当前位置: 首页 > 协会标准 > SAE 美国机动车工程师学会 > SAE ARP988 Electrohydraulic Mechanical Feedback Servoactuators
SAE ARP988 Electrohydraulic Mechanical Feedback Servoactuators
世界资料网 / 2019-12-14
Product Code:SAE ARP988
Title:Electrohydraulic Mechanical Feedback Servoactuators
Issuing Committee:A-6b1 Hydraulic Servo Actuation Committee
Scope: The recommendations contained herein are confined to the input and output characteristics of electrohydraulic mechanical feedback servoactuators. The information presented should be useful for standardizing the terminology and for specification of physical and performance parameters.The recommendations do not restrict nor attempt to define the internal design characteristics of servoactuators. As such, the material is equally applicable to servoactuators having different internal functioning, different ratings, different physical size, etc. In certain instances, standards for actuator design are recommended to increase interchangeability as, for example, pigtail color-coding and actuator polarity.The specifications contained herein should be adequate to describe electrohydraulic mechanical feedback servoactuators used for position control. Additional specifications may be necessary to define special requirements for specific control systems. Certain dynamic compensation methods will be discussed.
Rationale: The recommendations contained herein are confined to the input and output characteristics of electrohydraulic mechanical feedback servoactuators. The information presented should be useful for standardizing the terminology and for specification of physical and performance parameters.The recommendations do not restrict nor attempt to define the internal design characteristics of servoactuators. As such, the material is equally applicable to servoactuators having different internal functioning, different ratings, different physical size, etc. In certain instances, standards for actuator design are recommended to increase interchangeability as, for example, pigtail color-coding and actuator polarity.The specifications contained herein should be adequate to describe electrohydraulic mechanical feedback servoactuators used for position control. Additional specifications may be necessary to define special requirements for specific control systems. Certain dynamic compensation methods will be discussed.
关键字: SAE ARP988

相关资料

SAE ARP988 Electrohydraulic Mechanical Feedback Servoactuators
SAE ARP988 Electrohydraulic Mechanical Feedback Servoactuators
SAE AS13341 Process for Barrier Coating of Anti-Friction Bearings (Cancelled Oct 2009)
SAE AS18280/1 Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi
SAE AMS2759/10 Automated Gaseous Nitriding Controlled by Nitriding Potential
SAE AMS2759/1 Heat Treatment of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strength Below 220 ksi (1517 MPa)
SAE AMS2759/6 Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts
SAE AMS2759/11 Stress Relieve of Steel Parts
SAE AMS2759 Heat Treatment of Steel Parts, General Requirements
SAE AIR1243 Anti Blow-By Design Practice for Cap Seals
SAE AIR4986 Engine Electrostatic Gas Path Monitoring (Cancelled Oct 2009)
SAE ARP6010 Surface Finish Guidelines for Sealing Systems
SAE AS42701 Validation Methods for MIL-STD-1760D Mission Stores
SAE AS1908 Threads, Internal profile, Preload-Locking, Specification For
SAE AS5235 Fitting, Sleeve, Coupling, Flareless
SAE AS5961 Hose Assembly, Polytetrafluoroethylene Cres Braid Reinforced, 400°F, 5080 psi Flareless, Straight to Straight
SAE MA5405/1 Splice, Fiber Optic, Aerospace Inter-Connect, Grade Index 100/140/172 Cable Size
SAE AS9705 Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .190-32 UNJF
SAE AMS3376 Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant
SAE AMS4004 Aluminum Alloy, Foil, 2.5Mg - 0.25Cr (5052-H191), Strain Hardened
SAE AMS4079 Aluminum Alloy, Drawn, Round, Seamless, Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O), Close Tolerance,
SAE AMS4077 Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Annealed
SAE AMS4470 Aluminum Alloy, Plate (7085-T7451), 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr, Solution Heat Treated, Stress-Relieved,
SAE AMS4701 Copper Wire, Oxygen-Free, 99.95 (Cu+Ag), Annealed
SAE AMS4845 Tin Bronze Castings, Sand and Centrifugal, 87.5Cu - 10Sn - 2Zn, As Cast
SAE AMS5387 Alloy, Corrosion and Heat Resistant, Investment Castings, 60Co - 29Cr - 4.5W, As Cast
SAE AMS5812 Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr - 7.1Ni - 2.4Mo - 1.0Al, Vacuum Induction Melted
SAE AMS5831 Alloy, Corrosion and Heat-Resistant, Welding Wire, 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.3
SAE AMS5836 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb)
SAE AMS5895 Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti
SAE AMS5355 Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution
SAE AMS4190 Aluminum Alloy, Welding Wire 5.2Si (4043)

用户评论(共0条评论)

  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容: