资料描述
MIL-PRF-22097J, PERFORMANCE SPECIFICATION, RESISTOR, VARIABLE, NONWIREWOUND, (ADJUSTMENT TYPE) GENERAL SPECIFICATION FOR (27 JUL 2007)., This specification covers the general requirements for multiturn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator. These resistors are capable of full load operation (where maximum resistance is engaged) at a maximum ambient temperature of 70OC and 85OC, and are capable for continuous operation when properly derated, at a maximum temperature of 125OC and 150OC (see figure 1). These resistors have a resistance of ±10 percent (see 3.1).
MIL-PRF-22885/80F
MIL-PRF-22885/80F, PERFORMANCE SPEFICATION SHEET, SWITCH, PUSHBUTTON, ILLUMINATED, 4-LAMP SOLID MOUNT, RFI SHIELDED, MOISTURE SEALED, HIGH IMPACT SHOCK RESISTANT (17 MAR 1999)., This specification is approved for use by all Departments and Agencies of the
MIL-PRF-22885/18H
MIL-PRF-22885/18H, PERFORMANCE SPECIFICATION SHEET, SWITCH, PUSH BUTTON, ILLUMINATED, DRIPPROOF SEAL, MOMENTARY AND ALTERNATE ACTION (DPDT/TWO CIRCUIT - 2 AMPERES) (1 MAR 2001)., This specification sheet is approved for use by all Departments and Agencies
MIL-PRF-22885/13J
MIL-PRF-22885/13J, PERFORMANCE SPECIFICATION SHEET, SWITCH, SUBASSEMBLY, BOOT, DRIP PROOF PANEL SEAL (FOR ILLUMINATED PUSH BUTTON SWITCH) (17 MAR 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense.
MIL-PRF-22885/108E
MIL-PRF-22885/108E, PERFORMANCE SPECIFICATION SHEET: SWITCHES, PUSHBUTTON, ILLUMINATED, 4-LAMP REPLACEABLE INCANDESCENT OR NON-REPLACEABLE LIGHT EMITTING DIODE (LED), 0.750 SQUARE, SPDT, DPDT, 4PDT SILVER CONTACTS - 2 CIRCUIT (5 AMPERES) OR SPDT (7.5 AMPE
MIL-PRF-22750F
MIL-PRF-22750F, PERFORMANCE SPECIFICATION: COATING, EPOXY, HIGH-SOLIDS (31 MAY 1994) [SUPERSEDING MIL-C-22750E]., This specification covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) cont
MIL-PRF-22684F
MIL-PRF-22684F, PERFORMANCE SPECIFICATION, RESISTORS, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR (13 FEB 2006)., This specification covers the general requirements for insulated, film, fixed resistors of 2- and 5-percent resistance tolerance. These
MIL-PRF-22191F (AMENDMENT 1)
MIL-PRF-22191F (AMENDMENT 1), PERFORMANCE SPECIFICATION: BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT-SEALABLE (26 OCT 2009) [SUPERSEDING MIL-B-22191D]., This specification establishes the requirements for transparent, flexible, heat-sealable barrier ma
MIL-PRF-22191F
MIL-PRF-22191F, PERFORMANCE SPECIFICATION: BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, HEAT-SEALABLE (31 MAR 2008) [SUPERSEDING MIL-B-22191D]., This specification establishes the requirements for transparent, flexible, heat-sealable barrier materials having
MIL-PRF-22097J
MIL-PRF-22097J, PERFORMANCE SPECIFICATION, RESISTOR, VARIABLE, NONWIREWOUND, (ADJUSTMENT TYPE) GENERAL SPECIFICATION FOR (27 JUL 2007)., This specification covers the general requirements for multiturn lead screw actuated and single turn nonwirewound, var
MIL-PRF-22019E
MIL-PRF-22019E, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED (23 JUN 2006) [SUPERSEDING MIL-B-22019C]., This specification establishes the requirements for heat or pressure sealable, t
MIL-PRF-22019E
MIL-PRF-22019E, PERFORMANCE SPECIFICATION, BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED (23 JUN 2006) [SUPERSEDING MIL-B-22019C]., This specification establishes the requirements for heat or pressure sealable, t
MIL-PRF-21260E
MIL-PRF-21260E, PERFORMANCE SPECIFICATION, LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN (31 JUL 1998) [SUPERSEDING MIL-L-21260D]., This performance specification covers engine oils suitable for preservation, break-in, and lubrication
MIL-PRF-21038E
MIL-PRF-21038E, PERFORMANCE SPECIFICATION SHEET, TRANSFORMERS, PULSE, LOWER POWER GENERAL SPECIFICATION FOR (8 JUL 1998), This specification COVERS the general requirements for low-powers pulse transformers.
MIL-PRF-21038/27E
MIL-PRF-21038/27E, PERFORMANCE SPECIFICATION SHEET, TRANSFORMERS, PULSE, LOWER POWER (8 JUL 1998), This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described he
MIL-PRF-20696F
MIL-PRF-20696F, PERFORMANCE SPECIFICATION CLOTH, CLOTH, WATERPROOF, WEATHER RESISTANT (2 SEP 1997)., This specification covers the requirements for four types and four classes of weather resistant, waterproof cloth.
MIL-PRF-20042E
MIL-PRF-20042E, PERFORMANCE SPECIFICATION: FLANGE, PIPE , BRONZE (SILVER BRAZING) (16 SEP 1999) [SUPERSEDING MIL-F-20042D]., This specification covers 50, 100, 150, 250, and 400 pound silver brazing bronze pipe flanges for use with water, oil, gas, or ste
MIL-PRF-1M (AMENDMENT 1)
MIL-PRF-1M (AMENDMENT 1),PERFORMANCE SPECIFICATION ELECTRON TUBES, GENERAL SPECIFICATION FOR (10 NOV 2005).
MIL-PRF-19978J
MIL-PRF-19978J, PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC (HERMETICALLY SEALED IN METAL, CERAMIC OR GLASS CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (25 MAR 2003) [SUPERSEDING M
MIL-PRF-19565C (AMENDMENT 1)
MIL-PRF-19565C (AMENDMENT 1), PERFORMANCE SPECIFICATION COATING COMPOUNDS, THERMAL INSULATION, FIRE- AND WATER-RESISTANT, VAPOR-BARRIER (8 APR 1988) [SUPERSEDING MIL-C-19565C].
MIL-PRF-19565C
MIL-PRF-19565C, PERFORMANCE SPECIFICATION, COATING COMPOUNDS, THERMAL INSULATION, FIRE- AND WATER-RESISTANT, VAPOR-BARRIER (23 DEC 1980)., This specification covers an interior vapor-barrier coating for insulated refrigerant and chilled water lines.
MIL-PRF-19500N
MIL-PRF-19500N, PERFORMANCE SPECIFICATION: SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR (30 NOV 2005)., This specification establishes the general performance requirements for semiconductor devices. Detail requirements and characteristics are specifie
MIL-PRF-19500M
MIL-PRF-19500M, PERFORMANCE SPECIFICATION: SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR (22 OCT 1999)., This specification establishes the general performance requirements for semiconductor devices. Detail requirements and characteristics are specifie
MIL-PRF-19500L
MIL-PRF-19500L, PERFORMANCE SPECIFICATION SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR (22 OCT 1998)., This specification establishes the general performance requirements for semiconductor devices. Detail requirements and characteristics are specified
MIL-PRF-19500/548F
MIL-PRF-19500/548F, PERFORMANCE SPECIFICATION SHEET, COUPLER, OPTO ELECTRONIC, SEMICONDUCTOR DEVICE, SOLID STATE, TYPES 4N47, 4N48, 4N49, 4N47A, 4N48A, 4N49A, 4N47U, 4N48U, 4N49U, 4N47BU, 4N48BU, AND 4N49BU, JAN, JANTX, JANTXV, AND JANS (15 SEP 2005)., Th
MIL-PRF-19207F (SUPPLEMENT 1)
MIL-PRF-19207F (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (15 MAY 2007)., This supplement forms a part of MIL-PRF-19207F, dated 15 May 2007.
MIL-PRF-19207F
MIL-PRF-19207F, PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (15 MAY 2007)., This specification covers the general requirements for enclosed, panel mounted, extractor post
MIL-PRF-19207E (SUPPLEMENT 1)
MIL-PRF-19207E (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (01 MAR 1999)., This supplement forms a part of MIL-PRF-19207E, dated 1 March 1999.
MIL-PRF-19207E (NOTICE 1)
MIL-PRF-19207E (NOTICE 1), PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (15 JUN 2004)., MIL-PRF-19207E, dated 1 March 1999, has been reviewed and determined to be valid fo
MIL-PRF-19207E
MIL-PRF-19207E, PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (01 MAR 1999)., This specification covers the general requirements for enclosed, panel mounted, extractor post
MIL-PRF-19207D
MIL-PRF-19207D, PERFORMANCE SPECIFICATION: FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE,INDICATING AND NON-INDICATING, GENERAL SPECIFICATION FOR (23 AUG 1991) (SUPERSEDING MIL-F-19207C)., This specification covers the general requirements for enclosed, pa