当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法
ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法

ASTM D4191-2008 原子吸收分光光度法对水中钠含量的标准试验方法

prev next

  • 商品货号:INFOEACH_80768
  • 商品品牌:美国材料与试验协会 ASTM
    商品重量:0克
  • 上架时间:2021-03-04
    商品点击数:5621
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
【原文标准名称】: 原子吸收分光光度法对水中钠含量的标准试验方法
【标准号】: ASTM D4191-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D19.05
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: analysis; atomic absorption; sodium; water; Total recoverable elements (in water); Atomic absorption spectrophotometry/spectroscopy; Inorganic compounds--water; Sodium content--water; Spectrophotometry--atomic absorption (water/wastewater)
【摘要】: Sodium salts are very soluble, and sodium leached from soil and rocks tends to remain in solution. Water with a high ratio of sodium to calcium is deleterious to soil structure. Sodium is not particularly significant in potable water except for those persons having an abnormal sodium metabolism, but water supplies in some areas contain sufficient sodium to be a factor in the planning of sodium-free diets. The use of sodium salts is common in industry; therefore, many industrial wastewaters contain significant quantities of sodium. For high-pressure boiler feed-water even trace amounts of sodium are of concern.1.1 This test method covers the determination of low amounts of sodium in waters having low solids content. The applicable range of this test method is from 0.20 to 3.0 mg/L when using the 589.6-nm resonance line. This range may be extended upward by dilution of an appropriate aliquot of sample or by use of the less-sensitive 330.2-nm resonance line (see Test Method D 3561). Many workers have found that this test method is reliable for sodium levels to 0.005 mg/L, but use of this test method at this low level is dependent on the configuration of the aspirator and nebulizer system available in the atomic absorption spectrophotometer as well as the experience and skill of the analyst. The precision and bias data presented are insufficient to justify use of this test method in the 0.005 to 0.20-mg/L range. 1.2 This test method has been used successfully with spiked reagent water. It is the analyst''s responsibility to assure the validity of the test method to other low dissolved solids matrices. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: Z16
【国际标准分类号】: 13_060_50
【页数】: 4P.;A4
【正文语种】: 英语

相关资料