当前位置: 首页 > 美军标 MIL > MIL-PRF > MIL-PRF-23236C
MIL-PRF-23236C

MIL-PRF-23236C

prev next

  • 商品货号:INFOEACH_887
  • 商品品牌:美军标 MIL
    商品重量:0克
  • 上架时间:2021-10-22
    商品点击数:5759
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

MIL-PRF-23236C, PERFORMANCE SPECIFICATION: COATING SYSTEMS FOR SHIP STRUCTURES (12 AUG 2003)., This specification covers five types of air pollution regulated ship and structure coatings that comply with the National Emission Standards for Hazardous Air Pollutants (NESHAP) for shipbuilding for state and federal regulations (except Type VIII and VIIIA). There are 17 classes of coating systems. There are four grades of coating systems based on temperature of application and cure. In addition to tanks, all paint systems qualified to this specification are suitable for use on any ship structures, interior or exterior, for corrosion control. Except for trace levels, all types are free of Lead, Chromium, Cadmium, and Asbestos (see 3.2.3). All types, except type IV, have levels of hazardous air pollutants (HAPs) that do not exceed applicable NESHAP levels (see 3.2.2). Dry Type V, VI, VII and VIII coating residues and debris are non-hazardous waste under U.S. Environmental Protection Agency (USEPA) regulations in effect on the date of this specification. Type VII coating will not have any solvent added to either the base resin component or the hardener component.

标签

相关资料

  • MIL-PRF-23199E

    MIL-PRF-23199E, PERFORMANCE SPECIFICATION: PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS (28 FEB 1997)., This specification covers the requirements for packaging, packing, and marking of mechanical componen

  • MIL-PRF-23199D

    MIL-PRF-23199D, PERFORMANCE SPECIFICATION: PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS (18 NOV 1992)., This specification covers the requirements for packaging, packing, and marking of mechanical componen

  • MIL-PRF-23199/1 (REV. A)

    MIL-PRF-23199/1 (REV. A), PERFORMANCE SPECIFICATION: PACKAGING, PACKING & MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION & CONTROL EQUIPMENT (28 FEB 2003)., This specification covers the requirements for packaging, packing, and marking of Instrumentation

  • MIL-PRF-22885G (SUPPLEMENT 1)

    MIL-PRF-22885G (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: SWITCHES, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR (21 JAN 2005) [SUPERSEDING MIL-S-22885E]., This supplement forms a part of MIL-PRF-22885G, dated 21 January 2005.

  • MIL-PRF-22885F (AMENDMENT 2)

    MIL-PRF-22885F (AMENDMENT 2), PERFORMANCE SPECIFICATION: SWITCHES, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR (9 AUG 2000) [SUPERSEDING MIL-S-22885E]., This amendment forms a part of MIL-PRF-22885F, dated 23 January 1998, and is approved for use

  • MIL-PRF-22885/99B

    MIL-PRF-22885/99B, PERFORMANCE SPECIFICATION SHEET, SWITCH, PUSHBUTTON, ILLUMINATED, PUSH BUTTONS FOR (SNAP-IN AND SCREW-IN) (1 MAR 2001)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The requiremen

  • MIL-PRF-22885/80F

    MIL-PRF-22885/80F, PERFORMANCE SPEFICATION SHEET, SWITCH, PUSHBUTTON, ILLUMINATED, 4-LAMP SOLID MOUNT, RFI SHIELDED, MOISTURE SEALED, HIGH IMPACT SHOCK RESISTANT (17 MAR 1999)., This specification is approved for use by all Departments and Agencies of the

  • MIL-PRF-22885/18H

    MIL-PRF-22885/18H, PERFORMANCE SPECIFICATION SHEET, SWITCH, PUSH BUTTON, ILLUMINATED, DRIPPROOF SEAL, MOMENTARY AND ALTERNATE ACTION (DPDT/TWO CIRCUIT - 2 AMPERES) (1 MAR 2001)., This specification sheet is approved for use by all Departments and Agencies

  • MIL-PRF-22885/13J

    MIL-PRF-22885/13J, PERFORMANCE SPECIFICATION SHEET, SWITCH, SUBASSEMBLY, BOOT, DRIP PROOF PANEL SEAL (FOR ILLUMINATED PUSH BUTTON SWITCH) (17 MAR 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense.

  • MIL-PRF-22885/108E

    MIL-PRF-22885/108E, PERFORMANCE SPECIFICATION SHEET: SWITCHES, PUSHBUTTON, ILLUMINATED, 4-LAMP REPLACEABLE INCANDESCENT OR NON-REPLACEABLE LIGHT EMITTING DIODE (LED), 0.750 SQUARE, SPDT, DPDT, 4PDT SILVER CONTACTS - 2 CIRCUIT (5 AMPERES) OR SPDT (7.5 AMPE

  • MIL-PRF-22750F

    MIL-PRF-22750F, PERFORMANCE SPECIFICATION: COATING, EPOXY, HIGH-SOLIDS (31 MAY 1994) [SUPERSEDING MIL-C-22750E]., This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) cont

  • MIL-PRF-22684F

    MIL-PRF-22684F, PERFORMANCE SPECIFICATION, RESISTORS, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR (13 FEB 2006)., This specification covers the general requirements for insulated, film, fixed resistors of 2- and 5-percent resistance tolerance. These

  • MIL-PRF-22191F (AMENDMENT 1)

    MIL-PRF-22191F (AMENDMENT 1), PERFORMANCE SPECIFICATION: BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT-SEALABLE (26 OCT 2009) [SUPERSEDING MIL-B-22191D]., This specification establishes the requirements for transparent, flexible, heat-sealable barrier ma

  • MIL-PRF-22191F

    MIL-PRF-22191F, PERFORMANCE SPECIFICATION: BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT-SEALABLE (31 MAR 2008) [SUPERSEDING MIL-B-22191D]., This specification establishes the requirements for transparent, flexible, heat-sealable barrier materials having

  • MIL-PRF-22097J

    MIL-PRF-22097J, PERFORMANCE SPECIFICATION, RESISTOR, VARIABLE, NONWIREWOUND, (ADJUSTMENT TYPE) GENERAL SPECIFICATION FOR (27 JUL 2007)., This specification covers the general requirements for multiturn lead screw actuated and single turn nonwirewound, var

  • MIL-PRF-22019E

    MIL-PRF-22019E, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED (23 JUN 2006) [SUPERSEDING MIL-B-22019C]., This specification establishes the requirements for heat or pressure sealable, t

  • MIL-PRF-21260E

    MIL-PRF-21260E, PERFORMANCE SPECIFICATION, LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN (31 JUL 1998) [SUPERSEDING MIL-L-21260D]., This performance specification covers engine oils suitable for preservation, break-in, and lubrication

  • MIL-PRF-21038E

    MIL-PRF-21038E, PERFORMANCE SPECIFICATION SHEET, TRANSFORMERS, PULSE, LOWER POWER GENERAL SPECIFICATION FOR (8 JUL 1998), This specification COVERS the general requirements for low-powers pulse transformers.

  • MIL-PRF-21038/27E

    MIL-PRF-21038/27E, PERFORMANCE SPECIFICATION SHEET, TRANSFORMERS, PULSE, LOWER POWER (8 JUL 1998), This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described he

  • MIL-PRF-20696F

    MIL-PRF-20696F, PERFORMANCE SPECIFICATION CLOTH, CLOTH, WATERPROOF, WEATHER RESISTANT (2 SEP 1997)., This specification covers the requirements for four types and four classes of weather resistant, waterproof cloth.