资料描述
【英文标准名称】: Standard Test Methods for Rockwell Hardness of Metallic Materials
【原文标准名称】: 金属材料洛氏硬度的标准试验方法
【标准号】: ASTM E18-2008b
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: E28.06
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: hardness; mechanical test; metals; Rockwell; Calibration--metals/alloys analysis instrumentation; Metal electrical conductors; Rockwell hardness; Testing machines; Verification
【摘要】: The Rockwell hardness test is an empirical indentation hardness test that can provide useful information about metallic materials. This information may correlate to tensile strength, wear resistance, ductility, and other physical characteristics of metallic materials, and may be useful in quality control and selection of materials. Rockwell hardness tests are considered satisfactory for acceptance testing of commercial shipments, and have been used extensively in industry for this purpose. Rockwell hardness testing at a specific location on a part may not represent the physical characteristics of the whole part or end product. Adherence to this standard test method provides traceability to national Rockwell hardness standards except as stated otherwise.1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines
Annex A1
Rockwell Hardness Standardizing Machines
Annex A2
Standardization of Rockwell Indenters
Annex A3
Standardization of Rockwell Hardness Test Blocks
Annex A4
Guidelines for Determining the Minimum Thickness of a Test Piece
Annex A5
Hardness Value Corrections When Testing on Convex Cylindrical Surfaces
Annex A6
ASTM A456/A456M-2008 大型曲轴锻件的磁粉检查标准规范
【英文标准名称】: Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
【原文标准名称】: 大型曲轴锻件的磁粉检查标准规范
【标准号】: ASTM A456/A456M-2008
【标准状态】: 现行
【国别】:
ASTM A716-2008 球墨铸铁涵洞管标准规范
【英文标准名称】: Standard Specification for Ductile Iron Culvert Pipe
【原文标准名称】: 球墨铸铁涵洞管标准规范
【标准号】: ASTM A716-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
ASTM E837-2008e1 用钻孔应变仪法测定残余应力的标准试验方法
【英文标准名称】: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
【原文标准名称】: 用钻孔应变仪法测定残余应力的标准试验方法
【标准号】: ASTM E837-2008e1
【标准状态】: 现行
ASTM E647-2008e1 疲劳裂缝增大率测量用测试方法
【英文标准名称】: Standard Test Method for Measurement of Fatigue Crack Growth Rates
【原文标准名称】: 疲劳裂缝增大率测量用测试方法
【标准号】: ASTM E647-2008e1
【标准状态】: 现行
【国别】: 美国
【发布
ASTM B271-2008e1 铜基合金离心铸件的技术规范
【英文标准名称】: Standard Specification for Copper-Base Alloy Centrifugal Castings
【原文标准名称】: 铜基合金离心铸件的技术规范
【标准号】: ASTM B271-2008e1
【标准状态】: 现行
【国别】: 美国
【发布日期】
ASTM A1055/A1055M-2008ae1 锌和环氧双涂层钢筋棒的标准规范
【英文标准名称】: Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
【原文标准名称】: 锌和环氧双涂层钢筋棒的标准规范
【标准号】: ASTM A1055/A1055M-2008ae1
【标准状态】: 现行
【国别】: 美国
ASTM E1290-2008e1 测量裂缝尖端开口位移(CTOD)断裂韧度测量的标准试验方法
【英文标准名称】: Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
【原文标准名称】: 测量裂缝尖端开口位移(CTOD)断裂韧度测量的标准试验方法
【标准号】: ASTM E1290-2008e1
【标准状态】: 现行
ASTM B493/B493M-2008e1 锆及锆合金锻件的标准规范
【英文标准名称】: Standard Specification for Zirconium and Zirconium Alloy Forgings
【原文标准名称】: 锆及锆合金锻件的标准规范
【标准号】: ASTM B493/B493M-2008e1
【标准状态】: 现行
【国别】: 美国
【
ASTM B351/B351M-2008e1 核设备用热轧和冷加工锆和锆合金棒材、杆材和线材的标准规范
【英文标准名称】: Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
【原文标准名称】: 核设备用热轧和冷加工锆和锆合金棒材、杆材和线材的标准规范
【标准号】: ASTM B351/B
ASTM A510-2008 碳素钢盘条和粗圆钢丝通用要求的标准规范
【英文标准名称】: Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
【原文标准名称】: 碳素钢盘条和粗圆钢丝通用要求的标准规范
【标准号】: ASTM A510-2008
【标准状态】: 现行
ASTM E478-2008 铜合金化学分析的标准试验方法
【英文标准名称】: Standard Test Methods for Chemical Analysis of Copper Alloys
【原文标准名称】: 铜合金化学分析的标准试验方法
【标准号】: ASTM E478-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ASTM B106-2008 恒温金属挠性的标准试验方法
【英文标准名称】: Standard Test Methods for Flexivity of Thermostat Metals
【原文标准名称】: 恒温金属挠性的标准试验方法
【标准号】: ASTM B106-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008<
ASTM E1277-2008 用ICP发射光谱测定法对锌-5%铝-铈合金作化学分析的标准试验方法
【英文标准名称】: Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
【原文标准名称】: 用ICP发射光谱测定法对锌-5%铝-铈合金作化学分析的标准试验方法
【标准号】: ASTM E1277-2008
【标准
ASTM E1552-2008 使用直流等离子原子发射光谱法测定锆和锆合金中铪的标准试验方法
【英文标准名称】: Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasmax2014;Atomic Emission Spectrometry
【原文标准名称】: 使用直流等离子原子发射光谱法测定锆和锆合金中铪的标准试验方法
【标准号】: ASTM E1552-20
ASTM E2575-2008 铜和铜合金中氧含量测定的标准试验方法
【英文标准名称】: Standard Test Method for Determination of Oxygen in Copper and Copper Alloys
【原文标准名称】: 铜和铜合金中氧含量测定的标准试验方法
【标准号】: ASTM E2575-2008
【标准状态】: 现行
【国别】: 美国
ASTM A814/A814M-2008 冷加工焊接奥氏体不锈钢管的标准规范
【英文标准名称】: Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
【原文标准名称】: 冷加工焊接奥氏体不锈钢管的标准规范
【标准号】: ASTM A814/A814M-2008
【标准状态】: 现行
【国别】: 美国
ASTM B921-2008 铝和铝合金上覆盖的非六价铬层的标准规范
【英文标准名称】: Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
【原文标准名称】: 铝和铝合金上覆盖的非六价铬层的标准规范
【标准号】: ASTM B921-2008
【标准状态】: 现行
ASTM E709-2008 磁粒子检查标准指南
【英文标准名称】: Standard Guide for Magnetic Particle Testing
【原文标准名称】: 磁粒子检查标准指南
【标准号】: ASTM E709-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日
ASTM B122/B122M-2008 铜镍锌合金(镍银)及铜镍合金板、薄板、带材和轧制棒材的标准规格
【英文标准名称】: Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
【原文标准名称】: 铜镍锌合金(镍银)及铜镍合金板、薄板、带材和轧制棒材的标准规格
【标准号】:
ASTM B100-2008 桥梁和其它结构用锻制铜合金轴承和膨胀中厚板及薄板的标准规范
【英文标准名称】: Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
【原文标准名称】: 桥梁和其它结构用锻制铜合金轴承和膨胀中厚板及薄板的标准规范
【标准号】: ASTM B100-2008