资料描述
【英文标准名称】: Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
【原文标准名称】: 固化混凝土和密封混凝土液膜性化合物特种性能的标准规范
【标准号】: ASTM C1315-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: C09.22
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】:
【英文主题词】: acid resistance; adhesion promoting; alkali resistance; curing compounds; liquid membrane-forming compounds; sealers; yellowing resistance; Adhesion promoting compounds/materials; Alkali resistance; Concrete construction materials/applications--spec
【摘要】: 1.1 This specification provides requirements for membrane-forming liquids suitable for use as curing compounds and sealers on freshly placed concrete and as sealers on hardened concrete. These membranes have special properties, such as, alkali resistance, acid resistance, adhesion-promoting qualities, and resistance to degradation by UV light. Note 18212;For liquid membrane-forming curing compounds specified primarily by their ability to retain water in newly placed concrete (and by drying time, and for white pigmented products, reflectance), see Specification C 309. 1.2 The values stated in SI units are to be regarded as the standard. (Inch pound units are shown in parentheses). 1.3 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This is a performance specification. The allowable composition of products covered by this specification is limited by various local, regional, and national regulations. Issues related to air quality (solvent emission), worker exposure, and other hazards are not addressed here. It is the responsibility of the producers and users of these materials to comply with pertinent regulations.Warningx2014;Some VOC exempt solvents used to meet the regulations are extremely flammable with low auto ignition temperatures and rapid evaporation rates. Consult the manufacturer''s product information sheet for important application and safety information.
【中国标准分类号】: Q24
【国际标准分类号】: 91_100_50
【页数】: 5P.;A4
【正文语种】: 英语
ASTM C1248-2008 用接缝密封胶着色多孔衬底的标准试验方法
【英文标准名称】: Standard Test Method for Staining of Porous Substrate by Joint Sealants
【原文标准名称】: 用接缝密封胶着色多孔衬底的标准试验方法
【标准号】: ASTM C1248-2008
【标准状态】: 现行
【国别】: 美国
ASTM D6694-2008 喷射聚氨酯泡沫屋顶材料用液体硅涂层的标准规范
【英文标准名称】: Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
【原文标准名称】: 喷射聚氨酯泡沫屋顶材料用液体硅涂层的标准规范
【标准号】: ASTM D6694-2008
【标准状态】: 现行
ASTM C919-2008 声学设备中密封料使用的标准实施规范
【英文标准名称】: Standard Practice for Use of Sealants in Acoustical Applications
【原文标准名称】: 声学设备中密封料使用的标准实施规范
【标准号】: ASTM C919-2008
【标准状态】: 现行
【国别】: 美国
【发布日
ASTM D7158-2008d 沥青屋面板防风(上升力/抗上升力法)标准试验方法
【英文标准名称】: Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
【原文标准名称】: 沥青屋面板防风(上升力/抗上升力法)标准试验方法
【标准号】: ASTM D7158-2008d
【标准状态】: 现行
ASTM D6305-2008 火焰阻滞剂处理的胶合板屋顶盖板计算弯曲强度设计调节因素的标准实施规程
【英文标准名称】: Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
【原文标准名称】: 火焰阻滞剂处理的胶合板屋顶盖板计算弯曲强度设计调节因素的标准实施规程
【标准号】: ASTM D6305-2008
ASTM C1178/C1178M-2008 涂玻璃纤维衬垫防水石膏背板的标准规范
【英文标准名称】: Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
【原文标准名称】: 涂玻璃纤维衬垫防水石膏背板的标准规范
【标准号】: ASTM C1178/C1178M-2008
【标准状态】: 现行
【国别】:
ASTM C781-2008 高温气冷核反应部件用石墨及硼酸化石墨元材料试验的标准实施规程
【英文标准名称】: Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
【原文标准名称】: 高温气冷核反应部件用石墨及硼酸化石墨元材料试验的标准实施规程
【标准号】: ASTM C781-2008
ASTM F1861-2008 弹性墙基的标准规范
【英文标准名称】: Standard Specification for Resilient Wall Base
【原文标准名称】: 弹性墙基的标准规范
【标准号】: ASTM F1861-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或
ASTM C1526-2008 蛇纹岩规格石料标
【英文标准名称】: Standard Specification for Serpentine Dimension Stone
【原文标准名称】: 蛇纹岩规格石料标
【标准号】: ASTM C1526-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM D6630-2008 低坡度绝热屋顶薄膜装配性能的标准指南
【英文标准名称】: Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
【原文标准名称】: 低坡度绝热屋顶薄膜装配性能的标准指南
【标准号】: ASTM D6630-2008
【标准状态】: 现行
【国别】: 美国
ASTM C1643-2008 测量气溶胶泡沫密封剂的后滴涂体积膨胀的标准试验方法
【英文标准名称】: Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
【原文标准名称】: 测量气溶胶泡沫密封剂的后滴涂体积膨胀的标准试验方法
【标准号】: ASTM C1643-2008
【标准状态】: 现行
ASTM C1177/C1177M-2008 用作防水层的玻璃纤维衬垫石膏基底的标准规范
【英文标准名称】: Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
【原文标准名称】: 用作防水层的玻璃纤维衬垫石膏基底的标准规范
【标准号】: ASTM C1177/C1177M-2008
【标准状态】: 现行
【国别】: 美国<
ASTM D6760-2008 用超声波孔间试验测试混凝土深地基完整性的标准试验方法
【英文标准名称】: Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
【原文标准名称】: 用超声波孔间试验测试混凝土深地基完整性的标准试验方法
【标准号】: ASTM D6760-2008
【标准状态】: 现行
ASTM D7401-2008 实验室测定石锚能力的拉伸和跌落试验的标准试验方法
【英文标准名称】: Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
【原文标准名称】: 实验室测定石锚能力的拉伸和跌落试验的标准试验方法
【标准号】: ASTM D7401-2008
【标准状态】: 现行
ASTM D3105-2008 弹性和塑性屋顶和防水材料试验方法的索引
【英文标准名称】: Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
【原文标准名称】: 弹性和塑性屋顶和防水材料试验方法的索引
【标准号】: ASTM D3105-2008
【标准状态】: 现行
ASTM F410-2008 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【英文标准名称】: Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
【原文标准名称】: 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【标准号】: ASTM F410-2008
【标准状态】: 现行
ASTM C1021-2008 建筑密封料试验用实验室的标准实施规程
【英文标准名称】: Standard Practice for Laboratories Engaged in Testing of Building Sealants
【原文标准名称】: 建筑密封料试验用实验室的标准实施规程
【标准号】: ASTM C1021-2008
【标准状态】: 现行
【国别】: 美国
ASTM C1568-2008 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【英文标准名称】: Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
【原文标准名称】: 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【标准号】: ASTM C1568-2008
【标准状态】
ASTM C840-2008 石膏板表面加工和应用标准规范
【英文标准名称】: Standard Specification for Application and Finishing of Gypsum Board
【原文标准名称】: 石膏板表面加工和应用标准规范
【标准号】: ASTM C840-2008
【标准状态】: 现行
【国别】: 美国
【发布日
ASTM D545-2008 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【英文标准名称】: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
【原文标准名称】: 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【标准号】: ASTM D545-2008
【