当前位置: 首页 > 协会标准 > IEC 国际电工委员会 > IEC 60793-1-47-2009 光纤.第1-47部分:测量方法和试验程序.挠度损耗
IEC 60793-1-47-2009 光纤.第1-47部分:测量方法和试验程序.挠度损耗

IEC 60793-1-47-2009 光纤.第1-47部分:测量方法和试验程序.挠度损耗

prev next

  • 商品货号:INFOEACH_80210
  • 商品品牌:国际电工委员会 IEC
    商品重量:0克
  • 上架时间:2020-01-30
    商品点击数:5049
  • 用户评价: comment rank 5
  • 本店售价:请咨询客服
  • 点击此处进入论坛自助下载

资料描述

【英文标准名称】: Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
【原文标准名称】: 光纤.第1-47部分:测量方法和试验程序.挠度损耗
【标准号】: IEC 60793-1-47-2009
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2009-03
【实施或试行日期】:
【发布单位】: 国际电工委员会(IX-IEC)
【起草单位】: IEC/SC 86A
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 衰减因子;尺寸;电气工程;纤维光学;挠性;损失;微度弯曲;宏观的;测量;测量技术;光波导;性能;灵敏度;测试
【英文主题词】: Attenuation factors;Dimensions;Electrical engineering;Fibre optics;Flexibility;Losses;Macrobending;Macroscopic;Measurement;Measuring techniques;Optical waveguides;Properties;Sensitivity;Testing
【摘要】: This part of IEC 60793 establishes uniform requirements for measuring the macrobendingloss of single-mode fibres (category B) at 1 550 nm or 1 625 nm, category A1 multimodefibres at 850 nm or 1 300 nm, and category A3 and A4 multimode fibres at 650 nm, 850 nm or1 300 nm, thereby assisting in the inspection of fibres and cables for commercial purposes.The standard gives two methods for measuring macrobending sensitivity:? Method A – Fibre winding, pertains to category B single-mode fibres and category A1multimode fibres.? Method B – Quarter circle bends, pertains to category A3 and A4 multimode fibres.For both of these methods, the optical power is measured using either the power monitoringor the cut-back technique.Methods A and B are expected to produce different results if they are applied to the samefibre. This is because the key difference between the two methods is the deployment,including the bend radius and amount of fibre that is bent. The reason for the difference isthat A3 and A4 multimode fibres are expected to be deployed in short lengths with relativelyfewer bends compared to single-mode and category A1 multimode fibres.In the following text, the “curvature radius” is defined as the radius of the suitable circularshaped support (e.g. mandrel or guiding groove on a flat surface) on which the fibre can bebent.
【中国标准分类号】: M33
【国际标准分类号】: 33_180_10
【页数】: 16P;A4
【正文语种】: 英语

标签

相关资料