当前位置: 首页 > 国际标准 > BS 英国标准 > BS EN 1363-1-1999 耐火试验.一般要求
BS EN 1363-1-1999 耐火试验.一般要求
世界资料网 / 2018-10-24
【英文标准名称】: Fire resistance tests - General requirements
【原文标准名称】: 耐火试验.一般要求
【标准号】: BS EN 1363-1-1999
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1999-11-15
【实施或试行日期】: 1999-11-15
【发布单位】: 英国标准学会(GB-BSI)
【起草单位】: BSI
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 试验大气环境;间隙规;热电偶;温度测量仪表;尺寸;试样制备;环境温度;温度测量;温度;精密度;施工材料;压力;建筑物防火;燃烧试验;性能;建筑系统构件;尺寸公差;试验设备;验证;负荷;耐火性;炉;试样;报告;装配;挠曲试验;公差(测量);试验条件;荷载能力
【英文主题词】: Beams;Bending stress;Building component test;Bushings;Capacitive loads;Classification systems;Components;Conditioning;Conditions;Construction;Constructions;Curves (geometry);Definitions;Fire;Fire protection;Fire resistance;Fire tests;Fire-resistant time;Heating;Impact tests;Operation;Performance tests;Pressure;Proof loading;Resistors;Specification (approval);Structural fire protection;Structural members;Supporting structures;Surface spread of flame;Temperature;Test equipment;Test results;Test specimens;Testing;Thermal insulation;Thermocouples;Time of flame influence
【摘要】: This part of EN1363 establishes the general principles for determining the fire resistance of various elements of construction when subjected to standard fire exposure conditions. Alternative and additional procedures to meet special requirements are given in EN 1363-2.The principle that has been embodied within all European standards relating to fire resistance testing is that where aspects and procedures of testing are common to all specific test methods e.g. the temperature/time curve, then they are specified in this test method. Where a general principle is common to many specific test methods, but the detail varies according to the element being tested e.g. the measurement of unexposed face temperature, then the principle is given in this document, but the detail is given in the specific test method. Where certain aspects of testing are unique to a particular specific test method e.g. the air leakage test for fire dampers, then no details are included in this document.The test results obtained may be directly applicable to other similar elements, or variations of the element tested. The extent to which this is permitted is considered under the field of direct application of the test result. This is restricted to the provision of rules which limit the variation from the tested specimen without further evaluation. The rules for determining the permitted variations are given in each specific test method.Variations outside those permitted by direct application are covered under extended application of test results. This results from an in-depth review of the particular product design and performance in test(s) by a recognized authority. Further consideration on direct and extended application is given in annex A.The duration for which the tested element, as modified by its direct or extended field of application, satisfies specific criteria will permit subsequent classification to be made.All values given in this Standard are nominal unless otherwise specified.
【中国标准分类号】: C82
【国际标准分类号】: 13_220_50
【页数】: 52P.;A4
【正文语种】: 英语

关键字: BS EN 1

相关资料

BS EN 1363-1-1999 耐火试验.一般要求
BS EN 1363-1-1999 耐火试验.一般要求
BS EN 50181-1999 不包括液体填充变压器在内的设备用大于1KV和达36KV范围为250A到1.25KA的插入型套管
BS EN 12490-1999 木材和木材制品的持久性.防腐处理实心木材.防腐处理木材中杂酚油保留和渗透性的测定
BS ISO/IEC 14888-3-1998 信息技术.保密技术.带附录的数字签名.基于合格证的结构方式
BS EN 12547-1999+A1-2009 离心机.通用安全性要求
BS 2782-8 Method 830A-1999 塑料.浸入液态化学试剂中效果测定的试验方法
BS 4193-7-1999 硬质合金刀具.可转位刀片车削和仿形用单刃刀具夹.尺寸
BS EN 12549-1999+A1-2008 声学.紧固件旋拧工具的噪声试验规范.工程法
BS EN 12373-3-1999 铝和铝合金.阳极氧化.阳极氧化涂层单位面积(表面密度)质量的测定.分束显微镜无损测量
BS EN 12533-1999 脚轮和车轮.速度大于1.1 m/s(4km/h)和小于4.4 m/s(16 km/h)的设备用脚轮和车轮
BS 4A 113-1999 镀镉蘑菇头统一螺纹开槽螺栓规范
BS 4A 114-1999 耐腐蚀钢制T头开槽螺栓用规范(强度等级880/1080)
BS EN 1493-1999 车辆升降机
BS EN 45510-4-2-1999 发电站设备采购指南.锅炉辅助设备.煤气-空气、蒸汽-空气和煤气-煤气加热器.煤气-空气、蒸汽-空气和煤气-煤气加热器
BS EN 60630-1998+A6-2009 白炽灯用最大灯具外廓
BS EN 1938-1999 个人眼睛保护.摩托车和机动脚踏两用车护目镜
BS EN 60700-1-1998+A2-2008 高压直流(HVDC)输电用晶闸管换流阀.第1部分:电气试验
PD CR 13425-1999 地理信息.概观
PD CR 13436-1999 地理信息.词汇表
BS ISO/TR 12765-1999 封闭式管道中液体流量的测量.使用转接-时间超声流量计法
BS EN ISO 14631-1999 冲击改良的聚苯乙烯(PS-I)挤压片材.要求和试验方法
BS EN 12061-1999 塑料管道系统.热塑配件.耐冲击试验方法
BS EN 1979-1999 塑料管道和管道系统.热塑螺旋型结构壁的管道.接缝拉伸强度测定
BS 6782-11-1999 涂料用胶粘剂.工业用硝化纤维素溶液粘度的测定及此类溶液的分类
BS EN ISO 13628-1-1999 石油和天然气工业.水下采油系统的设计和操作.一般要求和推荐规范
BS EN 10250-1-1999 一般工程用敞口钢模锻件.一般要求
BS EN 10228-4-1999 钢锻件无损检验.奥氏体和奥氏体-铁素体不锈钢锻件超声检验
BS EN 12451-1999 铜和铜合金.热交换器用圆无缝管
BS EN 10228-1-1999 钢锻件无损检验.磁粉检验
BS EN 12632-1999 水果汁和蔬菜汁.乙酸(乙酸酯)含量的酶法测定.NAD分光光度法
BS EN 12868-1999 儿童使用和护理用品.弹性或橡皮奶嘴和安慰用品中N-亚硝胺和N-nitrosatable释放量测定方法

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: