当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D6039/D6039M-2008 敞口和有盖的木板箱标准规范
ASTM D6039/D6039M-2008 敞口和有盖的木板箱标准规范

ASTM D6039/D6039M-2008 敞口和有盖的木板箱标准规范

prev next

  • 商品货号:INFOEACH_80785
  • 商品品牌:美国材料与试验协会 ASTM
    商品重量:0克
  • 上架时间:2021-02-27
    商品点击数:5255
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Standard Specification for Open and Covered Wood Crates
【原文标准名称】: 敞口和有盖的木板箱标准规范
【标准号】: ASTM D6039/D6039M-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D10.12
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】:
【英文主题词】: crate; panels; shipping; wood; Covered wood crates; Crates; Open wood crates; Shipping containers/materials/applications--specifications; Wood crates
【摘要】: 1.1 This specification covers five types and two styles of open and one type, and one style of covered wood crates designed for net loads not exceeding 4000 lb [1814 kg]. Open crates are suitable for shipment of items, which are not readily susceptible to damage from outside forces, and which require only limited protection against the elements. 1.2 If environmental protection is necessary, use of a shroud or a covered crate should be considered. With the exception of Type III, Style B crates, the crates included in this specification are for use in domestic and overseas shipment of net loads not over 4000 lb [1814 kg]. Use shall be confined to items falling within the dimensions and weight limitations of the types and grades specified in Table 1. 1.3 In general, Style A crates have heavier components and are to withstand rather severe handling and multiple shipments (heavy-duty), while Style B crates should be confined to handling and shipping that impose only light to moderate hazards on the container (light-duty). Types I, IV, and V crates are general purpose types; Type II crates are designed for items such as ladders, tubing, extrusions, or wallboard which do not require blocking, bracing, or cushioning; and Type III, Style B crates are designed for such self-supporting material as channels, angles, or other structural members where the container serves only as a means for more convenient stacking and handling. 1.4 If the use of other construction methods or techniques is acceptable and permitted (see 5.1.13), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle specified in Practice D 4169 can be used to develop comparative procedures and criteria. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. TABLE 1 Crate Classification TypeStyle A, Heavy DutyStyle B, Light Duty Maximum Net Load (lb/kg)Inside Dimensions, maxMaximum Net Load (lb/kg)Inside Dimensions, max Length (ft/mm)Width (ft/mm)Height (ft/mm)Length (ft/mm)Width (ft/mm)Height (ft/mm) I
250 [113]
4 [1200]
3 [900]
3 [900]

相关资料