当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM D7138-2008 确定合成纤维熔融温度标准试验方法
ASTM D7138-2008 确定合成纤维熔融温度标准试验方法

ASTM D7138-2008 确定合成纤维熔融温度标准试验方法

prev next

  • 商品货号:INFOEACH_80647
  • 商品品牌:美国材料与试验协会 ASTM
    商品重量:0克
  • 上架时间:2021-03-04
    商品点击数:5960
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Standard Test Method to Determine Melting Temperature of Synthetic Fibers
【原文标准名称】: 确定合成纤维熔融温度标准试验方法
【标准号】: ASTM D7138-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: D13.51
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: differential scanning calorimetry; melting; synthetic fibers; Differential scanning calorimetry (DSC); Melting; Synthetic fabrics; Textile fibers
【摘要】: Either of these two test methods is used to determine the temperature at which a synthetic fiber specimen changes from a solid to a liquid-like state. Synthetic fibers may be either amorphous or semi-crystalline thermoplastics or thermosets. Synthetic fibers may change from the solid to a liquid-like state on heating because of the glass transition of amorphous polymers, the melting of crystalline regions of semi-crystalline polymers, or at the onset of degradation. Thermoplastic fibers consist of crystalline and amorphous regions and may be manufactured with a range of molecular weights. The amorphous and crystalline fiber structure and variable molecular weight can lead to a melting temperature range instead of a discreet melting point (see Table X1.1). This test method is considered satisfactory for acceptance testing of commercial shipments. If there are differences of practical significance between reported test results for two or more laboratories, perform comparative testing to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, use the samples for such a comparative test that are as homogeneous as possible, drawn from the same lot of material as the samples that resulted in disparate results during initial testing and randomly assigned in equal numbers to each laboratory. Compare the test results from the laboratories involved using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If bias is found, either its cause must be found and corrected, or future test results for that material must be adjusted in consideration of the known bias. This test method is suitable for quality control testing of synthetic fibers and product comparisons of different fibers by manufacturers, retailers, and users. If the test method is used to identify fiber material type, it is important to test a known reference material at the same laboratory with the same test method to confirm the fiber identification. In addition, since some fiber types have similar melting temperatures or overlapping melting temperature ranges as show in Table X1.1, secondary methods for fiber identification as described in Test Methods D 276 will be required to make fiber identifications.1.1 Either of two test methods are used to determine the melting temperature of thermoplastic fibers, yarns, or threads. 1.2 Method 1 can be used to determine melting temperatures for blends of multiple fiber material types. Method 2 can only be used to determine the melting temperature of a single fiber material type. 1.2.1 Method 1, Differential Scanning Calorimetry (DSC), measures changes in heat capacity and will detect the glass transition, the crystalline melting and endothermic thermal degradation. 1.2.2 Method 2, a visual determination of melting, determines any change that visually appears as a transition from a solid to a liquid state. 1.2.3 Due to the differences in what each test method measures, the results from Method 1 and Method 2 cannot be compared. 1.3 The values stated in either SI units or other units are to be regarded separately. The values stated in each system are not exact equivalents; therefore, each system shall be used independently without combining values. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: W50
【国际标准分类号】: 59_060_20
【页数】: 5P.;A4
【正文语种】: 英语

相关资料