资料描述
【英文标准名称】: Road vehicles - Calibration fluids for diesel injection equipment
【原文标准名称】: 道路车辆.柴油机喷油装置校准液体
【标准号】: ISO 4113-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2010-06
【实施或试行日期】:
【发布单位】: 国际标准化组织(IX-ISO)
【起草单位】: ISO/TC 22
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 芳族化合物;机动车燃料;校正;校准液体;化学性质;始凝点;颜色;含量;腐蚀;防腐蚀;腐蚀试验;交货条件;含量测定;柴油机;柴油发动机;闪点;发泡能力;燃料喷射器;喷射设备;喷射泵;内燃机;汽车;石油产品;性能;道路车辆;防锈;规范(验收);规范;试验油;试验;试验流体;粘度;含水量
【英文主题词】: Aromatic compounds;Automotive fuels;Calibration;Calibration fluids;Chemical properties;Cloud point;Colour;Content;Corrosion;Corrosion protection;Corrosion tests;Delivery conditions;Determination of content;Diesel;Diesel engines;Flash point;Foaming power;Fuel injectors;Injection equipment;Injection pumps;Internal combustion engines;Motor vehicles;Petroleum products;Properties;Road vehicles;Rust protection;Specification (approval);Specifications;Test oils;Testing;Testing fluids;Viscosity;Water content
【摘要】: This International Standard specifies the requirements for calibration fluids, i.e. a basic fluid and a closer value(CV) fluid, intended for testing and calibrating diesel fuel injection equipment in production, in service, and inlaboratories. The CV calibration fluid requires a closer tolerance range for kinematic viscosity and density, andcan be specified to enhance the accuracy of the calibration setting.This International Standard also allows the specification of an anti-wear (AW) requirement in order to aid therunning-in of diesel fuel injection equipment.
【中国标准分类号】: R17;T13
【国际标准分类号】: 43_060_40;43_180
【页数】: 10P.;A4
【正文语种】: 英语
ISO 4113-2010 道路车辆.柴油机喷油装置校准液体
【英文标准名称】: Road vehicles - Calibration fluids for diesel injection equipment
【原文标准名称】: 道路车辆.柴油机喷油装置校准液体
【标准号】: ISO 4113-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】
ISO 10845-2-2011 建筑采购.第2部分:采购文件的格式编排和编制
【英文标准名称】: Construction procurement.Part 2:Formatting and compilation of procurement documentation
【原文标准名称】: 建筑采购.第2部分:采购文件的格式编排和编制
【标准号】: ISO 10845-2-2011
【标准状态】: 现行
【国别】:
ISO 10302-1-2011 声学.小型通风装置辐射空气噪声的测量.第1部分:空气噪声测量
【英文标准名称】: Acoustics.Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices.Part 1: Airborne noise measurement
【原文标准名称】: 声学.小型通风装置辐射空气噪声的测量.第1部分:空气噪声测量
【标准号】: IS
ISO 3927-2011 除硬质合金粉末外的金属粉末.单轴向压缩的压缩性测定
【英文标准名称】: Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
【原文标准名称】: 除硬质合金粉末外的金属粉末.单轴向压缩的压缩性测定
【标准号】: ISO 3927-2011
【标准状态】: 现行
ISO 5000-2011 商用和抗拉品质的连续热浸镀铝-硅冷缩减碳素钢薄板
【英文标准名称】: Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
【原文标准名称】: 商用和抗拉品质的连续热浸镀铝-硅冷缩减碳素钢薄板
【标准号】: ISO 5000-2011
【标准状态】: 现行
ISO 4999-2011 商用,拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板
【英文标准名称】: Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
【原文标准名称】: 商用,拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板
【标准号】: ISO 4999-2011
ISO 4998-2011 结构质量的连续热浸锌覆层碳素薄钢板
【英文标准名称】: Continuous hot-dip zinc-coated carbon steel sheet of structural quality
【原文标准名称】: 结构质量的连续热浸锌覆层碳素薄钢板
【标准号】: ISO 4998-2011
【标准状态】: 现行
【国别】: 国际
ISO 3575-2011 商用和抗拉品质的连续热浸镀锌碳素钢薄板
【英文标准名称】: Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
【原文标准名称】: 商用和抗拉品质的连续热浸镀锌碳素钢薄板
【标准号】: ISO 3575-2011
【标准状态】: 现行
【国别】: 国际<
ISO 3987 Technical Corrigendum 1-2011 石油产品.润滑油和添加剂内的炽灼残渣的测定.技术勘误表1
【英文标准名称】: Petroleum products - Determination of sulfated ash in lubricating oils and additives; Technical Corrigendum 1
【原文标准名称】: 石油产品.润滑油和添加剂内的炽灼残渣的测定.技术勘误表1
【标准号】: ISO 3987 Technical Corrigendum 1-2011
ISO 22840-2010 智能运输系统.援助倒车操纵的设备.支持援助系统扩展范围(ERBA)
【英文标准名称】: Intelligent transport systems - Devices to aid reverse manoeuvres - Extended-range backing aid systems (ERBA)
【原文标准名称】: 智能运输系统.援助倒车操纵的设备.支持援助系统扩展范围(ERBA)
【标准号】: ISO 22840-2010
【标准状态】
ISO 4513-2010 道路车辆.能见度.驾驶员眼睛位置的眼睛活动范围的确定方法
【英文标准名称】: Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location
【原文标准名称】: 道路车辆.能见度.驾驶员眼睛位置的眼睛活动范围的确定方法
【标准号】: ISO 4513-2010
【标准状态】: 现行
ISO 8710-2010 摩托车.刹车和制动系统.试验和测量方法
【英文标准名称】: Motorcycles - Brakes and brake systems - Tests and measurement methods
【原文标准名称】: 摩托车.刹车和制动系统.试验和测量方法
【标准号】: ISO 8710-2010
【标准状态】: 现行
【国别】: 国际
ISO 8709-2010 轻便摩托车.制动和制动系统.试验和测量方法
【英文标准名称】: Mopeds - Brakes and brake systems - Tests and measurement methods
【原文标准名称】: 轻便摩托车.制动和制动系统.试验和测量方法
【标准号】: ISO 8709-2010
【标准状态】: 现行
【国别】: 国际
【
ISO 11026-2010 重型商用车辆和公共汽车.转动稳定性试验方法.闭合曲线试验
【英文标准名称】: Heavy commercial vehicles and buses - Test method for roll stability - Closing-curve test
【原文标准名称】: 重型商用车辆和公共汽车.转动稳定性试验方法.闭合曲线试验
【标准号】: ISO 11026-2010
【标准状态】: 现行
ISO/TS 19713-2-2010 道路车辆.内燃机和压缩机用进气口空气净化设备.第2部分:用粗颗粒测试分数效率(5 m至40 m光学直径)
【英文标准名称】: Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 2: Fractional efficiency testing with coarse particles (5 ?m to 40 ?m optical diameter)
【原文标准名称】: 道路车辆.内燃机和压缩机用进气口空气净化设备
ISO/TS 19713-1-2010 道路车辆.内燃机和压缩机用进气口空气净化设备.第1部分:用微粒子测试分数效率(0.3 m至5 m光学直径)
【英文标准名称】: Road vehicles - Inlet air cleaning equipment for internal combustion engines and compressors - Part 1: Fractional efficiency testing with fine particles (0,3 ?m to 5 ?m optical diameter)
【原文标准名称】: 道路车辆.内燃机和压缩机用进气口空气净化设备.
ISO/TS 14907-1 Technical Corrigendum 1-2010 电子收费.用户和固定设备的试验规程.第1部分:试验规程描述.技术勘误表1
【英文标准名称】: Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures; Technical Corrigendum 1
【原文标准名称】: 电子收费.用户和固定设备的试验规程.第1部分:试验规程描述.技术勘误表1
【标准号】: ISO/TS
ISO 24101-2-2010 智能运输系统.车间通信信道(CALM).应用管理.第2部分:合格试验
【英文标准名称】: Intelligent transport systems - Communications access for land mobiles (CALM) - Application management - Part 2: Conformance test
【原文标准名称】: 智能运输系统.车间通信信道(CALM).应用管理.第2部分:合格试验
【标准号】: ISO 24101-2-2010<
ISO 21217-2010 智能运输系统.地面移动通讯用通信接入(CALM).体系结构
【英文标准名称】: Intelligent transport systems - Communications access for land mobiles (CALM) - Architecture
【原文标准名称】: 智能运输系统.地面移动通讯用通信接入(CALM).体系结构
【标准号】: ISO 21217-2010
【标准状态】: 现行
ISO 12573-2010 航空器.管道系统公差.英制系列
【英文标准名称】: Aircraft - Tubing tolerances - Inch series
【原文标准名称】: 航空器.管道系统公差.英制系列
【标准号】: ISO 12573-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2010-09
ISO 12273-2010 航空航天.等级为:900 MPa(环境温度)/235℃、900 MPa(环境温度)/315℃和900 MPa(环境温度)/425℃,带MJ螺纹自调准双耳游动托板自锁螺母.尺寸规格
【英文标准名称】: Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/4
ISO 26872-2010 空间系统.对地同步高度卫星操作处理
【英文标准名称】: Space systems - Disposal of satellites operating at geosynchronous altitude
【原文标准名称】: 空间系统.对地同步高度卫星操作处理
【标准号】: ISO 26872-2010
【标准状态】: 现行
【国别】: 国际
ISO 11639-2010 航空航天.软组件零件号码
【英文标准名称】: Aerospace - Part numbering for hose assemblies
【原文标准名称】: 航空航天.软组件零件号码
【标准号】: ISO 11639-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2010-06
ISO 23461-2010 航天系统.计划管理.不一致性控制系统
【英文标准名称】: Space systems - Programme management - Non-conformance control system
【原文标准名称】: 航天系统.计划管理.不一致性控制系统
【标准号】: ISO 23461-2010
【标准状态】: 现行
【国别】: 国际
ISO 16192-2010 航天系统.空间计划中的经验获取(经验学习).原则和指南
【英文标准名称】: Space systems - Experience gained in space projects (Lessons learned) - Principles and guidelines
【原文标准名称】: 航天系统.空间计划中的经验获取(经验学习).原则和指南
【标准号】: ISO 16192-2010
【标准状态】: 现行
ISO 11231-2010 空间系统.概率性风险评价(PRA)
【英文标准名称】: Space systems - Probabilistic risk assessment (PRA)
【原文标准名称】: 空间系统.概率性风险评价(PRA)
【标准号】: ISO 11231-2010
【标准状态】: 现行
【国别】: 国际
【发布日期】: 2010-0
ISO 15769-2010 液体比重测定法.使用多普勒效应和回声对比法对声速测定计的应用指南
【英文标准名称】: Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
【原文标准名称】: 液体比重测定法.使用多普勒效应和回声对比法对声速测定计的应用指南
【标准号】: ISO 15769-2010
ISO/TS 22745-35-2010 工业自动化系统和集成.开放技术字典及其在主数据上的应用.第35部分:特征数据的查询
【英文标准名称】: Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 35: Query for characteristic data
【原文标准名称】: 工业自动化系统和集成.开放技术字典及其在主数据上的应用.第35部分:特征数据的查询
ISO/TS 22745-40-2010 工业自动化系统和集成.开放技术字典及其在主数据上的应用.第40部分:主数据表示法
【英文标准名称】: Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 40: Master data representation
【原文标准名称】: 工业自动化系统和集成.开放技术字典及其在主数据上的应用.第40部分:主数据表示法
【