当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE AIR1672 Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfac
SAE AIR1672 Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfac
世界资料网 / 2019-11-17
Product Code:SAE AIR1672
Title:Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfaces
Issuing Committee:A-21 Aircraft Noise Measure Noise Aviation Emission Modeling
Scope: Acquisition of free-field data is of practical significance in the field of aeronautical acoustics. The need for free-field data includes (but is not restricted to) the following: comparison of acoustical data obtained from the same engine under various measurement conditions; comparison of the results obtained from models with those from an engine on a test stand; comparison of noise measurements made on the same engine under static and in-flight conditions; design of test facilities; standardization of techniques for 'in situ' acoustical measurements; spectral decomposition to isolate the contribution of different sources to the total noise; and prediction of aircraft noise on the basis of methods which, generally, provide free-field data. There is an increasing tendency to test full-scale engine components and scale models in anechoic test facilities that provide free-field conditions. This AIR complements this work by identifying those methods in current use which provide free-field acoustic data for measurements on engines under static conditions in the presence of a ground surface. Separate Appendices to this AIR describe different methods for noise measurement in the field that conform with the state-of-the-art to a certain extent. That is, each method has generally been systematically used by at least oe free-field conditions. This AIR complements this work by identifying those methods in current use which provide free-field acoustic data for measurements on engines under static conditions in the presence of a ground surface. Separate Appendices to this AIR describe different methods for noise measurement in the field that conform with the state-of-the-art to a certain extent. That is, each method has generally been systematically used by at least one organization and has been substantiated by data obtained from at least one test site.ne organization and has been substantiated by data obtained from at least one test site.
关键字: SAE AIR1

相关资料

SAE AIR1672 Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfac
SAE AIR1672 Practical Methods to Obtain Free-Field Sound Pressure Levels From Acoustical Measurements Over Ground Surfac
SAE ARP716 Gap Settings for Aircraft Piston Engine Spark Plugs
SAE ARP997 Installation and Stowage Provisions for Emergency Equipment in the Transport Aircraft Passenger Cabin
SAE AS611 Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods For
SAE AS678 Gasket - 18mm Folded Steel Aircraft
SAE AS8019 Airspeed Instruments
SAE AIR3277 Installation Procedures - Pin/Plug Expansion Type
SAE AS3124 Pin, Expansion - Aluminum, 2024-T4, Short
SAE AS3125 Plug, Expansion - Cres, 416, Long; Std and .010 Oversize Diameters
SAE AS3126 Pin, Expansion - Cres, 416, Long
SAE AS3121 Plug, Expansion - Aluminum, 2024-T4, Long; Std and .010 Oversize Diameters
SAE AS3122 Pin, Expansion - Aluminum, 2024-T4, Long
SAE AS3123 Plug, Expansion - Aluminum, 2024-T4, Short; Std and .010 Oversize Diameters
SAE AS3131 Plug, Expansion - Cres, 303, Short; Std and .010 Oversize Diameters
SAE AS3132 Pin, Expansion - Cres, 303, Short
SAE AS3129 Plug, Expansion - Cres, 303, Long; Std and .010 Oversize Diameters
SAE AS3130 Pin, Expansion - Cres, 303, Long
SAE AS3127 Plug, Expansion - Cres, 416, Short; Std and .010 Oversize Diameters
SAE AS3128 Pin, Expansion - Cres, 416, Short
SAE AIR3276 Boss - Plug/Pin, Expansion Type Hole Preparation
SAE AS8033 Nickel Cadmium Vented Rechargeable Aircraft Batteries (Non-Sealed, Maintainable Type)
SAE ARP1536 Abrasion Test Procedure for Chafe Guard
SAE AIR1539 Environmental Control System Contamination
SAE AIR818 Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design
SAE AMS1529 Cleaner for Aircraft Exterior Surfaces, Emulsion, Foam-On, Pressure-Spray Type
SAE AMS1528 Cleaner for Aircraft Exterior Surfaces, Emulsion, Pressure-Spray Type
SAE AMS1530 Cleaner for Aircraft Exterior Surfaces, Wipe-On, Wipe-Off
SAE AMS3373/1 Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Low Viscosity, Room Temper
SAE AMS3809 Tape, Adhesive, Pressure-Sensitive, Double-Faced, Carpet Tie Down
SAE AS1004 Fitting, Elbow, 90 Degree, Standard and Reducer, Flareless
SAE AS1001 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal Port on Side, Flareless

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: