当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE J2878 Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
SAE J2878 Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
世界资料网 / 2019-12-14
Product Code:SAE J2878
Title:Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
Issuing Committee:Dummy Testing And Equipment Committee
Scope:This procedure establishes a recommended practice for performing a Low Speed Thorax Impact Test to the Hybrid III Small Female Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand by the industry to have a certification test which results in peak chest deflection similar to current full vehicle, frontal impact tests. An inherent problem exists with the current certification procedure because the normal (6.7 m/s) thorax impact test has test results for peak chest deflection that are greater than those currently seen in full vehicle, frontal tests.The intent of this document is to develop a low speed thorax certification procedure for the H-III5F dummy with a 3.0 m/s impact similar to the SAE J2779 procedure for the H-III50M dummy.
关键字: SAE J2878

相关资料

SAE J2878 Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
SAE J2878 Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
SAE J2191 Recommended Practice for Identification of Standardized Truck and Tractor Electrical Circuits
SAE J2261 Stop Lamps and Front- and Rear-Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J2602/3 File Structures for a Node Capability File (NCF)
SAE J551/17 Vehicle Electromagnetic Immunity - Power Line Magnetic Fields
SAE J649 Automatic Transmission Functions - Terminology
SAE J1982 Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles
SAE J515 Specification for O-ring Materials Used with Hydraulic Connectors
SAE J2402 Road Vehicles - Symbols for Controls, Indicators, and Tell-Tales
SAE J1725 Structural Modification for Personally Licensed Vehicles to Meet the Transportation Needs of Persons with Disa
SAE J1903 Automotive Adaptive Driver Controls, Manual
SAE J2311 Automatic Transmission Hydraulic Pump Test Procedure
SAE J1459 V-Ribbed Belts and Pulleys
SAE USCAR38 Performance specification for ultrasonically welded wire/cable termination
SAE J1474 Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations
SAE J755 Marine Propeller-Shaft Ends and Hubs
SAE CPFD1 J1349 Certified Power Engine Data for Ford 3.7L DOHC V6 (95 RON Calibration) as used in 2011 Ford Mustang - Le
SAE CPFD1 J3149 Certified Power Engine Data for Ford 3.7L DOHC V6 (91 RON Calibration) as used in 2011 Ford Mustang - Le
SAE CPFD2 J1349 Certified Power Engine Data for Ford 3.7L DOHC V6 (91RON Calibration) as used in 2011 Ford Mustang - Lev
SAE CPFD2 J1349 Certified Power Engine Data for Ford 3.7L DOHC V6 (95 RON Calibration) as used in 2011 Ford Mustang - Le
SAE J817 Engineering Design Serviceability Guidelines--Construction and Industrial Machinery--Maintainability Index--Off
SAE J817/2 Engineering Design Serviceability Guidelines--Construction and Industrial Machinery--Maintainability Index--O
SAE J817/1 Engineering Design Serviceability Guidelines--Construction and Industrial Machinery--Serviceability Definitio
SAE J403 Chemical Compositions of SAE Carbon Steels
SAE J1368 Child Restraint Anchorages and Attachment Hardware (Cancelled Dec 2009)
SAE J1699/3 Vehicle OBD II Compliance Test Cases
SAE J2816 Guide for Reliability Analysis Using the Physics-of-Failure Process
SAE J935 High-Strength Carbon and Alloy Die Drawn Steels
SAE J1100 Motor Vehicle Dimensions
SAE J2735 Dedicated Short Range Communications (DSRC) Message Set Dictionary
SAE J2540/2 ITIS Phrase Lists (International Traveler Information Systems)

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: