资料描述
【英文标准名称】: Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
【原文标准名称】: 工程用银电沉积镀层标准规范
【标准号】: ASTM B700-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: B08.08.02
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】:
【英文主题词】: Electrodeposited Ag coatings--specifications; Engineered electrodeposited coatings--specifications; Silver (electrodeposited)--specifications
【摘要】: 1.1 This specification covers requirements for electrodeposited coatings of silver used for engineering purposes that may be mat, bright, or semibright and are not less than 98 % silver purity. 1.2 Coatings of silver covered by this specification are usually employed for solderable surfaces, electrical contact characteristics, high electrical and thermal conductivity, thermocompression bonding, wear resistance of load-bearing surfaces, and spectral reflectivity. 1.3 In the Appendixes important characteristics of electrodeposited silver coatings are briefly described which must be considered when used in engineering applications, namely electrical conductivity (see Appendix X1), silver migration (see Appendix X2), thickness (see Appendix X3), hardness (see Appendix X4), and atmospheric tarnish (see Appendix X5). 1.4 The following hazards caveat pertains only to the test methods section of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: A29
【国际标准分类号】: 25_220_40
【页数】: 6P.;A4
【正文语种】: 英语
ASTM D6132-2008 用超声波仪表对外施的有机涂层的干膜厚度进行无损测量的标准试验方法
【英文标准名称】: Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
【原文标准名称】: 用超声波仪表对外施的有机涂层的干膜厚度进行无损测量的标准试验方法
【标准号】: ASTM D6132-2008
ASTM E29-2008 使用试验数据中重要数字以确定对规范的适应性
【英文标准名称】: Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
【原文标准名称】: 使用试验数据中重要数字以确定对规范的适应性
【标准号】: ASTM E29-2008
【标准状态】: 现行
ASTM E2070-2008 用等温法的差示扫描量热法测定动力系数的标准试验
【英文标准名称】: Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
【原文标准名称】: 用等温法的差示扫描量热法测定动力系数的标准试验
【标准号】: ASTM E2070-2008
【标准状态】: 现行
ASTM D7386-2008 单一包裹运输系统的包装性能测试的标准实施规程
【英文标准名称】: Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
【原文标准名称】: 单一包裹运输系统的包装性能测试的标准实施规程
【标准号】: ASTM D7386-2008
【标准状态】: 现行
【国别】:
ASTM E457-2008 用热容量(芯棒)热量计测量传热速率的标准试验方法
【英文标准名称】: Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
【原文标准名称】: 用热容量(芯棒)热量计测量传热速率的标准试验方法
【标准号】: ASTM E457-2008
【标准状态】: 现行
ASTM E341-2008 用能量平衡法测量等离子体电弧气体焓的标准实施规程
【英文标准名称】: Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
【原文标准名称】: 用能量平衡法测量等离子体电弧气体焓的标准实施规程
【标准号】: ASTM E341-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2688-2008 系统为基础、以客户为中心的制造质量计划的标准指南
【英文标准名称】: Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
【原文标准名称】: 系统为基础、以客户为中心的制造质量计划的标准指南
【标准号】: ASTM F2688-2008
【标准状态】: 现行
【国别】:
ASTM F2714-2008 用荧光衰减法进行包装中顶空氧气分析的标准试验方法
【英文标准名称】: Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
【原文标准名称】: 用荧光衰减法进行包装中顶空氧气分析的标准试验方法
【标准号】: ASTM F2714-2008
【标准状态】: 现行
【国别】:
ASTM F852-2008 消费者用便携式汽油容器的标准规范
【英文标准名称】: Standard Specification for Portable Gasoline Containers for Consumer Use
【原文标准名称】: 消费者用便携式汽油容器的标准规范
【标准号】: ASTM F852-2008
【标准状态】: 现行
【国别】: 美国
ASTM D610-2008 涂漆钢表面锈蚀程度评价的试验方法
【英文标准名称】: Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
【原文标准名称】: 涂漆钢表面锈蚀程度评价的试验方法
【标准号】: ASTM D610-2008
【标准状态】: 现行
【国别】: 美国
ASTM E2605-2008 接收性能标准规范
【英文标准名称】: Standard Practice for Receiving Property
【原文标准名称】: 接收性能标准规范
【标准号】: ASTM E2605-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
ASTM E458-2008 烧蚀的热标准试验方法
【英文标准名称】: Standard Test Method for Heat of Ablation
【原文标准名称】: 烧蚀的热标准试验方法
【标准号】: ASTM E458-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期
ASTM F1252-2008 测量透明材料光反射率的试验方法
【英文标准名称】: Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
【原文标准名称】: 测量透明材料光反射率的试验方法
【标准号】: ASTM F1252-2008
【标准状态】: 现行
【国别】: 美国
ASTM D6039/D6039M-2008 敞口和有盖的木板箱标准规范
【英文标准名称】: Standard Specification for Open and Covered Wood Crates
【原文标准名称】: 敞口和有盖的木板箱标准规范
【标准号】: ASTM D6039/D6039M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ASTM D1735-2008 用水雾仪进行涂层耐水性试验的标准实施规程
【英文标准名称】: Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
【原文标准名称】: 用水雾仪进行涂层耐水性试验的标准实施规程
【标准号】: ASTM D1735-2008
【标准状态】: 现行
【国别】: 美
ASTM D3686-2008 用收集有机化合物蒸气进行大气取样的标准方法
【英文标准名称】: Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
【原文标准名称】: 用收集有机化合物蒸气进行大气取样的标准方法
【标准号】: ASTM D3686-2008
【标准状态
ASTM C1308-2008 固化废料中扩散释放物加速浸出试验,模型扩散的计算机程序和从圆柱形废料状态中分离淋滤的标准试验方法
【英文标准名称】: Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
【原文标准名称】: 固化废料中扩散释放物加速浸出试验,模型扩散的计算机
ASTM D1253-2008 水中残余氯的标准试验方法
【英文标准名称】: Standard Test Method for Residual Chlorine in Water
【原文标准名称】: 水中残余氯的标准试验方法
【标准号】: ASTM D1253-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM D2777-2008e1 D19水委员会应用试验方法的精确性及偏差测定的标准实施规范
【英文标准名称】: Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
【原文标准名称】: D19水委员会应用试验方法的精确性及偏差测定的标准实施规范
【标准号】: ASTM D2777-2008e1
【标准状态
ASTM D4130-2008 微咸水、海水和盐水中硫酸盐离子的标准试验方法
【英文标准名称】: Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
【原文标准名称】: 微咸水、海水和盐水中硫酸盐离子的标准试验方法
【标准号】: ASTM D4130-2008
【标准状态】: 现行
【国别】: 美国