北京市东城区幸福北里甲17号1-229 Tel: 010-67123753 E-mail: kefu@infoeach.com
ICP备案证书号:京ICP备14017250号-1
MIL-HDBK-1760, MILITARY HANDBOOK AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM. This Handbook was developed by a team including members from the three US military services, the UK MOD, the SAE AS-1B committee, and contractors. It includes information previously published in document ASD-TR-87-5028 with certain elements of ASD-TR-91-5009. Some of this information was also published in DEF-STAN-00-69 (Part II), which is written around MIL-STD-1760B. This version of this Handbook is written around MIL-STD-1760C and assumes that the reader is also reading 1760C. 2. This Handbook provides information on the implementation of a standardized electrical interconnection system, as defined by MIL-STD-1760, into both current and future aircraft and stores. It provides guidance on design considerations and options for including the standard interface capability at the aircraft's store stations and for providing a common electrical interface on carriage stores and mission stores. As a handbook, it cannot be invoked as a requirement in a contract. 3. Trends in weapon system designs (aircraft and stores) caused concern over the general proliferation of aircraft-to-store electrical interfacing requirements and the resulting high cost to achieve interoperability between aircraft and stores. The intent of MIL-STD-1760 is to reduce the aircraft/store electrical integration problem by specifying a standard electrical interface between aircraft and stores. The standard electrical interface is based on recognized trends in store management systems which use serial digital data transmission for control, monitor and release of stores.
MIL-HDBK-113C
MIL-HDBK-113C, MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (24 APR 1989)., This handbook establishes design guides for selection of suitable lubricant
MIL-HDBK-113C
MIL-HDBK-113C (NOTICE 1), MILITARY HANDBOOK, GUIDE FOR SELECTION OF LUBRICANTS, FUNCTIONAL FLUIDS, PRESERVATIVES AND SPECIALTY PRODUCTS FOR USE IN GROUND EQUIPMENT SYSTEMS (12 APR 2004)., MIL-HDBK-113C, dated 24 April 1989, has been reviewed and determ
MIL-HDBK-112
MIL-HDBK-112, MILITARY HANDBOOK: PUMPS, SELECTION AND APPLICATION (18 JAN 1978)., MIL-HDBK-112, dated 23 December 1964, is hereby canceled without replacement.
MIL-HDBK-110
MIL-HDBK-110 (NOTICE-1), MILITARY HANDBOOK, CHAINS, POWER TRANSMISSION AND CONVEYING, APPLICATION, INSTALLATION, AND MAINTENANCE (1 FEB 1982).
MIL-HDBK-109
MIL-HDBK-109 (H-109), QUALITY CONTROL AND RELIABILITY - STATISTICAL PROCEDURES FOR DETERMINING VALIDITY OF SUPPLIERS ATTRIBUTES INSPECTION OF. This purpose of this handbook is to provide appropriate statistical tests and tables of critical values to De
MIL-HDBK-108
This handbook (interim) was developed by the Bureau of Naval E=Weapons, Department of the Navy on behalf of the Office of the Assistant Secretary of Defense (Supply/Logistics). It was prepared to meet a growing need for the use of standard sampling pla
MIL-HDBK-107
MIL-HDBK-107 (NOTICE 1), INSPECTION QUALITY CONTROL SINGLE LEVEL CONTINUOUS SAMPLING PROCEDURES & TABLES FOR INSPECTION BY ATTRIBUTES (11 FEB 1983) [S/S BY MIL-STD-1235]., MIL-HDBK-107, dated 30 April 1959, is hereby canceled. MIL-STD-1235 provides
MIL-HDBK-103AD
MIL-HDBK-103AD, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (26 MAR 2009)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-HDBK-103AB
MIL-HDBK-103AB, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 MAR 2008)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-HDBK-103AA
MIL-HDBK-103AA, DEPARTMENT OF DEFENSE HANDBOOK: LIST OF STANDARD MICROCIRCUIT DRAWINGS (19 SEP 2007)., The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the DoD Parts Management Program (PMP). The PMP is implemented by
MIL-HDBK-1670
MIL-HDBK-1670, DEPARTMENT OF DEFENSE HANDBOOK: ENVIRONMENTAL CRITERIA AND GUIDELINES FOR AIR-LAUNCHED WEAPONS (07 DEC 2007) [SUPERSEDES MIL-STD-1670A]., This handbook establishes guidelines for the development of environmental engineering design and te
MIL-HDBK-1655
MIL-HDBK-1655, DEPARTMENT OF DEFENSE HANDBOOK: CLASSIFICATION OF DEFECTS OF FLARELESS AND BEAM SEAL FITTINGS (17 MAR 1997) [SUPERSEDES MIL-STD-1655]., This handbook establishes a classification of commonly occurring defects applicable to flareless fitt
MIL-HDBK-1599A
MIL-HDBK-1599A, DEPARTMENT OF DEFENSE HANDBOOK: BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL SYSTEMS AND SUBSYSTEMS (2 OCT 1997) (SUPERSEDING MIL-STD-1599]., . This handbook is
MIL-HDBK-1587
MIL-HDBK-1587, DEPARTMENT OF DEFENSE HANDBOOK MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEMS (18 JUL 1996). This standard establishes the requirements for materials and processes used during design and production of aerospace weapon sy
MIL-HDBK-1568
MIL-HDBK-1568 (USAF), MILITARY HANDBOOK MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS (18 JUL 1996). This standard establishes the requirements for materials, processes and techniques, and identifies the task
MIL-HDBK-1559
MIL-HDBK-1559, DEPARTMENT OF DEFENSE HANDBOOK: NUMBERS, SERIAL, AIRCRAFT GAS TURBINE ENGINE AND ENGINE MODULE ASSIGNMENT OF (14 FEB 1997) [SUPERSEDING MIL-STD-1559]. This standard describes the method of assignment and arrangement of letters and numera
MIL-HDBK-1553A
MIL-HDBK-1553A, MILITARY HANDBOOK MULTIPLEX APPLICATIONS HANDBOOK (1 NOV 1998)., This document provides rationale and guidance on the use of requirements contained in MIL-STD-1553B, Aircraft Internal Time Division Command/Response Multiplex Data Bus. N
MIL-HDBK-1547A
MIL-HDBK-1547A, DEPARTMENT OF DEFENSE HANDBOOK: ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES (06 JUL 1998) [SUPERSEDING MIL-STD-1547]., This Handbook was developed to aid Designers and Parts, Materials, and Processes (PMP) s
MIL-HDBK-1547
MIL-HDBK-1547, DEPARTMENT OF DEFENSE HANDBOOK: ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES (09 NOV 1997) [SUPERSEDING MIL-STD-1547]., This Handbook was developed to aid Designers and Parts, Materials, and Processes (PMP) sp
MIL-HDBK-1530B
MIL-HDBK-1530B, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (3 JUL 2002)., This handbook contains general guidelines for the U.S. Air Force Aircraft Structural Integrity Program (ASIP). These guidelines
MIL-HDBK-1530A
MIL-HDBK-1530A, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (24 JAN 2002)., This handbook contains general guidelines for the U.S. Air Force Aircraft Structural Integrity Program (ASIP). These guideline
MIL-HDBK-1530
MIL-HDBK-1530, DEPARTMENT OF DEFENSE HANDBOOK: AIRCRAFT STRUCTURAL INTEGRITY PROGRAM, GENERAL GUIDELINES FOR (31 OCT 1996) [SUPERSEDING MIL-STD-1530A]., The purpose of this standard is to describe the Air Force Aircraft Structural Integrity Program, de
MIL-HDBK-1516
MIL-HDBK-1516, MILITARY HANDBOOK: UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIEL (24 JAN 1996)., This handbook establishes a uniform code and to serve as a general guide to the selection of suitable materials, procedures, and systems for clean
MIL-HDBK-1512
MIL-HDBK-1512 (USAF), DOD HANDBOOK ELECTRO-EXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHOD (30 SEP 1997)., This standard establishes the requirements and test methods for the design and development of electro-explosive
MIL-HDBK-1473
MIL-HDBK-1473 (MI), DEPARTMENT OF DEFENSE HANDBOOK COLOR AND MARKING OF ARMY MATERIEL (11 DEC 1995) [SUPERSEDING MIL-STD-1473B]. This standard prescribes only general color and marking requirements-not finishes, surface preparations, related treatments
MIL-HDBK-1467
MIL-HDBK-1467, DOD HDBK, ACQUISITION OF SOFTWARE ENVIRONMENTS AND SUPPORT SOFTWARE (10 DEC 1997). This handbook establishes guidelines for the acquisition of new common operating environment (COE) items and ensuring the compatibility of these items wit
MIL-HDBK-1461A
MIL-HDBK-1461A, DEPARTMENT OF DEFENSE HANDBOOK: AMMUNITION MANUFACTURERS AND THEIR SYMBOLS (1 APR 1999). This handbook establishes and describes the manufacturer's identification symbol used in the lot numbers for all DOD contracted manufacture, renova
MIL-HDBK-1461
MIL-HDBK-1461, DEPARTMENT OF DEFENSE HANDBOOK: AMMUNITION MANUFACTURERS AND THEIR SYMBOLS (15 JAN 1998)., This standard establishes and describes the manufacturer's identification, symbol used int eh lot numbers for all DOD contracted manufacture, reno
MIL-HDBK-1455
MIL-HDBK-1455, MILITARY HANDBOOK: DISPENSER AND SUB-MUNITION, AIR DELIVERED, SAFETY DESIGN AND SAFETY QUALIFICATION CRITERIA FOR (14 FEB 1997) (SUPERSEDES MIL-STD-1455A)., This specification establishes basic safety design and safety qualification crit
MIL-HDBK-1407
MIL-HDBK-1407, DEPARTMENT OF DEFENSE HANDBOOK MILITARY HANDBOOK HEATERS, VEHICULAR COMPARTMENT; HEATERS, COOLANT, ENGINE; HEATERS, SPACE; HEATERS, DUCT-TYPE (30 JUN 1998)., This Military Standard is issued to implement Department of the Army policy spe