当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM F437-2006 加螺纹氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
ASTM F437-2006 加螺纹氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
世界资料网 / 2020-02-19
【英文标准名称】: Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
【原文标准名称】: 加螺纹氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
【标准号】: ASTM F437-2006
【标准状态】: 现行
【国别】:
【发布日期】: 2006
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: F17.10
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】: 建筑;配件;管道配件;塑料;塑料制品;聚氯乙烯
【英文主题词】:
【摘要】: 1.1 This specification covers chlorinated poly(vinyl chloride) (CPVC) threaded Schedule 80 pipe fittings. Included are requirements for materials, workmanship, dimensions, and burst pressure. Note 1The CPVC fittings covered by this specification were covered previously in Specification D 2464. 1.2 The products covered by this specification are intended for use with the distribution of pressurized liquids only, which are chemically compatible with the piping materials. Due to inherent hazards associated with testing components and systems with compressed air or other compressed gases some manufacturers do not allow pneumatic testing of their products. Consult with specific product/component manufacturers for their specific testing procedures prior to pneumatic testing.Note 2Pressurized (compressed) air or other compressed gases contain large amounts of stored energy which present serious saftey hazards should a system fail for any reason.1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only. The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: J15;G33
【国际标准分类号】: 23_040_45
【页数】: 4P.;A4
【正文语种】:

关键字: ASTM F437

相关资料

ASTM F437-2006 加螺纹氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
ASTM F437-2006 加螺纹氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
ASTM F439-2006 氯化聚氯乙烯(PVC)塑料管配件的标准规范.表80
ASTM D4647-2006 用针孔试验做分散粘土识别和分类的标准试验方法
ASTM F384-2006 金属斜角整形外科骨折固定设备的标准规范和试验方法
ASTM D4310-2006b 测定抑制矿物油淤渣和腐蚀倾向的标准试验方法
ASTM D6891-2006a 评定IVA序列火花点火发动机中汽车发动机油的标准试验方法
ASTM D2036-2006 水中氰化物的标准测试方法
ASTM D7251-2006e1 杂色塑料壁板产品颜色和外观保持性的标准规范
ASTM A671-2006 常温和较低温用电熔焊钢管的标准规范
ASTM A794-2006 冷轧碳素商用钢薄板材(最高含碳量为0.16%~0.25%)的标准规范
ASTM B846-2006a 铜和铜合金标准术语
ASTM D6281-2006 用透射式电子显微镜直接转移法测定周围环境和室内空气中气载石棉浓度的标准试验方法
ASTM E2536-2006 评估防火试验中不确定度测量用标准指南
ASTM B833-2006 钢材防腐蚀用热喷镀(金属化)的锌和锌合金金属丝标准规范
ASTM B594-2006 航空设备用铝合金锻制品超声波检验的标准实施规程
ASTM C55-2006e1 混凝土建筑物砖的标准规范
ASTM C1634-2006 混凝土贴面砖的标准规范
ASTM E1177-2006 发动机冷却液级乙烯甘醇标准规范
ASTM E1975-2006 S-280/G 电气设备外罩的标准规范
ASTM D4303-2006 绘画涂料中使用的颜料耐光性的标准试验方法
ASTM D7165-2006 基于On-line/At-line分析的气体色谱法测定气体燃料中硫含量的标准实施规范
ASTM F1624-2006 用增长载荷技术测量钢中氢脆性的标准试验方法
ASTM A892-2006 规定高碳轴承钢微观结构的定义和等级
ASTM F2620-2006 聚乙烯管及配件热熔连接的标准实施规范
ASTM F2279-2006 固定翼轻型体育飞机生产的质量保证用标准实施规范
ASTM C836-2006 与独立磨损层一起使用的高固体含量并使用冷却液体的弹性防水薄膜的标准规范
ASTM C709-2006 人造碳和石墨的相关标准术语
ASTM D36-2006 沥青软化点的标准试验方法(环球仪)
ASTM E2021-2006 尘埃层热表面燃烧温度的标准试验方法
ASTM D7103-2006 医用手套评定的标准指南
ASTM D1418-2006 橡胶和橡胶胶乳的标准规程.术语

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: