当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D953-2002 塑料支承强度的标准试验方法
ASTM D953-2002 塑料支承强度的标准试验方法
世界资料网 / 2019-11-17
【英文标准名称】: Standard Test Method for Bearing Strength of Plastics
【原文标准名称】: 塑料支承强度的标准试验方法
【标准号】: ASTM D953-2002
【标准状态】: 现行
【国别】:
【发布日期】: 2002
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D20.10
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】: 材料强度;试验;塑料
【英文主题词】: bearing strength; compression strength; plast; Number Code 83.080.01 (Plast in general)
【摘要】: This bearing strength test for plastics is intended to apply in the specification of various thermoplastic or thermosetting products in sheet form where rivets, bolts, or similar fastenings are to be used in joining members or sections. It also is intended to apply wherever sheet materials of the classes indicated are required to sustain edgewise loads that are applied by means of pins or rods of circular cross section which pierce the sheet perpendicular to the surface. The purpose of the test is to determine the bearing strength of the material and to show the bearing stress versus the deformation of the hole. The allowable deformation of the hole in the material should be such as to produce no looseness of joints. While it is a known fact that higher strength materials will generally give higher bearing strengths, there is no satisfactory method by which bearing strength may be estimated from tensile or compressive properties of the material. Before proceeding with this test method, reference should be made to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions or testing parameters or combination thereof covered in the relevant ASTM materials specification shall take precedence over those in this test method. If there are no relevant ASTM material specifications then the default conditions apply.1.1 This test method covers the determination of the bearing strength of rigid plastics in either sheet or molded form. Procedure A is applicable for tension loading and Procedure B for compression loading.1.2 Test data obtained by this test method is relevant and appropriate for use in engineering design.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 18212;There is no known ISO equivalent to this standard.
【中国标准分类号】: G31
【国际标准分类号】: 83_080_01
【页数】: 6P.;A4
【正文语种】:

关键字: ASTM D953

相关资料

ASTM D953-2002 塑料支承强度的标准试验方法
ASTM D953-2002 塑料支承强度的标准试验方法
ASTM D1968-2002a(2007) 纸和纸制品相关术语
ASTM E925-2002 光谱狭缝宽度不超过2nm的紫外线-可见光分光光度计的校准监测的标准实施规程
ASTM F1604-2002 冰淇淋、软饮料、牛奶冰淇淋冷柜标准规范
ASTM B452-2002 电子设备用包铜钢导线标准规范
ASTM E2195-2002e1 与咨询文件检验相关的标准术语
ASTM F918-2002 不掺碳酸气的机械冷藏饮料自动售货机(可见产品)的标准规范
ASTM D5291-2002(2007) 仪器测定石油产品及润滑剂中碳、氢和氮含量的标准试验方法
ASTM D6588-2002 轮胎棱疲劳的标准试验方法(盘式疲劳试验)
ASTM F1961-2002a 交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的标准规范
ASTM D5891-2002 土工合成粘土衬的粘土成分流失的标准试验方法
ASTM G98-2002 材料耐磨损性的标准试验方法
ASTM F2182-2002a 磁共振成象时测量射频感应加热接近被动性植入物的标准试验方法
ASTM C1543-2002 利用池塘法测定氯化物渗透到混凝土中的标准试验方法
ASTM C597-2002 对通过混凝土的脉冲速度的标准试验方法
ASTM E1824-2002 拉力下热机械分析的玻璃转变温度分配的标准试验方法
ASTM D2111-2002(2007) 卤化有机溶剂及其混合物的比重和密度的标准试验方法
ASTM D1508-2002(2007) 碳黑、球状细粒磨损的标准试验方法
ASTM F1277-2002 用离子选择电极技术测定包装和衬垫材料中可沥虑氯化物的标准测试方法
ASTM D4832-2002 被控制的低强度材料测试筒的制备和测试的标准检测方法
ASTM C1311-2002 溶剂释放器密封剂的标准规范
ASTM C1206-2002 铁(II)/铬(VI)安培计滴定法测定钚的试验方法
ASTM E2215-2002 评价轻水核电反应堆监视舱的标准实施规程
ASTM E185-2002 轻水冷却核反应堆容器的监督程序设计的标准操作规程
ASTM D6815-2002a 木制和木基产品的荷载和蠕变效应的持续时间的评价的标准规范
ASTM E1838-2002 利用成人自愿者试验液体卫生洗手剂的去除病毒有效性的标准试验方法
ASTM F811-2002 机动车辆的轮胎试验用加速度计的标准实施规程
ASTM C1084-2002 硬化水硬水泥混凝土的硅酸盐水泥含量的标准试验方法
ASTM F2206-2002 熔接聚乙烯塑料管、配件、薄板、厚板或板坯的成品配件的标准规范
ASTM B174-2002(2007)e1 电导线用成束绞捻的铜导线标准规范
ASTM B547/B547M-2002 成形的和电弧焊接的铝及铝合金圆管标准规范

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: