资料描述
【英文标准名称】: Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
【原文标准名称】: 从火灾残留碎片样本中保存可燃液体和可燃液体残留提取物的标准实施规程
【标准号】: ASTM E2451-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: E30.01
【标准类型】: (Practice)
【标准水平】: ()
【中文主题词】:
【英文主题词】: analysis; archiving; extract preservation; fire debris; forensic science; ignitable liquid residue; sample extract; sample preservation; storage
【摘要】: The archiving of extracts recovered from fire debris or liquids submitted in a fire investigation provides a mechanism to preserve extracts and liquids for reanalysis in the event that sample loss, sample degradation, or failure of the fire debris container occurs during post-analysis storage of fire debris evidence. The nature of some extraction procedures, which may preclude reanalysis, is considered. Changes to a preserved sample extract and the length of time it remains viable under storage conditions are unknown. The concentration and composition of the ignitable liquid residue or the use of an alternate extraction/concentration technique used to preserve a sample extract of the fire debris sample may result in different findings between the analysis of the preserved sample and the original analysis.1.1 This practice describes procedures for preserving residues of ignitable liquids in extracts obtained from fire debris samples and questioned ignitable liquid samples. Extraction procedures are described in the Referenced Documents. 1.2 This practice does not attempt to address all the issues regarding the short-term or long-term storage of ignitable liquid samples and ignitable liquid extracts from fire debris samples. The changes that may occur under various storage conditions have not been fully documented. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: C80
【国际标准分类号】: 13_220_40
【页数】: 2P.;A4
【正文语种】: 英语
ASTM C828-2011 上釉陶土管道的低压空气试验的标准试验方法
【英文标准名称】: Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
【原文标准名称】: 上釉陶土管道的低压空气试验的标准试验方法
【标准号】: ASTM C828-2011
【标准状态】: 现行
【国别】:
ASTM C700-2011 超强度及标准强度的多孔陶土管标准规格
【英文标准名称】: Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
【原文标准名称】: 超强度及标准强度的多孔陶土管标准规格
【标准号】: ASTM C700-2011
【标准状态】: 现行
【
ASTM C1600/C1600M-2011 快速硬化水硬水泥的标准规格
【英文标准名称】: Standard Specification for Rapid Hardening Hydraulic Cement
【原文标准名称】: 快速硬化水硬水泥的标准规格
【标准号】: ASTM C1600/C1600M-2011
【标准状态】: 现行
【国别】:
【发布日期】:
ASTM C595/C595M-2011 混合水凝水泥用标准规范
【英文标准名称】: Standard Specification for Blended Hydraulic Cements
【原文标准名称】: 混合水凝水泥用标准规范
【标准号】: ASTM C595/C595M-2011
【标准状态】: 现行
【国别】:
【发布日期】: 2011
ASTM C1245/C1245M-2011 测定硬化碾压混凝土和其他硬化粘结混合物间粘合强度的标准试验方法(集中载荷试验)
【英文标准名称】: Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
【原文标准名称】: 测定硬化碾压混凝土和其他硬化粘结混合物间粘合强度的标准试验方法(集中载荷试验)
ASTM C1674-2011 环境温度下带工业孔隙(蜂窝状孔道)的高级陶瓷抗挠强度的标准试验方法
【英文标准名称】: Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
【原文标准名称】: 环境温度下带工业孔隙(蜂窝状孔道)的高级陶瓷抗挠强度的标准试验方法
【标准号】: ASTM
ASTM C1255-2011 用能量色散X射线荧光光谱法分析土壤中铀和钍的标准试验方法
【英文标准名称】: Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
【原文标准名称】: 用能量色散X射线荧光光谱法分析土壤中铀和钍的标准试验方法
【标准号】: ASTM C1255-2011
ASTM B440-2011 镉的标准规格
【英文标准名称】: Standard Specification for Cadmium
【原文标准名称】: 镉的标准规格
【标准号】: ASTM B440-2011
【标准状态】: 现行
【国别】:
【发布日期】: 2011
【实施或试行日期】:
【发布单位
ASTM C1428-2011 用单支标准气体源多收集器质谱仪法进行六氟化铀的同位素分析的标准试验方法
【英文标准名称】: Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
【原文标准名称】: 用单支标准气体源多收集器质谱仪法进行六氟化铀的同位素分析的标准试验方法
【标准号】: ASTM
ASTM D2487-2011 工程用土壤分类的标准实施规程(统一土壤分类法)
【英文标准名称】: Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
【原文标准名称】: 工程用土壤分类的标准实施规程(统一土壤分类法)
【标准号】: ASTM D2487-2011
【标准状态】: 现行
ASTM F2562/F2562M-2008 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范
【英文标准名称】: Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
【原文标准名称】: 非压力排水和排污用增强钢热塑加肋管及其配件的标准规范
【标准号】: ASTM F2562/F2562M-2008
【
ASTM E2067-2008 完全氧燃烧热量测量火灾试验的标准实施规程
【英文标准名称】: Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
【原文标准名称】: 完全氧燃烧热量测量火灾试验的标准实施规程
【标准号】: ASTM E2067-2008
【标准状态】: 现行
【国别】: 美国
ASTM C991-2008e1 金属建筑物用挠性玻璃纤维绝缘材料标准规范
【英文标准名称】: Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
【原文标准名称】: 金属建筑物用挠性玻璃纤维绝缘材料标准规范
【标准号】: ASTM C991-2008e1
【标准状态】: 现行
【国别】: 美国<
ASTM C390-2008e1 批量预制的隔热材料的抽样和验收的标准实施规程
【英文标准名称】: Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
【原文标准名称】: 批量预制的隔热材料的抽样和验收的标准实施规程
【标准号】: ASTM C390-2008e1
【标准状态】: 现行
【国别】: 美国
ASTM A762/A762M-2008 下水道和排水沟用预涂聚合物波纹钢管的标准规范
【英文标准名称】: Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
【原文标准名称】: 下水道和排水沟用预涂聚合物波纹钢管的标准规范
【标准号】: ASTM A762/A762M-2008
【标准状态】: 现行
ASTM D3019-2008 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范
【英文标准名称】: Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered
【原文标准名称】: 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范
【标准号】: ASTM D3019-2008
ASTM D5050-2008 石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南
【英文标准名称】: Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
【原文标准名称】: 石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南
【标准号】: ASTM D5050-2008
【标准状态】: 现行
【国别】: 美
ASTM D4070-2008 混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂的标准规范
【英文标准名称】: Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
【原文标准名称】: 混凝土结构用预制弹性桥梁压缩填缝料安装用粘结剂的标准规范
【标准号】: ASTM D4070-2008<
ASTM C1258-2008 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
【英文标准名称】: Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
【原文标准名称】: 隔热用蒸汽缓凝剂耐高温和耐湿度性能标准试验方法
【标准号】: ASTM C1258-2008
【标准状态】: 现行
ASTM D6513-2008 计算标准耐火试验用木框架墙超强荷载的标准实施规程
【英文标准名称】: Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
【原文标准名称】: 计算标准耐火试验用木框架墙超强荷载的标准实施规程
【标准号】: ASTM D6513-2008
【标准状态】: 现
ASTM C421-2008 预制块型和预制包覆管道隔热材料翻滚时易碎性的试验方法
【英文标准名称】: Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
【原文标准名称】: 预制块型和预制包覆管道隔热材料翻滚时易碎性的试验方法
【标准号】: ASTM C421-2008
【标
ASTM F1804-2008 沿路安装过程聚乙烯(PE)煤气管的许可拉伸载荷测定用规程
【英文标准名称】: Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
【原文标准名称】: 沿路安装过程聚乙烯(PE)煤气管的许可拉伸载荷测定用规程
【标准号】: ASTM F1804-2008
【标准状
ASTM C419-2008 胶泥绝热涂层的试样制作与养护的标准实施规程
【英文标准名称】: Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
【原文标准名称】: 胶泥绝热涂层的试样制作与养护的标准实施规程
【标准号】: ASTM C419-2008
【标准状态】: 现行
【国
ASTM C1409-2008 测量和估算绝缘管及元件数量的标准指南
【英文标准名称】: Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
【原文标准名称】: 测量和估算绝缘管及元件数量的标准指南
【标准号】: ASTM C1409-2008
【标准状态】: 现行
【国别】:
ASTM E2484-2008 多层建筑外部疏散缓降器的标准规范
【英文标准名称】: Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
【原文标准名称】: 多层建筑外部疏散缓降器的标准规范
【标准号】: ASTM E2484-2008
【标准状态】: 现行
【国别】:
ASTM F1908-2008 住宅室外游泳池、热水浴缸和水疗设施用栅栏的标准指南
【英文标准名称】: Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
【原文标准名称】: 住宅室外游泳池、热水浴缸和水疗设施用栅栏的标准指南
【标准号】: ASTM F1908-2008
【标准状态】: 现行
【国别】:
ASTM C1676-2008 微孔绝热标准规范
【英文标准名称】: Standard Specification for Microporous Thermal Insulation
【原文标准名称】: 微孔绝热标准规范
【标准号】: ASTM C1676-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F628-2008 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道标准规范.表40
【英文标准名称】: Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
【原文标准名称】: 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道标准规范.表40
【标准号】:
ASTM C636/C636M-2008 吸音砖和衬板用金属吊顶系统安装的标准实施规程
【英文标准名称】: Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
【原文标准名称】: 吸音砖和衬板用金属吊顶系统安装的标准实施规程
【标准号】: ASTM C636/C636M-2008
【标准状态】:
ASTM E1014-2008 室外A加权声级测量标准指南
【英文标准名称】: Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
【原文标准名称】: 室外A加权声级测量标准指南
【标准号】: ASTM E1014-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】