资料描述
【英文标准名称】: Standard Specification for Airframe Emergency Parachutes for Light Sport Aircraft
【原文标准名称】: 轻型娱乐飞行器机身紧急情况降落伞的标准规范
【标准号】: ASTM F2316-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: F37.70
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】:
【英文主题词】: ballistic recovery; light sport aircraft; parachute; Airframe emergency parachutes--specifications; Ballistic recovery; Light sport airplane (LSA)--specifications; Parachutes
【摘要】: 1.1 This specification covers minimum requirements for the design, manufacture, and installation of parachutes for light sport aircraft. 1.2 The values stated in SI units are to be regarded as standard. There may be values given in parentheses that are mathematical conversions to inch-pound units. Values in parentheses are provided for information only and are not considered standard. 1.2.1 Note that within the aviation community mixed units are appropriate in accordance with International Civil Aviation Organization (ICAO) agreements. While the values stated in SI units are regarded as standard, certain values such as airspeeds in knots and altitude in feet are also accepted as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
【中国标准分类号】: V44;V42
【国际标准分类号】: 97_220_40
【页数】: 7P.;A4
【正文语种】: 英语
ASTM E377-2008 烧蚀材料内部温度测量的标准实施规程
【英文标准名称】: Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
【原文标准名称】: 烧蚀材料内部温度测量的标准实施规程
【标准号】: ASTM E377-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2690-2008 向航空管理局电请无人机系统的建议步骤的标准指南:第I部分和第II部分
【英文标准名称】: Standard Guide for Suggested Procedures for Applying for a Flight Authority for an Unmanned Aircraft System: Part I and Part II
【原文标准名称】: 向航空管理局电请无人机系统的建议步骤的标准指南:第I部分和第II部分
【标准号】: ASTM F2690-2008
ASTM F790-2008 航空航天塑料透明外壳用试验材料的标准规范
【英文标准名称】: Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
【原文标准名称】: 航空航天塑料透明外壳用试验材料的标准规范
【标准号】: ASTM F790-2008
【标准状态】: 现行
【国别】: 美国
ASTM E1235-2008 航天器在环境受控范围内的不挥发残留物重量分析测定的标准试验方法
【英文标准名称】: Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
【原文标准名称】: 航天器在环境受控范围内的不挥发残留物重量分析测定的标准试验方法
【标准号】: ASTM E1235-2008
ASTM F2636-2008 用于自主/准自主远程控制单引擎无人机着陆的商业用无人机系统(UAS)飞行实践测试标准的标准实施规程
【英文标准名称】: Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous
【原文标准名称】: 用于自主/准自主远程控制单引擎无人机着陆的商业
ASTM F311-2008 用膜滤器进行粒状污染物分析用航空航天流体样品的处理
【英文标准名称】: Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
【原文标准名称】: 用膜滤器进行粒状污染物分析用航空航天流体样品的处理
【标准号】: ASTM F311-2008
【标准
ASTM F2689-2008 无人飞机系统用往复式火花点火式发动机的设计和制造的标准实施规程
【英文标准名称】: Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Unmanned Aircraft Systems
【原文标准名称】: 无人飞机系统用往复式火花点火式发动机的设计和制造的标准实施规程
【标准号】: ASTM F2689-2008
【
ASTM F2585-2008 液压气动无人航行器系统(UAS)发射系统设计和性能用标准规范
【英文标准名称】: Standard Specification for Design and Performance of Pneumatic-Hydraulic Unmanned Aircraft System (UAS) Launch System
【原文标准名称】: 液压气动无人航行器系统(UAS)发射系统设计和性能用标准规范
【标准号】: ASTM F2585-2008
ASTM E2335-2008 实验室监测的标准指南
【英文标准名称】: Standard Guide for Laboratory Monitors
【原文标准名称】: 实验室监测的标准指南
【标准号】: ASTM E2335-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
ASTM F792-2008 评估X射线安全设备的成像系统性能的标准实施规程
【英文标准名称】: Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
【原文标准名称】: 评估X射线安全设备的成像系统性能的标准实施规程
【标准号】: ASTM F792-2008
【标准状态】: 现行
【国别】: 美
ASTM E563-2008 作为参考温度制备和使用的冰点浴的标准实施规程
【英文标准名称】: Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
【原文标准名称】: 作为参考温度制备和使用的冰点浴的标准实施规程
【标准号】: ASTM E563-2008
【标准状态】: 现行
【国别】:
ASTM D6773-2008 利用锌基轴承环剪切试验机进行标准的剪切试验方法
【英文标准名称】: Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
【原文标准名称】: 利用锌基轴承环剪切试验机进行标准的剪切试验方法
【标准号】: ASTM D6773-2008
【标准状态】: 现行
【国别】: 美国
ASTM E275-2008 说明和测量紫外线可见分光光度计的性能的标准实施规程
【英文标准名称】: Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
【原文标准名称】: 说明和测量紫外线可见分光光度计的性能的标准实施规程
【标准号】: ASTM E275-2008
【标准状态】: 现行
【国别】:
ASTM E2281-2008a 能力指数处理和测量的标准实施规程
【英文标准名称】: Standard Practice for Process and Measurement Capability Indices
【原文标准名称】: 能力指数处理和测量的标准实施规程
【标准号】: ASTM E2281-2008a
【标准状态】: 现行
【国别】: 美国
【发布日
ASTM E1137/E1137M-2008 工业用铂阻尼式温度计标准规范
【英文标准名称】: Standard Specification for Industrial Platinum Resistance Thermometers
【原文标准名称】: 工业用铂阻尼式温度计标准规范
【标准号】: ASTM E1137/E1137M-2008
【标准状态】: 现行
【国别】: 美国
ASTM E2214-2008e1 说明和鉴定颜色测定仪性能的标准实施规程
【英文标准名称】: Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
【原文标准名称】: 说明和鉴定颜色测定仪性能的标准实施规程
【标准号】: ASTM E2214-2008e1
【标准状态】: 现行
【
ASTM E1129/E1129M-2008e1 热电偶连接器的标准规程
【英文标准名称】: Standard Specification for Thermocouple Connectors
【原文标准名称】: 热电偶连接器的标准规程
【标准号】: ASTM E1129/E1129M-2008e1
【标准状态】: 现行
【国别】:
【发布日期】: 2008<
ASTM E2623-2008e1 温度计校准报告的标准实施规程
【英文标准名称】: Standard Practice for Reporting Thermometer Calibrations
【原文标准名称】: 温度计校准报告的标准实施规程
【标准号】: ASTM E2623-2008e1
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2
ASTM D7483-2008 用摆动活塞粘度计测定液体动力粘度和衍生运动粘度的标准试验方法
【英文标准名称】: Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
【原文标准名称】: 用摆动活塞粘度计测定液体动力粘度和衍生运动粘度的标准试验方法
【标准号】: ASTM D7483-2008
ASTM E1682-2008 阴极射线管式(CRT)视觉显示装置的色度性能建模的标准指南
【英文标准名称】: Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
【原文标准名称】: 阴极射线管式(CRT)视觉显示装置的色度性能建模的标准指南
【标准号】: ASTM E1682-2008
【标准状态】: 现行