北京市东城区幸福北里甲17号1-229 Tel: 010-67123753 E-mail: kefu@infoeach.com
ICP备案证书号:京ICP备14017250号-1
MIL-HDBK-17-3E (VOL. 3 OF 3), DEPARTMENT OF DEFENSE HANDBOOK: POLYMER MATRIX COMPOSITES - MATERIALS USAGE, DESIGN, AND ANALYSIS (25 FEB 1994)., This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This mandate is a DoD requirement only; it is not applicable to the Federal Aviation Administration (FAA) or other government agencies. Volume 3 of MIL-HDBK-17 provides methodologies and lessons learned for the design, manufacture, and analysis of composite structures and for utilization of the material data provided in Volume II consistent with the guidance provided in Volume I. The information provided is included primarily as background and as a basis for consistent use of terminology, notation, and methodology and is not offered for regulatory purposes. The volume represents a compilation of the relevant composites design, manufacture, and analysis experience of engineers and scientists from industry, government, and academia. The scope of Volume 3 is limited to the introduction of concepts, methodologies, and potential pitfalls in the manufacture and analysis of composites. Chapter 2, Materials and Processes, defines major material systems and processing methods. Effects of various processing parameters on final composite product performance are emphasized. Chapter 3, Quality Control of Production Materials, reviews important issues related to quality control in the production of composite materials. It reviews recommended manufacturing inspection procedures and techniques for material property verification and statistical quality control. Chapter 4, Design and Analysis, addresses the design and analysis of various composite systems. It provides an overview of the current techniques and describes how the various constituent properties reported in MIL-HDBK-17 are used in the design and analysis of a composite system. From micromechanics to simple laminate constructions, it presents standard analyses which provide a common nomenclature and methodology basis for users of MIL-HDBK-17. Chapter 5, Design and Analysis of Structural Joints, describes accepted design procedures and analytical methods for determining stresses and deformations in structural joints for composite structures. Chapter 6, Structural Reliability, discusses some of the important factors affecting composite structure reliability including static strength, environmental effects, fatigue, and damage tolerance. Chapter 7, Thick-Section Composites, details methods of thick-section laminate analysis, thick-section structural analysis techniques, physical property requirements for three-dimensional analysis, experimental property determination techniques, and process simulation techniques and models. Chapter 8, Supportability, considers the design for and the design of repairs in composite structures based on maintainability and reliability. It provides guidelines to the designer of new structures with support- ability/maintainability in mind, and it provides the information relevant to cost-effective repair procedures. Appropriately concluding Volume 3 is Chapter 9, Lessons Learned, which addresses a variety of issues related to earlier topics providing a depository of knowledge gained from a number of involved contractors, agencies, and businesses.
MIL-HDBK-113C
MIL-HDBK-113C, MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (24 APR 1989)., This handbook establishes design guides for selection of suitable lubricant
MIL-HDBK-113C
MIL-HDBK-113C (NOTICE 1), MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (12 APR 2004)., MIL-HDBK-113C, dated 24 April 1989, has been reviewed and determ
MIL-HDBK-112
MIL-HDBK-112, MILITARY HANDBOOK: PUMPS, SELECTION AND APPLICATION (18 JAN 1978)., MIL-HDBK-112, dated 23 December 1964, is hereby canceled without replacement.
MIL-HDBK-110
MIL-HDBK-110 (NOTICE-1), MILITARY HANDBOOK, CHAINS, POWER TRANSMISSION AND CONVEYING, APPLICATION, INSTALLATION, AND MAINTENANCE (1 FEB 1982).
MIL-HDBK-109
MIL-HDBK-109 (H-109), QUALITY CONTROL AND RELIABILITY - STATISTICAL PROCEDURES FOR DETERMINING VALIDITY OF SUPPLIERS ATTRIBUTES INSPECTION OF. This purpose of this handbook is to provide appropriate statistical tests and tables of critical values to De
MIL-HDBK-108
This handbook (interim) was developed by the Bureau of Naval E=Weapons, Department of the Navy on behalf of the Office of the Assistant Secretary of Defense (Supply/Logistics). It was prepared to meet a growing need for the use of standard sampling pla
MIL-HDBK-107
MIL-HDBK-107 (NOTICE 1), INSPECTION QUALITY CONTROL SINGLE LEVEL CONTINUOUS SAMPLING PROCEDURES & TABLES FOR INSPECTION BY ATTRIBUTES (11 FEB 1983) [S/S BY MIL-STD-1235]., MIL-HDBK-107, dated 30 April 1959, is hereby canceled. MIL-STD-1235 provides
MIL-HDBK-103AD
MIL-HDBK-103AD, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (26 MAR 2009)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-HDBK-103AB
MIL-HDBK-103AB, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 MAR 2008)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-HDBK-103AA
MIL-HDBK-103AA, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 SEP 2007)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-A-166C
MIL-A-166C, MILITARY SPECIFICATION: AMMONIUM PICRATE (EXPLOSIVE D) (06 JAN 1975) [SUPERSEDING MIL-A-00166B (MU) AND JAN-A-166A]., This specification covers one type of Ammonium Picrate (Explosive D) intended for use in ammunition.
MIL-A-166C (N
MIL-A-159D
MIL-A-159D, MILITARY SPECIFICATION: ANTIMONY SULFIDE (FOR USE IN AMMUNITION) (10 MAY 1972)., This specification covers two types and five classes of antimony sulfide.
MIL-PRF-680B
MIL-PRF-680B, PERFORMANCE SPECIFICATION DEGREASING SOLVENT (26 OCT 2006)., This
specification covers degreasing solvent that consists of four types of petroleum
distillates. The different types are referred to as "S
MIL-PRF-131K
MIL-PRF-131K, PERFORMANCE SPECIFICATION: BARRIER MATERIALS, WATER VAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE (18 AUG 2005) [SUPERSEDING MIL-B-131H]., This specification covers the requirements for heat-sealable, greaseproof, flexible barrier mate
MIL-PRF-131J
MIL-PRF-131J, PERFORMANCE SPECIFICATION: BARRIER MATERIALS, WATER VAPOR-PROOF, GREASE-PROOF, FLEXIBLE, HEAT-SEALABLE (26 AUG 1998)SUPERSEDING MIL-B-131H]., This specification covers the requirements for heat-sealable, greaseproof, flexible barrier mate
MIL-PRF-123D
MIL-PRF-123D, PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR (28 SEP 2007) [SUPERSEDING MIL-C-123A]., This specification covers the general require
MIL-PRF-123C
MIL-PRF-123C, PERFORMANCE SPECIFICATION, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, GENERAL SPECIFICATION FOR (27 MAR 2003)., This specification covers the general requirements for high reliabilit
MIL-PRF-123/16A
MIL-PRF-123/16A, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATUR STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS22 (18 JUN 2001)., This specification is approved for use by all Departments and Agencie
MIL-PRF-123/13C
MIL-PRF-123/13C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATUR STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS54 (18 JUN 2001)., This specification is approved for use by all Departments and Agen
MIL-PRF-123/12C
MIL-PRF-123/12C, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS52 (18 JUN 2001)., This specification is approved for use by all Departments and Ag
MIL-PRF-123/11C
MIL-PRF-123/11C, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS52 (18 JUN 2001)., This specification is approved for use by all Departments and Ag
MIL-PRF-123/10B
MIL-PRF-123/10B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, NONLEADED, STYLE CKS51 (18 JUN 2001)., This specification is approved for use by all Departments and Ag
MIL-PRF-123/8B
MIL-PRF-123/8B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS16 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/7C
MIL-PRF-123/7C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS15 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/6C
MIL-PRF-123/6C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS14 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/5B
MIL-PRF-123/5B, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS12 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/4C
MIL-PRF-123/4C, PERFORMANCE SPECIFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS11 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/3D
MIL-PRF-123/3D, PERFORMANCE SPEFICICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC, (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, LEADED, STYLE CKS07 (18 JUN 2001)., This specification is approved for use by all Departments and Agenci
MIL-PRF-123/1C
MIL-PRF-123/1C, PERFORMANCE SPEFICATION SHEET, CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPARATURE STABLE AND GENERAL PURPOSE), HIGH RELIABILITY, STYLE CKS05 (18 JUN 2001)., This specification is approved for use by all Departments and Agencies of the D
MIL-PRF-122A (AMENDMENT 4)
MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].