当前位置: 首页 > 协会标准 > ASTM 美国材料与试验协会 > ASTM G196-2008 连接材料耐磨损的标准试验方法
ASTM G196-2008 连接材料耐磨损的标准试验方法

ASTM G196-2008 连接材料耐磨损的标准试验方法

prev next

  • 商品货号:INFOEACH_80518
  • 商品品牌:美国材料与试验协会 ASTM
    商品重量:0克
  • 上架时间:2021-02-27
    商品点击数:5487
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Standard Test Method for Galling Resistance of Material Couples
【原文标准名称】: 连接材料耐磨损的标准试验方法
【标准号】: ASTM G196-2008
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2008
【实施或试行日期】:
【发布单位】: 美国材料与试验协会(US-ASTM)
【起草单位】: G02.40
【标准类型】: (Test Method)
【标准水平】: ()
【中文主题词】:
【英文主题词】: adhesive wear; galling; galling resistance; macroscopic surface damage; seized components; sliding metallic surfaces
【摘要】: This test method is designed to rank material couples in their resistance to the failure mode caused by galling and not merely to classify the surface appearance of sliding surfaces. This test method has been shown to have higher repeatability than Test Method G 98 in determining the galling resistance. Test Method G 98 can be used for initial ranking of galling resistance. 5.3 This test method should be considered when damaged (galled) surfaces render components non-serviceable. Experience has shown that galling is most prevalent in sliding systems that are slow moving and operate intermittently. The galling and seizure of threaded components is a classic example that this test method most closely simulates. 5.4 Other galling-prone examples include: sealing surfaces of valves that may leak excessively due to galling and pump wear rings that may function ineffectively due to galling. 5.5 If the equipment continues to operate satisfactorily and loses dimension gradually, then galling is not present, and the wear should be evaluated by a different test method. 5.6 This test method should not be used for quantitative or final design purposes, since many environmental factors influence the galling performance of materials in service. Lubrication, alignment, stiffness, and geometry are only some of the factors that can affect how materials perform. This test method has proven valuable in screening materials for prototypical testing that more closely simulates actual service conditions.1.1 This test method covers a laboratory test that ranks the galling resistance of material couples using a quantitative measure. Bare metals, alloys, nonmetallic materials, coatings, and surface modified materials may be evaluated by this test method. 1.2 This test method is not designed for evaluating the galling resistance of material couples sliding under lubricated conditions, because galling usually will not occur under lubricated sliding conditions using this test method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
【中国标准分类号】: H22
【国际标准分类号】: 77_040_10
【页数】: 6P.;A4
【正文语种】: 英语

相关资料