MIL-PRF-16173E (W/INTERIM AMENDMENT 1)

MIL-PRF-16173E (W/INTERIM AMENDMENT 1), PERFORMANCE SPECIFICATION: CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (7 SEP 2006) [SUPERSEDING MIL-PRF-16173]., This specification covers solvent-dispersed corrosion preventive compounds that

MIL-PRF-16173E

MIL-PRF-16173E, PERFORMANCE SPECIFICATION CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (6 JAN 1993)., This specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporatio

MIL-PRF-16005F

MIL-PRF-16005F, PERFORMANCE SPECIFICATION: PROPELLANT HYDROGEN PEROXIDE (1 AUG 2003)., . This specification covers four types and two grades of hydrogen peroxide propellant.

MIL-PRF-16005F

MIL-PRF-16005F, PERFORMANCE SPECIFICATION: PROPELLANT HYDROGEN PEROXIDE (1 AUG 2003)., . This specification covers four types and two grades of hydrogen peroxide propellant.

MIL-PRF-15733H (w/AMENDMENT 3)

MIL-PRF-15733H (w/AMENDMENT 3), PERFORMANCE SPECIFICATION, FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)., This specification covers the general requirements for low-pass filters and capacitors used to suppr

MIL-PRF-15733 (AMENDMENT 3)

MIL-PRF-15733 (AMENDMENT 3), PERFORMANCE SPECIFICATION FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR (31 JAN 2007)., This specification covers the general requirements for low-pass filters and capacitors used to suppress

MIL-PRF-15624F

MIL-PRF-15624F, PERFORMANCE SPECIFICATION: GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM) (25 MAY 1994)., This specification establishes the requirements for synthetic rubber materials for gaskets 50 durometer hardness maximum.

MIL-PRF-15160/3F

MIL-PRF-15160/3F, PERFORMANCE SPECIFICATION SHEET, FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F03 (12 OCT 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for

MIL-PRF-15160/2F

MIL-PRF-15160/2F, PERFORMANCE SPECIFICATION SHEET, FUSES, INSTRUMENT, POWER, AND TELEPHONE (NON-INDICATING), STYLE F02 (12 OCT 1999)., This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo

MIL-PRF-14977C

MIL-PRF-14977C, PERFORMANCE SPECIFICATION: SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET (18 JUN 1997) [SUPERSEDING MIL-S-14977A]., This specification covers the quality assurance provisions and special requirements not covered by the drawings for one type of

MIL-PRF-14977B

MIL-PRF-14977B, PERFORMANCE SPECIFICATION: SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET (18 SEP 1992) [SUPERSEDING MIL-S-14977A]., This specification covers the quality assurance provisions and special requirements not covered by the drawings for one type of

MIL-PRF-14107D

MIL-PRF-14107D, PERFORMANCE SPECIFICATION, LUBRICATING OIL, WEAPONS, LOW TEMPERATURE (20 OCT 2000) [SUPERSEDING MIL-L-14107C]., This specification covers a preservative lubricating oil for aircraft and ground small arms weapons at emperatures between 0 de

MIL-PRF-13830B (NOTICE 2)

MIL-PRF-13830B (NOTICE 2), PERFORMANCE SPECIFICATION: OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE, AND INSPECTION (07 JAN 2000) [SUPERSEDING MIL-O-13830A]., MIL-PRF-13830 B, dated 9 January 19

MIL-PRF-13830B

MIL-PRF-13830B, PERFORMANCE SPECIFICATION: OPTICAL COMPONENTS FOR FIRE CONTROL INSTRUMENTS; GENERAL SPECIFICATION GOVERNING THE MANUFACTURE, ASSEMBLE, AND INSPECTION (9 JAN 1997) [SUPERSEDING MIL-O-13830A]., This specification covers the manufacture, asse

MIL-PRF-13789E

MIL-PRF-13789E, PERFORMANCE SPECIFICATION, STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE (1 FEB 1999)., This specification covers single element basket-type sediment strainers from 0.75 to 12.00-inch nominal pipe size, for the removal of foreign material fro

MIL-PRF-13714E

MIL-PRF-13714E, DETAIL SPECIFICATION: TRAILER, UTILITY, CABLE REEL, 3.5 TON, M31 (31 OCT 1996) [SUPERSEDED BY MIL-DTL-13714F] [SUPERSEDING MIL-T-13714D]., This specification covers one type of trailer for use as a tactical military vehicle under extreme o

MIL-PRF-12934K (SUPPLEMENT 1)

MIL-PRF-12934K (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (14 APR 2004)., This supplement forms a part of MIL-PRF-12934K, dated 14 April 2004.

MIL-PRF-12934K

MIL-PRF-12934K, PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (14 APR 2004)., This specification covers the general requirements for precision, wire-wound, variable resistors whose electrical output (in t

MIL-PRF-12934J (SUPPLEMENT 1)

MIL-PRF-12934J (SUPPLEMENT 1), PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (1 FEB 1999) [SUPERSEDING MIL-R-12934H]., This supplement forms a part of MIL-PRF-12934J, dated 1 February 1999.

MIL-PRF-12934J

MIL-PRF-12934J, PERFORMANCE SPECIFICATION: RESISTORS, VARIABLE, WIRE WOUND, PRECISION, GENERAL SPECIFICATION FOR (1 FEB 1999) [SUPERSEDING MIL-R-12934H]., This specification covers the general requirements for precision, wire-wound, variable resistors who

MIL-PRF-12883E (SUPPLEMENT 1)

MIL-PRF-12883E (SUPPLEMENT 1), SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR (11 JUN 2001) [SUPERSEDING MIL-S-12883D] [S/S BY MIL-DTL-12883F]., This supplement forms a part of MIL-PRF-12883E, dated 22 April 1995.

MIL-PRF-12883E

MIL-PRF-12883E, SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR (28 MAY 1995) [SUPERSEDING MIL-S-12883D] [S/S BY MIL-DTL-12883F]., This specification covers the general requirements for sockets and socket accessories f

MIL-PRF-12647D

MIL-PRF-12647D, PERFORMANCE SPECIFICATION: PUMP, INFLATING-DEFLATING, HAND-OPERATED, AIR, SINGLE-CYLINDER PLUNGER (26 FEB 1996) [SUPERSEDING MIL-P-12647C]., This specification covers hand-operated, air inflation-deflation pumps with a single-cylinder plun