资料描述
【英文标准名称】: Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
【原文标准名称】: 弹性和塑性屋顶和防水材料试验方法的索引
【标准号】: ASTM D3105-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D08.01
【标准类型】: (Guide)
【标准水平】: ()
【中文主题词】:
【英文主题词】: Liquid-applied roofing/waterproofing materials; Roofing materials/applications; Roofing membranes; Selection guides--test procedures; Sheet and liquid-applied roofing material
【摘要】: Where more than one test method or testing condition is listed for the same characteristic in this index, selection of the methods and conditions to be followed must be governed by experience and the requirements in each individual case, together with agreement between the purchaser and seller. The user of this standard must be cautioned that results obtained by different test methods and different conditions of test are not directly comparable.1.1 This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate. Composition specifications and analytical methods in general, as well as tests on raw materials, are not included, the scope being limited to procedures used in the evaluation of the materials as received or as finished materials or coatings.
【中国标准分类号】: Q17
【国际标准分类号】: 91_100_50
【页数】: 4P.;A4
【正文语种】: 英语
ASTM F410-2008 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【英文标准名称】: Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
【原文标准名称】: 光学测量法对弹性地板覆盖物磨损层厚度的标准试验方法
【标准号】: ASTM F410-2008
【标准状态】: 现行
ASTM C1021-2008 建筑密封料试验用实验室的标准实施规程
【英文标准名称】: Standard Practice for Laboratories Engaged in Testing of Building Sealants
【原文标准名称】: 建筑密封料试验用实验室的标准实施规程
【标准号】: ASTM C1021-2008
【标准状态】: 现行
【国别】: 美国
ASTM C1568-2008 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【英文标准名称】: Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
【原文标准名称】: 水泥屋面瓦和粘土屋面瓦抗风性能的标准试验方法(机械提升阻力法)
【标准号】: ASTM C1568-2008
【标准状态】
ASTM C840-2008 石膏板表面加工和应用标准规范
【英文标准名称】: Standard Specification for Application and Finishing of Gypsum Board
【原文标准名称】: 石膏板表面加工和应用标准规范
【标准号】: ASTM C840-2008
【标准状态】: 现行
【国别】: 美国
【发布日
ASTM D545-2008 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【英文标准名称】: Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
【原文标准名称】: 混凝土用预制伸缩缝纫填料的试验方法(非挤压和弹性型)
【标准号】: ASTM D545-2008
【
ASTM D3877-2008 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法
【英文标准名称】: Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
【原文标准名称】: 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法
【标准号】: ASTM D3877-2008
【标准状态】: 现行<
ASTM D5878-2008 工程技术用岩石质量分级系统的使用标准指南
【英文标准名称】: Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
【原文标准名称】: 工程技术用岩石质量分级系统的使用标准指南
【标准号】: ASTM D5878-2008
【标准状态】: 现行
【国别】: 美
ASTM D3551-2008 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【英文标准名称】: Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
【原文标准名称】: 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【标准号】: ASTM D3551-2008
【标准状态】: 现行
ASTM F1754-2008 海上船支结构检验依据的标准指南
【英文标准名称】: Standard Guide for Marine Vessel Structural Inspection Considerations
【原文标准名称】: 海上船支结构检验依据的标准指南
【标准号】: ASTM F1754-2008
【标准状态】: 现行
【国别】: 美国
【
ASTM F1323-2008 船用焚烧装置标准规范
【英文标准名称】: Standard Specification for Shipboard Incinerators
【原文标准名称】: 船用焚烧装置标准规范
【标准号】: ASTM F1323-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F1244-2008 船舶停泊位的标准规范
【英文标准名称】: Standard Specification for Berths, Marine
【原文标准名称】: 船舶停泊位的标准规范
【标准号】: ASTM F1244-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期
ASTM F1085-2008a 海上船只铺位用床垫及包布床弹簧的标准规范
【英文标准名称】: Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
【原文标准名称】: 海上船只铺位用床垫及包布床弹簧的标准规范
【标准号】: ASTM F1085-2008a
【标准状态】: 现行
【国别】:
ASTM A131/A131M-2008 船用结构钢的标准规范
【英文标准名称】: Standard Specification for Structural Steel for Ships
【原文标准名称】: 船用结构钢的标准规范
【标准号】: ASTM A131/A131M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F2711-2008 自行车车架的标准试验方法
【英文标准名称】: Standard Test Methods for Bicycle Frames
【原文标准名称】: 自行车车架的标准试验方法
【标准号】: ASTM F2711-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日
ASTM D6799-2008 充气缓冲的相关标准术语
【英文标准名称】: Standard Terminology Relating to Inflatable Restraints
【原文标准名称】: 充气缓冲的相关标准术语
【标准号】: ASTM D6799-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM D5426-2008 充气减震织物的外观检查和等级评定的标准实施规程
【英文标准名称】: Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
【原文标准名称】: 充气减震织物的外观检查和等级评定的标准实施规程
【标准号】: ASTM D5426-2008
【标准状态】: 现行
ASTM F2642-2008 动力休闲滑板车和迷你自行车的安全说明和标示的标准消费者安全规范
【英文标准名称】: Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
【原文标准名称】: 动力休闲滑板车和迷你自行车的安全说明和标示的标准消费者安全规范
【标准号】: ASTM F2642-2008
ASTM D5428-2008 评定充气减震软组件性能的标准实施规程
【英文标准名称】: Standard Practice for Evaluating the Performance of Inflatable Restraint Modules
【原文标准名称】: 评定充气减震软组件性能的标准实施规程
【标准号】: ASTM D5428-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2641-2008 娱乐电动滑板车和折叠自行车安全的消费者安全标准规范
【英文标准名称】: Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
【原文标准名称】: 娱乐电动滑板车和折叠自行车安全的消费者安全标准规范
【标准号】: ASTM F2641-2008
【标准状态】: 现行
【
ASTM D5807-2008 可充气缓冲垫的过压特性评定的标准规范
【英文标准名称】: Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
【原文标准名称】: 可充气缓冲垫的过压特性评定的标准规范
【标准号】: ASTM D5807-2008
【标准状态】: 现行