资料描述
MIL-PRF-28861C (W/AMENDMENT 1), PERFORMANCE SPECIFICATION: FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR (22 JUN 2005)., This specification covers the general requirements for low-pass filter and capacitors used to suppress radio frequency/electromagnetic interference. Filters furnished to the requirements of this specification contain shunting ceramic discoidal capacitors and series inductors (FSC 5915). Capacitors furnished to the requirements of this specification contain shunting ceramic discoidal capacitors (FSC 5910). For the purposes of this specification, feed-through capacitor types (C circuit configuration) are referred to herein as a filter. Passband power may be alternating current (ac) or direct current (dc) and the filters used primarily in the reduction of broadband radio frequency interference. This specification provides for two levels of product assurance requirements. Filters covered by this specification are capable of operation over the temperature range of -55?C to +125?C.
MIL-PRF-28861/12F
MIL-PRF-28861/12F, PERFORMANCE SPECIFICATION SHEET: FILTERS, AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE, SUPPRESSION, HERMETICALLY SEALED ON ONE END ONLY, STYLE FS70 (14 FEB 2008)., The complete requirements for acquiring the filters des
MIL-PRF-28800F
MIL-PRF-28800F, PERFORMANCE SPECIFICATION: TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (24 JUN 1996) (S/S BY MIL-T-28800E)., This specification covers the general requirements for test equipment (see 6.5.2.14
MIL-PRF-28776D
MIL-PRF-28776D, PERFORMANCE SPECIFICATION, RELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (26 SEP 2005) [SUPERSEDING MIL-R28776B]., This specification establishes the general requirements for relays that use a combination of solid stat
MIL-PRF-28750/8C
MIL-PRF-28750/8C, PERFORMANCE SPECIFICATION SHEET, RELAY, SOLID-STATE, HERMETICALLY SEALED, CLASS II, OPTICALLY ISOLATED, 600mA, 50 V dc, SIGNAL SWITCHING, SPST(N.O,) (1 FEB 1999)., This specification is approved for use by all Departments and Agencies of
MIL-PRF-28523c HOSE ASSEMBLY
MIL-PRF-28523c HOSE ASSEMBLY, RUBBER, HYDRAULIC, AND PNEUMATIC, JETTING (400 PSI WORKING PRESSURE). This specification covers rubber hose assemblies for hydraulic and pneumatic jetting in pile driving, rock drilling, and air compressor use. Hose covered b
MIL-PRF-28002C
MIL-PRF-28002C, PERFORMANCE SPECIFICATION RASTER GRAPHICS REPRESENTATION IN BINARY FORMAT, REQUIREMENTS FOR (30 SEP 1997)., This specification identifies the requirements to be met when raster data represented in digital, binary format are delivered to th
MIL-PRF-28001C
MIL-PRF-28001C, PERFORMANCE SPECIFICATION MARKUP REQUIREMENTS AND GENERIC STYLE SPECIFICATION FOR EXCHANGE OF TEXT AND ITS PRESENTATION (2 MAY 1997)., To set forth the overall requirements for the creation and management of Standard Generalized Markup Lan
MIL-PRF-28000B
MIL-PRF-28000B, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (30 SEP 1999)., This specification identifies the requirements to be met when product definition da
MIL-PRF-28000A (AMENDMENT 1)
MIL-PRF-28000A (AMENDMENT 1), PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (14 DEC 1992)., To all holders of MIL-PRF-28000A, make the following pen and ink chan
MIL-PRF-28000A
MIL-PRF-28000A, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (10 FEB 1992)., This specification identifies the requirements to be met when product definition da
MIL-PRF-28861C
MIL-PRF-28861C, PERFORMANCE SPECIFICATION: FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR (30 MAR 2004)., This specification covers the general requirements for low-pass filter and capacitors us
MIL-PRF-28861B (SUPPLEMENT 1A)
MIL-PRF-28861B (SUPPLEMENT 1A), PERFORMANCE SPECIFICATION: FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR (08 JUL 1998)., This supplement forms a part of MIL-PRF-28861B, dated 31 January 1994.
MIL-PRF-28861B (AMENDMENT 4)
MIL-PRF-28861B (AMENDMENT 4), PERFORMANCE SPECIFICATION: FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR (11 SEP 1998)., This amendment forms a part of MIL-PRF-28861B, dated 31 January 1994, and
MIL-PRF-28861B
MIL-PRF-28861B, PERFORMANCE SPECIFICATION: FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR (31 JAN 1994) [SUPERSEDING MIL-F-28861A]., This specification covers the general requirements for low-pa
MIL-PRF-28861/12F
MIL-PRF-28861/12F, PERFORMANCE SPECIFICATION SHEET: FILTERS, AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE, SUPPRESSION, HERMETICALLY SEALED ON ONE END ONLY, STYLE FS70 (14 FEB 2008)., The complete requirements for acquiring the filters des
MIL-PRF-28800F
MIL-PRF-28800F, PERFORMANCE SPECIFICATION: TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR (24 JUN 1996) (S/S BY MIL-T-28800E)., This specification covers the general requirements for test equipment (see 6.5.2.14
MIL-PRF-28776D
MIL-PRF-28776D, PERFORMANCE SPECIFICATION, RELAYS, HYBRID, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (26 SEP 2005) [SUPERSEDING MIL-R28776B]., This specification establishes the general requirements for relays that use a combination of solid stat
MIL-PRF-28750/8C
MIL-PRF-28750/8C, PERFORMANCE SPECIFICATION SHEET, RELAY, SOLID-STATE, HERMETICALLY SEALED, CLASS II, OPTICALLY ISOLATED, 600mA, 50 V dc, SIGNAL SWITCHING, SPST(N.O,) (1 FEB 1999)., This specification is approved for use by all Departments and Agencies of
MIL-PRF-28523c HOSE ASSEMBLY
MIL-PRF-28523c HOSE ASSEMBLY, RUBBER, HYDRAULIC, AND PNEUMATIC, JETTING (400 PSI WORKING PRESSURE). This specification covers rubber hose assemblies for hydraulic and pneumatic jetting in pile driving, rock drilling, and air compressor use. Hose covered b
MIL-PRF-28002C
MIL-PRF-28002C, PERFORMANCE SPECIFICATION RASTER GRAPHICS REPRESENTATION IN BINARY FORMAT, REQUIREMENTS FOR (30 SEP 1997)., This specification identifies the requirements to be met when raster data represented in digital, binary format are delivered to th
MIL-PRF-28001C
MIL-PRF-28001C, PERFORMANCE SPECIFICATION MARKUP REQUIREMENTS AND GENERIC STYLE SPECIFICATION FOR EXCHANGE OF TEXT AND ITS PRESENTATION (2 MAY 1997)., To set forth the overall requirements for the creation and management of Standard Generalized Markup Lan
MIL-PRF-28000B
MIL-PRF-28000B, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (30 SEP 1999)., This specification identifies the requirements to be met when product definition da
MIL-PRF-28000A (AMENDMENT 1)
MIL-PRF-28000A (AMENDMENT 1), PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (14 DEC 1992)., To all holders of MIL-PRF-28000A, make the following pen and ink chan
MIL-PRF-28000A
MIL-PRF-28000A, PERFORMANCE SPECIFICATION DIGITAL REPRESENTATION FOR COMMUNICATION OF PRODUCT DATA: IGES APPLICATION SUBSETS AND IGES APPLICATION PROTOCOLS (10 FEB 1992)., This specification identifies the requirements to be met when product definition da
MIL-PRF-27617F
MIL-PRF-27617F, PERFORMANCE SPECIFICATION: GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT (17 FEB 1998) [SUPERSEDING MIL-G-2617E]., This specification covers the requirements for greases resistant to hydrocarbon fuel and liquid oxygen and fo
MIL-PRF-27415B
MIL-PRF-27415B, PERFORMANCE SPECIFICATION, PROPELLANT PRESSURIZING AGENT, ARGON (8 FEB 2007) [SUPERSEDING MIL-P-27415]., This specification covers the requirements for two grades and two types of argon.
MIL-PRF-27407C
MIL-PRF-27407C, PERFORMANCE SPECIFICATION: PROPELLANT PRESSURIZING AGENT, HELIUM (29 NOV 2006)., This specification covers the requirements for two grades and two types of helium.
MIL-PRF-27407B
MIL-PRF-27407B, PERFORMANCE SPECIFICATION: PROPELLANT PRESSURIZING AGENT, HELIUM (25 AUG 1997) [SUPERSEDING MIL-P-27407A]., This specification covers the requirements for two grades and two types of helium.
MIL-PRF-27404C
MIL-PRF-27404C, PERFORMANCE SPECIFICATION: PROPELLANT, MONOMETHYLHYDRAZINE (1 OCT 1997) [SUPERSEDING MIL-P-27404B]., This specification covers the requirements for monomethylhydrazine (N2H3CH3) propellant.
MIL-PRF-27402C
MIL-PRF-27402C, PERFORMANCE SPECIFICATION: PROPELLANT, HYDRAZINE uns-DIMETHYLHYDRAZINE (50% N2H4 - 50% UDMH) [SUPERSEDING MIL-P-27402B]., This specification covers the requirements for hydrazine - uns-dimethylhydrazine (N2H4 - UDMH) propellant.