当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE J1239 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers
SAE J1239 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers
世界资料网 / 2020-01-19
Product Code:SAE J1239
Title:Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers
Issuing Committee:Connector Systems Standards Committee
Scope:This SAE Recommended Practice covers the wiring and rectangularly shaped connector standards for all types of trailers whose gross weight does not exceed 4540 kg (10 000 lb). These trailers are grouped in SAE J684 with running light circuit loads not to exceed 7.5 A per circuit. This document provides circuits for lighting, electric brakes, trailer battery charging, and an auxiliary circuit color code and protection for the wiring from hazards or short circuits. Color code is compatible with SAE J560 and ISO 1724-1980(E).
关键字: SAE J1239

相关资料

SAE J1239 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers
SAE J1239 Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers
SAE J1373 Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length
SAE J1985 Fuel Filter - Initial Single-Pass Efficiency Test Method
SAE J2111 Headlamp Cleaners
SAE J2718 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs.
SAE J2704 Tire Normal Force/Deflection and Gross Footprint Dimension Test
SAE J2869 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
SAE J2387 Dimensions and Tolerances for Coolant System Hoses
SAE J92 Snowmobile Throttle Control Systems
SAE J593 Backup Lamp (Reversing Lamp)
SAE J1319 Rear Fog Lamp Systems
SAE J2012DA Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions
SAE J1113/27 Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiate
SAE J1113/22 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Part 22-Immunity to Radiated Mag
SAE J1405 Optional Test Procedures for Hydraulic Hose Assemblies
SAE J1113/24 Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wi
SAE J1113/3 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power (Cancelled Aug 2010)
SAE J129 Engine and Transmission Identification Numbers
SAE J1298 Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations
SAE J1926/4 Connector for Fluid Power and General Use - Ports and Stud End with ASME B1.1 Threads and O-Ring Seal - Part
SAE J2505 Measurement of Vehicle-Roadway Frictional Drag
SAE J2789 Inertia Calculation for Single-Ended Inertia-Dynamometer Testing
SAE J1402 Automotive Air Brake Hose and Hose Assemblies
SAE J343 Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
SAE J2602/2 Lin Network for Vehicle Applications Conformance Test
SAE J1754/2 Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information
SAE J1754/3 Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information
SAE J1400 Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies
SAE J1594 Vehicle Aerodynamics Terminology
SAE SAE/ISO9244/08 Earth-moving machinery -- Product safety labels -- General principles
SAE J2521 Disc and Drum Brake Dynamometer Squeal Noise Matrix

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: