资料描述
【英文标准名称】: Telecontrol equipment and systems - Transmission protocols - Transmission frame formats
【原文标准名称】: 遥控设备和系统.传输协议.传输框架格式
【标准号】: BS EN 60870-5-1-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1991-10-31
【实施或试行日期】: 1991-10-31
【发布单位】: 英国标准学会(GB-BSI)
【起草单位】: BSI
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 控制系统;数据格式;数据处理;数据结构;数据传送;数据传输;数据传输方法;电气工程;编码;开式系统;开放系统互连(OSI);协议;记录;遥控系统;遥控技术;信号传输;规范(验收);同步;远程控制设备;远程控制系统;传输格式;帧传输格式;传输协议;白层
【英文主题词】: Control systems;Data formats;Data processing;Data structures;Data transfer;Data transmission;Data transmission methods;Electrical engineering;Encoding;Open systems;OSI;Protocols;Records;Remote control systems;Remote control technology;Signal transmission;Specification (approval);Synchronization;Telecontrol equipment;Telecontrol systems;Transmission format;Transmission frame formats;Transmission protocol;White layers
【摘要】: Covers asynchronous data transmission with half duplex and duplex link protocols operating with window size one for message transfers. Specifies standards on coding, formatting and synchronizing data frames of variable and fixed lengths which meet specified data integrity requirements.
【中国标准分类号】: M54
【国际标准分类号】: 35_240_50
【页数】: 52P.;A4
【正文语种】: 英语
BS ISO/IEC 9541-2-1991+A2-2009 信息技术.字体信息交换.互换格式
【英文标准名称】: Information technology - Font information interchange - Interchange format
【原文标准名称】: 信息技术.字体信息交换.互换格式
【标准号】: BS ISO/IEC 9541-2-1991+A2-2009
【标准状态】: 现行
【国别】:
BS 3531-5.7-1991 骨接合术用外科植入物.骨螺钉和辅助设备.钻头,丝锥和沉头铣刀的规格
【英文标准名称】: Implants for osteosynthesis - Bone screws and auxiliary equipment - Specification for drill bits, taps and countersink cutters
【原文标准名称】: 骨接合术用外科植入物.骨螺钉和辅助设备.钻头,丝锥和沉头铣刀的规格
【标准号】: BS 3531-5.7-1991
BS EN 60439-3-1991 低压开关装置和控制设备组件.第3部分:安装在便于技术不熟练人员使用的低压开关和控制设备组件的详细要求.配电板
【英文标准名称】: Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use - Distrib
BS EN 29519-1991 造船和海上建筑物.踏步阶梯级
【英文标准名称】: Shipbuilding and marine structures - Rungs for dog-step ladders
【原文标准名称】: 造船和海上建筑物.踏步阶梯级
【标准号】: BS EN 29519-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】:
BS EN 29367-1-1991 滚装船汽车捆绑和固定装置一般要求.商业用车辆和车辆组合(半挂车除外).
【英文标准名称】: Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded
【原文标准名称】: 滚装船汽车捆绑和固定装置一般要求.商业用车辆和
BS 5131-1.7-1991 鞋靴和鞋靴材料试验方法.粘合剂.耐热性(蠕变)和耐剥离试验用热熔胶粘剂试验组件制备
【英文标准名称】: Methods of test for footwear and footwear materials - Adhesives - Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests
【原文标准名称】: 鞋靴和鞋靴材料试验方法.粘合剂.耐热性(蠕变)和耐剥离试验用热熔胶粘剂试验组件制备
BS 6200-3.1.2-1991 铁,钢和其他黑色金属抽样和分析.第3部分:分析方法.第1节:铝含量测定.第2小节:钢和铸铁:分光光度法
【英文标准名称】: Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel and cast iron: spectrophotometric method
【原文标准名称】: 铁,钢和其他黑色金属抽样和分析.第3部分:分析方法.第1节:铝含量测定.第2小节:钢和铸铁:分光
BS 6043-4.13-1991 制铝工业用碳素材料取样和试验方法.冷捣糊块.烘焙捣实糊块灰分测定
【英文标准名称】: Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste
【原文标准名称】: 制铝工业用碳素材料取样和试验方法.冷捣糊块.烘焙捣实糊块灰分测定
【标准号】:
BS EN ISO 6383-2-1991 塑料.薄膜和薄板.耐撕裂性测定.埃尔曼多(ELMENDORF)法
【英文标准名称】: Plastics - Film and sheeting - Determination of tear resistance - Elmendorf method
【原文标准名称】: 塑料.薄膜和薄板.耐撕裂性测定.埃尔曼多(ELMENDORF)法
【标准号】: BS EN ISO 6383-2-1991
【标准状态】: 现行
BS EN 20535-1991 纸和纸板.水吸收性测定.Cobb法
【英文标准名称】: Paper and board - Determination of water absorptiveness - Cobb method
【原文标准名称】: 纸和纸板.水吸收性测定.Cobb法
【标准号】: BS EN 20535-1991
【标准状态】: 现行
【国别】: 英国
BS ISO/IEC 9541-1-1991+A4-2009 信息技术.字型信息交换.体系结构
【英文标准名称】: Information technology - Font information interchange - Architecture
【原文标准名称】: 信息技术.字型信息交换.体系结构
【标准号】: BS ISO/IEC 9541-1-1991+A4-2009
【标准状态】: 现行
【国别】: 英国
BS 7537-2-1991 广播磁带录像机操作调整和测量技术.第2部分:专用机械测量和校准指南
【英文标准名称】: Measurement techniques and operational adjustments of broadcast VTRs - Guide to special mechanical measurements and alignments
【原文标准名称】: 广播磁带录像机操作调整和测量技术.第2部分:专用机械测量和校准指南
【标准号】: BS 7537-2-1991
BS 7378-2-1991 使用2号数字存取信号传输系统(DASS 2)经2048 kbit/s CCITT推荐标准G.703接口连接公共电信系统的装置.第2部分:自动重复呼叫设备规格
【英文标准名称】: Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - Specification for automatic-repeat call attempt facilities
BS EN 60920-1991 管形荧光灯镇流器.一般安全要求
【英文标准名称】: Specification for ballasts for tubular fluorescent lamps. General and safety requirements
【原文标准名称】: 管形荧光灯镇流器.一般安全要求
【标准号】: BS EN 60920-1991
【标准状态】: 作废
【国别】:
BS 6263-2-1991 地板表面的保护与维修.第2部分:弹性地板和花砖地板实施规程
【英文标准名称】: Care and maintenance of floor surfaces - Code of practice for resilient sheet and tile flooring
【原文标准名称】: 地板表面的保护与维修.第2部分:弹性地板和花砖地板实施规程
【标准号】: BS 6263-2-1991
【标准状态】: 现行
BS 4269-2-1991 牙科弹性印模材料.第2部分:藻酸盐印模材料规范
【英文标准名称】: Dental elastic impression material - Specification for alginate impression material
【原文标准名称】: 牙科弹性印模材料.第2部分:藻酸盐印模材料规范
【标准号】: BS 4269-2-1991
【标准状态】: 现行
【国别】:
BS EN 2791-1991 啮合量为1.5螺纹直径的单叉螺纹柄可调节的连杆端头.尺寸和负荷
【英文标准名称】: Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
【原文标准名称】: 啮合量为1.5螺纹直径的单叉螺纹柄可调节的连杆端头.尺寸和负荷
【标准号】: BS EN 2791-1991
【标准状态
BS 4778-2-1991 质量术语.第2部分:质量概念和相关定义
【英文标准名称】: Quality vocabulary - Quality concepts and related definitions
【原文标准名称】: 质量术语.第2部分:质量概念和相关定义
【标准号】: BS 4778-2-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】
BS EN 60068-3-3-1991 环境试验.指南.环境监测.杂项.设备抗震试验方法指南
【英文标准名称】: Environmental testing - Guidance - Environmental testing - Miscellaneous - Guide to seismic test methods for equipment
【原文标准名称】: 环境试验.指南.环境监测.杂项.设备抗震试验方法指南
【标准号】: BS EN 60068-3-3-1991
BS 7388-1991 液压动力系统防泄漏指南
【英文标准名称】: Guide for prevention of leaks from hydraulic fluid power systems
【原文标准名称】: 液压动力系统防泄漏指南
【标准号】: BS 7388-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1