资料描述
【英文标准名称】: Specification for unified machine screws and machine screw nuts
【原文标准名称】: 统一机用螺钉与机用螺母规范
【标准号】: BS 1981-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1991-08-30
【实施或试行日期】: 1991-08-30
【发布单位】: 英国标准学会(GB-BSI)
【起草单位】: BSI
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 方头紧固件;统一螺纹;铝合金;盘头紧固件;紧固件;尺寸公差;凸圆头紧固件;抗拉强度;半径;平头紧固件;凹槽头紧固件;尺寸;长度;六角头紧固件;槽头紧固件;黄铜;直径;螺母;螺纹紧固件;钢;半沉头紧固件;埋头紧固件;ISO米制螺纹;螺钉
【英文主题词】: Aluminium alloys;Brass;Cheese-head fasteners;Countersunk fasteners;Diameter;Dimensional tolerances;Dimensions;Fasteners;Hexagonal-head fasteners;ISO metric threads;Length;Nuts;Pan-head fasteners;Radius;Raised-head fasteners;Recessed-head fasteners;Screws (bolts);Slotted-head fasteners;Square-head fasteners;Steels;Tensile strength;Threaded fasteners;Unified screw threads
【摘要】: Applicable to machine screws and machine screw nuts having ISO inch screw threads and hexagon head and slotted or recessed heads with type Z and type V recess. Mechanical properties are specified for steel, brass and aluminium alloy screws and nuts.
【中国标准分类号】: J13
【国际标准分类号】: 21_060_10;21_060_20
【页数】: 48P.;A4
【正文语种】: 英语
BS 7496-3-1991 十字槽自攻螺钉.第3部分:半沉头螺钉规范
【英文标准名称】: Cross-recessed tapping screws - Specification for raised countersunk head screws
【原文标准名称】: 十字槽自攻螺钉.第3部分:半沉头螺钉规范
【标准号】: BS 7496-3-1991
【标准状态】: 现行
【国别】: 英国
BS 7461-1991 装有流量调节器、闭路开关检验、闭合位置指示开关或气流量控制器电动式气体自动关闭阀规范
【英文标准名称】: Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control
【原文标准名称】: 装有流量调节器、闭路开关检验、闭合位置指示开关或
BS 1936-2-1991 螺纹牙底削平和收尾规范.ISO公制螺纹规范
【英文标准名称】: Undercuts and runouts for screw threads. Specification for ISO metric screw threads
【原文标准名称】: 螺纹牙底削平和收尾规范.ISO公制螺纹规范
【标准号】: BS 1936-2-1991
【标准状态】: 现行
【国别】: 英国
BS EN 2790-1991 带自润滑班轮和螺纹摸柄衔接的自动校准滑动轴承可调节杆端:1.5线程.尺寸规格和负载
【英文标准名称】: Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
【原文标准名称】: 带自润滑班轮和螺纹摸柄衔接的自动校准滑动轴承可调节杆端:1.5线程.尺寸规格和负载
【标准号
BS 7419-1991 压紧螺栓规范
【英文标准名称】: Specification for holding down bolts
【原文标准名称】: 压紧螺栓规范
【标准号】: BS 7419-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1991-03-29
【实施或试行日期】: 199
BS EN 2569-1991 控制钢索配件和转动套筒.技术规范
【英文标准名称】: Control cable fittings and turnbarrels - Technical specification
【原文标准名称】: 控制钢索配件和转动套筒.技术规范
【标准号】: BS EN 2569-1991
【标准状态】: 现行
【国别】: 英国
【发布日期
BS 6161-18-1991 铝及铝合金阳极氧化镀层试验方法.第18部分:表面耐磨性测定
【英文标准名称】: Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance
【原文标准名称】: 铝及铝合金阳极氧化镀层试验方法.第18部分:表面耐磨性测定
【标准号】: BS 6161-18-1991
BS 5597-1991 容量可达1000ml一次使用的塑料气溶胶分配器规范
【英文标准名称】: Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
【原文标准名称】: 容量可达1000ml一次使用的塑料气溶胶分配器规范
【标准号】: BS 5597-1991
【标准状态】: 现行
【国别】:
BS 7417-1991 平面'O'形密封液压耦合器界面尺寸规范
【英文标准名称】: Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
【原文标准名称】: 平面'O'形密封液压耦合器界面尺寸规范
【标准号】: BS 7417-1991
【标准状态】: 现行
【国别】: 英国
BS 4778-3.2-1991 质量词汇.可用性、可靠性和可维修性术语.国际术语汇编3.2
【英文标准名称】: Quality vocabulary - Availability, reliability and maintainability terms - Glossary of international terms - 3.2 glossay of international terms
【原文标准名称】: 质量词汇.可用性、可靠性和可维修性术语.国际术语汇编3.2
【标准号】: BS 4778-
BS 6812-3-1991 土方机械发出的空气中噪声.动态试验条件下外部噪声的测量方法
【英文标准名称】: Airborne noise emitted by earth-moving machinery - Method of measurement of exterior noise in dynamic test conditions
【原文标准名称】: 土方机械发出的空气中噪声.动态试验条件下外部噪声的测量方法
【标准号】: BS 6812-3-1991
【标
BS 5131-1.2-1991 鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第2节:粘合缝耐剥离试验
【英文标准名称】: Methods of test for footwear and footwear materials - Adhesives - Resistance of adhesive joints to peeling
【原文标准名称】: 鞋靴和鞋靴材料试验方法.第1部分:粘合剂.第2节:粘合缝耐剥离试验
【标准号】: BS 5131-1.2-1991
【标准状态】:
BS 5131-3.1-1991 鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第1节:垂直于针脚孔的鞋衬鞋帮材料强度
【英文标准名称】: Methods of test for footwear and footwear materials - Uppers, textiles and threads - Strength of upper materials and lining materials at right angles to stitch perforations
【原文标准名称】: 鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第1节:垂直于针脚孔的
BS 5131-3.6-1991 鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第6节:鞋带耐磨性
【英文标准名称】: Methods of test for footwear and footwear materials - Uppers, textiles and threads - Abrasion resistance of shoe laces
【原文标准名称】: 鞋靴和鞋靴材料试验方法.第3部分:鞋帮、织物和缝线.第6节:鞋带耐磨性
【标准号】: BS 5131-3.6-1991
BS 3870-1-1991 针脚和缝.针脚类型分类和术语
【英文标准名称】: Stitches and seams. Classification and terminology of stitch types
【原文标准名称】: 针脚和缝.针脚类型分类和术语
【标准号】: BS 3870-1-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】
BS 3521-2-1991 眼镜镜片和镜架术语.镜架术语
【英文标准名称】: Terms relating to ophthalmic lenses and spectacle frames - Glossary of terms relating to spectacle frames
【原文标准名称】: 眼镜镜片和镜架术语.镜架术语
【标准号】: BS 3521-2-1991
【标准状态】: 现行
BS 1660-11-1991 机用锥销.第11部分:量规规范
【英文标准名称】: Machine tapers - Specification for gauges
【原文标准名称】: 机用锥销.第11部分:量规规范
【标准号】: BS 1660-11-1991
【标准状态】: 现行
【国别】: 英国
【发布日期】: 1991-03-29
BS 7416-1991 液压动力系统用精密无缝冷拔低碳钢管规范
【英文标准名称】: Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
【原文标准名称】: 液压动力系统用精密无缝冷拔低碳钢管规范
【标准号】: BS 7416-1991
【标准状态】:
BS 3908-9-1991 铅和铅合金取样和分析方法.第9部分:硫含量测定
【英文标准名称】: Methods for the sampling and analysis of lead and lead alloys - Sulphur in lead and lead alloys
【原文标准名称】: 铅和铅合金取样和分析方法.第9部分:硫含量测定
【标准号】: BS 3908-9-1991
【标准状态】: 现行
BS EN 10036-1991 黑色金属材料的化学分析.钢铁中碳总含量的测定.在氧气流中燃烧后的重力测定法
【英文标准名称】: Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
【原文标准名称】: 黑色金属材料的化学分析.钢铁中碳总含量的测定.在氧气流中燃烧后的重力测定法
【标准号