资料描述
MIL-PRF-17331J, PERFORMANCE SPECIFICATION, LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE (9 SEP 2003) [SUPERSEDING MIL-L-17331G]., This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, for use in main and auxiliary turbines and gears, air compressors, and certain hydraulic equipment, as well as for general mechanical lubrication.
MIL-PRF-17951E(SH)
MIL-PRF-17951E(SH), PERFORMANCE SPECIFICATION, DECK COVERING, LIGHTWEIGHT, NONSLIP, ABRASIVE PARTICLE COATED FABRIC, FILM, OR COMPOSITE, AND SEALING COMPOUND (20 JULY 1988)., This specification establishes the requirements for a self-adhering, nonslip dec
MIL-PRF-17951E (AMENDMENT 2)
MIL-PRF-17951E (AMENDMENT 2), MILITARY SPECIFICATION, DECK COVERING, LIGHTWEIGHT, NONSLIP, ABRASIVE PARTICLE COATED FABRIC, FILM, OR COMPOSITE AND SEALING COMPOUND (17 SEP 1992) [SUPERSEDING MIL-D-17951E]., This amendment forms a part of MIL-D-17951E(SH),
MIL-PRF-17927D
MIL-PRF-17927D, PERFORMANCE SPECIFICATION, GASKETS, FLAME RESISTANT HINGED CLOSURE (27 SEP 2004) [SUPERSEDING MIL-G-17927C]., This specification covers gaskets for use on hinged closures where flame resistance and fume containment are required.
MIL-PRF-17773C
MIL-PRF-17773C, PERFORMANCE SPECIFICATION: SWITCHES, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC AND MANUAL (21 NOV 2006) [SUPERSEDING DOD-S-17773B]., This specification covers the Automatic Bus Transfer Switch (ABT) (see 6.4.1) and the Manual Bus Transfer Sw
MIL-PRF-17672D (AMENDMENT 3)
MIL-PRF-17672D (AMENDMENT 3),PERFORMANCE SPECIFICATION, HYDRAULIC FLUID, PETROLEUM, INHIBITED (31 MAY 1995) [SUPERSEDING MIL-H-17672C].
MIL-PRF-17672D
MIL-PRF-17672D,PERFORMANCE SPECIFICATION, HYDRAULIC FLUID, PETROLEUM, INHIBITED (23 JAN 1984) [SUPERSEDING MIL-H-17672C]., This specification covers petroleum base hydraulic fluids containing anticorrosion and antioxidation additives for use in hydraulic
MIL-PRF-17331J(SH) (W/ AMENDMENT 1)
MIL-PRF-17331J(SH) (W/ AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE (30 MAR 2007)., This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, for us
MIL-PRF-17331J
MIL-PRF-17331J, PERFORMANCE SPECIFICATION, LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE (9 SEP 2003) [SUPERSEDING MIL-L-17331G]., This specification covers a single classification of steam turbine and gear lubricating oil, moderate service, f
MIL-PRF-16173E (W/INTERIM AMENDMENT 1)
MIL-PRF-16173E (W/INTERIM AMENDMENT 1), PERFORMANCE SPECIFICATION: CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (7 SEP 2006) [SUPERSEDING MIL-PRF-16173]., This specification covers solvent-dispersed corrosion preventive compounds that
MIL-PRF-16173E
MIL-PRF-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (6 JAN 1993)., This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporatio
MIL-PRF-16005F
MIL-PRF-16005F, PERFORMANCE SPECIFICATION: PROPELLANT HYDROGEN PEROXIDE (1 AUG 2003)., . This specification covers four types and two grades of hydrogen peroxide propellant.
MIL-PRF-15733H (w/AMENDMENT 3)
MIL-PRF-15733H (w/AMENDMENT 3), PERFORMANCE SPECIFICATION, FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)., This specification covers the general requirements for low-pass filters and capacitors used to suppr
MIL-PRF-15733 (AMENDMENT 3)
MIL-PRF-15733 (AMENDMENT 3), PERFORMANCE SPECIFICATION FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)., This specification covers the general requirements for low-pass filters and capacitors used to suppress
MIL-PRF-15624F
MIL-PRF-15624F, PERFORMANCE SPECIFICATION: GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM) (25 MAY 1994)., This specification establishes the requirements for synthetic rubber materials for gaskets 50 durometer hardness maximum.
MIL-PRF-15160/3F
MIL-PRF-15160/3F, PERFORMANCE SPECIFICATION SHEET, FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F03 (12 OCT 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for
MIL-PRF-15160/2F
MIL-PRF-15160/2F, PERFORMANCE SPECIFICATION SHEET, FUSES, INSTRUMENT, POWER, AND TELEPHONE (NON-INDICATING), STYLE F02 (12 OCT 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo
MIL-PRF-14977C
MIL-PRF-14977C, PERFORMANCE SPECIFICATION: SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET (18 JUN 1997) [SUPERSEDING MIL-S-14977A]., This specification covers the quality assurance provisions and special requirements not covered by the drawings for one type of
MIL-PRF-14977B
MIL-PRF-14977B, PERFORMANCE SPECIFICATION: SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET (18 SEP 1992) [SUPERSEDING MIL-S-14977A]., This specification covers the quality assurance provisions and special requirements not covered by the drawings for one type of
MIL-PRF-14107D
MIL-PRF-14107D, PERFORMANCE SPECIFICATION, LUBRICATING OIL, WEAPONS, LOW TEMPERATURE (20 OCT 2000) [SUPERSEDING MIL-L-14107C]., This specification covers a preservative lubricating oil for aircraft and ground small arms weapons at emperatures between 0 de
MIL-PRF-13830B (NOTICE 2)
MIL-PRF-13830B (NOTICE 2), PERFORMANCE SPECIFICATION: OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE, AND INSPECTION (07 JAN 2000) [SUPERSEDING MIL-O-13830A]., MIL-PRF-13830 B, dated 9 January 19
MIL-PRF-13830B
MIL-PRF-13830B, PERFORMANCE SPECIFICATION: OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE, AND INSPECTION (9 JAN 1997) [SUPERSEDING MIL-O-13830A]., This specification covers the manufacture, asse
MIL-PRF-13789E
MIL-PRF-13789E, PERFORMANCE SPECIFICATION, STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE (1 FEB 1999)., This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material fro
MIL-PRF-13714E
MIL-PRF-13714E, DETAIL SPECIFICATION: TRAILER, UTILITY, CABLE REEL, 3.5 TON, M31 (31 OCT 1996) [SUPERSEDED BY MIL-DTL-13714F] [SUPERSEDING MIL-T-13714D]., This specification covers one type of trailer for use as a tactical military vehicle under extreme o
MIL-PRF-12934K (SUPPLEMENT 1)
MIL-PRF-12934K (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (14 APR 2004)., This supplement forms a part of MIL-PRF-12934K, dated 14 April 2004.
MIL-PRF-12934K
MIL-PRF-12934K, PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (14 APR 2004)., This specification covers the general requirements for precision, wire-wound, variable resistors whose electrical output (in t
MIL-PRF-12934J (SUPPLEMENT 1)
MIL-PRF-12934J (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (1 FEB 1999) [SUPERSEDING MIL-R-12934H]., This supplement forms a part of MIL-PRF-12934J, dated 1 February 1999.
MIL-PRF-12934J
MIL-PRF-12934J, PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (1 FEB 1999) [SUPERSEDING MIL-R-12934H]., This specification covers the general requirements for precision, wire-wound, variable resistors who
MIL-PRF-12883E (SUPPLEMENT 1)
MIL-PRF-12883E (SUPPLEMENT 1), SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR (11 JUN 2001) [SUPERSEDING MIL-S-12883D] [S/S BY MIL-DTL-12883F]., This supplement forms a part of MIL-PRF-12883E, dated 22 April 1995.