当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM A775/A775M-2007b 环氧树脂涂覆的增强钢筋用标准规范
ASTM A775/A775M-2007b 环氧树脂涂覆的增强钢筋用标准规范
世界资料网 / 2019-12-07
【英文标准名称】: Standard Specification for Epoxy-Coated Steel Reinforcing Bars
【原文标准名称】: 环氧树脂涂覆的增强钢筋用标准规范
【标准号】: ASTM A775/A775M-2007b
【标准状态】: 现行
【国别】:
【发布日期】: 2007
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: A01.05
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】: 涂层要求; 混凝土钢筋; 耐腐蚀性;环氧树脂涂层; 钢筋
【英文主题词】: coating requirements; concrete reinforcement; corrosion resistance; epoxy coating; steel bars
【摘要】: 1.1 This specification covers deformed and plain steel reinforcing bars with protective epoxy coating applied by the electrostatic spray method. Note 18212;The coating applicator is identified throughout this specification as the manufacturer. 1.2 Other organic coatings may be used provided they meet the requirements of this specification. 1.3 Requirements for coatings are contained in Annex A1. 1.4 Requirements for patching material are contained in Annex A2. 1.5 Guidelines for construction practices at the job-site are presented in Appendix X1. 1.6 This specification is applicable for orders in either SI units (as Specification A 775M) or inch-pound units [as Specification A 775]. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: H44
【国际标准分类号】: 77_140_15
【页数】: 11P.;A4
【正文语种】:

关键字: ASTM A775A7

相关资料

ASTM A775/A775M-2007b 环氧树脂涂覆的增强钢筋用标准规范
ASTM A775/A775M-2007b 环氧树脂涂覆的增强钢筋用标准规范
ASTM A738/A738M-2007 中温和低温设备用经热处理的碳锰硅钢压力容器板标准规范
ASTM A817-2007 链状围栏铁丝和波浪形张紧丝用金属镀层钢丝的标准规范
ASTM B760-2007 钨制厚板材、薄板材和箔的标准规范
ASTM B953-2007 光谱化学分析用镁和镁合金取样的标准实施规程
ASTM B543-2007e1 焊接的铜及铜合金热交换管的标准规范
ASTM B910/B910M-2007 退火铜包覆钢丝电线标准规范
ASTM B777-2007 钨基高密度金属用标准规范
ASTM E1833-2007a 化学成分测定用铸型中泡铜取样的标准实施规程
ASTM E53-2007 重量测定法测定非合金铜中铜的标准试验方法
ASTM A413/A413M-2007 碳素钢链的标准规范
ASTM B250/B250M-2007 锻造铜合金丝一般要求的标准规范
ASTM B139/B139M-2007 磷青铜条材、棒材和型材的标准规范
ASTM B197/B197M-2007 铜铍合金线标准规范
ASTM E539-2007 6铝4钒钛合金的X射线荧光光谱测定分析用标准试验方法
ASTM B248-2007 锻制铜和铜合金厚板、薄板、带材及轧制棒材的一般要求的标准规范
ASTM A496/A496M-2007 钢筋混凝土用变形钢丝的标准规范
ASTM E2492-2007 用Demeri开环试验评定薄板金属回弹性的标准试验方法
ASTM B523/B523M-2007 无缝和焊接锆及锆合金管标准规范
ASTM B550/B550M-2007 锆及锆合金棒材和线材的标准规范
ASTM E1771-2007 测定阳极氧化粗铜中的酮含量的标准试验方法
ASTM A328/A328M-2007 薄钢板桩的标准规范
ASTM A722/A722M-2007 预应力混凝土用无涂覆的高强度钢筋的标准规范
ASTM B196/B196M-2007 铜铍合金条及棒标准规范
ASTM E407-2007 微蚀金属和合金的标准实施规程
ASTM B640-2007 空调及制冷设备用焊接铜管标准规范
ASTM B776-2007 铪和铪合金带材、薄板材和厚板材的标准规范
ASTM A356/A356M-2007 汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件的标准规范
ASTM A466/A466M-2007 非焊接碳素钢链标准规范
ASTM F2516-2007e2 镍-钛超弹性材料拉伸试验的标准试验方法
ASTM F1505-2007 绝缘手工工具用标准规范

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: