当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D3344-1990(2005) 波纹纸板总载蜡量的标准试验方法
ASTM D3344-1990(2005) 波纹纸板总载蜡量的标准试验方法
世界资料网 / 2019-12-07
【英文标准名称】: Standard Test Method for Total Wax Content of Corrugated Paperboard
【原文标准名称】: 波纹纸板总载蜡量的标准试验方法
【标准号】: ASTM D3344-1990(2005)
【标准状态】: 现行
【国别】:
【发布日期】: 1990
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D02.10.0A
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】: 胶纸板;蜡;含量测定;石油产品;润滑剂;试验
【英文主题词】: corrugated paperboard; wax; wax extraction; wax treated board
【摘要】: Many of the functional properties of wax-treated corrugated paperboard and cartons are dependent on the amount of wax present. In the case of wax-saturated, or wax-impregnated, paperboard the principal concern is with the weight of wax used relative to the weight of paperboard present, that is, the weight percent content or pickup. In some applications the saturating wax may be deposited in the three elements of the corrugated board in such a way as to individually control the amount in each element, that is, the medium and the two facings. In the case of wax-coated corrugated paperboard the principal concern is the weight of wax on the board surface per unit area. The functional values of the wax coating as a barrier or a decorative coating are dependent, in part, on the amount of wax in the continuous surface layer, relative to the area covered. The weight of coating relative to the weight of substrate is not usually a concern with regard to product quality.1.1 This test method covers the determination of the weight of wax that is present in a specimen of wax-treated corrugated paperboard. The test method is applicable to specimens that have been waxed by either impregnation (saturation) operations or coating operations, or combinations of such operations.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For precautionary statement, see 5.4 and 7.2.
【中国标准分类号】: Y30
【国际标准分类号】: 85_060
【页数】: 3P.;A4
【正文语种】:

关键字: ASTM D334

相关资料

ASTM D3344-1990(2005) 波纹纸板总载蜡量的标准试验方法
ASTM D3344-1990(2005) 波纹纸板总载蜡量的标准试验方法
ASTM B762-1990(2005) 金属涂层和无机物涂层的不同抽样
ASTM C559-1990(2005) 用物理测量法测定碳加工品及石墨制品松密度的试验方法
ASTM D2350-1990(2005) 从可还原溶剂型涂料分离出的白色颜料中氧化锑的试验方法
ASTM D2351-1990(2005) 从可还原溶剂型涂料分离出的白色颜料中硫化物的标准试验方法
ASTM D3500-1990(2003) 胶合板承受拉力的标准试验方法
ASTM D3195-1990(2004) 转子流量计校准的标准实施规程
ASTM C1134-1990(2007) 刚性绝热层在部分浸泡后的水分保持能力的标准试验方法
ASTM E1379-1990(2005) 实验室玻璃杜瓦瓶
ASTM E1380-1990(2005) 多刻度的0.1毫升或稍大容量的实验室吸管(不包括一次性的凝血酶原和微型滴管)的色码的标准规范
ASTM D5126-1990(2004) 现场比较法测定渗流区液体传导指数的标准指南
ASTM E441-1990 用醋酸汞测定有机化合物中乙烯基的不饱和度的试验方法
ASTM D2771-1990(1997)e1 电气级氧化镁压实密度的试验方法
ASTM D2755-1990(1997)e1 电气级氧化镁取样和减少试验重量的试验方法
ASTM D3008-1990 气相色谱法测定松香中树脂的试验方法
ASTM D569-1990 热塑塑料模制材料流动性的试验方法
ASTM D3901-1990 民用园林软管
ASTM D4264-1990 室内储水管用橡胶衬里的消防软管和橡胶增强软管的组合件的压力试验方法
ASTM D3140-1990 扩口聚烯烃管及管道系统
ASTM F1310-1990 65加仑配药罐
ASTM D4237-1990 蒸汽设备用橡胶软管的试验方法
ASTM D881-1990 视线通过透明塑料软片发生偏差的试验方法
ASTM F1280-1990(1999) 在淡水及其它内陆环境、非渗透层上使用浮油分散剂的生态条件
ASTM E233-1990 正丁基锂溶液的分析试验方法
ASTM D5043-1990 覆层现场识别的试验方法
ASTM D3602-1990a 航空涡轮燃料的水分离特性试验(现场试验)(05.02)
ASTM D637-1990 透明塑料平板表面不规则性的试验方法
ASTM E1357-1990(2001) 用硫杆菌铁氧化剂从黄铁矿中测定铁的双浸取率的测试方法
ASTM B387-1990(2001) 钼及钼合金棒、条和线材
ASTM B314-1990 通信电缆用铝1350线
ASTM A819-1990 雨水管和排水管用2型镀铝钢薄板

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: