)硬质合金三角形和正方形刀片.规格
ANSI 7848-1986 带有转位刀片的柄式铣刀的名称和牌号
ANSI 7406-1986 带有转位刀片的套式铣刀的名称和牌号
ANSI C80.6-1986 镀锌的中间导管(IMC)
ANSI B212.4-1986 切削工具.可转位刀片.识别系统
ANSI/API RP14C-1986 海上生产平台面上安全系统的分析、设计、安装和试验
ANSI/ASTM D3427-1986 石油的气泡分离时间的试验方法(05.02)
ANSI/NAPM IT4.156-1986 摄影(化学药品).无水甲醛化亚硫酸氢钠
ANSI/NAPM IT4.150-1986 摄影(药液).十二水硫酸铝钾
ANSI PH4.14-1986 摄影(冲洗).黑白胶片和感光板用显影剂.照片粒度的评定方法
ANSI PH4.3-1986 摄影(冲洗).摄影冲洗盘的规范
ANSI 12M-1986 电视.时间和控制代码.525行/60帧电视体系用录音和录象带
ANSI PH1.55-1986 摄影(胶片).110胶片和背纸盒的尺寸
ANSI PH4.151-1986 摄影用化学药品.十二水硫酸铬钾
ANSI 146M-1986 电影胶片.16mm和8mm彩色摄影反转胶片的曝光速度的测定
ANSI PH4.302-1986 摄影用化学药品.铁氰化钾
ANSI PH1.57-1986 摄影(胶片).110胶卷暗盒.尺寸
ANSI/ASTM D613-1986 用十六烷法对柴油机燃料引燃质量的试验方法
ANSI/ASTM D1321-1986 石蜡的针入度.(05.01,15.09)试验方法
ANSI/ASTM D3945-1986 用柴油机喷嘴对含有液体聚合物的剪切应力稳定性的试验方法
ANSI/SAE J1321-1986 II型TMC/SAE混合燃料消耗的测试程序
ANSI/ASTM D2711-1986 测定润滑油的乳化分解性的试验方法(05.02)
ANSI/SAE J1264-1986 (短时间运行车辆)I型RCCC/SAE联合燃料消耗测试程序
ANSI/ASTM D1741-1986 滚珠轴承润滑脂有效期的试验方法(05.01)
ANSI/ASTM D4636-1986 液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性试验方法
ANSI/ASTM D2422-1986 工业用液体润滑剂的粘度系统的实施(05.01)
ANSI/ASTM D2393-1986 环氧树脂和相关成分粘度的试验方法(08.02)
ANSI/ASTM D2271-1986 初步检验液压液(磨损试验)的方法(05.01)
ANSI/ASTM D2602-1986 用冷起动模拟装置测定低温时发动机油的表观粘度的试验方法(05.01)
ANSI/SAE J1440-1986 林业机械的越野轮胎和轮辋分类
ANSI/RMA IP-14-1986 无水液氨软管规格
ANSI/ASTM D3763-1986 用载荷-位移传感器测定塑料的高速刺穿特性的试验方法(08.03)
ANSI/ASTM D3349-1986 碳黑加色乙烯塑料薄膜的吸收系数的试验方法(08.03)
ANSI/SAE J1273-1986 软管和软管组件的选择、安装和维修
ANSI/ASTM D1601-1986 乙烯聚合物的稀释溶液粘度的试验方法(08.02)
ANSI/ASTM D2924-1986 增强热固性树脂管的耐外压力试验(08.04)
ANSI/ASTM D2566-1986 在固化期间热固化铸模树脂的线性收缩的试验方法(08.02)
ANSI B28.10-1986 橡胶机械.循环带式建筑机械.制造,安装,操作和保养的安全要求
ANSI B151.21-1986 塑料机械.喷注模压机.制造,维护和使用的安全要求
ANSI/CRSI A48.2-1986 混凝土结构.两向混凝土的接头建造
ANSI/CRSI A48.1-1986 单向混凝土的接头建造
ANSI/CRSI A38.1-1986 圆形钢筋混凝土柱的钢螺旋
ANSI A38.1-1986 混凝土结构.圆钢筋混凝土螺旋型支柱
ANSI A48.1-1986 混凝土结构.单向混凝土工字梁结构形式
ANSI A48.2-1986 混凝土结构.双向混凝土工字梁结构形式
ANSI/IEEE C37.82-1987 核电站中1E级设施用开关装置组件的合格鉴定标准
ANSI/ASTM F1120-1987 管道设备用环形金属波纹膨胀连接件的规格
ANSI/ASTM F1057-1987 利用热循环技术估计压塑聚乙烯(PVC)管道质量惯例
ANSI/ASME B18.18.3M-1987 特殊用途紧固件的质量保证和检验
ANSI/ASME B18.18.4M-1987 高度专业化工程应用的紧固件的质量保证和检验
ANSI Z21.1-1987 家庭烹调用燃气器具
ANSI/INCITS/ISO/IEC 8860-2-1987 信息处理.用7958ftprad每面80磁道、改进的调频记录在90mm(3.5英寸)盒式软盘上的数据交换.第2部分:磁道格式
ANSI/INCITS/ISO/IEC 8630-2-1987 信息处理.用13262ftprad每面80磁道、改进的调频记录在130mm(5.25英寸)盒式软盘上的数据交换.第2部分:77磁道用磁道格式A
ANSI/INCITS/ISO 9036-1987 信息处理.信息交换用7位编码阿拉伯字符集
ANSI/INCITS/ISO/IEC 2382-3-1987 信息处理系统.词汇.第3部分:设备技术
ANSI/INCITS/ISO/IEC 8630-3-1987 信息处理.用13262ftprad每面80磁道、改进的调频记录在130mm(5.25英寸)盒式软盘上的数据交换.第3部分:80磁道用磁道格式B
ANSI/ANS 8.12-1987 反应堆外部钚铀混合燃料的核临界控制和安全
ANSI/ASTM F1106-1987 手动拉绳的、正面朝上的卷缆铰盘规范
ANSI/ASTM F1121-1987 船用火灾设备的国际海岸连接方式规范
ANSI/ASTM F1018a-1987 钢制应急齿轮箱规范
ANSI/ASTM F1069-1987 船用单扇防水、防气体/防空气和防风雨门规范
ANSI/ASTM F1070-1987 船用非锁闭门规范
ANSI/AWS D10.11-1987 无背衬管道根部焊道焊接
ANSI/ASTM F1098-1987 蝶阀-NPS 2 到 24包封尺寸的规范
ANSI/ASTM F1123-1987 非金属膨胀管连接件的规范
ANSI S12.11-1987 由小型空气推动装置发出的噪声的测量方法
ANSI/ISA RP12.13 Part II-1987 可燃气体检测工具的安装、操作和维修
ANSI/IEEE C62.35-1987 雪崩接合半导体电涌保护装置标准试验规范
ANSI/AIIM MS40-1987 缩微胶片.计算机辅助检索(CAR)接口命令
ANSI S2.60-1987 平衡机.外壳和其他安全措施
ANSI/ABMA 19.1-1987 米制设计的径向锥形滚柱轴承
ANSI/ABMA 13-1987 滚动轴承的振动和噪音(测量方法)
ANSI/ASME B18.2.2-1987 英制系列四角和六角螺母
ANSI/ANS 6.3.1-1987 轻水反应堆(LWR)中辐射屏蔽的测试用程序
ANSI ISO 8859-7-1987 信息处理.8位单字节编码图形字符集.第7部分:INCITS采纳的拉丁/希腊字母
ANSI ISO 8630-3-1987 信息处理.数据交换用130mm(5.25 英寸)改进调频制记录,密度为13262 ftrad、每面80道的软盘.第3部分:INCITS采纳的用作80道的磁道格式B
ANSI ISO 8630-2-1987 信息处理.数据交换用130mm(5.25 英寸)改进调频制记录,密度为13262 ftrad、每面80道的软盘.第2部分:INCITS采纳的用作77道的磁道格式A
ANSI ISO 8484-1987 INCITS采纳的存折本的磁条
ANSI ISO 8372-1987 信息处理.INCITS采纳的64-bit分组密码算法的操作模式
ANSI ISO 9036-1987 信息处理.INCITS采纳的信息交换用的7位编码阿拉伯字符集
ANSI ISO 8860-2-1987 信息处理.数据交换用90mm(3.5英寸)改进调频记录的密度为7958 ftprad、每面80道软磁盘.第2部分:INCITS采纳的磁道格式
ANSI ISO 2382-4-1987 信息处理系统.词表.第04部分:数据系统组织
ANSI ISO 2382-3-1987 信息处理系统.词表.第03部分:设备技术系统
ANSI INCITS 158-1987 信息系统.信息交换用记录盒式磁带.4磁道、0.150英寸(3.81 mm),8000 bpi(315 bpmm)群码记录 代替ANSI X3.158-1987
ANSI INCITS 157-1987 信息系统.信息交换用3200 cpi(126 cpmm)相位编码记录磁带 代替ANSI X3.157-1987
ANSI INCITS 139-1987 信息系统.光纤分布式数据接口(FDDI).令牌环介质访问控制(MAC) 代替ANSI X3.139-1987
ANSI INCITS 62-1987 信息技术.光学字符识别(OCR).OCR系统用纸.修改件1-1999年5月24日;代替X3.62 [被代替:ANSI X3.62,ANSI X3.62,ANSI X3.62]
ANSI INCITS 74-1987 信息系统.程序设计语言.PL/I通用子集 代替X3.74 [被代替:ANSI X3.74,ANSI X3.74,ANSI X3.74]
ANSI INCITS 27-1987 信息系统.用于信息交换的磁带盒文档结构和标签 代替ANSI X3.27-1987
ANSI/ISO 7943.2-1987 视听系统.高射投影仪.幻灯片和幻灯片框架(尺寸).注:ANSI/ISO 7943.2-1987和ANSI IT7.212-1989的再确认和重新编制
ANSI/ISO 7943.3-1987 视听系统.高射投影仪.片卷、片芯和卷绕机.(尺寸).注:ANSI/ISO 7943.3-1987和ANSI IT7.217-1989的再确认和重新编制
ANSI/NEMA RE2-1987 电绝缘清漆
ANSI INCITS 152-1987 办公室设备和消耗品.非碳化单层计算机用纸卷.规范 代替ANSI X3.151-1987
ANSI INCITS 151-1987 办公设备及消耗品.商用设备、数据处理设备和商用帐票.字符和行距 代替ANSI X3.151-1987
ANSI INCITS 150-1987 办公设备及消耗品.商用设备、数据处理设备和商用帐票.字符和行距 代替ANSI X3.150-1987
ANSI INCITS 113-1987 信息系统.程序设计语言.全Basic语言 代替ANSI X3.113-1987的1989年补充件A
ANSI INCITS 127-1987 信息系统.信息互换用0.250英寸(6.30mm)、6400-10000ftpi(252-394tpmm)未记录的盒式磁带 代替ANSI X3.127-1987
ANSI/AIIM MS11-1987 图像管理信息.缩微胶片盒
ANSI/EIA 520AAOO-1987 质量认证的专用按钮开关空白详细规范.注:1987-09-25批准
ANSI/EIA 520DOOO-1987 质量认证的扳钮、闸板和摇臂开关分规范.注:1987-04-15批准
ANSI/ASME PTC19.2-1987 压力测量仪器和仪表.第2部分
ANSI/ASTM F1122-1987 快速拆卸式联轴节的规范
ANSI B93.77M-1987 液压气动缸传动安装阀安装表面的标准尺寸
ANSI B93.95M-1987 液压气动用容积式泵、马达、整体传输.稳态性能的测量
ANSI B93.98M-1987 液压用旋转轴凸缘密封圈的公称尺寸和公差
ANSI IT4.185-1987 摄影(化学制品).乙二胺四乙酸(EDTA)及其盐类
ANSI/IEEE C37.105-1987 核电站用的1E防护继电器和附件的合格鉴定标准
ANSI/IEEE C37.98-1987 继电器的测震检验
ANSI C57.12.55-1987 变压器.包括成套变电所在内的成套设备用干式变压器.一致性标准
ANSI/ASME B1.12-1987 螺纹.五级干涉配合.配合螺纹
ANSI C63.2-1987 10kHz至40GHz的电磁噪声和场强测量仪.规范
ANSI/ASME A112.19.3M-1987 不锈钢卫生设备(家庭专用型)
ANSI/ASME B18.18.2M-1987 大型机器组装用紧固件的质量保证和检验
ANSI INCITS151-1987 胶接纸和索引光泽纸板.通用纸张规格
ANSI/IEEE C37.27-1987 低压交流非整体熔断电源断路器(使用单独安装的限流熔断器)的应用指南
ANSI A10.15-1987 修建和拆除时挖泥作业的安全要求
ANSI/ASTM D2884-1987 用针入度法测定非均质推进剂的屈服应力用试验方法
ANSI/ASTM D2532-1987 在低温静止后飞机涡轮润滑剂的粘度和粘度变化的试验方法(05.01)
ANSI/ASTM D1833-1987 石蜡气味的试验方法
ANSI/ASTM D3429-1987 低沸点液体中固定气体可溶性的试验方法
ANSI/ASTM D2161-1987 运动粘度对赛波特通用粘度或赛波特重油粘度转换的试验方法(05.01,10.03)
ANSI/INCITS/ISO/IEC 2382-4-1987 信息处理系统.词汇.第4部分:数据的组织
ANSI/IEEE C37.23-1987 金属铠装总线和隔离相总线损失计算指南
ANSI/SAE J2194-1987 轮式农业拖拉机的翻滚保护结构(ROPS)
ANSI/IEEE C62.92-1987 电子功效系统中性接地应用指南.第一部分.介绍
ANSI/IEEE C37.93-1987 电话信道上音调的电源系统保护继电器应用指南
ANSI/IEEE C37.20.3-1987 金属壳断路器开关设备
ANSI/IEEE C37.106-1987 发电厂不规则频率保护指南
ANSI/SAE J567-1987 灯泡固定系统
ANSI/SAE J684-1987 汽车型挂车联接器、牵引装置和安全链
ANSI/SAE J1829-1987 汽车燃料的化学计算空气/燃料比
ANSI/SAE J1169-1987 静态条件下轻型车辆排气声级的测量
ANSI/SAE J1131-1987 汽车空气制动系统中使用的SAE J844d非金属管件和连接组件的性能要求
ANSI/SAE J377-1987 车辆喇叭的性能
ANSI/ARI 750-1987 制冷剂恒温膨胀阀
ANSI/SAE J661-1987 闸衬片质量控制试验程序
ANSI/SAE J636-1987 三角皮带及皮带轮
ANSI C63.12-1987 电磁兼容性限值.推荐标准
ANSI/ASTM D4682-1987 测定二冲程汽油发动机润滑油与汽油的混溶性和流动性的规范
ANSI INCITS158-1987 信息系统.信息交换用已记录盒式磁带.4道、0.150英寸(3.81 mm)、8000bpi(315 bpmm)群码记录
ANSI INCITS157-1987 信息系统.信息交换用已记录磁带.3200cpi(126 CPMM).相位编码
ANSI INCITS113-1987 信息系统.程序设计语言.全BASIC语言
ANSI INCITS27-1987 信息交换用磁带的标签和文件结构
ANSI/ANS 10.4-1987 核工业科研和工程用计算机程序验证和确认导则
ANSI/ASTM D127-1987 石油蜡(包括石油)滴落熔点的测试方法
ANSI C12.6-1987 测量用移相装置的端子的标记和设置
ANSI B74.8-1987 用球磨机试验磨料颗粒易脆性的推荐实施规程
ANSI/NAPM IT4.186-1987 摄影(化学药品).硫酸羟胺
ANSI/I3A IT4.185-1987 摄影(药液).乙二胺四乙酸(EDTA)及其盐
ANSI INCITS 91M-1987 信号系统.存储器模块接口(以前为ANSI X3.91M-1987 (R1997))
ANSI/IPC RF-245-1987 刚性挠性印制电路板性能规范
ANSI/IPC FC-250A-1987 单面和双面挠性印制线路规范
ANSI S3.37-1987 耳廓后助听器的优选耳部吊钩波导口螺纹
ANSI/INCITS/ISO/IEC 8484-1987 存折本的磁条
ANSI/ADA 6-1987 牙科用汞
ANSI/ASTM F431-1987 真空吸尘器性能测量压力通风室规范
ANSI C136.21-1987 道路照明.灯杆顶置照明设备使用的垂直榫接照明设备
ANSI/ANS 6.6.1-1987 LWR核电站直接的和散射的伽马辐射的计算和测量
ANSI/AFBMA 19.1-1987 径向锥形滚柱轴承,米制
ANSI/ASME MFC-7M-1987 利用临界文氏流量喷嘴测量气体流量
ANSI S3.39-1987 测量听觉声阻抗及导纳(听觉声导抗)仪器规范
ANSI/ASTM D1832-1987 石蜡的过氧化值的试验方法(05.01,15.09)
ANSI/PIMA IT4.185-1987 摄影(化学药品).乙二胺四乙酸及其盐
ANSI S3.13-1987 骨质振动测量仪的机械耦合器
ANSI/IEEE 1014-1987 通用底板总线:VME总线
ANSI X3.113-1987 信息系统.程序设计语言.全BASIC语言的模块和单个字符输入(ANSI X3.113A-1987的补充件)
ANSI X3.27-1987 信息系统.信息互换用磁带的文件结构与标注
ANSI X3.91M-1987 信号系统.存储器模块接口
ANSI X3.158-1987 信息系统.信息交换用已记录盒式磁带.4道,0.150英寸(3.81mm),8000bpi(315bpmm),群码记录
ANSI X3.127-1987 信息系统.0.250英寸(6.30mm),6400-10000ftpi(252-394tpmm)信息互换用的未记录的盒式磁带
ANSI X3.150-1987 办公用机器和供应品.商用机器、数据处理设备和商务表格.字符和行间距
ANSI X3.151-1987 办公用机器和供应品.胶接纸和索引细料纸板.通用页纸规格
ANSI X3.152-1987 办公用机器和供应品.非碳化,单层加法器纸卷的规范
ANSI X3.157-1987 信息系统.3200CPI(126CPMM)相位编码的信息交换用已记录磁带
ANSI X3.139-1987 信息系统.光纤分布数据接口(FDDI).权标环媒体访问控制(MAC)
ANSI/INCITS/ISO 8630-2-1987 信息处理.数据交换用130mm(5.25 in)改进调频制记录、密度为13262 ftrad、每面80道的软盘.第2部分:用作77道的磁道格式A
ANSI/INCITS/ISO 8630-3-1987 信息处理.数据交换用130mm(5.25 in)改进调频制记录、密度为13262 ftrad、每面80道的软盘.第3部分:用作80道的磁道格式B
ANSI/INCITS/ISO 8860-2-1987 信息处理.数据交换用90mm(3.5 in)改进调频记录的密度为7958 ftprad、每面80道软磁盘.第2部分:磁道格式
ANSI/INCITS/ISO 2382-4-1987 信息处理系统.词汇.第4部分:数据组织
ANSI/INCITS/ISO 2382-3-1987 信息处理系统.词汇.第3部分:设备技术
ANSI/ISO 8630-2-1987 信息处理.利用13262ftprad每面80磁道的改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第2部分:77道的磁道格式A
ANSI/ISO 8630-3-1987 信息处理.利用13262ftprad每面80磁道的改频调制记录在130mm(5.25in)盒式软盘上的数据交换.第3部分:80道的磁道格式B
ANSI/ISO 8860-2-1987 信息处理.利用7958ftprad每面80磁道的改频调制记录在90mm(3.5in)盒式软盘上的数据交换.第2部分:磁道格式
ANSI/ISO 7816-1-1987 识别卡.带触点的集成电路.第1部分:物理特性
ANSI/EIA 321-C-1987 半导体器件同名终端功能的编号和多单元半导体器件的单元名称
ANSI/EIA 455-36A-1987 光纤连接装置扭绞测试
ANSI/EIA 455-171-1987 短长度多模分级指数光纤和单膜光纤组件用代换测量法的衰减试验
ANSI/EIA 508-1987 电视广播发射机电气性能标准
ANSI INCITS150-1987 商务机、数据处理设备和商务表格.字符和行间距
ANSI INCITS127-1987 信息系统.信息交换用、0.250英寸(6.30mm)、6400-10000ftpi(252-394ftpmm)未记录的盒式磁带
ANSI INCITS139-1987 信息系统.光纤分布式数据接口(FDDI).令牌环媒体访问控制(MAC)
ANSI INCITS62-1987 信息系统.光学字符识别(OCR).OCR系统中使用的纸张
ANSI INCITS74-1987 信息系统.程序设计语言.PL/I通用子集
ANSI X3.74-1987 信息系统盘.程序编制语言.PL/I通用子集
ANSI/INCITS/ISO 8484-1987 存折本的磁条
ANSI/EIA 515B000-1987 气密架空、埋设、地下光缆接线盒的分规范
ANSI/EIA 520C000-1987 分规范 ：已质量认证的灵敏开关
ANSI/ASTM F1018-1987 钢制应急齿轮装载集装箱规范
ANSI PH3.200-1987 摄影(暗室设备).接触式印相器和印相框.规范
ANSI X3.62-1987 信息系统.光学字符识别(OCR)系统中用的纸张
ANSI INCITS152-1987 非碳化单层加法机纸卷规范
ANSI/ASME B94.9-1987 切削和研磨螺纹丝锥
ANSI/ASME B94.18.1-1987 基本球锁紧轻型和重型冲头(米制)
ANSI/ASTM D4667-1987 测定聚氨酯异氰酸盐原料酸性的方法
ANSI/API RP11S 1-1987 电动潜水泵拆卸报告
ANSI PH2.34-1987 航空摄影用黑白胶片ISO感光度和平均梯度的测定方法
ANSI PH4.229-1987 摄影用化学药品.无水碳酸钾和倍半水碳酸钾
ANSI PH4.185-1987 摄影用化学药品.乙二胺四醋酸及其盐类
ANSI PH4.186-1987 摄影用化学药品.硫酸羟胺
ANSI PH4.304-1987 摄影用化学药品.十水亚铁氰化钠
SAE AMS5659 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu,
SAE AMS5640 Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 18Cr - 9.0Ni, Free Machining
SAE AMS2416 Plating, Nickel-Cadmium Diffused
SAE AMS5735 Steel Bars, Forgings, Tubing, And Rings, Corrosion And Heatresistant 15cr - 26ni - 1.3mo - 2.1ti - 0 (Cancel
SAE AMS4117 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu
SAE AMS5663 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) -
SAE AMS3667 Polytetrafluoroethylene (PTFE) Sheet, Molded, General Purpose Grade, As Sintered
SAE AMS3660 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3651 Polytetrafluoroethylene (Cancelled Apr 1987, Superseded by AMS3667, AMS3660, AMS3656, AMS3652)
SAE AMS3652 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AMS3656 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS4116 Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Solution He
SAE AMS5713 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS2425 Plating, Gold for Thermal Control
SAE AMS2422 Plating, Gold
SAE AMS2301 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
SAE AMS5731 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti
SAE AMS4122 Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075
SAE AMS4115 Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings, Annealed, 1.0Mg - 0.60Si
SAE AMS4082 Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation
SAE AMS2472 Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Dyed Coating
SAE AMS4161 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), Solution Heat Treated and Naturally
SAE AMS3659 Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved
SAE AMS2469 Hard Anodic Coating on Aluminum and Aluminum Alloys
SAE AMS5687 Nickel Alloy, Corrosion and Heat-Resistant, Wire, 74Ni - 15.5Cr - 8.0Fe, Annealed
SAE AMS5707 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0T
SAE AMS5706 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0T
SAE AMS4114 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), as Fabricated
SAE AMS4080 Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed
SAE AMS3658 Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically In
SAE AMS3065 Compound, Corrosion Preventive Thin Film, Fingerprint Removing
SAE AS870 Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard For
SAE AMS5613 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12.5Cr (SAE 51410), Annealed
SAE ARP917 Stowage of Flight Crew's Survival Emergency, and Miscellaneous Equipment
SAE AMS7851 Columbium (Niobium) Alloy Foil, Sheet, Strip and Plate, 10W - 2.5Zr Recrystallized
SAE AMS7855 Columbium (Niobium) Alloy Bars, Rods, and Wire 10W - 2.5Zr Recrystallized
SAE AMS7716 Sheet and Strip, Flat-Rolled, Electrical, Grain-Oriented, 3.15Si, Type 27G053, Type 30G058, or Type 35G066,
SAE AMS7493 Rings, Flash Welded, Ferritic and Martensitic Corrosion-Resistant Steels
SAE AMS7496 Rings, Flash Welded, Carbon and Low-Alloy Steels
SAE AMS7488 Rings, Flash Welded, Aluminum and Aluminum Alloys
SAE AMS7250 Nuts, Self-Locking Steel, Corrosion and Heat Resistant, High Strength, All-Metal, 1200Mdf Use, Unified (Mil
SAE AMS5746 Alloy Bars and Forgings, Corrosion and Heat Resistant, 15cr 45ni 4.1mo 4.1w 3.0ti 1.0al 31fe, Consumable Ele
SAE AMS5757 Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant, 54ni 19cr 10co 10mo 02.6ti 1.0al 0.006b Vacuu
SAE AMS5755 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Soluti
SAE AMS5736 Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15cr 26ni 1.3mo 2.1ti 0.30v 1800Mdf (9
SAE AMS5734 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006
SAE AMS5733 Steel Bars and Forgings, Corrosion and Heat Resistant 13.5cr 26ni 3mo 1.8ti (Cancelled Jan 1990)
SAE AMS5704 Nickel Alloy, Corrosion and Heat-Resistant, Forgings, 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Z
SAE AMS5712 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS5660 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B
SAE AMS5661 Nickel-Iron Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 42.5ni 12.5cr 5.8mo 2.9ti 0.015b
SAE AMS5392 Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.1Cr - 15Ni - 6.5Cu (2.4 - 2.8C), as Cast
SAE AMS5399 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings, 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al
SAE AMS4160 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed
SAE AMS4127 Aluminum Alloy, Forgings and Rolled Or Forged Rings, (6061-T6) Solution and Precipitation Heat Treated
SAE AMS4146 Aluminum Alloy Forgings and Rolled or Forged Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4), Solution H
SAE AMS4141 Aluminum Alloy Die Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), Solution and Precipitation Heat Trea
SAE AMS4102 Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated (Cancelled Nov 2001)
SAE AMS4065 Aluminum Alloy, Drawn Seamless Tubing, 1.2Mn - 0.12Cu (3003-0), Annealed (Cancelled Jul 2007, Superseded by
SAE AMS4067 Aluminum Alloy, Drawn Round Seamless Tubing, 1.25Mn - 0.12Cu (3003-H14), Strain Hardened (Cancelled Jul 2007
SAE AMS4036 Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Al
SAE AMS4039 Aluminum Alloy Plate, Alclad - 5.6zn - 2.5mg - 1.6cu - 0.26cr (Alclad 7075-T651) (Cancelled Jan 1968)
SAE AMS4038 Aluminum Alloy Plate - 5.6zn - 2.5mg - 1.6cu - 0.26cr (7075-T651) (Cancelled Jan 1968)
SAE AMS4062 Aluminum Alloy, Drawn Seamless Round Tubing, (1100-H14), Strain Hardened (Cancelled Jul 2007, Superseded by
SAE AMS4051 Aluminum Alloy, Sheet and Plate, Alclad, 6.8Zn - 2.8Mg - 2.0Cu - 0.23Cr (Alclad 7178-0), Annealed (Cancelle
SAE AMS4006 Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-0), Annealed (Cancelled Sep 2007, Superseded by ASTM
SAE AMS4003 Aluminum Alloy, Sheet and Plate, 0.12cu (1100-H14), Strain Hardened (Cancelled Apr 2007, Superseded by ASTM
SAE AMS4001 Aluminum Sheet and Plate, 0.12Cu (1100-0), Annealed (Cancelled Jul 2007)
SAE AMS3661 Polytetrafluoroethylene (PTFE) Film, Premium Grade
SAE AMS3662 Polytetrafluoroethylene Film, General Purpose Grade
SAE AMS3657 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS2755 Nitriding, Molten Salt Bath (Cancelled Jul 2009)
SAE AMS2419 Plating, Cadmium-Titanium
SAE AMS2409 Plating, Immersion Tin for Aluminum Alloys
SAE AMS5662 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.
SAE AS1008 Fitting, Elbow, 90 Degree, Standard and Reducer, Bulkhead, Flareless
SAE AS1007 Fitting, Union, Standard and Reducer, Bulkhead, Flareless
SAE AS1010 Fitting, Elbow, 45 Degree, Standard and Reducer, Bulkhead, Flareless
SAE AS1009 Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless
SAE AS1002 Fitting, Tee, Standard and Reducer, Bulkhead and Internal Port on Run, Flareless
SAE AS1001 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless
SAE AS1004 Fitting, Elbow, 90 Degree, Standard and Reducer, Flareless
SAE AS1003 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless
SAE AMS4772 Silver Alloy, Brazing Filler Metal, 54Ag - 40Cu - 5.0Zn - 1.0Ni, 1325 to 1575 掳F (718 to 857 掳C) Solidus-Liq
SAE AIR512 Aircraft Cabin Illumination
SAE AS123751 Cotterpin - Corrosion Resistant
SAE AS1043 Safety Wire Holes, Hex, Fitting, Location of Design Standard
SAE AS919 Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts
SAE AS793 Total Temperature Measuring Instruments (Turbine Powered Subsonic Aircraft)
SAE AS428 Exhaust Gas Temperature Instruments (NONCURRENT Nov 1996)
SAE AIR913 Rocket Ignition and Related Nomenclature
SAE ARP868 Method - Pressure Drop Tests for Fuel System Components
SAE AS916 Oxygen Flow Indicators
SAE ARP743 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Particle
SAE ARP699 High Temperature Pneumatic Duct Systems for Aircraft
SAE AIR923 Method for Calculating Attenuation of Aircraft Ground to Ground Noise Propagation During Takeoff and Landing
SAE AMS2417 Plating, Zinc-Nickel Alloy
SAE AMS2430 Shot Peening, Automatic
SAE AMS2470 Anodic Treatment of Aluminum Alloys, Chromic Acid Process
SAE AMS5832 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50A
SAE AMS5659 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu,
SAE AMS5643 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
SAE ARP823 Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products
SAE AMS3628 Plastic Extrusions and Moldings, Polycarbonate, General Purpose
SAE AMS3611 Plastic Sheet, Polycarbonate, General Purpose
SAE AMS5590 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0
SAE AMS2474 Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating (NONCURRENT)
SAE AMS5713 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS2411 Plating, Silver, for High Temperature Applications
SAE AMS5536 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W -
SAE AMS2241 Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE AMS4123 Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
SAE AMS2480 Phosphate Treatment, Paint Base
SAE AMS2400 Plating, Cadmium
SAE AMS4153 Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treate
SAE AMS2816 Identification Welding Wire, Tab Marking Method
SAE AMS4080 Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed
SAE AMS5383 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti
SAE AMS2360 Room Temperature Tensile Properties of Castings
SAE AMS5589 Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0
SAE AMS5548 Steel, Corrosion and Heat-Resistant, Sheet and Strip, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, 1850 to 1975 掳F (1010
SAE AMS3632 Tubing, Plastic, Electrical Insulation, Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable, 2 t
SAE AS814 Spark Igniter Outline - .750-20 Threaded Mounting
SAE AS453 Spark Igniter Gasket Flange
SAE ARP914 Glossary of Electrical Connection Terms
SAE AMS7897 Tungsten Forgings, Pressed, Sintered, and Forged (Cancelled Jul 2002)
SAE AMS7325 Rings, Sealing, Tubular Metal, Corrosion and Heat Resistant Steel (Cancelled Oct 1993)
SAE AMS7271 Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 - 70
SAE AMS7290 Decalcomanias (Cancelled Jun 2009)
SAE AMS7233 Rivets, Solid, Alloy-Corrosion Resistant, 67ni 31cu (Cancelled Jan 1991)
SAE AMS7205 Spring Pins, Tubular, Carbon Steel (Cancelled Feb 2008, Superseded by AS7205)
SAE AMS7207 Pins, Spring, Tubular-Corrosion and Moderate Heat Resistant Steel (Ams 5506) (Cancelled Oct 1993)
SAE AMS5722 Steel Bars, Forgings and Rings, Corrosion and Heat Resistant 19.5cr 9.5ni 1.4mo 1.4w 0.42(Cb + Ta) 0.22ti (C
SAE AMS5712 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -
SAE AMS5587 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe,
SAE AMS5588 Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe, S
SAE AMS5393 Alloy Iron Castings, Sand, Moderate Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 2.8C), Stress Relieved
SAE AMS4156 Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated
SAE AMS4110 Aluminum Alloy, Bars and Rods, Rolled Or Cold Finished 4.0cu 0.70mn 0.50mg Stress Relief Stretched (Cancelle
SAE AMS4119 Aluminum Alloy, Bars, Rolled Drawn, Or Cold Finished 4.4cu 1.5mg 0.60mn Stress-Relief Stretched (Cancelled J
SAE AMS4059 Sheet and Plate - 4.4mg 0.70mn 0.15cr (Cancelled Feb 1996)
SAE AMS4058 Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-373) (Cancelled Feb 1996)
SAE AMS4057 Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-H323) (Cancelled Feb 1996)
SAE AMS4000 Aluminum Sheet and Plate (1060-0) (NONCURRENT)
SAE AMS3639 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shr
SAE AMS3636 Tubing, Plastic, Electrical Insulation, Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable, 2 to 1
SAE AMS3637 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Flexible, Heat Shrinkable, 2 to 1 Shrin
SAE AMS3159 Leak Test Solution, Liquid Oxygen Compatible (NONCURRENT)
SAE AMS3136 Coating Material, Phenolic Resin, Ptfe Filled Pigmented, 150Mdc (302Mdf) Cure
SAE AMS3135 Coating Material, Silicone Resin, 400 掳F (205 掳C) (Cancelled Jun 2009)
SAE AMS3132 Varnish, Phenolic Resin, Corrosion-Preventive (Cancelled Jun 2009)
SAE AMS3075 Compound, Corrosion-Preventive Hard Film, Hot Application
SAE AMS2815 Identification Welding Wire, Line Code System (Cancelled Oct 2001)
SAE AMS2450 Sprayed Metal Finish, Aluminum (CANCELLED June 2007)
SAE AMS2479 Anodic Treatment of Magnesium Alloys, Acid Type, Thin Coat
SAE AMS2478 Anodic Treatment of Magnesium Alloys, Acid Type, Full Coat
SAE AMS2426 Coating, Cadmium Vacuum Deposition
SAE AMS2413 Plating, Silver-Rhodium
SAE AMS2362 Stress-Rupture Properties of Castings
SAE AMS2361 Elevated Temperature Tensile Properties of Castings
SAE AMS2204 Tolerances, Aluminum Alloy Standard Structural Shapes (Cancelled Aug 1996, Superseded by ANSI H35.2)
SAE AIR944 Pneumatic Ground Power Supplies for Starting Aircraft
SAE AMS6359 Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)
SAE AMS2404 Plating, Electroless Nickel
SAE AMS2402 Plating, Zinc
SAE AMS2249 Chemical Check Analysis Limits, Titanium and Titanium Alloys
SAE AS3040 Installation - Multiple Tube Detachable Cushion Clamp
SAE ARP907 Missile & Rocket Applications: Hose Assemblies, Flexible Metal, High Pressure and High Temperature
SAE ARP953 Stress Dome in Fasteners
SAE AIR737 Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports
SAE AS701 Boss Design for Spark Igniters
SAE ARP813 Maintainability Recommendations for Aircraft Wheels and Brakes
SAE AS803 Igniter, Spark, Aeronautical Engine (Low Tension)
SAE AMS3248 Ethylene Propylene (EPM) Rubber, Phosphate Ester Resistant, 55-65
SAE ARP891 Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurements (Eddy Current) (Reaffirm
SAE ARP836 Design and Safety Criteria for Passenger Boarding Stairways
SAE AMS2415 Plating, Lead and Indium
SAE AS439 Stall Warning Instrument (Turbine Powered Subsonic Aircraft)
SAE AS100007 Gasket-Type XIX Engine Accessory Drive
SAE ARP924 Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments
SAE ARP693 Landing and Taxiing Lights - Design Criteria for Installation
SAE ARP899 Tube Fittings, Fluid Systems, Permanent Type, General Requirements For (Reaffirmed Pending Revision, Sep 88)
SAE AIR978 Diagrams and Characteristics of Typical Piston Engines Magneto Ignition Systems
SAE AMS5610 Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings, 12.5Cr - Low Carbon (SAE 51416, 51416Se), Fre
SAE AMS2491 Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for Bonding
SAE AMS2473 Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
SAE AMS2425 Plating, Gold for Thermal Control
SAE AMS2410 Plating, Silver, Nickel Strike, High Bake
SAE AMS2408 Plating, Tin
SAE AMS5825 Steel, Corrosion Resistant, Welding Wire 16.4cr 4.8ni 0.22cb 3.6cu
SAE AMS5731 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti
SAE AMS4078 Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution H
SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By
SAE AMS4153 Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treate
SAE AMS2355 Quality Assurance, Sampling and Testing, Aluminum Alloys and Magnesium Alloy, Wrought Products (Except Forgi
SAE AMS3668 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS4154 Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Soluti
SAE AMS2481 Phosphate Treatment, Antichafing
SAE AMS5548 Steel, Corrosion and Heat-Resistant, Sheet and Strip, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, 1850 to 1975 掳F (1010
SAE AMS7477 Bolts and Screws-Steel Corrosion and Heat Resistant, Upset Headed, Heat Treated, Roll Threaded Solution and
SAE AMS7478 Bolts and Screws, Steel, Corrosion and Heat Resistant Heat Treated, Roll Threaded, 1800Mdf (982.2Mdc) Soluti
SAE AMS7452 Bolts and Screws Steel, Low-Alloy, Heat Treated, Roll Threaded (Cancelled Jan 1990)
SAE AMS7225 Rivets-Carbon Steel (Cancelled Oct 1993)
SAE AMS7263 Rings, Sealing, Butyl Rubber Phosphate Ester Hydraulic Fluid Resistant 85 95 (Cancelled Oct 1990)
SAE AMS5827 Steel, Corrosion Resistant, Covered Welding Electrodes 16.4cr 4.8ni 0.22cb 3.6cu (Cancelled Sep 2000, Supers
SAE AMS5769 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta
SAE AMS5736 Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15cr 26ni 1.3mo 2.1ti 0.30v 1800Mdf (9
SAE AMS4124 Aluminum Alloy, Rolled Or Cold Finished Bars, Rods, and Wire 5.6zn 2.5mg 1.6cu 0.23cr (7075-T7351), Solution
SAE AMS4077 Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Annealed
SAE AMS3645 Polychlorotrifluoroethylene, Compression Molded-Heavy Sections, Unplasticized
SAE AMS3347 Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55
SAE AMS2666 Silver Brazing High Temperature (Cancelled Jan 1984)
SAE AMS2635 Radiographic Inspection (Cancelled May 1999, Superseded by ASTM E 1742)
SAE AMS2414 Plating, Lead
SAE AMS2407 Plating, Chromium, Porous (NONCURRENT)
SAE AMS5759 Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52Co - 20Cr - 10Ni - 15W
SAE AMS2248 Chemical Check Analysis Limits, Corrosion and Heat-Resistant Steels and Alloys, Maraging and Other Highly-Al
SAE AMS2485 Coating, Black Oxide
SAE AMS2412 Plating, Silver, Copper Strike, Low Bake
SAE AMS2301 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
SAE AS954 Wrenches, Hand, Twelve Point, High Strength, Thin Wall
SAE ARP435 Overspeed Warning Instrument (Turbine Powered Subsonic Aircraft) (NONCURRENT Nov 1996)
SAE ARP997 Passenger Cabin Emergency Equipment Stowage Transport Aircraft
SAE ARP682 Safety Lap Belts (For Civil Transport Aircraft) (Cancelled Aug 2000, Superseded by ARP4101/1)
SAE ARP996 Cooling Data for Turbine Engines in Helicopters
SAE ARP926 Fault/Failure Analysis Procedure
SAE AIR713 Guide for Determining, Presenting, and Substantiating Turbine Engine Starting and Motoring Characteristics
SAE AS972 Spline Details, Accessory Drives and Flanges
SAE AS971 Drive - Accessory, (254) 10.000 Bc Round, Qad, Design Standard For
SAE AS959 Drive - Studded, Accessory, 2.653 Bc Square, Design Standard For
SAE AS961 Drive - Studded, Accessory, 5.000 Bc Square, Design Standard For
SAE AS963 Drive - Studded, Accessory, (127) 5.000 Bc Round, Design Standard For
SAE AS962 Flange - Accessory, 5.000 Bc Square, Design Standard For
SAE AS960 Flange - Accessory, 2.653 Bc Square, Design Standard For
SAE AS965 Drive - Studded, Accessory, (203.2) 8.000 Bc Round, Design Standard For
SAE AS967 Drive - Studded, Accessory, (254) 10.000 Bc Round, Design Standard For
SAE AS966 Flange - Accessory, 8.000 Bc Round, Design Standard For
SAE AS964 Flange - Accessory, 5.000 Bc Round, Design Standard For
SAE ARP767 Impact Protective Design of Occupant Environment Transport Aircraft
SAE ARP582 Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Lighted Instruments
SAE AMS5666 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings, 62Ni - 21.5Cr - 9.0Mo - 3
SAE AMS5662 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.
SAE AMS4120 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat T
SAE AMS4037 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Tre
SAE AMS5596 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb)
SAE ARP982 Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products
SAE AMS5599 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb), So
SAE AMS5663 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) -
SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat
SAE AMS4028 Aluminum Alloy, Sheet and Plate, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg, Annealed (NONCURRENT Aug 2006)
SAE AMS5597 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.
SAE AMS4121 Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), So
SAE AMS4122 Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075
SAE AMS4045 Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate), Solution and
SAE AMS4115 Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings, Annealed, 1.0Mg - 0.60Si
SAE AMS4078 Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution H
SAE AMS2303 Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Pr
SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By
SAE AMS4169 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieve
SAE AMS4168 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieve
SAE AMS4153 Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treate
SAE AMS4048 Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed
SAE AMS2475 Protective Treatments, Magnesium Alloys
SAE AS100007 Gasket - Type XIX Engine Accessory Drive
SAE AMS4114 Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), as Fabricated
SAE AMS4029 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS5516 Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated
SAE AMS4049 Aluminum Alloy, Sheet and Plate, Alclad, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate
SAE AMS4154 Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Soluti
SAE AMS2436 Coating, Aluminum Oxide Detonation Deposition
SAE AMS5548 Steel, Corrosion and Heat-Resistant, Sheet and Strip, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N, 1850 to 1975 掳F (1010
SAE AMS3632 Tubing, Plastic, Electrical Insulation, Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable, 2 t
SAE AS1046 Minimum Standard for Portable Gaseous, Oxygen Equipment
SAE ARP998 Crew Restraint System (Inactive for New Design, Jun 88 by ARP4101/1) (Reaffirmed Inactive for New Design, May
SAE AMS7851 Columbium (Niobium) Alloy Foil, Sheet, Strip and Plate, 10W - 2.5Zr Recrystallized
SAE AMS5804 Steel, Corrosion and Heat Resistant, Welding Wire 15cr 25.5 Ni 1.3mo 2.2ti 0.006b 0.30v
SAE AMS5805 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V, Vacuum In
SAE AMS5717 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W
SAE AMS5664 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90T
SAE AMS5654 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr - 11Ni - 0.60Cb (Nb) (347
SAE AMS5660 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B
SAE AMS5593 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W
SAE AMS5553 Nickel, Sheet and Strip, Low (0.02 max) Carbon, Annealed
SAE AMS5501 Steel, Corrosion Resistant, Sheet, Strip, and Foil, 19Cr - 9.5Ni (304), Cold Rolled, 125 ksi (862 MPa) Tensi
SAE AMS5070 Steel, Bars and Forgings, 0.18 - 0.23C (SAE 1022)
SAE AMS5024 Steel, Bars, Forgings, and Tubing, Free-Cutting, 1.5Mn (0.32 - 0.39C) (SAE 1137) (NONCURRENT Aug 2006)
SAE AMS5020 Steel Bars, Forgings, and Tubing, Free-Cutting, 1.5Mn - 0.25Pb (0.32-0.39C) (11L37) (Cancelled Dec 2008)
SAE AMS5031 Steel, Welding Wire, 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C), Vacuum Melted, Environment Controlled P
SAE AMS4152 Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated
SAE AMS4112 Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished (Cancelled Jan 1996,
SAE AMS4102 Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated (Cancelled Nov 2001)
SAE AMS4124 Aluminum Alloy, Rolled Or Cold Finished Bars, Rods, and Wire 5.6zn 2.5mg 1.6cu 0.23cr (7075-T7351), Solution
SAE AMS4083 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), Soluti
SAE AMS4087 Aluminum Alloy Tubing, Seamless, Drawn, (2024-0), Reinstate Composition Annealed
SAE AMS4077 Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Annealed
SAE AMS4081 Aluminum Alloy, Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Soluti
SAE AMS4065 Aluminum Alloy, Drawn Seamless Tubing, 1.2Mn - 0.12Cu (3003-0), Annealed (Cancelled Jul 2007, Superseded by
SAE AMS4067 Aluminum Alloy, Drawn Round Seamless Tubing, 1.25Mn - 0.12Cu (3003-H14), Strain Hardened (Cancelled Jul 2007
SAE AMS4036 Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Al
SAE AMS4046 Aluminum Alloy, Sheet and Plate, Alclad One Side 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Tr
SAE AMS4040 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-0), Annea
SAE AMS4038 Aluminum Alloy Plate - 5.6zn - 2.5mg - 1.6cu - 0.26cr (7075-T651) (Cancelled Jan 1968)
SAE AMS4039 Aluminum Alloy Plate, Alclad - 5.6zn - 2.5mg - 1.6cu - 0.26cr (Alclad 7075-T651) (Cancelled Jan 1968)
SAE AMS4062 Aluminum Alloy, Drawn Seamless Round Tubing, (1100-H14), Strain Hardened (Cancelled Jul 2007, Superseded by
SAE AMS4014 Aluminum Alloy, Plate 4.5cu 0.85si 0.80mn 0.50mg (Cancelled May 1995, Superseded by AMS4029)
SAE AMS4008 Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-H14) Strain Hardened (Cancelled Oct 2006, Superseded
SAE AMS4034 Aluminum Alloy, Plate, Alclad 4.4cu 1.5mg 0.60m (Cancelled Jan 1968)
SAE AMS4033 Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mn (Cancelled Jan 1968)
SAE AMS4024 Aluminum Alloy Sheet And Plate 4.3zn - 3.3mg - 0.60cu - 0.20mn- 0.17cr (7079- - T6 Sheet, - T651 Pla (Cancel
SAE AMS4006 Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-0), Annealed (Cancelled Sep 2007, Superseded by ASTM
SAE AMS4001 Aluminum Sheet and Plate, 0.12Cu (1100-0), Annealed (Cancelled Jul 2007)
SAE AMS4003 Aluminum Alloy, Sheet and Plate, 0.12cu (1100-H14), Strain Hardened (Cancelled Apr 2007, Superseded by ASTM
SAE AMS4000 Aluminum Sheet and Plate (1060-0) (NONCURRENT)
SAE AMS3638 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat-Shrinkable, 2 to 1
SAE AMS3639 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shr
SAE AMS3634 Tubing, Plastic, Electrical Insulation, Polyolefin, Selectively Crosslinked, Semi-Rigid, Heat Shrinkable
SAE AMS3636 Tubing, Plastic, Electrical Insulation, Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable, 2 to 1
SAE AMS3159 Leak Test Solution, Liquid Oxygen Compatible (NONCURRENT)
SAE AMS3072 Compound, Corrosion Preventive Aircraft Engine
SAE AMS3087 Compound, Insulating And Sealing Silicone (Cancelled Oct 1995)
SAE AMS3002 Alcohol, Denatured Ethyl
SAE AMS3004 Alcohol, Methyl
SAE AMS3006 Alcohol-Water Mixtures
SAE AMS2665 Brazing, Silver, For Use Up to 400 掳F (204 掳C)
SAE AMS2521 Coating, Reflection-Reducing for Instrument Glasses
SAE AMS2435 Coating, Tungsten Carbide-Cobalt Coating, Detonation Process (NONCURRENT Jun 2007)
SAE AMS2211 Tolerances, Magnesium Alloy Zk60a Extrusions (Cancelled Nov 1967)
SAE AMS2212 Tolerances Magnesium Alloy Sheet and Plate (Cancelled Nov 1967)
SAE AS478 Identification Marking Methods
SAE AIR810 Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, Mil-H-5606, Mil-H-6083, Mil-H-83282, and Mil-H-4617
SAE AS943 Starter, Pneumatic, Aircraft Engine, General Specification For
SAE AMS4038 Aluminum Alloy Plate - 5.6zn - 2.5mg - 1.6cu - 0.26cr (7075-T651) (Cancelled Jan 1968)
SAE AMS4039 Aluminum Alloy Plate, Alclad - 5.6zn - 2.5mg - 1.6cu - 0.26cr (Alclad 7075-T651) (Cancelled Jan 1968)
SAE AMS4033 Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mn (Cancelled Jan 1968)
SAE AMS4034 Aluminum Alloy, Plate, Alclad 4.4cu 1.5mg 0.60m (Cancelled Jan 1968)
SAE AIR797 Hose Characteristics and Selection Chart
SAE ARP24 Determination of Hydraulic Pressure Drop
SAE AS838 Aircraft Hydraulic Starter/Pumps
SAE AIR1047 A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
SAE AS870 Wrenching Configuration, Bi-Hexagonal (12 Point) Drive, Design Standard For
SAE AS82 Screw Thread Form, American National, Modified (National Round - NR)
SAE ARP465 Flange - Thermocouple
SAE ARP498 Design, Layout, Criteria - Plastic Integrally Lighted Panels
SAE ARP901 Bubble-Point Test Method
SAE ARP862 Skid Control Performance
SAE AIR822 Oxygen Systems for General Aviation
SAE ARP922 Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas
SAE AMS5604 Steel, Corrosion Resistant, Sheet, Strip, and Plate, 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb, Solution Heat Treated,
SAE AMS4035 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed
SAE AMS4117 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu
SAE AMS4116 Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Solution He
SAE AMS5688 Steel, Corrosion-Resistant, Wire, 18Cr - 9.0Ni (SAE 30302), Spring Temper
SAE AMS5786 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe (NONCURRENT Nov 20
SAE AMS5120 Steel Strip, 0.68 - 0.80C (SAE 1074)
SAE AMS4123 Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
SAE AMS2242 Tolerances, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and P
SAE AMS4153 Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treate
SAE AMS4161 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), Solution Heat Treated and Naturally
SAE AMS5671 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70
SAE AMS5042 Steel, Sheet and Strip, 0.15 Carbon, Maximum Forming Grade (NONCURRENT Aug 2009)
SAE AMS5040 Steel, Sheet and Strip, 0.15 Carbon, Maximum Deep Forming Grade
SAE AMS3195 Silicone Rubber Sponge, Closed Cell, Medium
SAE AMS5706 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0T
SAE AMS4190 Aluminum Alloy, Welding Wire 5.2Si (4043)
SAE AMS4029 Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS5122 Steel Strip (0.90 - 1.04C) (SAE 1095) Hard Temper (NONCURRENT Jul 2008)
SAE AMS5050 Steel Tubing, Seamless, 0.15 Carbon, Maximum, Annealed
SAE AMS2664 Brazing, Silver, for Use Up to 800 掳F (427 掳C)
SAE AMS5060 Steel, Bars, Forgings, and Tubing, 0.13 - 0.18C (SAE 1015) (NONCURRENT Mar 2008)
SAE AMS4154 Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Soluti
SAE AMS5069 Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018)
SAE ARP936 Capacitor, 10 Microfarad for EMI Measurements
SAE ARP953 Stress Dome in Fasteners
SAE AMS7724 Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant, 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co -
SAE AMS5746 Alloy Bars and Forgings, Corrosion and Heat Resistant, 15cr 45ni 4.1mo 4.1w 3.0ti 1.0al 31fe, Consumable Ele
SAE AMS5736 Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15cr 26ni 1.3mo 2.1ti 0.30v 1800Mdf (9
SAE AMS5740 Steel, Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr - 6.5Ni - 0.72Ti, Solution H
SAE AMS5739 Steel, Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr - 6.5Ni - 0.72Ti, Solution H
SAE AMS5685 Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (SAE 30305), Solution Heat Treated, Cold Finished (Ca
SAE AMS5603 Sheet and Strip 15cr 8.4ni 2.2mo 1.1al Vacuum Induction Melted, Solution Heat Treated (Cancelled May 2001)
SAE AMS5500 Steel, Corrosion-Resistant, Laminated, Sheet,Surface Bonded
SAE AMS5132 Steel, Bars, 0.90 - 1.03C
SAE AMS5121 Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed
SAE AMS5085 Steel Sheet, Strip, and Plate, 0.48 - 0.55C (SAE 1050), Annealed
SAE AMS5053 Steel Tubing, Welded, 0.13 Carbon, Maximum, Annealed (Cancelled Sep 2009)
SAE AMS5061 Steel, Low Carbon Bars, and Wire, 0.08 - 0.20 (NONCURRENT Feb 2009)
SAE AMS5062 Steel, Low Carbon, Bars, Forgings, Tubing, Sheet, Strip, and Plate, 0.25 Carbon, Maximum (NONCURRENT Aug 200
SAE AMS5030 Steel, Welding Wire 0.06 Carbon, Maximum (NONCURRENT Aug 2008)
SAE AMS5032 Wire, Steel, 0.18 - 0.23C (SAE 1020), Annealed
SAE AMS4352 Magnesium Alloy, Extrusions, 5.5Zn - 0.45Zr (ZK60A - T5), Precipitation Heat Treated
SAE AMS4160 Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed
SAE AMS4156 Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated
SAE AMS4163 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stre
SAE AMS4162 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Re
SAE AMS4147 Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved b
SAE AMS4150 Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation
SAE AMS4110 Aluminum Alloy, Bars and Rods, Rolled Or Cold Finished 4.0cu 0.70mn 0.50mg Stress Relief Stretched (Cancelle
SAE AMS4118 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si, (2017; -T4,
SAE AMS4119 Aluminum Alloy, Bars, Rolled Drawn, Or Cold Finished 4.4cu 1.5mg 0.60mn Stress-Relief Stretched (Cancelled J
SAE AMS4088 Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worke
SAE AMS4064 Aluminum Alloy, Clad Two Sides Sheet, 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet), Annealed
SAE AMS4036 Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Al
SAE AMS4059 Sheet and Plate - 4.4mg 0.70mn 0.15cr (Cancelled Feb 1996)
SAE AMS4058 Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-373) (Cancelled Feb 1996)
SAE AMS4057 Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-H323) (Cancelled Feb 1996)
SAE AMS4063 Aluminum Alloy, Clad One Side, Sheet, 1.25 Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed
SAE AMS4056 Aluminum Alloy, Sheet and Plate, 4.4Mg - 0.70Mn - 0.15Cr (5083-0), Annealed
SAE AMS3693 Adhesive, Modified Epoxy Moderate Heat Resistant, 120Mdc (250Mdf) Curing, Film Type (NONCURRENT Jan 1993)
SAE AMS3196 Silicone Rubber Sponge, Closed Cell, Firm
SAE AMS3170 Thinner, Alcohol-Ester (Cancelled Feb 2008)
SAE AMS3193 Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
SAE AMS3194 Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature
SAE AMS3125 Enamel, Glyceryl Phthalate, Engine Gray Baking (Cancelled Jun 2009)
SAE AMS3122 Enamel, Phenolic, Black Baking (Cancelled Jun 2009)
SAE AMS3120 Enamel, Glyceryl Phthalate, Black Baking (Cancelled Jun 2009)
SAE AMS3128 Aluminum Pigment Paste (NONCURRENT Jan 2000) (Cancelled Feb 2008)
SAE AMS3110 Primer, Zinc Chromate (Cancelled Jun 2009)
SAE AMS3108 Primer, Ocher Phenolic (Cancelled Jun 2009)
SAE AMS2690 Parallel Gap, Welding, Microelectronic Interconnections to Thin Film Substrates (NONCURRENT)
SAE AMS2675 Brazing, Nickel Alloy Filler Metal
SAE AMS2667 Brazing, Silver, For Small Pressurized Fittings
SAE AMS2421 Plating Magnesium for Solderability, Zinc Immersion Process (Cancelled Feb 2005)
SAE AMS2420 Plating of Aluminum for Solderability, Zinc Immersion Pre-Treatment Process
SAE ARP863 Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
SAE AIR887 Liquid Filter Ratings, Parameters and Tests
SAE AS1073 Sleeve Hose Assembly, Heat Shrinkable
SAE AIR951 Spark Energy Measurement, Alternative Method
SAE AS968 Flange - Accessory, 10.000 Bc Round, Design Standard For
SAE ARP920 Design and Installation of Pitot-Static Systems for Transport Aircraft
SAE ARP680 Universal Turnover Build-Up Stand Series for Propulsion Units And/Or Components
SAE AIR1069 Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 FT
SAE ARP506 High Temperature Insulated Terminal Lugs
SAE AMS5737 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings and Tubing, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B
SAE AMS2814 Packaging and Marking of Packages of Welding Wire, Premium Quality
SAE AMS2813 Packaging and Marking of Packages of Welding Wire, Standard Method
SAE AMS5732 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -
SAE AMS7490 Rings, Flash Welded, Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt
SAE AMS5798 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
SAE AMS4027 Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate), Solution a
SAE AMS3327 Fluorosilicone (FVMQ) Rubber, High Temperature Fuel and Oil Resistant, 70 - 80
SAE AMS2416 Plating, Nickel-Cadmium Diffused
SAE AMS4037 Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Tre
SAE AMS5735 Steel Bars, Forgings, Tubing, And Rings, Corrosion And Heatresistant 15cr - 26ni - 1.3mo - 2.1ti - 0 (Cancel
SAE AMS5643 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
SAE AMS4026 Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate), Solution H
SAE AMS5596 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb)
SAE AMS5629 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuu
SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat
SAE AMS5536 Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W -
SAE AMS5837 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb(Nb)
SAE AMS5120 Steel Strip, 0.68 - 0.80C (SAE 1074)
SAE AMS4045 Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate), Solution and
SAE AMS4082 Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation
SAE AMS2400 Plating, Cadmium
SAE AMS2401 Plating, Cadmium, Low Hydrogen Content Deposit
SAE AMS4166 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
SAE AMS4167 Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By
SAE AMS4169 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieve
SAE AMS4168 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieve
SAE AMS2469 Hard Anodic Coating on Aluminum and Aluminum Alloys
SAE AMS5612 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Anne
SAE AMS2816 Identification Welding Wire, Tab Marking Method