资料描述
【英文标准名称】: Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
【原文标准名称】: 土壤石灰混合物单向膨胀,收缩和隆起压力的标准试验方法
【标准号】: ASTM D3877-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D18.15
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: expansion; lime; permeability; soil-lime; uplift; volume shrinkage; Expansion pressure; Lime content--soil-lime mixtures; Permeability--soil/rock; Shrinkage--soil; Soil-lime mixtures; Uplift capacity/pressure
【摘要】: From these tests the relative expansive potential of soil-lime mixtures containing varying amounts of lime can be evaluated. From such an evaluation, the amount of lime required to reduce expansion to acceptable levels can be determined. The data can then be used for the design and specification requirements for subgrades and structural fills where expansive soils are encountered and it is desired to give a certain degree of expansion-shrinkage control to structure foundations and road subgrades. The tests will also show if the specific soils are amenable to lime stabilization. Note 28212;The quality of the result produced by this standard is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D 3740 are generally considered capable of competent and objective testing/sampling/inspection/and the like. Users of this standard are cautioned that compliance with Practice D 3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D 3740 provides a means of evaluating some of those factors.1.1 These test methods provide procedures for conducting expansion, shrinkage, and uplift pressure tests on compacted soil-lime mixtures and can be used to determine the lime content required to achieve desired control of volume changes caused by increases or decreases of moisture. 1.2 The tests can be used to determine (a) the magnitude of volume changes under varying load conditions, (b) the rate of volume change, and (c) the magnitude of pressure change as moisture changes of the soil-lime mixture take place. The permeability of soil-lime mixture can also, if desired, be determined at the various load conditions. Note 18212;Changes in field conditions can have major effects on the expansion and shrinkage characteristics of expansive soils. Therefore, to the greatest extent possible, initial and anticipated future field conditions should be duplicated, particularly with respect to moisture and density. 1.3 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D 6026 1.3.1 The method used to specify how data are collected, calculated, or recorded in this standard is not directly related to the accuracy to which the data can be applied in design or other uses, or both. How one applies the results obtained using this standard is beyond its scope. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: Q24
【国际标准分类号】: 13_080_20
【页数】: 6P.;A4
【正文语种】: 英语
ASTM D5878-2008 工程技术用岩石质量分级系统的使用标准指南
【英文标准名称】: Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
【原文标准名称】: 工程技术用岩石质量分级系统的使用标准指南
【标准号】: ASTM D5878-2008
【标准状态】: 现行
【国别】: 美
ASTM D3551-2008 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【英文标准名称】: Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
【原文标准名称】: 用机械搅拌器在实验室中制备土壤-石灰石混合物的标准实施规程
【标准号】: ASTM D3551-2008
【标准状态】: 现行
ASTM F1754-2008 海上船支结构检验依据的标准指南
【英文标准名称】: Standard Guide for Marine Vessel Structural Inspection Considerations
【原文标准名称】: 海上船支结构检验依据的标准指南
【标准号】: ASTM F1754-2008
【标准状态】: 现行
【国别】: 美国
【
ASTM F1323-2008 船用焚烧装置标准规范
【英文标准名称】: Standard Specification for Shipboard Incinerators
【原文标准名称】: 船用焚烧装置标准规范
【标准号】: ASTM F1323-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F1244-2008 船舶停泊位的标准规范
【英文标准名称】: Standard Specification for Berths, Marine
【原文标准名称】: 船舶停泊位的标准规范
【标准号】: ASTM F1244-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期
ASTM F1085-2008a 海上船只铺位用床垫及包布床弹簧的标准规范
【英文标准名称】: Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
【原文标准名称】: 海上船只铺位用床垫及包布床弹簧的标准规范
【标准号】: ASTM F1085-2008a
【标准状态】: 现行
【国别】:
ASTM A131/A131M-2008 船用结构钢的标准规范
【英文标准名称】: Standard Specification for Structural Steel for Ships
【原文标准名称】: 船用结构钢的标准规范
【标准号】: ASTM A131/A131M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F2711-2008 自行车车架的标准试验方法
【英文标准名称】: Standard Test Methods for Bicycle Frames
【原文标准名称】: 自行车车架的标准试验方法
【标准号】: ASTM F2711-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日
ASTM D6799-2008 充气缓冲的相关标准术语
【英文标准名称】: Standard Terminology Relating to Inflatable Restraints
【原文标准名称】: 充气缓冲的相关标准术语
【标准号】: ASTM D6799-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM D5426-2008 充气减震织物的外观检查和等级评定的标准实施规程
【英文标准名称】: Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
【原文标准名称】: 充气减震织物的外观检查和等级评定的标准实施规程
【标准号】: ASTM D5426-2008
【标准状态】: 现行
ASTM F2642-2008 动力休闲滑板车和迷你自行车的安全说明和标示的标准消费者安全规范
【英文标准名称】: Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
【原文标准名称】: 动力休闲滑板车和迷你自行车的安全说明和标示的标准消费者安全规范
【标准号】: ASTM F2642-2008
ASTM D5428-2008 评定充气减震软组件性能的标准实施规程
【英文标准名称】: Standard Practice for Evaluating the Performance of Inflatable Restraint Modules
【原文标准名称】: 评定充气减震软组件性能的标准实施规程
【标准号】: ASTM D5428-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2641-2008 娱乐电动滑板车和折叠自行车安全的消费者安全标准规范
【英文标准名称】: Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
【原文标准名称】: 娱乐电动滑板车和折叠自行车安全的消费者安全标准规范
【标准号】: ASTM F2641-2008
【标准状态】: 现行
【
ASTM D5807-2008 可充气缓冲垫的过压特性评定的标准规范
【英文标准名称】: Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
【原文标准名称】: 可充气缓冲垫的过压特性评定的标准规范
【标准号】: ASTM D5807-2008
【标准状态】: 现行
ASTM E2665-2008 交通监控数据生成及归档的标准规范
【英文标准名称】: Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
【原文标准名称】: 交通监控数据生成及归档的标准规范
【标准号】: ASTM E2665-2008
【标准状态】: 现行
【国别】: 美国
ASTM E2176-2008 连续浸润标准条件下路面标记反射亮度系数测量的标准试验方法
【英文标准名称】: Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)
【原文标准名称】: 连续浸润标准条件下路面标记反射亮度系数测量的标准试验方法
【标准号】:
ASTM E1489-2008 通过用惯性纵剖面测量装置做的纵剖面测量来计算道路承载值的标准方法
【英文标准名称】: Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
【原文标准名称】: 通过用惯性纵剖面测量装置做的纵剖面测量来计算道路承载值的标准方法
【标准号】: ASTM E1489-
ASTM D7064/D7064M-2008 开式级摩擦层(OGFC)混合设计的标准实施规程
【英文标准名称】: Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
【原文标准名称】: 开式级摩擦层(OGFC)混合设计的标准实施规程
【标准号】: ASTM D7064/D7064M-2008
【标准状态】: 现行
【国别】: 美国
ASTM E1926-2008 从纵剖面测量计算道路国际粗糙度指数的标准实施规程
【英文标准名称】: Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
【原文标准名称】: 从纵剖面测量计算道路国际粗糙度指数的标准实施规程
【标准号】: ASTM E1926-2008
【标准状态】: 现行
ASTM D6932/D6932M-2008 开式级摩擦层厂拌混合料的材料和铺设的标准指南
【英文标准名称】: Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
【原文标准名称】: 开式级摩擦层厂拌混合料的材料和铺设的标准指南
【标准号】: ASTM D6932/D6932M-2008
【标准状态】: 现行