当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D7401-2008 实验室测定石锚能力的拉伸和跌落试验的标准试验方法

资料类别

相关资料

ASTM D7401-2008 实验室测定石锚能力的拉伸和跌落试验的标准试验方法

ASTM D7401-2008 实验室测定石锚能力的拉伸和跌落试验的标准试验方法

prev next

  • 商品货号：INFOEACH_80914
  • 商品品牌：美国材料与试验协会 ASTM
    商品重量：0克
  • 上架时间：2021-02-25
    商品点击数：5174
  • 用户评价： comment rank 5
  • 本店售价：请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
【原文标准名称】: 实验室测定石锚能力的拉伸和跌落试验的标准试验方法
【标准号】: ASTM D7401-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D18.12
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: impact energy; impact velocity
【摘要】: For a support system to be fully effective, the support system must be able to contain the movement of rock material due to excavation stress release, slabbing, etc. Data from the load tests are used by engineers to design the appropriate support system to improve safety and stability of underground support systems. Test Methods D 4435 and D 4436 are used for in-situ load tests. The local characteristics of the rock, such as roughness and induced fractures, are significant factors in the anchor strength. The material used to simulate the borehole surface should be sufficiently roughened so that failure occurs in the rock anchor and not at the simulated anchor-rock surface. In the case of steel pipe, internal threading using different spacing and depth is accomplished using a machinistx2019;s lathe to simulate roughness. Note 18212;The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing/sampling/inspection/etc. Users of this standard are cautioned that compliance with Practice D 3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D 3740 provides a means of evaluating some of these factors.1.1 These test methods cover the quantitative determination of the working and ultimate static or dynamic capacities of full scale rock anchors. Dynamic capacities are determined to simulate rockburst and blasting conditions (1). The rock anchors are installed in steel pipe to simulate standard boreholes sizes. Rock anchor capacities are determined as a function of resin to steel bolt bond strength and steel bolt yield strength. These tests are not intended to determine rock anchor to borehole rock surface shear strength. 1.2 These test methods are applicable to mechanical, resin, or other similar anchor systems. 1.3 Two methods are provided to determine the capacities of rock anchors, as follows: 1.3.1 Method A8212;Using a horizontal hydraulically loaded pull test system. 1.3.2 Method B8212;Using a vertical dynamically loaded drop test system. 1.4 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.5 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D 6026. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: P22
【国际标准分类号】: 93_020
【页数】: 7P.;A4
【正文语种】: 英语

标签

ASTM[1] D7401-[1]

相关资料

免责条款 - 隐私保护 - 联系我们 - 公司简介 - 批发方案 - 配送方式 - 支付方式 - 法律顾问：北京贾忠强律师