资料描述
【英文标准名称】: Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
【原文标准名称】: X射线荧光涂层厚度的标准试验方法
【标准号】: ASTM A754/A754M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: A05.07
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: aluminum zinc-coating; coating; coating weight (mass); coatings-metallic; metallic coated; sheet; steel sheet; tin mill products; X-ray fluorescence; zinc coating; zinc-5 % aluminum coating; Aluminum coatings; Coating weight; Electrodeposited co
【摘要】: 1.1 This test method covers the use of X-ray fluorescence (XRF) for determining the coating weight (mass) of metallic coatings on steel sheet. The test method is intended to be used for x201C;on-linex201D; measurements of coating on continuous production lines. 1.2 This test method is applicable to the coatings covered by the following ASTM specifications: A 599/A 599M, A 623, A 623M, A 653/A 653M, A 792/A 792M, A 875/A 875M, A 879/A 879M, A 918, and A 924/A 924M. It may be applicable to other coatings, providing that the elemental nature of the coating and substrate are compatible with the technical aspects of XRF such as the absorption coefficient of the system, primary radiation, fluorescent radiation, type of detection. 1.3 This test method includes the procedure for developing a single standard determination of coating weight (mass). 1.4 This test method includes procedures for both X-ray tube and isotope coating weight (mass) measuring instruments. 1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: A29
【国际标准分类号】: 17_040_20
【页数】: 8P.;A4
【正文语种】: 英语
ASTM D1654-2008 腐蚀环境中涂漆或覆层试样评估的标准试验方法
【英文标准名称】: Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
【原文标准名称】: 腐蚀环境中涂漆或覆层试样评估的标准试验方法
【标准号】: ASTM D1654-2008
【标准状态】: 现行
ASTM A1059/A1059M-2008 用于钢紧固件、五金制品及其他产品的具有热扩散涂层(TDC)锌合金的标准规范
【英文标准名称】: Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
【原文标准名称】: 用于钢紧固件、五金制品及其他产品的具有热扩散涂层(TDC)锌合金的标准规范
【标准号】: ASTM A1059/A1059M-2008
ASTM D7449/D7449M-2008 使用同轴空气电缆测量微波频率下固体材料相对复合电容率和相对磁导率的标准试验方法
【英文标准名称】: Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
【原文标准名称】: 使用同轴空气电缆测量微波频率下固体材料相对复合电容率和相对磁导率的标准试验方法
ASTM D6617-2008 用标准物质的单项试验结果检测实验室偏差的标准实施规程
【英文标准名称】: Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
【原文标准名称】: 用标准物质的单项试验结果检测实验室偏差的标准实施规程
【标准号】: ASTM D6617-2008
【标准状态】: 现行
ASTM D4635-2008a 通用和包装用低密度聚乙烯薄膜标准规范
【英文标准名称】: Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
【原文标准名称】: 通用和包装用低密度聚乙烯薄膜标准规范
【标准号】: ASTM D4635-2008a
【标准状
ASTM E2655-2008 ASTM试验方法中术语测量不确定性的使用和试验结果不确定性的报告用标准指南
【英文标准名称】: Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
【原文标准名称】: ASTM试验方法中术语测量不确定性的使用和试验结果不确定性的报告用标准指南
【标准号】: ASTM E2655-2008
ASTM D5367-2008 用水或水/磨料喷洗时为防止钢生薄锈用抑制剂处理的表面镀层的评估用标准实施规程
【英文标准名称】: Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
【原文标准名称】: 用水或水/磨料喷洗时为防止钢生薄锈用抑制剂处理的表面镀层的评估用标准实施规程
ASTM E308-2008 用CIE体系估计物体颜色的标准实施规程
【英文标准名称】: Standard Practice for Computing the Colors of Objects by Using the CIE System
【原文标准名称】: 用CIE体系估计物体颜色的标准实施规程
【标准号】: ASTM E308-2008
【标准状态】: 现行
【国别】: 美国
ASTM E598-2008 用瞬变零点量热器测量高能环境的超级传热速率的标准试验方法
【英文标准名称】: Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
【原文标准名称】: 用瞬变零点量热器测量高能环境的超级传热速率的标准试验方法
【标准号】: ASTM E598-2008
ASTM F2717-2008 发展第三方独立认证的标准指南
【英文标准名称】: Standard Guide for Development of an Independent Third-Party Verification
【原文标准名称】: 发展第三方独立认证的标准指南
【标准号】: ASTM F2717-2008
【标准状态】: 现行
【国别】: 美国
ASTM E2609-2008 刚性聚合物包装中气味或味道渗出或两者同时进行的标准试验方法
【英文标准名称】: Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
【原文标准名称】: 刚性聚合物包装中气味或味道渗出或两者同时进行的标准试验方法
【标准号】: ASTM E2609-2008
【标准状态】: 现行
ASTM E2164-2008 定向差测试的标准试验方法
【英文标准名称】: Standard Test Method for Directional Difference Test
【原文标准名称】: 定向差测试的标准试验方法
【标准号】: ASTM E2164-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM F519-2008 电镀/涂层处理和设备环境的机械氢脆化评价的标准试验方法
【英文标准名称】: Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
【原文标准名称】: 电镀/涂层处理和设备环境的机械氢脆化评价的标准试验方法
【标准号】: ASTM F519-2008
ASTM D5162-2008 金属衬底上非传导保护涂料的间断性(假期)检验标准实施规程
【英文标准名称】: Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
【原文标准名称】: 金属衬底上非传导保护涂料的间断性(假期)检验标准实施规程
【标准号】: ASTM D5162-2008
【标准状态】
ASTM D2454-2008 测定烘焙过度对有机涂层的影响的标准实施规程
【英文标准名称】: Standard Practice for Determining the Effect of Overbaking on Organic Coatings
【原文标准名称】: 测定烘焙过度对有机涂层的影响的标准实施规程
【标准号】: ASTM D2454-2008
【标准状态】: 现行
【国别】: 美国
ASTM D2200-2008 涂漆钢表面用绘图表面预处理标准和指南标准方法
【英文标准名称】: Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
【原文标准名称】: 涂漆钢表面用绘图表面预处理标准和指南标准方法
【标准号】: ASTM D2200-2008
【标准状态】: 现行
ASTM F976-2008 消费者用便携式煤油和柴油容器的标准规范
【英文标准名称】: Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
【原文标准名称】: 消费者用便携式煤油和柴油容器的标准规范
【标准号】: ASTM F976-2008
【标准状态】: 现行
【国别】: 美国<
ASTM F17-2008 与柔性阻隔包装相关的标准术语
【英文标准名称】: Standard Terminology Relating to Flexible Barrier Packaging
【原文标准名称】: 与柔性阻隔包装相关的标准术语
【标准号】: ASTM F17-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 20
ASTM D7434-2008 测定托盘或成套负荷上被动式无线射频识别(RFID)应答器性能的标准试验方法
【英文标准名称】: Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
【原文标准名称】: 测定托盘或成套负荷上被动式无线射频识别(RFID)应答器性能的标准试验方法
【标准号】:
ASTM F1043-2008 金属工业链护栏框架强度和保护镀层的标准规范
【英文标准名称】: Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
【原文标准名称】: 金属工业链护栏框架强度和保护镀层的标准规范
【标准号】: ASTM F1043-2008
【标准状态】: 现行