资料描述
【英文标准名称】: Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
【原文标准名称】: 低坡度绝热屋顶薄膜装配性能的标准指南
【标准号】: ASTM D6630-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D08.20
【标准类型】: (Guide)
【标准水平】: ()
【中文主题词】:
【英文主题词】: cyclical fatigue; dynamic puncture; felts; heat conditioning; moisture content; multiple ply; roofing membrane; single ply; static puncture; structural deck; temperature; thermal insulation; wind tear resistance; Decks; Low-sloped roofs; Perfo
【摘要】: A roof assembly must work as a system. Any component of the roof assembly demonstrating an inherent weakness or inability to perform will diminish the roof system performance and service life expected. This guide lists minimum performance attributes required of low slope roof assemblies. Products not previously used as roof membrane materials require additional tests beyond the scope of this document. This guide is not intended for use on in-service roofing materials. Roof membranes and other components should conform to ASTM product standards, if available. 1.1 This guide lists test methods intended to establish a minimum level of performance for insulated roof membrane assemblies, and lists pertinent design guidelines and installation methods in a unified manner. Material tests and evaluations are included with and without roof insulation. 1.2 It is not possible to establish a precise correlation between laboratory tests on roof assemblies and natural weathering due to variations in geographical climate, design, material and installation. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
【中国标准分类号】: Q17
【国际标准分类号】: 91_100_50
【页数】: 4P.;A4
【正文语种】: 英语
ASTM C1643-2008 测量气溶胶泡沫密封剂的后滴涂体积膨胀的标准试验方法
【英文标准名称】: Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
【原文标准名称】: 测量气溶胶泡沫密封剂的后滴涂体积膨胀的标准试验方法
【标准号】: ASTM C1643-2008
【标准状态】: 现行
ASTM C1177/C1177M-2008 用作防水层的玻璃纤维衬垫石膏基底的标准规范
【英文标准名称】: Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
【原文标准名称】: 用作防水层的玻璃纤维衬垫石膏基底的标准规范
【标准号】: ASTM C1177/C1177M-2008
【标准状态】: 现行
【国别】: 美国<
ASTM D6760-2008 用超声波孔间试验测试混凝土深地基完整性的标准试验方法
【英文标准名称】: Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
【原文标准名称】: 用超声波孔间试验测试混凝土深地基完整性的标准试验方法
【标准号】: ASTM D6760-2008
【标准状态】: 现行
ASTM D7401-2008 实验室测定石锚能力的拉伸和跌落试验的标准试验方法
【英文标准名称】: Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
【原文标准名称】: 实验室测定石锚能力的拉伸和跌落试验的标准试验方法
【标准号】: ASTM D7401-2008
【标准状态】: 现行
ASTM D3105-2008 弹性和塑性屋顶和防水材料试验方法的索引
【英文标准名称】: Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
【原文标准名称】: 弹性和塑性屋顶和防水材料试验方法的索引
【标准号】: ASTM D3105-2008
【标准状态】: 现行
ASTM F410-2008 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【英文标准名称】: Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
【原文标准名称】: 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【标准号】: ASTM F410-2008
【标准状态】: 现行
ASTM C1021-2008 建筑密封料试验用实验室的标准实施规程
【英文标准名称】: Standard Practice for Laboratories Engaged in Testing of Building Sealants
【原文标准名称】: 建筑密封料试验用实验室的标准实施规程
【标准号】: ASTM C1021-2008
【标准状态】: 现行
【国别】: 美国
ASTM C1568-2008 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【英文标准名称】: Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
【原文标准名称】: 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【标准号】: ASTM C1568-2008
【标准状态】
ASTM C840-2008 石膏板表面加工和应用标准规范
【英文标准名称】: Standard Specification for Application and Finishing of Gypsum Board
【原文标准名称】: 石膏板表面加工和应用标准规范
【标准号】: ASTM C840-2008
【标准状态】: 现行
【国别】: 美国
【发布日
ASTM D545-2008 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【英文标准名称】: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
【原文标准名称】: 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【标准号】: ASTM D545-2008
【
ASTM D3877-2008 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法
【英文标准名称】: Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
【原文标准名称】: 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法
【标准号】: ASTM D3877-2008
【标准状态】: 现行<
ASTM D5878-2008 工程技术用岩石质量分级系统的使用标准指南
【英文标准名称】: Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
【原文标准名称】: 工程技术用岩石质量分级系统的使用标准指南
【标准号】: ASTM D5878-2008
【标准状态】: 现行
【国别】: 美
ASTM D3551-2008 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【英文标准名称】: Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
【原文标准名称】: 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【标准号】: ASTM D3551-2008
【标准状态】: 现行
ASTM F1754-2008 海上船支结构检验依据的标准指南
【英文标准名称】: Standard Guide for Marine Vessel Structural Inspection Considerations
【原文标准名称】: 海上船支结构检验依据的标准指南
【标准号】: ASTM F1754-2008
【标准状态】: 现行
【国别】: 美国
【
ASTM F1323-2008 船用焚烧装置标准规范
【英文标准名称】: Standard Specification for Shipboard Incinerators
【原文标准名称】: 船用焚烧装置标准规范
【标准号】: ASTM F1323-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F1244-2008 船舶停泊位的标准规范
【英文标准名称】: Standard Specification for Berths, Marine
【原文标准名称】: 船舶停泊位的标准规范
【标准号】: ASTM F1244-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期
ASTM F1085-2008a 海上船只铺位用床垫及包布床弹簧的标准规范
【英文标准名称】: Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
【原文标准名称】: 海上船只铺位用床垫及包布床弹簧的标准规范
【标准号】: ASTM F1085-2008a
【标准状态】: 现行
【国别】:
ASTM A131/A131M-2008 船用结构钢的标准规范
【英文标准名称】: Standard Specification for Structural Steel for Ships
【原文标准名称】: 船用结构钢的标准规范
【标准号】: ASTM A131/A131M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F2711-2008 自行车车架的标准试验方法
【英文标准名称】: Standard Test Methods for Bicycle Frames
【原文标准名称】: 自行车车架的标准试验方法
【标准号】: ASTM F2711-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日
ASTM D6799-2008 充气缓冲的相关标准术语
【英文标准名称】: Standard Terminology Relating to Inflatable Restraints
【原文标准名称】: 充气缓冲的相关标准术语
【标准号】: ASTM D6799-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008