资料描述
【英文标准名称】: Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
【原文标准名称】: 表面活性剂(原料)的分析.第4部分:乙基氧化加成化合物.第3节:氧化乙烯基的测定方法
【标准号】: BS 6829 Sec.4.3-1990
【标准状态】: 作废
【国别】: 英国
【发布日期】: 1990-01-31
【实施或试行日期】:
【发布单位】: 英国标准学会(BSI)
【起草单位】:
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 容量分析;试验设备;表面活性剂;化学分析和试验;乙醇盐;试验条件;含量测定;再现性;干扰(化学);原材料;氧化乙烯;碘滴定法
【英文主题词】:
【摘要】:
【中国标准分类号】: G72
【国际标准分类号】:
【页数】: 8P;A4
【正文语种】: 英语
BS 6829 Sec.1.4-1990 表面活性剂(原料)的分析.第1部分:一般方法.第4节:水溶液pH值测定方法
【英文标准名称】: Analysis of surface active agents (raw materials). General methods. Method for determination of the pH of an aqueous solution
【原文标准名称】: 表面活性剂(原料)的分析.第1部分:一般方法.第4节:水溶液pH值测定方法
【标准号】: BS 6829 Sec.1.4-19
BS 1435-2-1990 抽油和排油用橡胶软管组件.第2部分:贮存、试验和使用推荐标准
【英文标准名称】: Rubber hose assemblies for oil suction and discharge services - Recommendations for storage, testing and use
【原文标准名称】: 抽油和排油用橡胶软管组件.第2部分:贮存、试验和使用推荐标准
【标准号】: BS 1435-2-1990
【标准状态】:
BS 3227-1990 丁基橡胶混合料(包括卤化丁基橡胶混合料)规范
【英文标准名称】: Specification for butyl rubber compounds (including halobutyl compounds)
【原文标准名称】: 丁基橡胶混合料(包括卤化丁基橡胶混合料)规范
【标准号】: BS 3227-1990
【标准状态】: 作废
【国别】: 英国
BS 4591-1990 有机液体(石油产品除外)蒸馏特性的测定方法
【英文标准名称】: Method for determination of distillation characteristics of organic liquids (other than petroleum products)
【原文标准名称】: 有机液体(石油产品除外)蒸馏特性的测定方法
【标准号】: BS 4591-1990
【标准状态】: 现行
BS 5350-C5-1990 粘合剂的试验方法.粘结部位的机械试验.抗纵向剪切粘结强度的测定
【英文标准名称】: Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in longitudinal shear
【原文标准名称】: 粘合剂的试验方法.粘结部位的机械试验.抗纵向剪切粘结强度的测定
【标准号】: BS 5350-C5-1990
BS 2924-4-1990 纸、纸板和纸浆的水解萃取物.第4部分:水可溶氯化物的通用测定方法
【英文标准名称】: Aqueous extracts of paper, board and pulp. General method for determination of water-soluble chlorides
【原文标准名称】: 纸、纸板和纸浆的水解萃取物.第4部分:水可溶氯化物的通用测定方法
【标准号】: BS 2924-4-1990
【标准状态】: 作废
BS 2752-1990 氯丁二烯橡胶合成物规范
【英文标准名称】: Specification for chloroprene rubber compounds
【原文标准名称】: 氯丁二烯橡胶合成物规范
【标准号】: BS 2752-1990
【标准状态】: 作废
【国别】: 英国
【发布日期】: 1990-11-30
BS 7134-4.1-1990 工程陶瓷试验.热物理性能.热膨胀测定方法
【英文标准名称】: Testing of engineering ceramics - Thermo-physical properties - Method for determination of thermal expansion
【原文标准名称】: 工程陶瓷试验.热物理性能.热膨胀测定方法
【标准号】: BS 7134-4.1-1990
【标准状态】: 作废
BS 7134 Pt.4 Sec.4.2-1990 工程陶瓷试验.热物理性能.用激光闪光(或热脉冲)法测定热扩散性的方法
【英文标准名称】: Testing of engineering ceramics. Thermo-physical properties. Method for the determination of thermal diffusivity, by the laser flash (or heat pulse) method
【原文标准名称】: 工程陶瓷试验.热物理性能.用激光闪光(或热脉冲)法测定热扩散性的方法
【标
BS 6100 Pt.1 Sec.1.4 SubSec.1.4.1-1990 建筑及土木工程术语词汇.总则与其他.材料.门窗玻璃
【英文标准名称】: Glossary of building and civil engineering terms. General and miscellaneous. Materials. Glazing
【原文标准名称】: 建筑及土木工程术语词汇.总则与其他.材料.门窗玻璃
【标准号】: BS 6100 Pt.1 Sec.1.4 SubSec.1.4.1-1990
【标准状
BS 7319-8-1990 工业用氯化钠的分析方法.第8部分:铅含量的测定方法
【英文标准名称】: Analysis of sodium chloride for industrial use - Method for determination of lead content
【原文标准名称】: 工业用氯化钠的分析方法.第8部分:铅含量的测定方法
【标准号】: BS 7319-8-1990
【标准状态】: 现行
【国
BS 7134 Sec.3.5-1990 工程陶瓷试验.第3部分:热机制性能.第5节:高温塑性变形(凹凸)测定方法
【英文标准名称】: Testing of engineering ceramics. Thermo-mechanical properties. Methods for determination of pyroplastic deformation (sagging)
【原文标准名称】: 工程陶瓷试验.第3部分:热机制性能.第5节:高温塑性变形(凹凸)测定方法
【标准号】: BS 7134 Sec.3.5-199
BS 7376-1990 工作台或手推车结构内玻璃含物规范
【英文标准名称】: Specification for inclusion of glass in the construction of tables or trolleys
【原文标准名称】: 工作台或手推车结构内玻璃含物规范
【标准号】: BS 7376-1990
【标准状态】: 作废
【国别】: 英国
BS 6717 Pt.3-1990 预制混凝土铺路砖.第3部分:铺筑运动场实用规则
【英文标准名称】: Precast concrete paving blocks. Code of practice for laying
【原文标准名称】: 预制混凝土铺路砖.第3部分:铺筑运动场实用规则
【标准号】: BS 6717 Pt.3-1990
【标准状态】: 作废
【国别】: 英国
【
BS 7263 Pt.1-1990 预制混凝土铺路板、路缘石、沟槽、镶边件和扇形板.第1部分:规范
【英文标准名称】: Precast concrete flags, kerbs, channels edgings and quadrants. Specification
【原文标准名称】: 预制混凝土铺路板、路缘石、沟槽、镶边件和扇形板.第1部分:规范
【标准号】: BS 7263 Pt.1-1990
【标准状态】: 作废
【国别】:
BS 7134 Sec.4.2-1990 工程陶瓷试验.第4部分:热物理性能.第2节:用激光闪光(或热脉冲)法测定热扩散性的方法
【英文标准名称】: Testing of engineering ceramics. Thermo-physical properties. Method for the determination of thermal diffusivity, by the laser flash (or heat pulse) method
【原文标准名称】: 工程陶瓷试验.第4部分:热物理性能.第2节:用激光闪光(或热脉冲)法测定热扩散性的方法
BS 7134 Sec.4.1-1990 工程陶瓷试验.第4部分:热物理参数.第1节:热膨胀测定方法
【英文标准名称】: Testing of engineering ceramics. Thermo-physical properties. Method for determination of thermal expansion
【原文标准名称】: 工程陶瓷试验.第4部分:热物理参数.第1节:热膨胀测定方法
【标准号】: BS 7134 Sec.4.1-1990
【标准状态】:
BS 473-1990 混凝土屋面瓦和配件规范
【英文标准名称】: Specification for concrete roofing tiles and fittings
【原文标准名称】: 混凝土屋面瓦和配件规范
【标准号】: BS 473-1990
【标准状态】: 作废
【国别】: 英国
【发布日期】: 1990-02-28
BS 812 Sec.105.1-1990 集料试验.第105部分:颗粒形状的测定方法.第1节:成片性指数
【英文标准名称】: Testing aggregates. Methods for determination of particle shape. Flakiness index
【原文标准名称】: 集料试验.第105部分:颗粒形状的测定方法.第1节:成片性指数
【标准号】: BS 812 Sec.105.1-1990
【标准状态】: 作废
BS 5503-3-1990 水平出水口釉陶瓷抽水马桶规范.第3部分:最大冲洗储水量为7.5L的水平出水口抽水马桶规范
【英文标准名称】: Vitreous china washdown WC pans with horizontal outlet - Specification for WC pans with horizontal outlet for use with 7.5 L maximum flush capacity cisterns
【原文标准名称】: 水平出水口釉陶瓷抽水马桶规范.第3部分:最大冲洗储水量为7.5L的水平出水口抽水马桶规范