当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM B822-2002 用光散射作金属粉末和相关化合物的粒度分布测试的标准试验方法
ASTM B822-2002 用光散射作金属粉末和相关化合物的粒度分布测试的标准试验方法
世界资料网 / 2019-11-13
【英文标准名称】: Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
【原文标准名称】: 用光散射作金属粉末和相关化合物的粒度分布测试的标准试验方法
【标准号】: ASTM B822-2002
【标准状态】: 现行
【国别】:
【发布日期】: 2002
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: B09.02
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: laser diffraction; light scattering; metal powders; particle size distribution; powder metallurgy; Number Code 19.120 (Particle size analysis. Sieving)
【摘要】: Reported particle size measurement is a function of both the actual particle dimension and shape factor as well as the particular physical or chemical properties being measured. Caution is required when comparing data from instruments operating on different physical or chemical parameters or with different particle size measurement ranges. Sample acquisition, handling, and preparation can also affect reported particle size results. 5.1.1 It is important to recognize that the results obtained by this test method, or any other method for particle size determination using different physical principles, may disagree. The results are strongly influenced by the physical principles employed by each method of particle size analysis. The results of any particle sizing method should be used only in a relative sense; they should not be regarded as absolute when comparing results obtained by other methods. Light scattering theory has been available for many years for use in the determination of particle size. Several manufacturers of testing equipment now have units based on these principles. Although each type of testing equipment uses the same basic principles for light scattering as a function of particle size, different assumptions pertinent to application of the theory, and different models for converting light measurements to particle size, may lead to different results for each instrument. Therefore, the use of this test method cannot guarantee directly comparable results from different types of instruments. Knowledge of the particle size distribution of metal powders is useful in predicting the powder-processing behavior and ultimate performance of powder metallurgy parts. Particle size distribution is related closely to the flowability, moldability, compressibility, and die-filling characteristics of a powder, as well as to the final structure and properties of finished powder metallurgy (P/M) parts. This test method is useful to both suppliers and users of powders in determining the particle size distributions for product specifications, manufacturing control, development, and research. This test method may be used to obtain data for comparison between lots of the same material or for establishing conformance, as in acceptance testing.1.1 This test method covers the determination of the particle size distribution by light scattering, reported as volume percent, of particulate materials including metals and compounds.1.2 This test method applies to analyses with both aqueous and nonaqueous dispersions. In addition, analysis can be performed with a gaseous dispersion for materials that are hygroscopic or react with a liquid carrier.1.3 This test method is applicable to the measurement of particulate materials in the range of 0.4 to 2000 m, or a subset of that range, as applicable to the particle size distribution being measured.1.4 The values stated in SI units are to be regarded as the standard.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: A42
【国际标准分类号】: 19_120
【页数】: 3P.;A4
【正文语种】:

关键字: ASTM B822

相关资料

ASTM B822-2002 用光散射作金属粉末和相关化合物的粒度分布测试的标准试验方法
ASTM B822-2002 用光散射作金属粉末和相关化合物的粒度分布测试的标准试验方法
ASTM D952-2002 薄板塑料和电绝缘材料粘结强度的标准试验方法
ASTM D5768-2002(2006) 妥尔油脂肪酸碘值测定的标准试验方法
ASTM D5383-2002(2003) 工艺美术工作者用目视确定工美材料光牢性的标准操作规程
ASTM D204-2002 缝纫线的标准试验方法
ASTM D4802-2002 聚甲基丙烯酸酯丙烯酸塑料片标准规范
ASTM D6497-2002 土工薄膜与渗透层或结构间的机械连接标准指南
ASTM D6769-2002 完全粘结的寒冷条件下使用的预制增强改良沥青薄膜防水系统应用的标准指南
ASTM D6802-2002 用光谱法测定矿质绝缘油中可溶解的衰减产品相对含量的试验方法
ASTM D3641-2002 热模塑和挤塑材料的喷射模塑法试样标准规程
ASTM D3693-2002 标签标明的缝纫线每团长度的标准规范
ASTM D2494-2002 纱线或人造纤维或纤维束货包的商业质量的标准试验方法
ASTM D6774-2002 利用动态纱试验机测定织纹纱的夹和压缩特性的标准试验方法
ASTM D2247-2002 涂层在100%相对湿度下耐水性的试验的标准操作规程
ASTM D2168-2002a 实验室机械捣实土壤压实器校准的标准试验方法
ASTM D6754-2002 酮乙烯酯基薄板屋面材料标准规范
ASTM C938-2002 预置集料混凝土的灌浆混合物的配比的实施规范
ASTM C941-2002 在实验室内进行预置集料混凝土灌浆混合料保水性试验的标准试验方法
ASTM C943-2002 在实验室内进行预置集料混凝土的密度和强度试验用圆柱体和棱柱体制作试验的标准规范
ASTM C937-2002 预置集料混凝土的灌浆流动机械的标准规范
ASTM D4246-2002 在90℃时电线和电缆的耐臭氧热塑性弹性体绝缘的标准规范
ASTM E2211-2002 电子个人(用户)医用记录仪的用户和供应商之间规则的标准实施规程
ASTM E2232-2002 辐射处理中计算吸收剂量的数学方法的选择和使用的标准指南
ASTM E1115-2002 外科手用擦洗剂配方评估的试验方法
ASTM B821-2002(2007) 粒度分析用金属粉末和相关化合物的液体分散标准指南
ASTM F1089-2002 外科仪器腐蚀的标准试验方法
ASTM E1469-2002 用多层板采样器采集深海大型无脊椎动物的标准实施规范
ASTM E1468-2002 用吊篮采样器采集深海大型无脊椎动物的标准实施规范
ASTM D1352-2002 电线和电缆用耐臭氧的丁基橡胶绝缘材料的标准规范
ASTM D13-2002 松脂油的标准规范
ASTM D2361-2002 煤中氯含量的标准测试方法

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: