资料描述
【英文标准名称】: Standard Specification for Low Energy Air Guns (Less Than 1 Joule)
【原文标准名称】: 低能量气枪(低于1 Joule)的标准规范
【标准号】: ASTM F2748-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: F08.27
【标准类型】: (Specification)
【标准水平】: ()
【中文主题词】:
【英文主题词】: air soft; airsoft; LEAG projectile; low energy air gun
【摘要】: 1.1 This specification covers low energy air guns which propel a projectile by means of 1 joule or less of energy released by compressed air, compressed CO2, mechanical springs, battery or a combination thereof, used in the sport commonly called airsoft or air soft, and is to be used in conjunction with Specification F 2654. 1.2 Limitations8212;This specification does not cover the following types of products: Non-powder guns as specifically defined in Consumer Safety Specification F 589 and which are commonly referred to as BB or pellet guns; paintball markers as specifically defined in Specification F 2272; low energy air guns which propel a projectile by energy of over 1 joule or use gas propulsion other than CO2; toy products; and non-recreational air guns, for example, those used by law enforcement, scientific, military, industrial, or theatrical entities. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: Y56
【国际标准分类号】: 95_020
【页数】: 6P.;A4
【正文语种】: 英语
ASTM D7305-2008a 印刷品反射密度的标准试验方法
【英文标准名称】: Standard Test Method for Reflection Density of Printed Matter
【原文标准名称】: 印刷品反射密度的标准试验方法
【标准号】: ASTM D7305-2008a
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ASTM F2107-2008 棒球和垒球运动场带草皮区域的建造和维护用的标准指南
【英文标准名称】: Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
【原文标准名称】: 棒球和垒球运动场带草皮区域的建造和维护用的标准指南
【标准号】: ASTM F2107-2008
【标准状态】: 现行
ASTM F2030-2008 彩弹球柱体防爆盘组件的标准规范
【英文标准名称】: Standard Specification for Paintball Cylinder Burst Disk Assemblies
【原文标准名称】: 彩弹球柱体防爆盘组件的标准规范
【标准号】: ASTM F2030-2008
【标准状态】: 现行
【国别】: 美国
【发布
ASTM F2553-2008 用于彩弹游戏中适于再装的二氧化碳枪筒警告的标准规范
【英文标准名称】: Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
【原文标准名称】: 用于彩弹游戏中适于再装的二氧化碳枪筒警告的标准规范
【标准号】: ASTM F2553-2008
【标准状态】: 现行
ASTM D1388-2008 织物硬度的标准试验方法
【英文标准名称】: Standard Test Method for Stiffness of Fabrics
【原文标准名称】: 织物硬度的标准试验方法
【标准号】: ASTM D1388-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实
ASTM D6663-2008 单位和家用编织和针织盖被及附属品的标准规范
【英文标准名称】: Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
【原文标准名称】: 单位和家用编织和针织盖被及附属品的标准规范
【标准号】: ASTM D6663-2008
【标准状态】: 现
ASTM D629-2008 纺织品定量分析的标准试验方法
【英文标准名称】: Standard Test Methods for Quantitative Analysis of Textiles
【原文标准名称】: 纺织品定量分析的标准试验方法
【标准号】: ASTM D629-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ASTM F953-2008 商业洗碗机(带有固定架倾斜型)的化学消毒处理
【英文标准名称】: Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
【原文标准名称】: 商业洗碗机(带有固定架倾斜型)的化学消毒处理
【标准号】: ASTM F953-2008
【标准状态】: 现行
ASTM F2651-2008b 天然运动场表面土壤和草皮的特征相关的标准术语
【英文标准名称】: Standard Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
【原文标准名称】: 天然运动场表面土壤和草皮的特征相关的标准术语
【标准号】: ASTM F2651-2008b
【标准状态】: 现行
ASTM D6716-2008 湿蓝皮中总灰分的标准试验方法
【英文标准名称】: Standard Test Method for Total Ash in Wet Blue
【原文标准名称】: 湿蓝皮中总灰分的标准试验方法
【标准号】: ASTM D6716-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM D6658-2008 通过烘炉干燥测定湿铬鞣革的挥发性物质(湿度)的标准试验方法
【英文标准名称】: Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
【原文标准名称】: 通过烘炉干燥测定湿铬鞣革的挥发性物质(湿度)的标准试验方法
【标准号】: ASTM D6658-2008
【标准状态】: 现行
【国别】:
ASTM D7477-2008 测定淹没在沸水中蓝湿皮的区域稳定性的标准试验方法
【英文标准名称】: Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
【原文标准名称】: 测定淹没在沸水中蓝湿皮的区域稳定性的标准试验方法
【标准号】: ASTM D7477-2008
【标准状态】: 现行
ASTM D1776-2008e1 纺织品的调湿和试验标准实施规程
【英文标准名称】: Standard Practice for Conditioning and Testing Textiles
【原文标准名称】: 纺织品的调湿和试验标准实施规程
【标准号】: ASTM D1776-2008e1
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ASTM D4910-2008 0~24个月幼儿尺码的身体测量尺寸表
【英文标准名称】: Standard Tables of Body Measurements for Children, Infant Sizesx2014;Preemie to 24 Months
【原文标准名称】: 0~24个月幼儿尺码的身体测量尺寸表
【标准号】: ASTM D4910-2008
【标准状态】: 现行
【国别】:
ASTM D6767-2008 用毛细管流量试验测定纺织物的标准试验方法
【英文标准名称】: Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
【原文标准名称】: 用毛细管流量试验测定纺织物的标准试验方法
【标准号】: ASTM D6767-2008
【标准状态】: 现行
【国别】:
ASTM D6763-2008 测试外部木材污渍和透明防水覆层的标准指南
【英文标准名称】: Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
【原文标准名称】: 测试外部木材污渍和透明防水覆层的标准指南
【标准号】: ASTM D6763-2008
【标准状态】: 现行
【国别】: 美国
ASTM D4632-2008 土工织物的断裂荷载和延伸度的标准试验方法
【英文标准名称】: Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
【原文标准名称】: 土工织物的断裂荷载和延伸度的标准试验方法
【标准号】: ASTM D4632-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2734-2008 测试喷墨打印机墨盒保质期的标准方法
【英文标准名称】: Standard Practice for Testing the Shelf Life of Ink Jet Printer Cartridges
【原文标准名称】: 测试喷墨打印机墨盒保质期的标准方法
【标准号】: ASTM F2734-2008
【标准状态】: 现行
【国别】: 美国
ASTM D4720-2008 软窗帘性能评定的标准实施规程
【英文标准名称】: Standard Performance Specification for Soft Window Covering Fabrics for Household Use
【原文标准名称】: 软窗帘性能评定的标准实施规程
【标准号】: ASTM D4720-2008
【标准状态】: 现行
【国别】: 美国
ASTM F2376-2008 水滑道的分类,设计,制造,结构和使用的标准实施规程
【英文标准名称】: Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
【原文标准名称】: 水滑道的分类,设计,制造,结构和使用的标准实施规程
【标准号】: ASTM F2376-2008
【标准状态】: 现