资料描述
【英文标准名称】: Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
【原文标准名称】: 木结构.机械紧固件接头试验.木材密度要求
【标准号】: ISO 8970-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2010-06
【实施或试行日期】:
【发布单位】: 国际标准化组织(IX-ISO)
【起草单位】: ISO/TC 165
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 体密度;建筑;密度;紧固件;连接件;机械测试;建筑用木料;试样;测试;木结构;木构件接头
【英文主题词】: Bulk density;Construction;Density;Fasteners;Joints;Mechanical testing;Structural timber;Test specimens;Testing;Timber construction;Timber joints
【摘要】: This International Standard specifies a method, based on density, for the selection of pieces of wood used indetermining the strength and stiffness properties of connections made with mechanical fasteners.It is assumed the wood density is normally distributed and that any deviations are reported.This International Standard is applicable only to specimens of wood.
【中国标准分类号】: P23
【国际标准分类号】: 79_040;91_080_20
【页数】: 8P.;A4
【正文语种】: 英语
ISO 8970-2010 木结构.机械紧固件接头试验.木材密度要求
【英文标准名称】: Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
【原文标准名称】: 木结构.机械紧固件接头试验.木材密度要求
【标准号】: ISO 8970-2010
【标准状态】: 现行
ISO 10845-3-2011 建筑采购.第3部分:投标的标准条件
【英文标准名称】: Construction procurement.Part 3: Standard conditions of tender
【原文标准名称】: 建筑采购.第3部分:投标的标准条件
【标准号】: ISO 10845-3-2011
【标准状态】: 现行
【国别】: 国际
【发布日期
ISO 10845-2-2011 建筑采购.第2部分:采购文件的格式编排和编制
【英文标准名称】: Construction procurement.Part 2:Formatting and compilation of procurement documentation
【原文标准名称】: 建筑采购.第2部分:采购文件的格式编排和编制
【标准号】: ISO 10845-2-2011
【标准状态】: 现行
【国别】:
ISO 10302-1-2011 声学.小型通风装置辐射空气噪声的测量.第1部分:空气噪声测量
【英文标准名称】: Acoustics.Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices.Part 1: Airborne noise measurement
【原文标准名称】: 声学.小型通风装置辐射空气噪声的测量.第1部分:空气噪声测量
【标准号】: IS
ISO 3927-2011 除硬质合金粉末外的金属粉末.单轴向压缩的压缩性测定
【英文标准名称】: Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
【原文标准名称】: 除硬质合金粉末外的金属粉末.单轴向压缩的压缩性测定
【标准号】: ISO 3927-2011
【标准状态】: 现行
ISO 5000-2011 商用和抗拉品质的连续热浸镀铝-硅冷缩减碳素钢薄板
【英文标准名称】: Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
【原文标准名称】: 商用和抗拉品质的连续热浸镀铝-硅冷缩减碳素钢薄板
【标准号】: ISO 5000-2011
【标准状态】: 现行
ISO 4999-2011 商用,拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板
【英文标准名称】: Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
【原文标准名称】: 商用,拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板
【标准号】: ISO 4999-2011
ISO 4998-2011 结构质量的连续热浸锌覆层碳素薄钢板
【英文标准名称】: Continuous hot-dip zinc-coated carbon steel sheet of structural quality
【原文标准名称】: 结构质量的连续热浸锌覆层碳素薄钢板
【标准号】: ISO 4998-2011
【标准状态】: 现行
【国别】: 国际
ISO 3575-2011 商用和抗拉品质的连续热浸镀锌碳素钢薄板
【英文标准名称】: Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
【原文标准名称】: 商用和抗拉品质的连续热浸镀锌碳素钢薄板
【标准号】: ISO 3575-2011
【标准状态】: 现行
【国别】: 国际<
ISO 3987 Technical Corrigendum 1-2011 石油产品.润滑油和添加剂内的炽灼残渣的测定.技术勘误表1
【英文标准名称】: Petroleum products - Determination of sulfated ash in lubricating oils and additives; Technical Corrigendum 1
【原文标准名称】: 石油产品.润滑油和添加剂内的炽灼残渣的测定.技术勘误表1
【标准号】: ISO 3987 Technical Corrigendum 1-2011
ISO 1716-2010 产品耐火试验反应.总燃烧热力的测定(热值)
【英文标准名称】: Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value)
【原文标准名称】: 产品耐火试验反应.总燃烧热力的测定(热值)
【标准号】: ISO 1716-2010
【标准状态】: 现行
ISO 22621-6-2010 最大操作电压小于并且包括2 MPa(20 bar)的燃料气体供应用塑料管道系统.聚酰胺(PA).第6部分:设计、操作和安装实施规程
【英文标准名称】: Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) - Polyamide (PA) - Part 6: Code of practice for design, handling and installation
【原文标准名称】: 最大操作电
ISO 22621-5-2010 最大操作电压小于并且包括2 MPa(20 bar)的燃料气体供应用塑料管道系统.聚酰胺(PA).第5部分:系统适用性
【英文标准名称】: Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) - Polyamide (PA) - Part 5: Fitness for purpose of the system
【原文标准名称】: 最大操作电压小于并且包括2 MPa(20 bar)的
ISO 21927-2 AMD 1-2010 烟和热控制系统.第2部分:烟和热的自然排放通风设备规范.修改件1
【英文标准名称】: Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators; Amendment 1
【原文标准名称】: 烟和热控制系统.第2部分:烟和热的自然排放通风设备规范.修改件1
【标准号】: ISO 21927-2 AMD 1-2010
ISO 21927-3 AMD 1-2010 烟和热控制系统.第3部分:动力性通风设备烟热排放规范.修改件1
【英文标准名称】: Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators; Amendment 1
【原文标准名称】: 烟和热控制系统.第3部分:动力性通风设备烟热排放规范.修改件1
【标准号】: ISO 21927-3 AMD 1-2010
ISO 29481-1-2010 建筑物信息建模.信息配送手册.第1部分:格式和方法体系
【英文标准名称】: Building information modelling - Information delivery manual - Part 1: Methodology and format
【原文标准名称】: 建筑物信息建模.信息配送手册.第1部分:格式和方法体系
【标准号】: ISO 29481-1-2010
【标准状态】: 现行
ISO 22389-1-2010 木结构.I形梁弯曲强度.第1部分:试验、评价和特征描述
【英文标准名称】: Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
【原文标准名称】: 木结构.I形梁弯曲强度.第1部分:试验、评价和特征描述
【标准号】: ISO 22389-1-2010
【标准状态】: 现行
ISO/TR 21828-2010 单片电路,不定形耐火产品制备和测试用标准指南
【英文标准名称】: Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
【原文标准名称】: 单片电路,不定形耐火产品制备和测试用标准指南
【标准号】: ISO/TR 21828-2010
【标准状态】: 现行
ISO 21931-1-2010 房屋建筑的可持续性.建筑工程的环境性能的评价方法用结构.第1部分:建筑物
【英文标准名称】: Sustainability in building construction - Framework for methods of assessment of the environmental performance of construction works - Part 1: Buildings
【原文标准名称】: 房屋建筑的可持续性.建筑工程的环境性能的评价方法用结构.第1部分:建筑物
【标准
ISO 13264-2010 无压地下排水和污水系统用热塑管道系统.热塑性塑料配件.装配式配件的机械强度或弹性用试验方法
【英文标准名称】: Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
【原文标准名称】: 无压地下排水和污水系统用热塑管道系统.热塑性塑料配件.
ISO 13257-2010 无压设施用热塑塑料系统.耐高温循环的试验方法
【英文标准名称】: Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
【原文标准名称】: 无压设施用热塑塑料系统.耐高温循环的试验方法
【标准号】: ISO 13257-2010
【标准状态】
ISO 13263-2010 无压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法
【英文标准名称】: Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
【原文标准名称】: 无压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法
【标准号】: ISO
ISO 12344-2010 建筑物应用隔热产品.弯曲行为测定
【英文标准名称】: Thermal insulating products for building applications - Determination of bending behaviour
【原文标准名称】: 建筑物应用隔热产品.弯曲行为测定
【标准号】: ISO 12344-2010
【标准状态】: 现行
【国别】:
ISO/TR 25743-2010 升降机(电梯).紧急情况中撤离疏散用升降机使用的安全性
【英文标准名称】: Lifts (elevators) - Study of the use of lifts for evacuation during an emergency
【原文标准名称】: 升降机(电梯).紧急情况中撤离疏散用升降机使用的安全性
【标准号】: ISO/TR 25743-2010
【标准状态】: 现行
【国别】:
ISO/IEC TR 29107-1-2010 信息技术.智能住宅.规范分类法.第1部分:设计图
【英文标准名称】: Information technology - Intelligent homes - Taxonomy of specifications - Part 1: The scheme
【原文标准名称】: 信息技术.智能住宅.规范分类法.第1部分:设计图
【标准号】: ISO/IEC TR 29107-1-2010
【标准状态】: 现行
ISO 9533-2010 土方机械.机械安装的音响行进报警和前进喇叭.试验方法和性能标准
【英文标准名称】: Earth-moving machinery - Machine-mounted audible travel alarms and forward horns - Test methods and performance criteria
【原文标准名称】: 土方机械.机械安装的音响行进报警和前进喇叭.试验方法和性能标准
【标准号】: ISO 9533-2010
ISO 17631 AMD 1-2010 船舶和海上技术.消防,救生设备和逃生设施用船上方案.高速船的特定要求.修改件1
【英文标准名称】: Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape - Amendment 1: Requirements specific to high speed crafts
【原文标准名称】: 船舶和海上技术.消防,救生设备和逃生设施用船上方案.高速船的特定要求.修改件1
ISO 3500 AMD 1-2010 气瓶.船舶上安装的固定式防火用CO2无缝钢气瓶.修改件1
【英文标准名称】: Gas cylinders - Seamless steel CO cylinders for fixed fire-fighting installations on ships; Amendment 1
【原文标准名称】: 气瓶.船舶上安装的固定式防火用CO2无缝钢气瓶.修改件1
【标准号】: ISO 3500 AMD 1-2010
【标准状态】:
ISO 8721-2010 道路车辆.碰撞试验测量技术.光学仪器设备
【英文标准名称】: Road vehicles - Measurement techniques in impact tests - Optical instrumentation
【原文标准名称】: 道路车辆.碰撞试验测量技术.光学仪器设备
【标准号】: ISO 8721-2010
【标准状态】: 现行
【国别】: 国际
ISO 16750-5-2010 道路车辆.电气和电子设备的环境条件和试验.第5部分:化学药品装载量
【英文标准名称】: Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
【原文标准名称】: 道路车辆.电气和电子设备的环境条件和试验.第5部分:化学药品装载量
【标准号】: ISO 16750-5-2010