资料描述
【英文标准名称】: Specification for Clinical XML DTDs in Healthcare
【原文标准名称】: 保健临床XML DTDs规范
【标准号】: ANSI/ASTM E2182-2002
【标准状态】: 作废
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
【发布单位】: 美国国家标准学会(US-ANSI)
【起草单位】: ANSI
【标准类型】: ()
【标准水平】: ()
【中文主题词】:
【英文主题词】: Clinical;Computer software;Extensible Markup Language;Health services;Materials testing;Personal health;Public health;Specification;Technology;XML
【摘要】: This specification defines an electronic representation that includes the varying information required for broad exchange in health care both today and in the future. eXtensible Markup Language (XML) is a convergence of data processing, communication, and publishing technology. XML is a platform, vendor, and application independent technology for describing document content and structure in tags or elements. The names of the tags and the rules for using them are contained in the Document Type Definition (DTD). The DTD describes the structure of the document and defines the names of tags it contains. Additionally the DTD declares the order in which the tags occur and how often the tags can appear; that is, the DTD defines the hierarchy of the tags. A DTD for a prescription might contain structural elements for the medication prescribed medication, the dosage dosage, the form form, the quantity quantity, and so forth. This specification is in the form of a set of standard XML DTDs that match the electronic document requirements in the health care industry. This specification refers to and makes use of recommendations from the World Wide Web consortium, the W3C (http://www.w3.org). This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use
【中国标准分类号】: C04
【国际标准分类号】: 35_240_80
【页数】:
【正文语种】: 英语
ANSI/ASTM D2321-2011 排污水和其它重力流动设备用热塑性塑料管的地下安装用实施规程
【英文标准名称】: Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
【原文标准名称】: 排污水和其它重力流动设备用热塑性塑料管的地下安装用实施规程
【标准号】: ANSI/ASTM D2321-2011
【标准状态】:
ANSI/ASTM E2148-2011 金属加工或金属切削液卫生与安全性相关文献的使用指南
【英文标准名称】: Guide For Using Documents Related To Metalworking Or Metal Removal Fluid Health And Safety
【原文标准名称】: 金属加工或金属切削液卫生与安全性相关文献的使用指南
【标准号】: ANSI/ASTM E2148-2011
【标准状态】: 现行
ANSI/ASTM E2523-2011 金属加工液和操作用术语
【英文标准名称】: TERMINOLOGY FOR METALWORKING FLUIDS AND OPERATIONS
【原文标准名称】: 金属加工液和操作用术语
【标准号】: ANSI/ASTM E2523-2011
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2011
ANSI/ASTM E2564-2011 用直接显微镜计数(DMC)法进行金属加工流体中分支杆菌计数的试验方法
【英文标准名称】: TEST METHOD FOR ENUMERATION OF MYCOBACTERIA IN METALWORKING FLUIDS BY DIRECT MICROSCOPIC COUNTING (DMC) METHOD
【原文标准名称】: 用直接显微镜计数(DMC)法进行金属加工流体中分支杆菌计数的试验方法
【标准号】: ANSI/ASTM E2564-2011
ANSI/ASTM D2513-2011 聚乙烯(PE)压力管,管道和配件用规格
【英文标准名称】: Specification for Polyethylene (PE) as Pressure Pipe, Tubing, and Fittings
【原文标准名称】: 聚乙烯(PE)压力管,管道和配件用规格
【标准号】: ANSI/ASTM D2513-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM D2729-2011 聚氯乙烯(PVC)污水管及管配件规格
【英文标准名称】: Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
【原文标准名称】: 聚氯乙烯(PVC)污水管及管配件规格
【标准号】: ANSI/ASTM D2729-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM D5685-2011 玻璃纤维规格.玻璃纤维加固的热硬性树脂加压管配件
【英文标准名称】: Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
【原文标准名称】: 玻璃纤维规格.玻璃纤维加固的热硬性树脂加压管配件
【标准号】: ANSI/ASTM D5685-2011
【标准状态】: 现行
ANSI/ASTM F2619-2011 高密度聚乙烯(PE)线管规格
【英文标准名称】: Specification for High-Density Polyethylene (PE) Line Pipe
【原文标准名称】: 高密度聚乙烯(PE)线管规格
【标准号】: ANSI/ASTM F2619-2011
【标准状态】: 现行
【国别】: 美国
【发布日期】:
ANSI/ASTM D3139-2011 柔性合成橡胶密封塑料承压管用连接件规格
【英文标准名称】: Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seal
【原文标准名称】: 柔性合成橡胶密封塑料承压管用连接件规格
【标准号】: ANSI/ASTM D3139-2011
【标准状态】: 现行
【国别】:
ANSI/ASTM E1355-2011 火焰模型预测能力评定指南
【英文标准名称】: GUIDE FOR EVALUATING THE PREDICTIVE CAPABILITY OF DETERMINISTIC FIRE MODELS
【原文标准名称】: 火焰模型预测能力评定指南
【标准号】: ANSI/ASTM E1355-2011
【标准状态】: 现行
【国别】: 美国
ANSI/ASTM E2183-2002 XML DTD设计、体系结构和实施惯例/指南
【英文标准名称】: Practice/guide for XML DTD Design, Architecture and Implementation
【原文标准名称】: XML DTD设计、体系结构和实施惯例/指南
【标准号】: ANSI/ASTM E2183-2002
【标准状态】: 作废
【国别】: 美国
ANSI/AAMI/ISO 10993-4-2002 医疗器械的生物评定.第4部分:与血液相互作用的试验的选择
【英文标准名称】: Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood
【原文标准名称】: 医疗器械的生物评定.第4部分:与血液相互作用的试验的选择
【标准号】: ANSI/AAMI/ISO 10993-4-2002
【标准状态】:
ANSI/ASTM E2233-2002 按Aql式编号的变量进行产品流抽样惯例
【英文标准名称】: Practice for Sampling a Stream of Product by Variables Indexed by Aql
【原文标准名称】: 按Aql式编号的变量进行产品流抽样惯例
【标准号】: ANSI/ASTM E2233-2002
【标准状态】: 作废
【国别】: 美国
ANSI E1.16-2002 娱乐技术.金属卤素灯镇流器动力电缆的结构标准
【英文标准名称】: Entertainment Technology - Configuration Standard for Metal-Halide Ballast Power Cables
【原文标准名称】: 娱乐技术.金属卤素灯镇流器动力电缆的结构标准
【标准号】: ANSI E1.16-2002
【标准状态】: 现行
【国别】:
ANSI/ASME B89.1.6M-2002 用作校准主环规和环规的合格普通内径测量
【英文标准名称】: Qualified Plain Internal Diameters for Use as Master Rings and Ring Gages, Measurement of
【原文标准名称】: 用作校准主环规和环规的合格普通内径测量
【标准号】: ANSI/ASME B89.1.6M-2002
【标准状态】: 作废
ANSI/ASTM D6070-2002 预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法
【英文标准名称】: Test Methods For Physical Properties Of Smooth-Wall, Coilable, Polyethylene Pe Conduit Duct For Preassembled Wire And Cable
【原文标准名称】: 预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法
【标准号】: ANSI/ASTM D6070-2002
ANSI/ASTM F2131-2003 密封管用聚氯乙烯薄试样摆锤冲击试验
【英文标准名称】: Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
【原文标准名称】: 密封管用聚氯乙烯薄试样摆锤冲击试验
【标准号】: ANSI/ASTM F2131-2003
【标准状态】: 作废
【国别】: 美国
ANSI ATIS0600403.03-2002 网络到用户设备接口.异步传输模式(ATM)的DS1物理层接口和映像规范
【英文标准名称】: Network and Customer Installation Interfaces - DS1 Physical Layer Interface and Mapping Specifications for ATM Applications
【原文标准名称】: 网络到用户设备接口.异步传输模式(ATM)的DS1物理层接口和映像规范
【标准号】: ANSI ATIS0600403.03-20
ANSI ATIS0700723-2002 I-CDMA扩频系统空中接口标准.3阶段文档
【英文标准名称】: I-CDMA Spread Spectrum Systems Air Interface Standard - Stage 3 Text
【原文标准名称】: I-CDMA扩频系统空中接口标准.3阶段文档
【标准号】: ANSI ATIS0700723-2002
【标准状态】: 现行
【国别】: 美国
ANSI ATIS0900105.06-2002 电信.同步光纤网络(SONET).物理层规范
【英文标准名称】: Telecommunications - Synchronous Optical Network (SONET) - Physical Layer Specifications
【原文标准名称】: 电信.同步光纤网络(SONET).物理层规范
【标准号】: ANSI ATIS0900105.06-2002
【标准状态】: 现行
ANSI ATIS1000630.a-2002 宽带综合业务数字网(ISDN).ATM适配层的恒定比特率业务功能和规范
【英文标准名称】: Broadband ISDN - ATM Adaptation Layer for Constant Bit Rate Services Functionality and Specifications
【原文标准名称】: 宽带综合业务数字网(ISDN).ATM适配层的恒定比特率业务功能和规范
【标准号】: ANSI ATIS1000630.a-2002
【标准
ANSI ATIS0600404.01-2002 网络和用户网络接口.ATM的DS3物理层接口和映射规范
【英文标准名称】: Network and Customer Installation Interfaces - DS3 Physical Layer Interface and Mapping Specifications for ATM Applications
【原文标准名称】: 网络和用户网络接口.ATM的DS3物理层接口和映射规范
【标准号】: ANSI ATIS0600404.01-2002
ANSI ATIS0600403.b-2002 ATIS-0600403.1999(R2007)标准补充件:网络到用户安装接口.DS1电接口
【英文标准名称】: Supplement to ATIS-0600403.1999(R2007) - Network and Customer Installation Interfaces - DS1 Electrical Interface
【原文标准名称】: ATIS-0600403.1999(R2007)标准补充件:网络到用户安装接口.DS1电接口
【标准号】: ANSI ATIS0600403.b-200
ANSI ATIS1000667-2002 智能网
【英文标准名称】: Intelligent Network
【原文标准名称】: 智能网
【标准号】: ANSI ATIS1000667-2002
【标准状态】: 现行
【国别】: 美国
【发布日期】: 2002
【实施或试行日期】:
【发布单位】: 美国国家标准
ANSI ATIS1000641.a-2002 电信.主叫姓名识别显示
【英文标准名称】: Telecommunications - Calling Name Identification Presentation
【原文标准名称】: 电信.主叫姓名识别显示
【标准号】: ANSI ATIS1000641.a-2002
【标准状态】: 现行
【国别】: 美国
【发布日期
ANSI ATIS0900105.05-2002 电信.同步光导网络(SONET).串联连接维护
【英文标准名称】: Telecommunications - Synchronous Optical Network (SONET) - Tandem Connection Maintenance
【原文标准名称】: 电信.同步光导网络(SONET).串联连接维护
【标准号】: ANSI ATIS0900105.05-2002
【标准状态】: 现行
ANSI ATIS1000674-2002 载体独立呼叫控制(BICC)能力设置1+(CS1+):信号传输转换器(STCs)
【英文标准名称】: BICC CS1+: Signalling Transport Converters (STCs)
【原文标准名称】: 载体独立呼叫控制(BICC)能力设置1+(CS1+):信号传输转换器(STCs)
【标准号】: ANSI ATIS1000674-2002
【标准状态】: 现行
【国别】: 美国
ANSI ATIS1000673-2002 载体独立呼叫控制(BICC)能力设置1
【英文标准名称】: Bearer Independent Call Control (BICC) Capability Set 1
【原文标准名称】: 载体独立呼叫控制(BICC)能力设置1
【标准号】: ANSI ATIS1000673-2002
【标准状态】: 现行
【国别】: 美国
【发布日期
ANSI ATIS0100503-2002 专用数字业务网络的性能参数.定义和测量
【英文标准名称】: Network Performance Parameters for Dedicated Digital Services - Definitions and Measurements
【原文标准名称】: 专用数字业务网络的性能参数.定义和测量
【标准号】: ANSI ATIS0100503-2002
【标准状态】: 现行
ANSI/AGMA 9009-D-2002 柔性耦合件.柔性耦合件术语
【英文标准名称】: Flexible Couplings - Nomenclature of Flexible Couplings
【原文标准名称】: 柔性耦合件.柔性耦合件术语
【标准号】: ANSI/AGMA 9009-D-2002
【标准状态】: 现行
【国别】: 美国
【发布日期】: