MIL-A-8806A (AMENDMENT 1), MILITARY SPECIFICATION: ACOUSTICAL NOISE LEVEL IN AIRCRAFT, GENERAL SPECIFICATION FOR (12 SEP 1967) [REFER TO MIL-STD-1789].
MIL-PRF-907E (AMENDMENT 2), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (10 MAY 1996) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by all Departments and Agenc
MIL-PRF-907E (AMENDMENT 1), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (13 JAN 1993) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by the Naval Sea Systems Com
MIL-PRF-6106L (AMENDMENT 5), PERFORMANCE SPECIFICATION, RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (29 JUL 2003) [SUPERSEDING MIL-R-6106J]., This amendment forms a part of MIL-PRF-6106L, dated 10 November 2000, and is approved for use by all Depart
MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for
MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION, COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of t
MIL-PRF-3572B (AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (30 SEP 2002) [SUPERSEDING MIL-L-3572A]., This amendment forms a part of MIL-PRF-3572B, dated 21 January 2000, and is approved for use by all departments and agen
MIL-PRF-3135G (AMENDMENT 4), PERFORMANCE SPECIFICATION, DECK COVERING UNDERLAY MATERIALS (14 NOV 1986)., This amendment forms a part of MIL-D-3135G, dated 21 March 1983, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-A-8806A, MILITARY SPECIFICATION: ACOUSTICAL NOISE LEVEL IN AIRCRAFT, GENERAL SPECIFICATION FOR (11 JUL 1966) [REFER TO MIL-STD-1789]., This specification covers the general requirements for the control of acoustical noise in occupied spaces of aircraf
MIL-A-87244A (NOTICE 1), AVIONICS/ELECTRONICS INTEGRITY PROGRAM REQUIREMENTS (AVIP) (30 JAN 1995) [S/S BY MIL-HDBK-87244]., MIL-A-87244a (USAF) is hereby cancelled. Future program should use MIL-HDBK-87244 (USAF), Avionics/Electronics Integrity.
MIL-A-87221 (NOTICE 1), MILITARY SPECIFICATION: AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR (8 JUN 1990) [S/S by AFGS-87221]. ML-A-87221, dated 28 February 1985, is hereby canceled. Future acquisitions should refer to AFGS-87221A.
MIL-A-87135 (USAF), MILITARY SPECIFICATION, ADHESIVES, NON-CONDUCTIVE, FOR ELECTRONICS APPLICATIONS (16 FEB 1979)., This specification establishes requirements for a moderately fast curing adhesive used for bonding components to printed-wiring assemblies
MIL-A-8625F (AMENDMENT 1), MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (15 SEP 2003)., This amendment forms a part of MIL-A-8625F, dated 10 September 1993, and is approvedfor use by all Departments and Agencies of the Departme
MIL-A-8625F, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (10 SEP 1993)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8625E (AMENDMENT 1), MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (13 NOV 1989).,This amendment forms a Dart of military specification MIL-A-8625E.dated 25 April 1988, and is approved far use by all Departments and Agenci
MIL-A-8625E, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (25 APR 1988)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8625D, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (30 JUN 1985)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8591H (NOTICE 1), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (12 DEC 2005) [S/S by MIL-STD-8591]., MIL-A-8591H(1), dated 30 June 1994, is hereby canceled.
MIL-A-8591H (AMENDMENT 1), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (30 JUN 1994) [S/S by MIL-STD-8591].
MIL-A-8591H, MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (23 MAR 1990) [S/S by MIL-STD-8591]., This specification sets forth general structural and mechanical de
MIL-A-8591G (AMENDMENT 5), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (14 AUG 1987) [S/S by MIL-STD-8591]., This amendment forms a part of Military Specificatio
MIL-A-8591G, MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (01 DEC 1983) [S/S by MIL-STD-8591]., This specification sets forth general structural and mechanical de
MIL-A-85802 (AS), MILITARY SPECIFICATION, ACTUATOR, ELECTROMECHANICAL, LINEAR (10 OCT 1986)., This specification establishes the requirements for themanufacture and inspection of one type of electromechanical linear actuator.The test limits in this specif
MIL-A-8576C, MILITARY SPECIFICATION: ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC (15 NOV 1997) [S/S by SAE-AMS-A-8576]., MIL-A-8576C, dated, is hereby canceled. Future acquisition for this sealing compound shouldrefer to Society Of Automotive Engineers (S
MIL-A-8576C, MILITARY SPECIFICATION: ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC (22 SEP 1984) [S/S by SAE-AMS-A-8576]., This specification covers acrylic-monomer base adhesives intended for use in bonding acrylic plastics.
MIL-A-85495, MILITARY SPECIFICATION: ANTIOXIDANT, T-BUTYLPHENOL TYPE, 2, 2,-METHYENEBIS (4-METHYL-6-T-BUTYLPHENOL) (06 OCT 1981)., This specification establishes the requirements for an antioxidant of the t-butylphenol type, 2, 2' - methylenebis (4-methyl
MIL-A-85072A, MILITARY SPECIFICATION, ACTUATOR, ELECTROMECHANICAL, LINEAR (1 MAY 1987)., This specification establishes the requirements for themanufacture and inspection of one type of electromechanical linear actuator.The test limits in this specificati
MIL-PRF-9854C (AMENDMENT 1)
MIL-PRF-9854C (AMENDMENT 1), PERFORMANCE SPECIFICATION TECHNICAL MANUALS: STRUCTURAL REPAIR (AIRCRAFT) (11 FEB 2002) [SUPERSEDING MIL-M-9854B].
MIL-PRF-907E (AMENDMENT 2)
MIL-PRF-907E (AMENDMENT 2), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (10 MAY 1996) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by all Departments and Agenc
MIL-PRF-907E (AMENDMENT 1)
MIL-PRF-907E (AMENDMENT 1), PERFORMANCE SPECIFICATION: ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE (13 JAN 1993) [SUPERSEDING MIL-A-907D]., This amendment forms a part of MIL-A-907E, dated 18 June 1985, and is approved for use by the Naval Sea Systems Com
MIL-PRF-6106L (AMENDMENT 5)
MIL-PRF-6106L (AMENDMENT 5), PERFORMANCE SPECIFICATION, RELAYS, ELECTROMAGNETIC GENERAL SPECIFICATION FOR (29 JUL 2003) [SUPERSEDING MIL-R-6106J]., This amendment forms a part of MIL-PRF-6106L, dated 10 November 2000, and is approved for use by all Depart
MIL-PRF-5606H (AMENDMENT 3)
MIL-PRF-5606H (AMENDMENT 3), PERFORMANCE SPECIFICATION HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE (7 SEP 2006)., This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for
MIL-PRF-4556F (AMENDMENT 1)
MIL-PRF-4556F (AMENDMENT 1), PERFORMANCE SPECIFICATION, COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS (16 FEB 1999)., This amendment forms a part of MIL-PRF-4556F, dated 15 December 1998, and is approved for use by all Departments and Agencies of t
MIL-PRF-3572B (AMENDMENT 1)
MIL-PRF-3572B (AMENDMENT 1), PERFORMANCE SPECIFICATION, LUBRICANT, COLLOIDAL GRAPHITE IN OIL (30 SEP 2002) [SUPERSEDING MIL-L-3572A]., This amendment forms a part of MIL-PRF-3572B, dated 21 January 2000, and is approved for use by all departments and agen
MIL-PRF-3135G (AMENDMENT 4)
MIL-PRF-3135G (AMENDMENT 4), PERFORMANCE SPECIFICATION, DECK COVERING UNDERLAY MATERIALS (14 NOV 1986)., This amendment forms a part of MIL-D-3135G, dated 21 March 1983, and is approved for use by all Departments and Agencies of the Department of Defense.
MIL-PRF-122A (AMENDMENT 4)
MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].
MIL-PRF-122A (AMENDMENT 4)
MIL-PRF-122A (AMENDMENT 4), PERFORMANCE SPECIFICATION, RESISTORS, FIXED, PRECISION, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24 APR 1995) [SUPERSEDING MIL-R-122] [S/S BY DSCC DWGS 97009, 97010 AND 97011].
MIL-A-8806A
MIL-A-8806A, MILITARY SPECIFICATION: ACOUSTICAL NOISE LEVEL IN AIRCRAFT, GENERAL SPECIFICATION FOR (11 JUL 1966) [REFER TO MIL-STD-1789]., This specification covers the general requirements for the control of acoustical noise in occupied spaces of aircraf
MIL-A-87244A (NOTICE 1)
MIL-A-87244A (NOTICE 1), AVIONICS/ELECTRONICS INTEGRITY PROGRAM REQUIREMENTS (AVIP) (30 JAN 1995) [S/S BY MIL-HDBK-87244]., MIL-A-87244a (USAF) is hereby cancelled. Future program should use MIL-HDBK-87244 (USAF), Avionics/Electronics Integrity.
MIL-A-87221 (NOTICE 1)
MIL-A-87221 (NOTICE 1), MILITARY SPECIFICATION: AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR (8 JUN 1990) [S/S by AFGS-87221]. ML-A-87221, dated 28 February 1985, is hereby canceled. Future acquisitions should refer to AFGS-87221A.
MIL-A-87135 (USAF)
MIL-A-87135 (USAF), MILITARY SPECIFICATION, ADHESIVES, NON-CONDUCTIVE, FOR ELECTRONICS APPLICATIONS (16 FEB 1979)., This specification establishes requirements for a moderately fast curing adhesive used for bonding components to printed-wiring assemblies
MIL-A-8625F (AMENDMENT 1)
MIL-A-8625F (AMENDMENT 1), MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (15 SEP 2003)., This amendment forms a part of MIL-A-8625F, dated 10 September 1993, and is approvedfor use by all Departments and Agencies of the Departme
MIL-A-8625F
MIL-A-8625F, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (10 SEP 1993)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8625E (AMENDMENT 1)
MIL-A-8625E (AMENDMENT 1), MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (13 NOV 1989).,This amendment forms a Dart of military specification MIL-A-8625E.dated 25 April 1988, and is approved far use by all Departments and Agenci
MIL-A-8625E
MIL-A-8625E, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (25 APR 1988)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8625D
MIL-A-8625D, MILITARY SPECIFICATION: ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS (30 JUN 1985)., This specification covers the requirements for six types andtwo classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for no
MIL-A-8591H (NOTICE 1)
MIL-A-8591H (NOTICE 1), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (12 DEC 2005) [S/S by MIL-STD-8591]., MIL-A-8591H(1), dated 30 June 1994, is hereby canceled.
MIL-A-8591H (AMENDMENT 1)
MIL-A-8591H (AMENDMENT 1), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (30 JUN 1994) [S/S by MIL-STD-8591].
MIL-A-8591H
MIL-A-8591H, MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (23 MAR 1990) [S/S by MIL-STD-8591]., This specification sets forth general structural and mechanical de
MIL-A-8591G (AMENDMENT 5)
MIL-A-8591G (AMENDMENT 5), MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (14 AUG 1987) [S/S by MIL-STD-8591]., This amendment forms a part of Military Specificatio
MIL-A-8591G
MIL-A-8591G, MILITARY SPECIFICATION: AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE), GENERAL DESIGN CRITERIA FOR (01 DEC 1983) [S/S by MIL-STD-8591]., This specification sets forth general structural and mechanical de
MIL-A-85802 (AS)
MIL-A-85802 (AS), MILITARY SPECIFICATION, ACTUATOR, ELECTROMECHANICAL, LINEAR (10 OCT 1986)., This specification establishes the requirements for themanufacture and inspection of one type of electromechanical linear actuator.The test limits in this specif
MIL-A-8576C
MIL-A-8576C, MILITARY SPECIFICATION: ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC (15 NOV 1997) [S/S by SAE-AMS-A-8576]., MIL-A-8576C, dated, is hereby canceled. Future acquisition for this sealing compound shouldrefer to Society Of Automotive Engineers (S
MIL-A-8576C
MIL-A-8576C, MILITARY SPECIFICATION: ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC (22 SEP 1984) [S/S by SAE-AMS-A-8576]., This specification covers acrylic-monomer base adhesives intended for use in bonding acrylic plastics.
MIL-A-85495 (AMENDMENT 1)
MIL-A-85495 (AMENDMENT 1), MILITARY SPECIFICATION: ANTIOXIDANT, T-BUTYLPHENOL TYPE, 2, 2,-METHYENEBIS (4-METHYL-6-T-BUTYLPHENOL) (30 JUN 1995).
MIL-A-85495
MIL-A-85495, MILITARY SPECIFICATION: ANTIOXIDANT, T-BUTYLPHENOL TYPE, 2, 2,-METHYENEBIS (4-METHYL-6-T-BUTYLPHENOL) (06 OCT 1981)., This specification establishes the requirements for an antioxidant of the t-butylphenol type, 2, 2' - methylenebis (4-methyl
MIL-A-85072A
MIL-A-85072A, MILITARY SPECIFICATION, ACTUATOR, ELECTROMECHANICAL, LINEAR (1 MAY 1987)., This specification establishes the requirements for themanufacture and inspection of one type of electromechanical linear actuator.The test limits in this specificati