资料描述
【英文标准名称】: Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines (ISO 10816-1:1995)
【原文标准名称】: 机械振动.测量非旋转部件评定机械振动.第1部分:通用指南
【标准号】: DIN ISO 10816-1-1997
【标准状态】: 现行
【国别】: 德国
【发布日期】: 1997-08
【实施或试行日期】:
【发布单位】: 德国标准化学会(DIN)
【起草单位】:
【标准类型】: ()
【标准水平】: ()
【中文主题词】: 测量;非旋转;定义;机械试验;一般条件;振动测量;估计;振动;振动试验;验收试验;旋转部件;振动工程;机械工程;试验;测量技术;机器;评定;振动强度
【英文主题词】:
【摘要】: This document describes general conditions and procedures for the measurement and evaluation of vitration on non-rotating and, where applicable, non-reciprocating parts of complete machines. The general evaluation criteria, which are presented in terms of both vibration magnitude and change of vibration, relate to both operational monitoring and acceptance testing. Recommendations for measurements and evaluation criteria pertaining to specific machine types are provided in additional parts of this standard.
【中国标准分类号】: Z32
【国际标准分类号】: 17_160
【页数】: 15P;A4
【正文语种】: 德语
DIN 4000-143-2011 特征表.第143部分:带孔和柄的插齿刀
【英文标准名称】: Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank
【原文标准名称】: 特征表.第143部分:带孔和柄的插齿刀
【标准号】: DIN 4000-143-2011
【标准状态】: 现行
【国别】: 德国
DIN 212-3-2011 带直柄的机用铰刀.第3部分:NC-铰刀,尺寸规格
【英文标准名称】: Maschine reamers with parallel shanks - Part 3: NC-Reamers, dimensions
【原文标准名称】: 带直柄的机用铰刀.第3部分:NC-铰刀,尺寸规格
【标准号】: DIN 212-3-2011
【标准状态】: 现行
【国别】: 德国
DIN 212-2-2011 带直柄的机用铰刀.第2部分:阶形刀柄
【英文标准名称】: Machine reamers with parallel shanks - Part 2: Stepped shanks
【原文标准名称】: 带直柄的机用铰刀.第2部分:阶形刀柄
【标准号】: DIN 212-2-2011
【标准状态】: 现行
【国别】: 德国
【发布日期】:
DIN 21626-2011 矿山潜在爆炸环境用(电动/气动)混合驱动装置的风扇
【英文标准名称】: Fans with hybrid (electric/pneumatic) motor drive intended for use in potentially explosive atmospheres in coal mines
【原文标准名称】: 矿山潜在爆炸环境用(电动/气动)混合驱动装置的风扇
【标准号】: DIN 21626-2011
【标准状态】
DIN 55670-2011 油漆和清漆.用高电压对油漆涂层和类似涂层进行气孔和裂纹试验方法
【英文标准名称】: Paints and varnishes - Method for testing paint coatings for pores and cracks using high-voltage
【原文标准名称】: 油漆和清漆.用高电压对油漆涂层和类似涂层进行气孔和裂纹试验方法
【标准号】: DIN 55670-2011
【标准状态】: 现行
DIN 15551-3-2011 辐射敏感胶卷.硝酸纤维胶卷.第3部分:术语和定义,特性,用途,贮存
【英文标准名称】: Radiation sensitive films - Cellulose nitrate film - Part 3: Terms and definitions, properties, utilization, storage
【原文标准名称】: 辐射敏感胶卷.硝酸纤维胶卷.第3部分:术语和定义,特性,用途,贮存
【标准号】: DIN 15551-3-2011
DIN 51790-4-2011 液体燃料试验.钒和镍含量的测定.第4部分:焚化后用原子吸收光谱法(AAS)或者带有电感耦合等离子的光发射光谱分析法(ICP OES)测定
【英文标准名称】: Testing of liquid fuels - Determination of the vanadium and nickel content - Part 4: Determination by atomic absorption spectrometry (AAS) or by optical emission spectral analysis with inductively coupled plasma (ICP OES) after incineration<
DIN CEN/TR 15990-2011 数据表.鞋类试验材料和试验粘合剂.德文版本CEN/TR 15990-2010 + AC-2010
【英文标准名称】: Data Sheets - Footwear Tests Materials and Test Adhesives; German version CEN/TR 15990:2010 + AC:2010
【原文标准名称】: 数据表.鞋类试验材料和试验粘合剂.德文版本CEN/TR 15990-2010 + AC-2010
【标准号】: DIN CEN/TR 15990-2011
DIN 6730-2011 纸和纸板.词汇
【英文标准名称】: Paper and board - Vocabulary
【原文标准名称】: 纸和纸板.词汇
【标准号】: DIN 6730-2011
【标准状态】: 现行
【国别】: 德国
【发布日期】: 2011-02
【实施或试行日期】:
【发布单位】
DIN ISO/TS 80004-3-2011 纳米技术.词汇表.第3部分:炭质纳米颗粒(ISO/TS 80004-3-2010)
【英文标准名称】: Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)
【原文标准名称】: 纳米技术.词汇表.第3部分:炭质纳米颗粒(ISO/TS 80004-3-2010)
【标准号】: DIN ISO/TS 80004-3-2011
【标准状态】: 现行
DIN EN ISO 10301-1997 水质.易挥发卤化烃含量测定.气相色谱法
【英文标准名称】: Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997); German version EN ISO 10301:1997
【原文标准名称】: 水质.易挥发卤化烃含量测定.气相色谱法
【标准号】: DIN EN
DIN 38406-26-1997 德国对水,废水和淤泥的标准检验方法.阳离子(E组).第26部分:石墨管式炉原子吸收光谱法(AAS)测定铊
【英文标准名称】: German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
【原文标准名称】:
DIN EN 1671-1997 建筑物外压力排污系统
【英文标准名称】: Pressure sewerage systems outside buildings; German version EN 1671:1997
【原文标准名称】: 建筑物外压力排污系统
【标准号】: DIN EN 1671-1997
【标准状态】: 现行
【国别】: 德国
【发
DIN EN ISO 3822-4-1997 声学.实验室检测供水站装置和设备噪音特性.第4部分:特殊管件连接和操作条件
【英文标准名称】: Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997
DIN EN ISO 11689-1997 声学.机器和设备躁音数值比对程序
【英文标准名称】: Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); German version EN ISO 11689:1996
【原文标准名称】: 声学.机器和设备躁音数值比对程序
【标准号】: DIN EN ISO 11689-1997<
DIN ISO 11268-1-1997 土质.污染物对蚯蚓(恶臭蚯蚓)的影响.第1部分:人造土壤酶作用物测定急性毒力
【英文标准名称】: Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 1: Determination of acute toxicity using artificial soil substrate (ISO/DIS 11268-1:1993)
【原文标准名称】: 土质.污染物对蚯蚓(恶臭蚯蚓)的影响.第1部分:人造土壤酶作用物测定急性毒力
DIN ISO 10844-1997 声学.测量由车辆发出的噪音用试验车道的规范
【英文标准名称】: Acoustics - Specifications of test tracks for the purpose of measuring noise emitted by road vehicles (ISO 10844:1994)
【原文标准名称】: 声学.测量由车辆发出的噪音用试验车道的规范
【标准号】: DIN ISO 10844-1997
【标准状态
DIN V 45688-5-1997 噪声和振动方面的试验站和咨询中心的认定和操作准则.第5部分:机械制造,仪器仪表和建筑业中的振动
【英文标准名称】: Criteria for accreditation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 5: Vibration in mechanical engineering, equipment and construction
【原文标准名称】: 噪声和振动方面的试验
DIN V 45688-6-1997 噪声和振动试验站和咨询中心的认证和运作准则.第6部分:工作场所的振动
【英文标准名称】: Criteria for accreditation and operation of testing laboratories and consulting companies in the field of sound and vibration - Part 6: Vibration at the workplace
【原文标准名称】: 噪声和振动试验站和咨询中心的认证和运作准则.第6部分:工作场所的振动
DIN ISO 13536-1997 土质.PH值为8.1时利用氯化钡缓冲溶液测定可交换阳离子和潜在阳离子交换能力
【英文标准名称】: Soil quality - Determination of thepotential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 (ISO 13536:1995)
【原文标准名称】: 土质.PH值为8.1时利用氯化钡缓冲溶液测定可交换阳离子和潜在阳离子交换能力
DIN EN 840-2-1997 移动式废物箱.第2部分:4轮带耳轴形和/或梳齿形提升装置容积为500至1200立升的废物箱.尺寸和设计
【英文标准名称】: Mobile waste containers - Part 2: Containers with 4 wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-2:1997
【原文标准名称】: 移动
DIN EN 840-5-1997 移动式废料收集箱.第5部分:性能要求和检验方法
【英文标准名称】: Mobile waste containers - Part 5: Performance requirements and test methods; German version EN 840-5:1997
【原文标准名称】: 移动式废料收集箱.第5部分:性能要求和检验方法
【标准号】: DIN EN 840-5-1997
【标准状态】: 作废
DIN EN 1948-1-1997 固定源排放.PCDDs/PCDFs质量浓度测定.第1部分:取样
【英文标准名称】: Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 1: Sampling; German version EN 1948-1:1996
【原文标准名称】: 固定源排放.PCDDs/PCDFs质量浓度测定.第1部分:取样
【标准号】: DIN EN 1948-1-1
DIN EN 1948-2-1997 固定源排放.PCDDs/PCDFs质量浓度测定.第2部分:萃取和净化
【英文标准名称】: Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up; German version EN 1948-2:1996
【原文标准名称】: 固定源排放.PCDDs/PCDFs质量浓度测定.第2部分:萃取和净化
【标准号】:
DIN EN 1948-3-1997 固定源排放.PCDD/PCDF质量浓度测定.第3部分:标识和定量
【英文标准名称】: Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification; German version EN 1948-3:1996
【原文标准名称】: 固定源排放.PCDD/PCDF质量浓度测定.第3部分:标识和定量
DIN EN ISO 11820-1997 声学.现场消声器测量
【英文标准名称】: Acoustics - Measurements on silencers in situ (ISO 11820:1996); German version EN ISO 11820:1996
【原文标准名称】: 声学.现场消声器测量
【标准号】: DIN EN ISO 11820-1997
【标准状态】: 现行
【国别
DIN EN 840-1-1997 移动式废物箱.第1部分:两轮带梳齿形提升装置容积为80至390立升的废物箱.尺寸和设计
【英文标准名称】: Mobile waste containers - Part 1: Containers with 2 wheels with a capacity from 80 l to 390 l for comb lifting devices, dimensions and design; German version EN 840-1:1997
【原文标准名称】: 移动式废物箱.第1部分:两轮带梳齿形提升装置容积为80至390立升的废物箱.
DIN EN ISO 6468-1997 水质.有机氯杀虫剂、多氯联苯和氯苯测定.液-液萃取后气相色谱法
【英文标准名称】: Water quality - Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes - Gas-chromatographic method after liquid-liquid extraction (ISO 6468:1996); German version EN ISO 6468:1996
DIN EN ISO 11690-2-1997 声学.机器工作场所低噪音设计推荐惯例.第2部分:降低噪音措施
【英文标准名称】: Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996); German version EN ISO 11690-2:1996
【原文标准名称】: 声学.机器工作场所低噪音设计推荐惯例.第2部分:降低噪音措
DIN EN 840-3-1997 移动式废物箱.第3部分:4轮带耳轴形或/和梳齿形提升装置和移动盖板容积为700至1300立升的废物箱.尺寸和设计
【英文标准名称】: Mobile waste containers - Part 3: Containers with 4 wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-3:1997
【原文标准名称】: 移动