资料描述
【英文标准名称】: Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
【原文标准名称】: 使用声音清晰度指数在开放式空间对谈话保密性进行客观量度的标准试验方法
【标准号】: ASTM E1130-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: E33.02
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: architectural acoustics; articulation index; field test; open office; open office system; open-plan space; speech privacy; Acoustical tests; Ambient sound pressure levels; Attenuation; Band filter sets; Field testing--sound transmission; Filters/fil
【摘要】: The speech privacy between locations in an open plan space is determined by the degree to which intruding speech sounds exceed the ambient sound pressure levels at the listener''s ear; a classic signal-to-noise ratio situation. The sound pressure levels at the listener''s ear from intruding speech depend upon: The individual vocal effort and orientation of the talker, The attenuation of speech signals due to distance or intervening barriers, and The reinforcement of speech signals due to reflections from surfaces such as the ceiling, furniture panels, light fixtures, walls, or windows. The ambient sound pressure levels will often be controlled to mask intruding speech. This is accomplished by means of a masking sound system. However, in certain positions and frequency ranges, heating, ventilating, or air conditioning equipment (HVAC) may contribute significantly to ambient sound pressure levels. The primary purpose of this test method is to measure the speech privacy for an average speech spectrum using the standard Articulation Index method. This requires measurement of the relevant acoustical characteristics discussed in 5.2 and 5.3 for a pair of locations and calculation of the Articulation Index using an average speech spectrum. The average speech spectrum is for male talkers speaking with normal voice effort. The Articulation Index ranges from 0.00, where speech is unintelligible, to 1.00, where all individual spoken words can be understood. Caution should be exercised in interpreting the numerical results of this test method. There is a need for further research to establish the relationship of Articulation Index to speech privacy. One purpose of this test method is to encourage the measurement of data and further research on this topic perhaps leading to development of well-documented speech privacy categories and criteria. This test method can be used to: Compare the relative privacy afforded between different locations within open plan spaces. Evaluate how changes in open plan components (barriers, furniture, ceilings, masking sound, or wall panels) affect speech privacy. Measure speech privacy objectively for correlation with subjective responses. This test method could be one element of a performance or acceptance test procedure. However, many additional items would need to be specified to use this test method for performance testing of an open plan environment, such as, the number of locations to be tested and method of selecting those locations, and the method of averaging the results. Specifying a numerical criterion in terms of the Articulation Index is also necessary for acceptance testing; however, the selection of such a criterion and permissible deviations should be undertaken with care in view of the present state-of-the-art as discussed in 5.5.1.1 This test method describes a means of measuring speech privacy objectively between locations in open plan spaces. This test method relies upon acoustical measurements, published information on speech levels, and standard methods for assessing speech communication. This test method does not measure the performance of individual open plan components which affect speech privacy; it measures the privacy which results from a particular configuration of components (1, 2). 1.2 This test method is intended to be a field test for the measurement of speech privacy in actual open plan spaces. However, this test method could be used in an environment arranged to simulate an open plan space. 1.3 This test method is suitable for use in many open plan spaces such as open plan offices, healthcare spaces, institutional spaces, schools, etc. It is not applicable for measuring the speech privacy between open plan and enclosed spaces or between fully enclo......
【中国标准分类号】: P31
【国际标准分类号】: 17_140_01
【页数】: 6P.;A4
【正文语种】: 英语
ASTM C923M-2008b 在钢筋混凝土检修孔构造、管道和分支管道间的弹性连接件用标准规范(米制)
【英文标准名称】: Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
【原文标准名称】: 在钢筋混凝土检修孔构造、管道和分支管道间的弹性连接件用标准规范(米制)
【标准号】: ASTM C923M-2008b
ASTM F2230-2008 水中-冰情况下油泄漏的现场燃烧的标准指南
【英文标准名称】: Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
【原文标准名称】: 水中-冰情况下油泄漏的现场燃烧的标准指南
【标准号】: ASTM F2230-2008
【标准状态】: 现行
【国别】: 美国
ASTM C680-2008 用计算机程序估测绝热的平面系统、圆柱形和球形系统的表面温度及吸热或热损失的标准实施规范
【英文标准名称】: Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
【原文标准名称】: 用计算机程序估测绝热的平面系统、圆柱形和球形系统的表面温度及吸热或热损失的标准实施规
ASTM C1685-2008 工业用途的气动高温纤维隔热的标准规范
【英文标准名称】: Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
【原文标准名称】: 工业用途的气动高温纤维隔热的标准规范
【标准号】: ASTM C1685-2008
【标准状态】:
ASTM E2620-2008 方案和项目预算概要的标准分类
【英文标准名称】: Standard Classification for Program and Project Estimate Summaries
【原文标准名称】: 方案和项目预算概要的标准分类
【标准号】: ASTM E2620-2008
【标准状态】: 现行
【国别】: 美国
【发布日期
ASTM D6648-2008 使用弯曲束流变仪测定沥青粘结剂柔性蠕变硬度的试验方法
【英文标准名称】: Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
【原文标准名称】: 使用弯曲束流变仪测定沥青粘结剂柔性蠕变硬度的试验方法
【标准号】: ASTM D6648-2008
ASTM C1417-2008 工程定向设计用的加强的混凝土污水管,雨水排放管和涵洞管道制造规范
【英文标准名称】: Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
【原文标准名称】: 工程定向设计用的加强的混凝土污水管,雨水排放管和涵洞管道制造规范
【标准号】: ASTM C1417-2008
ASTM F679-2008 大直径聚氯乙烯(PVC)塑料重力污水管和配件的标准规范
【英文标准名称】: Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
【原文标准名称】: 大直径聚氯乙烯(PVC)塑料重力污水管和配件的标准规范
【标准号】: ASTM F679-2008
【标准状态】:
ASTM E2451-2008 从火灾残留碎片样本中保存可燃液体和可燃液体残留提取物的标准实施规程
【英文标准名称】: Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
【原文标准名称】: 从火灾残留碎片样本中保存可燃液体和可燃液体残留提取物的标准实施规程
【标准号】: ASTM E2451-2008
【
ASTM F2562/F2562M-2008 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范
【英文标准名称】: Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
【原文标准名称】: 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范
【标准号】: ASTM F2562/F2562M-2008
【
ASTM E2067-2008 完全氧燃烧热量测量火灾试验的标准实施规程
【英文标准名称】: Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
【原文标准名称】: 完全氧燃烧热量测量火灾试验的标准实施规程
【标准号】: ASTM E2067-2008
【标准状态】: 现行
【国别】: 美国
ASTM C991-2008e1 金属建筑物用挠性玻璃纤维绝缘材料标准规范
【英文标准名称】: Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
【原文标准名称】: 金属建筑物用挠性玻璃纤维绝缘材料标准规范
【标准号】: ASTM C991-2008e1
【标准状态】: 现行
【国别】: 美国<
ASTM C390-2008e1 批量预制的隔热材料的抽样和验收的标准实施规程
【英文标准名称】: Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
【原文标准名称】: 批量预制的隔热材料的抽样和验收的标准实施规程
【标准号】: ASTM C390-2008e1
【标准状态】: 现行
【国别】: 美国
ASTM A762/A762M-2008 下水道和排水沟用预涂聚合物波纹钢管的标准规范
【英文标准名称】: Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
【原文标准名称】: 下水道和排水沟用预涂聚合物波纹钢管的标准规范
【标准号】: ASTM A762/A762M-2008
【标准状态】: 现行
ASTM D3019-2008 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范
【英文标准名称】: Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered
【原文标准名称】: 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范
【标准号】: ASTM D3019-2008
ASTM D5050-2008 石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南
【英文标准名称】: Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
【原文标准名称】: 石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南
【标准号】: ASTM D5050-2008
【标准状态】: 现行
【国别】: 美
ASTM D4070-2008 混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂的标准规范
【英文标准名称】: Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
【原文标准名称】: 混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂的标准规范
【标准号】: ASTM D4070-2008<
ASTM C1258-2008 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
【英文标准名称】: Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
【原文标准名称】: 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
【标准号】: ASTM C1258-2008
【标准状态】: 现行
ASTM D6513-2008 计算标准耐火试验用木框架墙超强荷载的标准实施规程
【英文标准名称】: Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
【原文标准名称】: 计算标准耐火试验用木框架墙超强荷载的标准实施规程
【标准号】: ASTM D6513-2008
【标准状态】: 现
ASTM C421-2008 预制块型和预制包覆管道隔热材料翻滚时易碎性的试验方法
【英文标准名称】: Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
【原文标准名称】: 预制块型和预制包覆管道隔热材料翻滚时易碎性的试验方法
【标准号】: ASTM C421-2008
【标