北京市东城区幸福北里甲17号1-229 Tel: 010-67123753 E-mail: kefu@infoeach.com
ICP备案证书号:京ICP备14017250号-1
MIL-HDBK-1763, MILITARY HANDBOOK, AIRCRAFT/STORES COMPATIBILITY: SYSTEMS ENGINEERING DATA REQUIREMENTS AND TEST PROCEDURES (15 JUN 1998) [SUPERSEDING MIL-STD-1763A]., This handbook applies to all agencies within the DoD and industry involved with determining the extent of compatibility between military aircraft and aircraft stores. It applies to every activity of the system life cycle involving aircraft and/or stores including: development, manufacturing, deployment, operations, support, training and disposal. This handbook provides uniform guidance requirements for establishing the extent of compatibility between an aircraft, specific stores, and suspension equipment and guidance to justify the airworthiness of stores for use on an aircraft. This handbook defines all the engineering data package requirements and provides standard test methodology, test instrumentation and data to be obtained from each test to establish the extent of aircraft/stores compatibility. By this standardization, responsible agencies may then be assured that a test run by any agency to this handbook will provide the same data they would require, thereby facilitating the transfer of data between agencies and eliminating the unnecessary duplication of tests. Figure 1 provides an outline for the certification process and figure 2 provides a generic timeline for the activities that are expected to take place during a certification project.
MIL-HDBK-1760
MIL-HDBK-1760, MILITARY HANDBOOK AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM. This Handbook was developed by a team including members from the three US military services, the UK MOD, the SAE AS-1B committee, and contractors. It includes informatio
MIL-HDBK-1670
MIL-HDBK-1670, DEPARTMENT OF DEFENSE HANDBOOK: ENVIRONMENTAL CRITERIA AND GUIDELINES FOR AIR-LAUNCHED WEAPONS (07 DEC 2007) [SUPERSEDES MIL-STD-1670A]., This handbook establishes guidelines for the development of environmental engineering design and te
MIL-HDBK-1655
MIL-HDBK-1655, DEPARTMENT OF DEFENSE HANDBOOK: CLASSIFICATION OF DEFECTS OF FLARELESS AND BEAM SEAL FITTINGS (17 MAR 1997) [SUPERSEDES MIL-STD-1655]., This handbook establishes a classification of commonly occurring defects applicable to flareless fitt
MIL-HDBK-1599A
MIL-HDBK-1599A, DEPARTMENT OF DEFENSE HANDBOOK: BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS (2 OCT 1997) (SUPERSEDING MIL-STD-1599]., . This handbook is
MIL-HDBK-1587
MIL-HDBK-1587, DEPARTMENT OF DEFENSE HANDBOOK MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEMS (18 JUL 1996). This standard establishes the requirements for materials and processes used during design and production of aerospace weapon sy
MIL-HDBK-1568
MIL-HDBK-1568 (USAF), MILITARY HANDBOOK MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS (18 JUL 1996). This standard establishes the requirements for materials, processes and techniques, and identifies the task
MIL-HDBK-1559
MIL-HDBK-1559, DEPARTMENT OF DEFENSE HANDBOOK: NUMBERS, SERIAL, AIRCRAFT GAS TURBINE ENGINE AND ENGINE MODULE ASSIGNMENT OF (14 FEB 1997) [SUPERSEDING MIL-STD-1559]. This standard describes the method of assignment and arrangement of letters and numera
MIL-HDBK-1553A
MIL-HDBK-1553A, MILITARY HANDBOOK MULTIPLEX APPLICATIONS HANDBOOK (1 NOV 1998)., This document provides rationale and guidance on the use of requirements contained in MIL-STD-1553B, Aircraft Internal Time Division Command/Response Multiplex Data Bus. N
MIL-HDBK-1547A
MIL-HDBK-1547A, DEPARTMENT OF DEFENSE HANDBOOK: ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES (06 JUL 1998) [SUPERSEDING MIL-STD-1547]., This Handbook was developed to aid Designers and Parts, Materials, and Processes (PMP) s
MIL-HDBK-1547
MIL-HDBK-1547, DEPARTMENT OF DEFENSE HANDBOOK: ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES (09 NOV 1997) [SUPERSEDING MIL-STD-1547]., This Handbook was developed to aid Designers and Parts, Materials, and Processes (PMP) sp
MIL-HDBK-1530B
MIL-HDBK-1530B, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (3 JUL 2002)., This handbook contains general guidelines for the U.S. Air Force Aircraft Structural Integrity Program (ASIP). These guidelines
MIL-HDBK-1530A
MIL-HDBK-1530A, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (24 JAN 2002)., This handbook contains general guidelines for the U.S. Air Force Aircraft Structural Integrity Program (ASIP). These guideline
MIL-HDBK-1530
MIL-HDBK-1530, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (31 OCT 1996) [SUPERSEDING MIL-STD-1530A]., The purpose of this standard is to describe the Air Force Aircraft Structural Integrity Program, de
MIL-HDBK-1516
MIL-HDBK-1516, MILITARY HANDBOOK: UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIEL (24 JAN 1996)., This handbook establishes a uniform code and to serve as a general guide to the selection of suitable materials, procedures, and systems for clean
MIL-HDBK-1512
MIL-HDBK-1512 (USAF), DOD HANDBOOK ELECTRO-EXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHOD (30 SEP 1997)., This standard establishes the requirements and test methods for the design and development of electro-explosive
MIL-HDBK-1473
MIL-HDBK-1473 (MI), DEPARTMENT OF DEFENSE HANDBOOK COLOR AND MARKING OF ARMY MATERIEL (11 DEC 1995) [SUPERSEDING MIL-STD-1473B]. This standard prescribes only general color and marking requirements-not finishes, surface preparations, related treatments
MIL-HDBK-1467
MIL-HDBK-1467, DOD HDBK, ACQUISITION OF SOFTWARE ENVIRONMENTS AND SUPPORT SOFTWARE (10 DEC 1997). This handbook establishes guidelines for the acquisition of new common operating environment (COE) items and ensuring the compatibility of these items wit
MIL-HDBK-1461A
MIL-HDBK-1461A, DEPARTMENT OF DEFENSE HANDBOOK: AMMUNITION MANUFACTURERS AND THEIR SYMBOLS (1 APR 1999). This handbook establishes and describes the manufacturer's identification symbol used in the lot numbers for all DOD contracted manufacture, renova
MIL-HDBK-1461
MIL-HDBK-1461, DEPARTMENT OF DEFENSE HANDBOOK: AMMUNITION MANUFACTURERS AND THEIR SYMBOLS (15 JAN 1998)., This standard establishes and describes the manufacturer's identification, symbol used int eh lot numbers for all DOD contracted manufacture, reno
MIL-HDBK-1455
MIL-HDBK-1455, MILITARY HANDBOOK: DISPENSER AND SUB-MUNITION, AIR DELIVERED, SAFETY DESIGN AND SAFETY QUALIFICATION CRITERIA FOR (14 FEB 1997) (SUPERSEDES MIL-STD-1455A)., This specification establishes basic safety design and safety qualification crit